Used Edgebanders for sale (569)

Year of construction: 1995, Condition: ready for operation (used), machine/vehicle number: 585, Brand: Hebrock Model: AKV 1000 V Machine no: 585 Year of manufacture: 1995 Tech. data: Edgeband thickness max: 3 mm Edgeband height max: 50 mm Max feed speed: 7.5 m/min Fehsib H Slsxy Tk Ssgb With cutting knife Length of work table: 2200 mm Motor: 7 kW, 50 Hz, 230/400V, 3-phase Size for transport: Length: 220 cm Width: 115 cm Height: 150 cm Stock no: 2001164BXM

Condition: used, Year of construction: 1991, Used machine Year of construction 1991 Equipment and technical data: Edge banding machine for pre-coated edge material High-performance hot air blower Electromagnetic roller cutter Hebrock system edge trimmer End trimming: Trimming module for flush cutting the front edge overhang edge overhang Feed: 3-roller system Delivery on both sides Attachment trolley, mobile max. edge thickness approx. 1 mm Fgshxy Tkevimxgj Seb max. workpiece height approx. 50 mm min. Workpiece length approx. 170 mm min. Workpiece width approx. 50 mm Feed rate approx. 4 m/min. Ready for operation: approx. 1 minute Dimensions 1730 x 690 x1240 mm Weight approx. 115 kg Availability: short term Storage location: Hochheim

Condition: used, Motor power: 9.5 HP (7.0 kW), motor frequency: 50 Hz, chain conveyor, glue heating, pressure roller, combination trimming units, pressure beam adjustment, impact shears, glue roller, Attention: Edge feed out of function, as well as both snipping units, edge has overhang at the front and rear, which must then be worked in manually Fjhowhb Tzjxy Tk Sjgb

Condition: used, Year of construction: 2017, Edgeband thickness max: 12 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Feedrate max: 18 m/min Electromotoric height adjustment: Yes Top pressure by belt: Yes Glue system granulate: Yes Spraying device: Yes Premilling unit: Yes Type: left-side machine Machine length: 5.610 mm Control: BIESSE SMART TOUCH Fehxy Tswigtvok Sogb

Condition: used, machine/vehicle number: 006574, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Fgjhsvxxuxjxy Tk Seb Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes

Condition: new, Year of construction: 2024, Pre-milling unit: yes Pre-milling unit material removal: 0 - 2 mm plastic edges: 0,4 - 3 mm solid wood edges: 0,5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum length of workpiece: 120 mm Min. work piece width: 110 mm Anti-adhesive spraying unit: yes Edge preheating device: yes / with ceramic infrared lamp Fjhxysl D Rx Uj Tk Ssgb Bonding unit: granulat / Glue container quick-change kit Jack knife: yes Flush trimming unit: yes Corner copy unit: yes Flush radius milling unit: yes Radius scraper unit: yes Area scraper unit: yes Buffing unit: yes Cleaning spray unit: yes motor power: 5 kW machine length: 3774mm machine width: 1546 mm machine height: 1337mm weight: 842 kg

Condition: excellent (used), Bargains from company liquidation Switzerland Brandt KTD 68 CF joint milling machine Fjhxyjv T Tyro Tk Segb

