Used eccentric presses single column 55-99t for sale (115)

Condition: used, Year of construction: 1998, pressure 80 t throat 335 mm stroke 8 - 100 mm no. of strokes 60/90 Hub/min table surface area 900 x 670 mm hole in the table 280 x 200 mm dayligth max. 450 mm ram adjustment 80 mm ram surface 700 x 450 mm tool dimension, max 700 x 450 mm weight of tools max. 140 kg total power requirement 11,07 kW Ksdpfxjuild As Amzjlr weight of the machine ca. 6,5 t dimensions of the machine ca. BxLxH 1,72 x 2,0 x 2,82 m

Condition: used, pressure 63 t throat 315 mm stroke 16 - 125 mm max. distance table - ram 417 mm ram adjustment 70 mm no. of strokes 80 Hub/min table surface area 800 x 630 mm ram surface 500 x 400 mm total power requirement 6 kW Kodpfx Amotqm Dqezjlr weight of the machine ca. 5 t dimensions of the machine ca. 1,5 x 2,2 x 2,75 m

Year of construction: 1980, condition: used, pressure 80 t throat - mm stroke 50 mm table surface area 875 x 695 mm ram surface 350 x 355 mm ram adjustment 71 mm no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t dimensions of the machine ca. 2,0 x 2,1 x 3,2 m daylight (stroke down, ram adjustment above) 480 mm Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state Kljdpfx Ajdlcy Hemzer After the partial overhaul, the machine is safe for manual insertion open tool, a current UVV test is carried out before delivery and braking time measurement.

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control Kljdpfxjtycdks Amzsr cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode Klsdpjfx Hv Hofx Amzor selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Year of construction: 1979, pressure:64 t throat:315 mm stroke:8-100 mm no. of strokes:140 Hub/min table surface area:820 x 630 mm Kodpocxxmfefx Amzslr table height over floor:800 mm ram stroke - adjustable min/max:8-100 mm ram - range of adjustment:63 mm total power requirement:7,5 kW weight of the machine ca.:4,8 t dimensions of the machine ca.:1,45 x 1,70 x 3,10 m

Condition: used, pressure:70 t throat:250 mm stroke:10 - 120 mm table-size:750 x 500 mm dayligth:350 mm ram adjustment:350 x 200 mm Kodpecxxttefx Amzelr no. of strokes:50 Hub/min daylight:310 x 370 mm total power requirement:5 kW weight of the machine ca.:3,5 t dimensions of the machine ca.:1,3 x 1,4 x 2,5 m tilting eccentric press, tie-rod design with UVV movable protective screen, pneumatic clutch, quadruple led tappet, separate electric cabinet, central lubrication, electric two-hand operation, emergency cut-off

Condition: used, Year of construction: 1967, pressure:80 t throat:280 mm stroke:20-120 mm table width:710 mm Kledpfx Aocxxrhsmzor table depth:560 mm ram head dimension:560x355 mm ram adjustment:72 mm no. of strokes:125 Hub/min total power requirement:9,5 kW weight of the machine ca.:4,4 t

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm stroke:8-100 mm table depth:710 mm table width:500 mm ram head dimension:450x280 mm ram adjustment:63 mm no. of strokes:140 Hub/min total power requirement:7 kW Kodpfx Amocxxx Hezelr weight of the machine ca.:3,5 t

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T65 CNR4 Year of manufacture: 2002 Nominal force: 500 kN Mass: 5,000 kg Strokes per minute: 73 Maximum insertions per minute: 36 Operating air pressure min./max.: 4–5.5 BAR Braking time: 0.154 s Safety distance: 246 mm Energy: 3440 KJ Adjustable stroke min./max.: 10–120 mm Ram adjustment: 100 mm High shut height adjustment: 320 mm Maximum extraction stroke: 40 mm Worktable surface: 820x580x68 mm Ksdpfxox Ura Ss Amzelr Ram plate dimensions: 470x340 mm Distance between table and ram: 280 mm Shank diameter: 45 mm Slide from center: 280 mm Maximum die dimensions: 470x340 mm Upper die weight: 136 kg Voltage: 400 V Hydraulic overload protection Supplied with instruction manual and CE conformity Mechanical warranty: six (6) months Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor bearings; • Flywheel bearings; • Swivel joint bearings; • Countershaft bearings; • Clutch plates; • Clutch pins and flanges; • Clutch seals; • Hydraulic overload seal; • Hydraulic overload hose; • Equalizer cylinder seals; • Air gauges; • Front and side safety guards with safety keys; • Worktable reground on CNC machine; • Foot pedal; • Electrical panel with remote support.

