Condition: used, machine/vehicle number: 006374, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr Csln Hel Txv Ej Uhnjgt

Condition: used, Year of construction: 1988, From a training workshop or government agency Celn H Uswbi Exohnogt Pivoting for long workpieces Used, good condition Make: Gea Type: Kapre 3000 Year of manufacture: 1988 Single-sided from below Press cylinder Heating rails: 1 piece Working length: 3000 mm Pneumatic Mobile Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: new, Year of construction: 2023, Molding edge banding machine Year of manufacture 2023 with direct gluing to the edging material Workpiece thickness 8 - 50 mm Edge thickness 0.4 - 3 mm Workpiece width min. approx. 30 mm Workpiece length min. approx. 200 mm Electrical connection 230 V Total connection 3 kW Heating power glue pool ca. 2,7 kW Pneumatic connection 6 bar inner radius 25 mm (special designs possible) Weight approx. 165 kg Working height approx. 885 mm Colnel Ebylj H Uhnjgt Dimensions approx. 810 x 610 x 885 mm without foil plate Availability: Short term Storage location: Hochheim

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description with hot melt adhesive indication on the workpiece for edge material up to 3 mm 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit, maintenance-free, coated glue pot, HF - trimming station (16,000 rpm) for front and rear edge overhang, HF - trimming station (16,000 rpm) with interchangeable plate cutter (combined version) and fine cutter adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged Control panel, double roller top pressure beam, unit viewing window from the rear of the machine and operator side, PLC control including touchscreen. Technical data: - Feed speed 10 m / min. - Panel thicknesses from 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point - pneumatic cutter adjustment 1 piece Switching radius - flush / chamfer for the combination milling stations The changeover to chamfer or flush is done manually by flipping the stop flap in the machine. Cleaning station (buffing) 1 piece Corner rounding cutter 1 piece including combination tool and pneumatic adjustment chamfer / radius Maximum workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 piece including pneumatic excavation device Radius R 2.0 mm Surface scraper 1 Unit with pneumatic application control. Glue station change system including a second glue pot and downward glue outlet. 1 unit for quick color changes. Grooving unit horizontally mounted in the edge. 1 unit including pneumatic lifting device and grooving tool. Separate extraction system for the joining unit. 1 unit directly mounted on the joining unit, vertically upwards, d=80mm. For optimal extraction performance, highly recommended from AKV 3005 DK-F. Ball bearing for corner rounding cutter 24.1mm. 1 unit. Ball bearing for corner rounding cutter 24.2mm. 1 unit. 0.37 kW interchangeable motor for corner rounding cutter. 1 unit with quick-change device including radius cutter R 1. Interchangeable spindles (1 set = 2 units). 1 unit. 1 set of quick-change motors for longitudinal processing, top and bottom, including tool R 1. Compressed air consumption: 100 - 150 l/h. Csln Hjwblcto Uhnjgt Storage location: Supplier

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 40 Working width (min/max) mm 225 / 2500 Numerical Control POWERCONTROL PC23 Power Touch /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 1000 Working line (work units support tables), manual adjustment mm 30 – 80 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) + Free Space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + QA65 Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL PK30 (2 x kW 0,8), speed 30 m/min Rough Trimming unit BF20 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FF30 + FF32 (4 x kW 0,4) with FlexTrim Free Space Profile edge scraping unit PN 20 Cjlov Rpdnjn H Uhnegt Finish processing unit (Glue scraper + Buffing unit) FA 21. Spraying Unit (for polishing liquid) No. 3 Milling grooving unit SF20 (1 x Left + 2 x Right) (3 x kW 6,6) (N.C. adjustment)

