Used Edgebanders for sale (573)

Condition: used, Year of construction: 2018, Used machine Dkjhsnbiplsxy Tk Sel

Condition: used, machine/vehicle number: 006849, Type of edging: Thin edge, Thick edge, Solid wood Dkshxy Tkowd Itms Ssl Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2015, AUTOMATIC SINGLE-SIDED COMPACT EDGE BANDER K 560R No. AH/118547 MAIN FEATURES GLUE ROLLER: OPTIMAL GLUE JOINT FLUSH MILLING UNIT WITH 3 POSITIONS: FAST CONVERSION BETWEEN THIN, THICK AND SOLID WOOD EDGES TOUCH 7 CONTROL: ONE TOUCH IS ENOUGH TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge bander for gluing the edges with hot melt adhesive on the four sides of straight panels and for subsequent milling. Cold-rolled steel frame in a box construction, for high rigidity and freedom from vibration. Openings with chutes for unloading any remaining chips at the bottom. Pressure beam made of thick-walled steel construction and with steel columns, for a vibration-free structure where the working units are attached. Rollers on the double row feed chain, made of rubber with a high friction coefficient and sliding on bearing-mounted rollers. Device to protect the pressure rollers from any residual chips. Manual adjustment of the pressure unit at the machine inlet, with numerical control. Working units fixed to the pressure beam or mechanically linked to ensure automatic adjustment when changing panel thickness. Working units fixed to the lower longitudinal beam, for a precise reference in relation to the panel. All high-frequency motors are connected via frequency converters (inverters). Tool hood along the entire length of the machine, with polycarbonate window for a good overview of the units during processing. Two separate hoods are provided for access to the working units; The first with electrical locking for the pre-milling unit and gluing unit, the second with electromechanical locking for all other outlets, located on the pivoting control panel in an ergonomic position. The electrical system complies with current regulations. The electrical components are housed in the machine frame, with a door for easy access in case of panel failure. Panel feeding is carried out via a feed chain consisting of high-friction rubber sliders on a 1-1/4" industrial chain. The chain slides on two hardened steel guides, one round and one flat, to ensure linear advancement and protect against lateral misalignment. Manual lubrication of the external bearing roller conveyor positioned along the entire length of the machine; it consists of a telescopic opening system with sliding on linear bearings and plastic rollers with pivot pins. CONTROL SYSTEM "Touch 7" Control System. Main features: – 7" - 16:9 wide color touchscreen – Graphic representation of all processing units and their status (ON/OFF) – Graphic simulation of the machining operations to be carried out on each side of the panel– 60 work programs with direct configuration by the operator– Control of the machining units and automatic activation of the motors– Complete control of the machine through the PLC function and the encoder positioned on the pinion of the feed chain– Setting and regulation of the temperature of the glue pot– Selection of longitudinal and transverse machining without changing the program– Simple and guided diagnostics for easy error correction– Statistics on absolute data and individual machining operations: number of pieces, Dshxjvvkdmsy Tk Sskl

Condition: not inspected (used), With glue specification for wood and plastic edges 0.4 - 2.0 mm, (for panel thicknesses over 25 mm, max. edge thickness 1.5 mm, workpiece thickness 10 to 45 mm, min. workpiece length 180 mm, min. workpiece width 65 mm, Dkohxy Tewgc N Uok Sjl feed speed 5 m/min., dimensions 2040 x 1350 x 1290 mm, unrefurbished as seen from the Seevetal location, subject to prior sale

Condition: new, Functionality: fully functional, The new cart for the management and cleaning of the glue pots installed on the SCM edgebanders solves the difficulties associated with the use of polyurethane glue altogether. Machine downtime, occasional use of PU glue, cleaning, and glue waste will no longer be a problem. Just insert the glue pot directly into the particular tank, start the automatic maintenance cycle and the job is done Dshxy Tksqu N Efj Sekl