Condition: used, Year of construction: 2022, Used machine Year of manufacture 2022 Technical data Workpiece length at least 210 mmEdge thickness 0.4 mm – 2 mmMotor voltage 3 x 400 VWorkpiece width at least 95 mmWorkpiece thickness10 mm – 45 mm Joining unit application-controlled – can be switched off Continuous edge feed via support plate Edge feed for roll materials from 0.4–2 mm thickness, strip edge banding with individual feed Gun shears for continuous edge material up to 2 mm thickness in hard PVC/ABS Glue unit Teflon-coated, 1.0 kg for hot melt adhesive granulate (~ 250lfm per 1kg granulate on a 19mm plate) Pressure unit mechanically pre-tensioned, 1 straight pressure roller and 1 pressure roller Gun shear unit with 2 cutting knives for end cutting Multifunctional milling unit 11,000 rpm, 0.37 kW, radius milling, chamfer milling for thin edges Tooling for radius 2 mm Radius scraper unit, mechanically switchable for R= 2 mm including chip collection box for scraper sections Polishing unit, 2 motors, 1400 rpm, 900 W Control panel with LCD display and keypad Workpiece transport via chain conveyor Feed speed 7 m/min (~ 250lfm/h) Extendable workpiece support Optional equipment Surface scraper, can be switched on mechanically Spray device for cleaning agent on polishing unit (!21/!30A) with infrared heating lamp for preheating the panel edge Availability: short term Fehxyowhuips Tk Segb Storage location: Hochheim

Condition: used, Year of construction: 2018, Comeva Compacta E 4T Edgebander with Pre-milling Description: Max / min edge thickness: 0,4-3 mm Pre milling unit Gluing unit Cutting unit End cutting unit with saw Machine sizes: 3900x800x1500 Weight: 1500 Kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Fohxy Tewgb I Njk Segb Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Code: 0043 Brand: VIRUTEX Model: MEB 50 - CE Standard Portable edge bander with glue pot for straight and curved workpieces complete with table for wood, pvc, abs, veneer edges - CE Standard Technical data: Watt 830 Single-phase motor Edge height mm 10-60 Fgshxy Tjv Dfziek Sob Edge thickness 0,4 - 3 mm Working temperature 170° Weight kg 8 Roll holder Table for edgebander mm 800 x 350 with extensions Table height mm 195 Weight 17 kg

Condition: not inspected (used), Year of construction: 1996, Edge banding machine IMA Compact S 312 Year of manufacture: 1996 Trimming unit, Fgjhxy Tsv Tkv Rok Sob radius, bevel, flush trimming unit, profile scraper, flat scraper, buffing unit Location: Arrives at the end of April at warehouse 54634 Bitburg - Free shipping - Sold as is, without warranty.

Condition: used, Year of construction: 2022, Workpiece return: Conveyor belt Edgeband thickness max: 3 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Places in coil magazine: 24 Glue system granulate: Premelting unit SCM Glue system QMS-P Premelter: Yes Quick-change glue pot: Yes SCM Glue system SGP Smart Glue Pot: Yes Suitable for PUR glue: Yes PUR Aufschmelzeinheit: interner PUR-Aufschmelzer SCM Glue system PU BOX L: Yes Spraying device: Yes SCM Spraying device AAP: Yes SCM Spraying device AAR Anti-adhesive spray unit: Yes Spraying device Cleaning agent: Yes Premilling unit: Yes SCM Premilling unit RT-X: Yes SCM Edsystem: Yes Preheating zone: Yes Andruckzone NC-gesteuert: Yes Trimming saw: 2 motors SCM Trimming saw YU/SP 1000: Yes Flush/radius/chamfer milling units: 2 SCM Flush milling unit R-E: Yes SCM Edsystem: Yes STEFANI Fine milling unit RSU-E: Yes SCM Multi Edge: Yes SCM Edsystem: Yes Corner rounding unit: 4 motors SCM Corner rounding unit ROUND 4: Yes SCM Multi Edge: Yes Nutfräsaggregat: Universalfräsaggregat schwenkbar, Zwei Aggregate SCM Grooving unit MX 80: Yes Scraper unit: Profile scraper, Flat scraper SCM Scraper unit RC S-E: Yes SCM Multi Edge: Yes Fgshjwhfb Noxy Tk Seb SCM Scraper unit RC-E MULTILEAF: Yes Buffing unit: Yes SCM Buffing unit SP F: Yes Finishing aggregate: Hot air Suitable for nesting: Profile scraper, Bündig/Radius/Fasestationen Aggregates actuated by control: NC-axes Profilwechsel automatisch: Bündig/Radius/Fasestationen, Profile scraper, Eckenkopieraggregat Type: left-side machine Infeed automatically: Yes Batch size 1: Yes Barcode reader: Yes SCM Easy Size: Yes Control: SCM eye-M Control cabinet cooling: Yes UPS - Uninterruptible Power Supply: Yes Software: SCM MAESTRO ACTIVE EDGE Conformity marking: CE mark