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, edge thickness (max.): 8 mm, overall weight: 1,300 kg, Flexible edgebander OLIMPIC K360 HP TER1 (SCM Group) in rich configuration suitable for custom made production. Machine is equipped with MULTIRADIUS aggregates (ABS 1mm, ABS 2mm + thin edges + solid wood). Main technical parameters: - feeding speed: 11 m/min Cgoln H Uhsu Skmkonst - panel thickness: 8-60 mm (max. 45 mm with rounding) - max. solid wood stripe: 8 mm - edge counter: only 99 km ! - weight: 1.300 kg Equipment and configuration of the machine: - control panel STARTOUCH (color LCD screen 30 cm) - internal lightning of working area - electronic top pressure adjustment - electronic adjustment of the entry guide for variable stock removal (EasySize) Working units: - antiadhesiv spray - pre-milling unit (2x DIA cutter diam. 100 mm, each motor 1,5kW) - glue pot with roller "VC-VM" (glue pot with quick-release system, EVA/PUR glue) - 2 pieces !!! - pressure rollers (3 pcs) with timed intervention - 2 motor end cutting unit "K-2" with 2 pairs of sawbladed (straight and radius) - radius trimming unit "R-HP" R1 mm, R2 mm + thin edges + solid wood 8 mm (each motor has: 2 electronic axis with bruhsless motor) - 1 motor rounding unit "ROUND 1" MULTIDEDGE R2mm + thin edges (1x electronic axis with brushless motor), diamond tool - radius edge scrapers "RAS-HP" R1 mm, R2 mm (each motor has: 2 electronic axis with bruhsless motor) - cleaning spray - glue scrapers "RC-V" - brushes"SP-V"

Condition: used, machine/vehicle number: 007186, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Cgoln Hju T Tuwj Uhnot Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: ready for operation (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 21113/P/3, No reserve price - guaranteed sale at the highest bid! Edge bander with roller conveyor TECHNICAL DETAILS Working height: 870 mm Minimum working width (double-sided): 270 mm Minimum working width (single-sided): 70 mm Maximum working width (double-sided): 2,000 – 2,500 – 3,000 – 3,000 – 3,500 mm Maximum workpiece thickness: 60 mm Workpiece projection: 40 mm Edge dimensions: Max. thickness 30 mm, max. width 65 mm Infinitely variable feed rate: 8 – 30 m/min Air connection per side: 1/2" internal thread, 1" supply line per side Height from machine stand to workpiece support: 210 mm Sanding units Bevel belt sanding unit LOW.PN: reinforced, for workpiece treatment from below Radius sanding pad with air nozzles: Radius 3.0 Bevel belt sanding unit OB.PN: reinforced, for top workpiece treatment Radius sanding pad with air nozzles: radius 3.0 Top and bottom chamfering unit with oscillation: included Operation Operating tool: KL/R30 Sliding chain: KL/R70 Braking and measuring devices Electronic braking: 0.2 – 3.74 kW WFL measuring head: R3, G1/4"×15 Cgoln H Uswa Sdnjhnot Tool change and milling device Change device for profile milling: radius / chamfer Finishing and scraping units Finishing device: pneumatic, manual Joinery scraper: R=3.0, indexable insert tool Belt grinding Belt grinding unit: KS10 Belt grinding unit adjustment device: pneumatic Cleaning and finishing Brush: length = 140 mm Finishing device on the left: pneumatic, for glue joints, manual operated Edge processing Rounding scraper: radius = 1.5, indexable insert tool Bargstedt rolling mill Workpiece length: 300 to 2,500 mm Workpiece width: 120 to 800 mm Thickness: 8 to 40 mm Workpiece type: flat material Working height: approx. 900 mm Feed rate: 7 – 42 m/min Orientation Fixed edge left: for TFU02/L/... Fixed edge right: for TFU02/R/... Air consumption: 0.5 l/min at 6 bar Electrical connection: 380 V – 3 Ph – 50 Hz (standard) Total weight: approx. 800 kg net MACHINE DETAILS Total length: 10,410 mm Total width: 1,950 mm Total height: 2020 mm Machine base length: 9,625 mm Weight: 6,450 kg Standard voltage: 380 V Heating and control voltage: 220 V Frequency converter: 300 Hz EQUIPMENT - Klöckner Moeller system - Top and bottom chamfer belt sanding units - Radius sanding shoes with air nozzles - Workpiece support - Transport device - Universal transformer - Braking device - Sliding chain - Electronic braking - Profile milling tool with changeover device - Noise protection cover - Extraction unit - Safety limit switch - Pneumatic finishing unit - Indexable blade scraper - KS10 belt sanding unit - Pneumatic adjustment for belt sander