Condition: used, Year of construction: 2019, Functionality: fully functional, 2019 model with old control system and slight paint damage. (The photos are product photos and do not depict the original machine.) Slight signs of wear may occur. Convenient and easy control of all important functions via the front control panel Excellent accessibility to the working units thanks to the large hood, which provides additional protection and noise reduction Precise and proven units enable optimal processing and perfect edge finishing Pre-milling unit equipped with two dia-milling cutters High-frequency motors for edge processing Equipped with radius and flat scrapers as standard Optionally expandable with either a buffing or grooving unit with a groove width of up to 4.0 mm Available in various configurations to adapt to individual requirements Automatic temperature reduction of the glue unit when the machine is idle for extended periods Standard equipment includes an aluminum glue container for EVA hot melt adhesive Dimensions and Weights Length (product) approx. 3314 mm Width/Depth (product) approx. 1085 mm Height (product) approx. 1300 mm Weight (net) approx. 545 kg Flush radius trimming unit Flush radius trimming unit power input 2 x 0.35 kW Flush radius trimming unit cutter diameter HM 55.3 mm Flush radius trimming unit cutter speed 12,000 rpm Flush radius trimming unit extraction nozzle diameter 60 mm Flush radius trimming unit number of extraction nozzles 2 Corner rounding unit Corner rounding unit power input 0.35 kW Corner rounding unit tool diameter 58 mm Corner rounding unit speed 12,000 rpm Electrical data Connection voltage 400 V Mains frequency 50 Hz Glue unit Glue pot power input 0.18 kW Glue pot operating temperature 190 °C Glue pot extraction nozzle diameter 60 mm Glue pot capacity 0.8 kg Pneumatic connection Operating pressure 6.5 bar Feed Feed input power 0.55 kW Feed speed 7 m/min Edges Edge thickness for rolled material 0.4 - 2.0 mm Dkshxewg Abdoy Tk Sel Edge thickness for strip material 0.4 - 3.0 mm Pre-milling unit Pre-milling unit extraction nozzle diameter 2 x 80 mm Pre-milling unit input power 2.2 kW Pre-milling unit cutter speed 9000 rpm Pre-milling unit diamond cutter diameter 80 mm Pre-milling unit cutter height 56 mm Pre-milling unit material removal 0.5 / 1 / 1.5 / 2 mm Scraper units radius scraper 2 mm Buffing unit Buffing unit input power 2 x 0.14 kW Buffing unit speed 2800 rpm Workpiece Workpiece thickness 8 - 50 mm Workpiece length min. 120mm Workpiece width min. 110mm Equipment ----- - 730mm roller edge turntable - Anti-adhesive spray unit - Pre-milling unit with two dia-milling cutters - Edge preheating device - Glue container quick-change kit - Gluing unit - Corner rounding unit - Flush radius milling unit - Radius scraper unit - Flat scraper unit - Buffing unit

Condition: excellent (used), Year of construction: 2020, Single-sided edge bander Homag Edgeteq S-300 (Optimat KDF 440C) Year of manufacture 2020 Incl. workpiece return system Ligmatech TFU140/R/25/10/055 Year of manufacture 2017 Edge band thickness max. 8 mm Panel thickness max. 60 mm Roll material thickness max. 3 mm Feed rate min. max. 8-14 m/min Homag Powertouch 15.6" control system Application unit QA65 N 1200 / 1400 CONSTRUCTION ELEMENTS EDITION PACKAGE KDF 440 / 450 Equipment packages / units RELEASE AGENT SPRAY UNIT WORKPIECE Dkehxy Tewcdxvok Sol JOINING UNIT 2 x 2.2 kW 200 HZ Joining Milling Cutter Set 40mm Blow-Off Device for Jointing Milling Unit Workpiece Preheating IR Emitter Applying Unit QA65 N 1200 / 1400 Edge Magazine for Rolled Materials, Fixed Lengths Pressure Zone with 2 Post-Pressure Rollers S-240/S-300 Software Preparation for Lubricant Trimming Unit 2 x 0.22 kW Software Preparation for Antistatic Solution Multi-Stage Milling Unit Tool for Multi-Stage Milling Unit Shape Milling Unit 1 x 0.35 kW Tool for FF6210 MZ40 Multi-stage Profile Scraper Unit Carbide Steel for 2-stage Multi-stage Scrapers Glue Joint Scraper Cleaning Agent Spray Unit for Workpiece Buffing Unit with 2 Motors Free-Standing Air Cushion Table Infeed Ruler Workpiece Support VARIABLE FEED RATE 8-14 m/min Automatic Central Lubrication of Chain Conveyor ROLLER TOP PRESSURE ELECTRIC HEIGHT ADJUSTMENT TOP PRESSURE S-240/300

Condition: used, machine/vehicle number: 007834, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR, Hot Air Premilling Unit: yes Dkshxyev Sf I Es Tk Sjl Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, Year of construction: 1994, Storage location: Nattheim Dshxjvvkdtjy Tk Sekl

Condition: used, Year of construction: 2021, operating hours: 2,326 h, Functionality: fully functional, USED EDGE BANDING MACHINE EDGETEQ S-380 + XES 200 Advantages Pre-melter for pur EVA glues (beer krug HOMAG) XES 200 pre-heating and cleaning station Air table Unit for application of release, antistatic and cleaning agents Sprayers for application of lubricant MZ40 multi-stage scraping unit Warranty on mechanical parts TECHNICAL DATA Feeding and unloading of the element Cushion table in front of the machine Unit for application of release agent Pre-milling unit 2x 2.2 kW Variable feed 8–18 m/min Edge banding: EVA glue melter QA65 N glue application unit (replaceable) Edge magazine with rollers (automatic edge feeding from the desktop) 3-roller pressure zone Dehxy Towhk Egjk Sjkl Lubricant application unit Element finishing: Cutting unit Milling unit (profile edges) Multifunctional rounding unit Automatic profile scraper MZ 40 (R1/R2, controlled from the desktop) Flat scraper Cleaning agent application unit Top+bottom polishing unit Lubricant sprayer