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Fgehxyowhi Sls Tk Ssb Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Condition: used, Year of construction: 1998, Edge Banding Machine Built in 1998 At 5500 mm long, the Quadromat is the shortest edge banding machine available. With its integrated workpiece return, it enables complete processing of edge materials. Not only are the long edges milled within the machine, but the front edges are also copied, thus completing the processing. The finished workpiece is returned to the operator, eliminating manual rework. With PLC control with up to 20 processing programs Workpiece Dimensions Minimum width 60-80 mm (depending on the edge material) Minimum length 150 mm Workpiece thickness 10-50 mm Edge band thickness 0.4-12 mm Minimum edge band length 400 mm Feed rate 18 m/min. With 2 jointing motors With multifunctional milling unit (flush, bevel, radius) With scraper With miter saw With 2 glue pots (for transparent and white) and 1 spare pot Compressed air connection 7-10 bar Fehxy Tsvymfbsk Segb Extraction connection 160 mm Weight approx. 2400 kg Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 2016, Vitap Eclipse Edgebander for round shaped, curved workpieces Semi-automatic edge banding machine for large round or curved workpieces with a panel thickness between 10 and 60 mm and a belt thickness between 1 and 3 mm. The 60 mm height is only possible with an edge banding thickness of 1 mm. If the edge band is thicker, it depends on the quality of the band and must be tested beforehand in connection with the cutting unit. Description; Two copy rollers for the shape of the workpiece to be scanned Fgshxy Tewgb Hxek Sjb Gluing station Glue tray with a capacity of 1 kg Two 800W heating elements with electronic temperature display via the PLC Glue application via glue roller Glue tray made of aluminum for heat distribution Glue supply can be adjusted by means of a button Automatic cutting unit for edge banding material on the roll from 3 to 45 mm Aggregate is activated by a sensor for closed edge tape with a perfect connection or by an encoder if only 1 side is pasted Laser system for length determination, no pre-measurement necessary On-off capability for throughput Height-adjustable table for narrow panels On-off capability for milling aggregate Two copy rollers for the shape of the workpiece to be scanned Milling unit equipped with 2 x 0.5 kW (15000 rpm high frequency) with top, bottom and front copy rollers Milling unit equipped with blades R=2, Phase 15°, D=69, Z=6 Large panel turntable with vacuum to hold product (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Code: 0465 Brand: IDM - SCM GROUP Model: IDIMATIC 49-20 Automatic edge bander for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various Technical data: Min/max gluing height mm 10/50 Min/max edge thickness mm 0,4/20 Min panel width mm 60 Min panel length mm 140 Adjustable feed speed m/min 12/18 Electric press lift Telescopic support for large panels Soundproof cabin Composition: Anti-adhesion unit: spreads anti-adhesive liquid on the upper and lower surfaces of the panel Gluing unit with pre-melting unit Pressure rollers End trimmer unit for front and rear vertical cutting of excess edging - N° 2 motors 0,5 Kw at 12000 rpm - Tool diameter mm 110 Top/bottom trimmer unit with superimposed motors for trimming the upper and lower sides of the excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Top/bottom trimmer and beveller unit for final upper and lower trimming of excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Manual turret device - automatic positioning of the tool post and front copiers according to the different edge band thickness Fehjvhc E Hsxy Tk Ssgb Routing unit makes through holes and non-through holes in the edged side and on the upper and lower parts of the panel and is time controlled Cleaning unit for brushing and polishing of the edge bands applied - N° 2 motors 0,18 Kw at 1400 rpm which can be inclined vertically between 0° and 30° Compressed air 7-8 bar Overall dimensions mm 5600 x 1000 x 1500 h Weight kg 2500