Condition: used, Year of construction: 1996, Used machine Year of construction: 1996 Equipment and technical data: Spreading unit consisting of: -roll and fixed length magazine -roll separator -glue applicator -pressure zone Heating system: Glue basin Cross-cut unit Jointing unit Universal trimming unit Scraper unit Buffing unit Buffing unit Workpiece thickness: 10-55 mm Workpiece length: min. 160 mm Workpiece width: min. 65 mm Cgolevymddon H Uhnot Edge thickness: 0.4 - 12 mm Roller cutting: 3 x 45 mm Feed rate: 13 m /min. Pneumatics: 7 bar Availability: Short term Storage location : Flörsheim

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 600 KG Additional Equipment Glue Pot Capacity: Max glue pot capacity 1 Kg (with optional 2 Kg glue pot) Gluing Unit:Edge gluing on open and closed curved panels of small and large dimensions/1 gluing roller/2 rollers to copy the shape of the panel/2 800 W resistors with electronic temperature control/Manual adjustment of the glue quantity/Glue temperature adjustment/Automatic edge cutting system PLC System: For setting the measurement and cutting of the edge with encoder reading Csln Hsv H E S To Uhnegt Laser: Facilitates cutting programming for closed pieces without the need to measure the piece Piece Feeder: On/Off automatic piece feeder Work Surface: For edging and trimming small pieces Edge Magazine: Rolled edge magazine with idle roller system Trimming Group: 2 high frequency 0.5 kW motors with rotation speed of 15000 rpm /On/Off trimming unit/Pneumatic lifting of the two motors/2 brazed cutters R=3 Z=6/ Articulated Arm: Complete with workpiece depression table for edging and trimming large pieces This VITAP Eclipse edgebander was manufactured in 2018. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this VITAP Eclipse edgebander. Contact us for more information. Application Types Edge Banding

Condition: used, Year of construction: 2018, total length: 1,000 mm, total height: 150 mm, total width: 5,350 mm, Price: On request - Year: 2018 - Documentation available: No - Serial number: 18395 - Transport dimensions: 1000mm x 5350mm x 155mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Cgjlnsv U Rnie H Uhnet Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2001, No. 3210 Edge banding machine Ott Pacific V 6 - F Used, year of construction 2001 Hot-melt adhesive hot-cold process Application roller with synchronized and counter-rotation Adjustable infeed ruler 0 - 12 mm Milling 0.2 - 6 mm Workpiece thickness 8 - 42 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Compressed air required 6 bar Feed speed 12 m/min Aggregates: Joining (pre-milling) 2 x 1.5 kW Fine milling machine, flush chamfer 0° / 15° / 30° / 45° (2 carbide insert cutterheads) Fine router, radius R2 - R5 (2 carbide insert cutterheads) Scraper, automatic feed (2 carbide blades) Corner rounding AR-2 (2 carbide insert cutterheads) Edge cleaning (2 oscillating brushes) Transport dimensions approx. 5300 x 1300 x 1250 mm LWH Weight approx. 2200 kg Sale on behalf of customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Dismantling, loading and transportation by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Celn H Uhov Naxtenogt Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2021, operating hours: 179 h, Functionality: fully functional, total width: 900 mm, edge thickness (max.): 5 mm, overall weight: 1,600 kg, height adjustment type: electric, working height: 60 mm, power: 15 kW (20.39 HP), input current: 28 A, Pure glue and hot melt adhesive with removable tank, 15 kW power. Service was performed by Felder. Edge thickness from 0.5 - 5 mm Cgeln H Uswbuvpshnjt