Condition: good (used), Year of construction: 2011, machine/vehicle number: 0-200-23-3741, The machine has been in use so far and has produced good results. Dshjumngvexy Tk Sskl

Condition: used, Year of construction: 1989, Used machine Dohxy Tsquyayek Sskl Year of construction: 1989 Condition: Functionally tested Equipment and technical data: Glue thickness max mm 20 Gluing height max mm 51 Roll material thickness max mm 3 Workpiece length min mm 140 Workpiece width min mm 60 Glue system 1906 cartridge Printing unit Trimming unit 1920 Flush trimming up to 20 mm Chamfer trimming Space requirement LxWxH mm 3150x1800x1375 Weight approx. kg 800 Location: Hochheim Availability: Short term

Condition: used, machine/vehicle number: 007812, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Grooving Unit: yes Dkjhxy Tov Sldaok Sel Maximum panel thickness: 90 mm Operating Units: 6 nr

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Dehxy Tkovvkd Tj Sokl

Condition: new, Year of construction: 2024, MACHINE SEEKERS ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. ----- Dkshxy Tsrucb Sek Sel New machine Year of manufacture 2024 Equipment and technical data: Basic machine 1057 XL C with Beckhoff touch screen control Extendable workpiece support 600 mm Extension of extendable boom Infeed ruler standard 3 LED lights in the infeed Joining milling unit 2-motor DIA joining milling cutter 70 x 64x 30 mm Z2+2 Link. and clockwise rotation Edge feeder 1903 fully automatic Glujet 301 adhesive application system Automatic reloading function Storage slot for 1.4 kg cartridges (4 cartridges) GluJet collection container Printing unit 1912-3 pneumatic Spray device GM 201 after printing unit Capping unit 1918 pneumatic Extraction hoods for Capping unit Combination milling unit FR201 with DIA milling cutters R=2 mm Form milling unit 1832 Shelf program Radius scraper ZK 301 Chip catcher box Surface scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short term Location: Hochheim

Condition: used, machine/vehicle number: 007793, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Maximum panel thickness: 60 mm Djhjv Tfydsxy Tk Sjkl

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Dkjhxy Tjvvkfdek Sel

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05 Dkjhxyjvxb N Ss Tk Sjl

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Dkohxovvkfqey Tk Ssl Storage location: Nattheim

Condition: used, machine/vehicle number: 007647, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON1445 B Dehxyovxb Nle Tk Sekl Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON1445 B

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Djhxy Tksvvkfwe Sskl Storage location: Nattheim

Condition: used, Year of construction: 2001, Max. edge band thickness: 0.2 - 12 mm Min. workpiece thickness: 8 mm Max. workpiece thickness: 42 mm Min. workpiece width: 70 mm Feed speed 1: 12 m/min Heat-up time: approx. 8 min Joining unit: Yes, with 2 milling units Automatic roll magazine: Yes Trimming shears up to: 3.0 mm Solid edge magazine: Yes Gluing: Glue pot with granulate on top Trimming saw: Yes, double trimming unit Flush trimming unit: pneumatically adjustable Chamfer and radius milling unit: pneumatically adjustable with interchangeable motors Rounding unit: pneumatically adjustable (corner rounding) Profile scraper: pneumatically adjustable Flat scraper: Yes, scanning Buffing unit: oscillating Unit display: Digital Control type: Section control/PLC Operation: Screen/PC control Extendable Roller support: Yes. Protective cover: Yes. Working height or feed table height: 800 mm. Approx. weight: 2100 kg. Dimensions: 5300 x 950 x 1300 mm. Motor power: 12 kW. Storage location: Customer. Dkjhxjvvkdasy Tk Sjl

Condition: used, Year of construction: 1998, For stationary form milling of head edges on soft and postforming workpieces. As well as for erasing on thick PVC edges on rectangular workpieces and multi-sided machining of symmetrical and asymmetrical soft and postforming profiles, this is possible after manual profile depth adjustment. The motor is manually controlled by scanning on the workstation. Equipment: - Workpiece stop system - Pneumatic clamping cylinder - 1 0.8 kW milling motor, continuously adjustable up to 27,000 rpm, equipped as standard with a radius cutter R=3. Scanning is performed by a guide ring on the workpiece. - Unit guide on precision circular guides. Specifications: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on edge material) Milling tool: Radius cutter R 3 Electrical connection: 230V / 50Hz / 1Ph Total connection: 0.8 kW Pneumatic connection: 6 bar Space required: approx. 740 x 460 x 500 mm Net weight: approx. 45 kg plus base Storage location: Nattheim Dehxjvvkgbsy Tk Sskl

Condition: used, Year of construction: 2001, with return Dohxy Tjvvkdgok Sskl Storage location: Customer

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Storage location: Nattheim Dkjhovvkg Iexy Tk Sel