Condition: new, Year of construction: 2025, pressing force: 80 t, table width: 600 mm, table length: 800 mm, table height: 850 mm, drop-through hole in table: 190 mm, ram adjustment: 85 mm, stroke adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 Kjdpjvxhb Uofx Amzslr o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 80 Tons Table-Ram Distance 400 Mm Distance Between Walls 880 Mm Ram Adjustment 85 Mm Press Approximate Width 1150 Mm Press Approximate Depth 1500 Mm Press Approximate Height 2500 Mm Table Hole Diameter 190 Mm Table Size 600 / 800 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/min. Engine Power 7.5 KW Engine Speed 1450 RPM Approximate Weight 6,500 Kg

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 23.05.5021, functionality: fully functional, pressing force: 61 t, stroke length: 100 mm, table width: 700 mm, table length: 500 mm, overall weight: 3,500 kg, TECHNICAL DETAILS Nominal force: 600 kN Single stroke: 32 strokes/min at 1,400 rpm Continuous stroke: 65 strokes/min at 1,400 rpm Distance ram–table: min. 265 mm / max. 365 mm Stroke: 0 – 100 mm Die depth: 250 mm Table dimensions: 500 x 700 mm Tool dimensions: max. 215 x 340 mm MACHINE DETAILS Air pressure: min. 4 bar / max. 6 bar Drive Motor power: 5 kW Motor speed: 1,400 rpm Flywheel speed: 1,400 rpm Electrical data Input voltage: 380 – 400 V, 50 – 60 Hz Total power: 5 kW at 380 V Kledpfxox Hyq As Amzjr Machine weight: 3,500 kg

Condition: new, Year of construction: 2025, power: 5.5 kW (7.48 HP), pressing force: 80 t, table width: 660 mm, table length: 860 mm, punching force: 80 t, drop-through hole in table: 180 mm, stroke adjustment: 110 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates via a force generated by an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for mass production. Key Advantages: - Stable stroke performance and high repeatability in serial production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot control Typical Applications: - Cold shearing and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided guided slide • Spheroidal graphite cast iron connecting rod and gear bushings • Crankshaft and transmission shafts made of 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Double-coil safety valve • Manually adjustable stroke • Finger–hand protection light curtain safety system • PLC control system • Dual-hand/foot control system • Mechanical locking system • Emergency reverse motor operation • Occupational safety regulation compliant • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounting pads • Touchscreen LCD panel (standard between 150–300 tons) • Hydraulic safety system (standard between 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One die set to requested specifications • Eight-way slide guides ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Ton Throat depth: 280 mm Bed–ram distance: 400 mm Slide–table distance: 420 mm Distance between side frames: 400 mm Ram adjustment (slide adjustment): 85 mm Approx. press width: 1400 mm Klsdovtx H Ropfx Amzer Approx. press depth: 1735 mm Approx. press height: 2220 mm Front anchor dimension: 670 mm Side anchor dimension: 1040 mm Table hole diameter: Ø190 mm Table size: 540×740 mm Die clamping hole diameter: Ø40 mm Ram size: 370×230 mm Bed height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approximate weight: 4000 kg Note: Please inform us if you require modifications in the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are directly managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, power: 5.5 kW (7.48 HP), pressing force: 60 t, table width: 590 mm, table length: 800 mm, punching force: 60 t, drop-through hole in table: 140 mm, ram bore: 40 mm, stroke adjustment: 100 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 60 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for serial production. Key advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement through centralized automatic lubrication - Production-ready operation with PLC control + dual hand/foot control Areas of application: - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-way guided slide • Spheroidal cast connecting rod and gear housings • Crankshaft and drive shafts in 4140 tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual coil safety valve • Manually adjustable stroke • Finger/hand protection safety system with light curtain • PLC control system • Dual hand/foot control system • Mechanical locking system Klodpfx Asvtx D Nemzor • Emergency reverse motor function • Conforms to occupational safety regulations • Compatible with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch screen LCD display (standard for 150–300 tons) • Hydraulic locking system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder and straightener • One custom die set as requested • 8-point slide guide ✅ TECHNICAL SPECIFICATIONS (60 TON) Capacity: 60 Ton Throat depth: 260 mm Table-to-ram distance: 360 mm Slide-to-table distance: 395 mm Distance between uprights: 380 mm Ram adjustment (stroke adjustment): 70 mm Approx. press width: 1340 mm Approx. press depth: 1450 mm Approx. press height: 2200 mm Front anchor dimension: 630 mm Side anchor dimension: 875 mm Table hole diameter: Ø150 mm Table size: 520×720 mm Die mounting slot diameter: Ø40 mm Ram size: 340×220 mm Table height from floor: 730 mm Stroke adjustment: 0–95 mm Strokes per minute: 50 spm Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2750 kg Note: Please contact us if you need modifications to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Year of construction: 1993, condition: reconditioned (used), TECHNICAL FEATURES: Press Model: T80 FNAR Serial number: 8932 Year of construction: 1993 Nominal force: kN 800 Kljdpfjk Rbykjx Amzor Weight: Kg. 5.000 Nominal number of strokes: 60 min. Operating air pressure: BAR 5.5÷6 Installed power: 4 kW Max stroke: mm.100 Hammer adjustment: mm.60 Stop position: P.M.S Voltage: V 380 Frequency :50Hz Auxiliary voltage: V 24 NEW COMPONENTS INSTALLED: • Pedal board; • Two-hand command; • Safety valve; • Accident prevention guards with safety keys