Condition: ready for operation (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 280/1-501 15506069, No reserve price - guaranteed sale at the highest bid! Standard equipment according to manufacturer - no guarantee TECHNICAL DETAILS Min. workpiece length: 160 mm Min. workpiece width: 65 mm Workpiece thickness: 8 – 60 mm Edge width: 0.4 – 6 mm Feed speed: 10 m/min Feed system: Single conveyor for wound edge bands or strips Pre-milling unit Milling feed: 45 mm Glue application Cgsln Hewa R Rte Uhnst Glue system: Glu Jet S Glue type: EVA and PUR adhesive (single-cartridge system with glue stick) Pressure system Number of pressure rollers: 3 Cutting Cutting motors: Two-motor system 60 mm Function: Pneumatic swivel system Cutting cut Cutting unit: Multifunctional unit Corner rounding Corner rounding: 60 mm Scraper Scraper: Mechanical incl. Chip extraction system Surface scraper Surface scraper: mechanical, with chip collector Glue joint detection unit Glue joint detection unit: application-controlled Polishing unit Polishing unit: polishing unit included MACHINE DETAILS Overall length: 4,930 mm Width × Height: 1,600 × 1,774 mm Weight: 1,440 kg

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: very well maintained/refurbished in a workshop With manual pressure bridge adjustment With central lubrication of the chain guide rail manually via grease nipple - Edge thickness for rolls 0.4 - 3 mm (depending on material) - Edge thickness for strips 0.4 - 8 mm (depending on material) Edge cross-section max. 6 x 42 mm Edge height max. 65 mm Workpiece thickness 6 - 60 mm Workpiece width min. 160 mm (without corner rounding 1832) Feed speed 10 m/min. - Edge thickness max. 6 mm - PLC control (program-controlled) - Glue height max. 60 mm - Pre-milling unit 1801 in up- and down-feed (with diamond tools) Automatic edge feed 1903 Transport of rolls and strips Cgjln H Uevymgrehnot Maximum load capacity 40 mm Rolls; Max. edge thickness 3 mm (depending on material) - Adhesive application station cartridge 1906 M Automatic glue height adjustment (tactile nozzle) Processing of EVA and PUR adhesives Adhesive in cartridges or granules Processing of neutral or colored adhesives Adhesive application using nozzle technology Heat-up time 3 min. Incl. automatic reloading Incl. manual flushing function via separate flushing channel Magazine capacity: 1 cartridge including pressure regulator for regulating the cartridge contact pressure Automatic adhesive temperature reduction over time - 1912-3 pneumatic pressure unit First roller driven with pneumatic plunge control 2 conical pressure rollers - 1918 trimming unit (60 mm) pneumatically pivotable to 10° - 1827 MOT4 multi-function milling unit for milling the upper and lower longitudinal edges with motorized positioning of the horizontal guides Tracer shoes with motorized axial positioning of the milling motors including pneumatic adjustment (separate top and bottom) for flush radius milling including blow nozzles Flush milling 3 mm radius Bevel tilt 0-15°, manually (for max. edge thickness 6 mm) Pneumatic tilting device for milling unit 1827 MOT 4 Pneumatic tilting to a 15° bevel from the control unit - Vertical tracing pneumatically adjustable by 0.1 mm for milling with edge overhang, e.g., for plastic edges - Corner rounding unit 1832 Corner rounding function for up to 3 mm edge thickness Tool thickness 12-60 mm including automatic lifting device (max. Feed speed 10 m/min.) - Radius scraper with motorized adjustment (MOT 2) incl. pneumatic adjustment (separate top and bottom) Chip catcher - Flat scraper 1964 for removing adhesive residue for a clean bond joint top and bottom application-controlled with extendable workpiece support Availability: Short-term Location: Bavaria

Condition: ready for operation (used), Year of construction: 2003, This HOMAG WEEKE PROFI KFL20/29/QA/25 edgebander was manufactured in 2003. Consider the opportunity to buy this HOMAG WEEKE PROFI KFL20/29/QA/25 edgebander. Contact us for further details. Colsv Nb A Tsn H Uhnjgt Application Types Edge Banding