Condition: used, Year of construction: 2020, Workpiece return: Conveyor belt Edgeband thickness max: 12 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Fohxyswhfb Aj Tk Sjgb Feedrate max: 20 m/min Continuously variable feed: Yes Glue system granulate: glue pot above feeding chain Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 6.055 mm Infeed barrier: Yes Control: SCM eye-M Conformity marking: CE mark Weight: 2.820 kg

Condition: used, Year of construction: 2009, Used machine Year of manufacture 2009 Condition: workshop overhauled, well maintained Equipment and technical specifications: - CE mark - Working height 8-60 mm - Glue thickness 0.4-12 mm - Rotating control panel with "StarTouch" PLC line control, 12" color touchscreen including "Telesolve" remote maintenance and diagnostics - Anti-adhesive spray unit in front of the milling unit - Pre-milling/joining unit "RT-E" with 2 high-frequency motors, DIA cutters, and "EASY-SIZE PLUS" device (electronically controlled infeed guide) - Glue unit "VC 1000" up to 12 mm thickness with pre-melter (replaceable rapid heating tank, Teflon coating, with second glue tank for PUR glue) - Nitrogen storage box for PUR glue tank, fill level monitoring with sensor, "iGlue" kit for control Glue container above the desk - Cross-cut saw unit "K/SEL" with horizontal adjustment, two independent high-frequency motors, pivoting with tracer rollers and extraction hoods on both motors (controllable from the desk) - Tiltable flush trimming unit "RI/1000" 0-20° tiltable, pneumatic positioning, two independent high-frequency motors, high-performance extraction hood "ED-SYSTEM" (controllable from the desk) - Rounding unit/corner rounding unit "ROUND K" with "4 Edge" KIT, pneumatic positioning from the desk for quick edge thickness changes, two high-frequency motors, tracer rollers, unit runs on prism guides with ball-bearing pressure pads, R=2.5 mm - Scraper unit "RAS/V" with tracer rollers, R=2 mm - Sprayer for finishing, in front of the flat scraper and brushing unit - Flat scraper "RCL", tracer rollers, blower nozzles for cleaning Pneumatically controlled - "SPN" brush/buffing unit, 2 independent motors - Whitening unit/Leister hot air gun, with nozzles at the top and bottom - "AUTOSET" function, all necessary adjustments can be made from the control panel, pivoting of the miter saw blades, remote adjustment of the flush trimming units, 2 positions for the ROUND K unit, remote adjustment for the scraper unit, spacers on the infeed guide, electronic positioning of the upper pressure beam, electronic positioning of the pressure rollers, interior lighting of the cabin, all tools with reversible inserts, edge monitoring sensor, all important units are application-controlled, automatic central lubrication of the feed chain Fgshxyswhulds Tk Seb - Former list price: €104,250 Location: Langen Availability: Short term

Condition: good (used), Code: 0473 Brand: SCM Model: OLIMPIC K 500 T/ER-2 - Norme CE Fohxsvkdtwsy Tk Sogb Automatic edge bander with grinding unit for wood, veneer, pvc, melamine, abs edges, for furniture, joinery, custom furnishings, panels, kitchens, bathroom furniture and various - CE Standard Features: Min/max panel height mm 8/60 Panel height with Round group mm 10/45 Edge thickness mm 0,4/8 Roll edge thickness mm 0,4/3 Min panel width mm 55 Feed speed mt/min 11 Presser with motorized vertical adjustment Panel support shoulder Soundproof protection booth Incoming liquids Composition: Anti-adhesive unit consisting of two nozzles for spray application of the liquid - Two containers with anti-adhesive release liquid Grinding unit with 2 high-frequency motors - Diamond tools H64 MM - Diameter mm 100 F 30 h 65 - Copying kit for grinding unit Gluing unit VC 560 for edge application on panels up to 60 mm - Glue pot capacity kg 1,5 - Interchangeable pot End cutting unit - 2 independent motors each Kw 0,35 at 12000 rpm - Motor inclination from 0° to 15° - N° 2 blades diameter mm 115 - Front copiers Tilting Trimming Bevelling unit - to remove top and bottom excess edge - N° 2 motors Kw 0,55 - 12000 rpm - Inclination from 0° to 25° - Kit 2 pneumatic positions for quick change of processing from thin edges to radius edges Rounding unit with 2 motors sliding on prismatic guides - It performs both rounding and trimming of thin and thick edges - N° 2 motors each 0,55 Kw - 12000 rpm Edge Scraping unit for optimal finishing of Abs/Pvc edge complete with rotating copiers and suction hoods with chip collection box Glue Scraping unit - for removing glue residue from the bottom and top surfaces of panels Brush unit for perfect cleaning and polishing of the plastic material edge - Motor each Kw 0,25 - Brush diameter mm 150 Phon unit for Pvc/Abs edges Compressed air 7 bar Overall dimensions mm 5500 x 1150 x 1550 h Weight kg 1780

Condition: used, Year of construction: 1996, Used machine Year of construction: 1996 with heated infeed rail Gluing station with electronic temperature control Fjhxy Tkskwg Tbe Segb and synchronized and counter-rotation function - Snipping unit - Trimming unit - Profile scraper - Cleaning station - Edge thickness 0.4 - 5 mm - Panel thickness up to 50 mm - Part length min. 150 mm - Part width min. 60 mm - Workpiece thickness 8 - 50 mm - Feed rate 12 m/min L x W x H approx. 4000 x 1260 x 1600 mm (width can be reduced to 800 mm for shipping by by removing the removable support) Availability: by arrangement Storage location: Hochheim

Condition: not inspected (used), Code: 0256 Brand: STEFANI Model: ACTIVA 1-73 - CE Standard Automatic edge bander with grinding unit for edges in wood, veneer, pvc, abs, furniture and various - CE Standard Technical data: Edge thickness min/max 0,6-25 mm Coil material thickness min/max 0,3-3 mm Min/max panel height mm 10-60 Min panel width mm 70 Automatic pressure bar lifting Feed speed variator 8-30 mt/min Controlled guide before grinding Group of 2 grinders for panel grinding - N° 2 motors - Suction mouth diameter 120 mm Glue tank pre-melting unit Gluing unit: N° 1 pneumatic pressure roller diameter 180 - N° 3 pneumatic pressure rollers diameter 100 Soundproof protection cabin Tilting end cutting unit - Diameter of blades mm 140 - Rpm 12000 Trimming unit: Tool diameter mm 80 - Motors Kw 0,75 - Rpm 12000 Bevelling unit : Tool diameter mm 80 - Motors Kw 0,75 - Rpm 12000 Fohstpgtwexy Tk Sogb Rounding unit with 4 motors : Motors Kw 0,35 - Rpm 12000 Edge Scraping Unit Oscillating sander - Motor Kw 1,5 - Rpm 1400 Brush unit: Motor Kw 0,3 - Rpm 1450 Track speed variator Compressed air 6 bar Overall dimensions mm 8200 x 1500 x 1650 h Weight Kg 3500 Machine NOT reconditioned