Condition: used, Year of construction: 2007, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Csln H Uhsv U Nrasnsgt - Year: 2007 - Documentation available: No - CE mark available: Yes - Serial number: Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 5 h, Functionality: fully functional, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, power of the milling unit: 750 W, type of input current: three-phase, tank capacity: 1 l, Automatic edge banding machine with chain feed and pre-milling unit Sample machine built in 2022 Equipment: Touch ME "7" screen control Glue container quick-change kit Multifunctional trimming unit Radius scraper unit Cgslnswa Ag Ts H Uhnet Surface scraper unit LED interior lighting

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Condition: Well maintained (serviced annually) Operating hours: Approx. 7000 Equipment: Basic machine Accura 1558 Performance with belt bridge Incl. air cushion table with long infeed ruler Incl. guide system BS703 Incl. edge feed 1901 fully automatic Incl. joint milling unit FG 701 MOT 2 HSK 32 R Incl. Glujet 301 automatic adhesive application system Incl. printing unit DW701 MOT Coljvymfzon H Uhnogt Incl. trimming unit KA702 pneumatic Incl. multifunctional package: Milling unit FR 701 Multi Corner copying unit FF701 MULTI Radius scraper ZK701 MULTI Incl. flush milling unit 1828 MOT 2 to 20 mm Incl. surface scraper FK 701 aggregate NT 701 Incl. buffing unit Incl. spray device at the inlet and outlet New price in this configuration over 200T€ Location: Czech Republic Availability: Short term

Condition: ready for operation (used), Year of construction: 2008, Additional Equipment This ege bander line consists of an automatic infeed TBH500/D/25/12, a double edgebander KFL525/6/A3/15, a turning station TD31/35/12, a double edgebander KFL526/8/A3/35, a corner transport TFW530/R/RL/30/12/Q and a vacuum outfeed stacker TSP410/D/25/12. Pre-milling Unit: 0.55 kW motors at 12000 RPM. Multi-profile Post-processing Unit: Automated with presets for max. 3 profiles. Automated Pressure Zone Adjustment: For varying edge thicknesses. Air Spray Device: For edge lubrication top and bottom. This HOMAG Edgebanding line was manufactured in 2008. It is designed for efficient edge banding applications, ensuring consistent performance. Ideal for woodworking professionals seeking reliable machinery. Contact us for more information. Cgeln Hov Ht Hxj Uhnjt Application Types Edge Banding

Condition: used, Year of construction: 1997, Second hand machine Year of manufacture: 1997 Condition: well maintained Equipment and technical data: Machine with PLC control Feed rate 12/16 m/min Cgslnemxp I He H Uhnot Edge feed for roll and strip material, automatic 1901 Adhesive application cartridge 1906 with sensing nozzle Printing unit pneumatic, motorized adjustment to edge thickness 1926 cross-cutting unit 2-motor, pneumatic swiveling 1918 Trimming unit rigid up to 30 mm 1962 Milling unit MOT 5 with multifunction flush, radius, chamfer 1966 Radius scraper 1927 corner copying 1983 Surface scraper 1964 Buffing unit 1944 Blowing nozzles Technical data: Workpiece thickness min./max.: 6/60 mm workpiece width min. 60 mm workpiece length min. 140 mm glueing thickness max. 13 mm weight: 1350 kg Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: short term