Condition: good (used), Code: 0078 Brand: FRAVOL Model: RX 300 - CE Standard Fehxy Tov Tnpnok Ssgb Automatic edge bander with grinding unit for EVA - PUR - POLYURETHANE glue, with grinding unit for application of PVC, Abs , melamine , veneer , strip and roll edges, for joinery workshops, custom-made furniture, naval furniture, doors, panels, kitchen furniture, bathroom furniture - CE Standard Technical data: Panel height mm 10-120 Edge height mm 120 Panel width min mm 60 Edge thickness mm 0,4-16 Variable feed 10/20 mt/min Microprocessor control (PLC) - Touch screen 10,7 Colour Grinding unit consisting of n° 2 iPre-milling units - Motors each 2,2 Kw - Rpm 6000 IR Lamp - 0-600 degrees - Watt 600 Automatic edge loader Universal gluing unit with pre-melting Quick release Roll edge cutting Glue tank cleaning bench Two motor end trim - Motor power 0, 50 kW each - Rpm 12000 Tilting trimming unit - Motor power each Kw 1,1 - Rpm 12000 Diameter of suction mouths: n° 1 diameter mm 120 - n° 3 diameter mm 80 Fixed roller conveyor for supporting large panels Compressed air 6 bar Installed power Kw 9,4 Overall dimensions mm 4880 x 1040 x 1910 h Weight kg 1600

Condition: good (used), Code: 0036 Brand: CASADEI INDUSTRIA Model: V 20/10 R - CE Standard Fgshxevz S Svsy Tk Sob Automatic edge bander for pre-glued edges on straight panels - CE Standard Technical data: Automatic feeder for panel advancement Automatic end trimmer for front and rear edge trimming Automatic trimmers - Speed rpm 9000 - cutters diameter mm 70 Z=4 Panel thickness min/max mm 10/50 Roll edge thickness mm 0,4-2,5 Edge height min/max mm 12/52 Feeding speed mt/min 5 Total power 4 Kw N° 2 suction inlets diameter 60 mm Overall dimensions: mm 2300 x 700 x 1250 h Weight kg 350

Condition: good (used), Code: 0042 Brand: FRAVOL - ITALY Model: A 16 ACR - CE Standard Edge bander for pre-glued edges with trimming unit for straight and curved panels - CE Standard Technical data Min/max panel height mm 10/60 Fohsv Ay Hkjxy Tk Sogb Feed speed mt/min 3,8 Temperature regulator 0-500° Voltage 220 Installed power 3700 Watt Upper/lower trimming unit Overall dimensions mm 950 x 600 x 1000 h Weight kg 120

Condition: good (used), Code: 0015 Brand: FRAVOL - ITALY Model: RAPID RX 700 - CE Standard Automatic electronic edge bander for EVA - PUR - POLYURETHANE glue, with grinding unit for applying Pvc, Abs , melamine , veneer , solid strip and roll edges, for joinery workshops, custom furniture, naval furniture, doors, panels, kitchen furniture, bathroom furniture - CE Standard Panel thickness min/max mm 10/120 Panel length min mm 140 Panel width min mm 60 Edge thickness mm 0,4 - 16 Variable feed 10-20 mt/min Automatic presser lift Composition: Touch Screen electronic control 10,7" colour Controlled axis infeed guide Fgshsvutm Ioxy Tk Sjb Group 2 incoming grinders for perfect panel grinding - Motors Kw 2,2 - Rpm 6000 - Diamond tools mm 100 x 120 x 30 Infrared lamp 0-600 degrees - Watt 600 Cooling anti-adhesive spray system Edge height mm 120 Automatic edge loader Universal gluing unit with pre-melting unit for polyurethane glue and EVA glue - Quick release glue pot - Controlled axis pressers Roll edge cutting 3 mm Pvc/Abs Glue pot cleaning table End cutting unit with 2 tilting motors each 0,50 kW - 12000 rpm Tilting trimming unit with controlled axis - Motors Kw 1,1 - Rpm 12000 Rounding unit with 2 motors with controlled axis - Motors Kw 0,22 - Rpm 12000 Scraping unit with controlled axis Glue scraping unit Brush unit - Motors 0,18 Kw - Rpm 1400 Dryer unit 0-600° - 4000 watt Soundproof booth Fixed panel support roller conveyor Suction n° 7 inlets diameter 80 - N° 1 inlet diameter 120 Installed power Kw 22 Compressed air 6 bar Overall dimensions mm 6730 x 1500 x 1910 h Weight kg 2400