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Edge feed for rolls and strips Joining milling unit with 2 milling heads Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Cgolnjvymdqs H Uhnjt Radius milling unit Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Edging length strip min.: 350 mm Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Machine dimensions L x W x H 6480 x 1250 x 1690 mm Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: very well maintained/workshop overhauled With manual pressure bridge adjustment With central lubrication of the chain guide rail manually via grease nipple - Edge thickness for rolls 0.4 - 3 mm (depending on material) - Edge thickness for strips 0.4 - 8 mm (depending on material) Edge cross-section max. 6 x 42 mm Edge height max. 65 mm Workpiece thickness 6 - 60 mm Workpiece width min. 160 mm (without corner rounding 1832) Feed speed 10 m/min. - Edge thickness max. 6 mm - PLC control (program-controlled) - Glue height max. 60 mm - Pre-milling unit 1801 in up- and down-feed (with diamond tools) Automatic edge feed 1903 Transport of rolls and strips Maximum load capacity 40 mm Rolls; Max. edge thickness 3 mm (depending on material) - Adhesive application station cartridge 1906 M Automatic glue height adjustment (tactile nozzle) Csln Hev Ntc So Uhnjgt Processing of EVA and PUR adhesives Adhesive in cartridges or granules Processing of neutral or colored adhesives Adhesive application using nozzle technology Heat-up time 3 min. Incl. automatic reloading Incl. manual flushing function via separate flushing channel Magazine capacity: 1 cartridge including pressure regulator for regulating the cartridge contact pressure Automatic adhesive temperature reduction over time - 1912-3 pneumatic printing unit First roller driven with pneumatic plunge control 2 conical pressure rollers - 1918 trimming unit (60 mm) pneumatically pivotable to 10° - 1827 MOT4 multi-function milling unit for milling the upper and lower longitudinal edges with motorized positioning of the horizontal guides Tracer shoes with motorized axial positioning of the milling motors including pneumatic adjustment (separate top and bottom) for flush radius milling including blow nozzles Flush milling 3 mm radius Chamfer tilting 0-15°, manually (for max. edge thickness 6 mm) Pneumatic tilting device for milling unit 1827 MOT 4 Pneumatic tilting to a 15° chamfer from the control unit - Vertical tracing pneumatically adjustable by 0.1 mm for milling with edge overhang, e.g., for plastic edges - Corner rounding unit 1832 Corner rounding function up to 3 mm edge thickness Tool thickness 12-60 mm including automatic lifting device (max. Feed speed 10 m/min.) - Radius scraper with motorized adjustment (MOT 2) incl. pneumatic adjustment (separate top and bottom) Chip catcher - Flat scraper 1964 for removing adhesive residue for a clean bond joint top and bottom application-controlled with spray device 1856 at the inlet (release agent) and outlet (cleaning agent) with extendable workpiece support Total length 4630 mm Availability: Short term Location: Bavaria

Condition: new, Year of construction: 2023, Exhibition machine Year of manufacture: 2023 Minimum workpiece width approx. 75 mm Workpiece thickness 8 - 50 mm Cjlnjv Nta Ro H Uhnegt Minimum workpiece length approx. 120 mm/180 mm for corner rounding Edge thickness 0.4 - 2 mm Stepless chip removal of the joining unit 0 - 2.0 mm Joining unit with two counter-rotating, insert-controlled joining units Diamond tools height = 55 mm Direct glue application to the workpiece, glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Pressure unit Cut-off unit with HF motor, 2 saw blades, and high-precision linear guides Combination milling station for radius and chamfer milling Radius scraper unit with blow-off device and extraction system Corner rounding unit Surface scraper unit Suction pipe system with 90° bend and manual valve mounted on the machine Availability: Short-term Storage location: Hüllhorst

Condition: new, Year of construction: 2023, MACHINESEEEKER ENQUIRIES: Celn H Uhjvxxtzjnsgt Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. ----- New machine Year of manufacture 2023 Equipment and technical specifications: ARTEA 1030 BASE MACHINE Extendable workpiece support, 500 mm spacing Additional rigid workpiece extension, length 3080 mm Edge Control BC 15 with 15.6" touchscreen (Visual Setting mode) LED machine lighting for the processing units FG101 jointing unit with 2 diamond milling heads MG101 edge feeder Glu Jet GJ101 adhesive application system (2.3 kW, 50 Hz) Storage compartment for 1.4 kg cartridges (4 cartridges) GLU JET collection container Automatic reloading function KA101 trimming unit (50 mm) DW101 pressure unit Trimming, single-motor, linear guide FR101 multifunction trimming unit Flush 5 mm, R 2 mm Corner copying unit FF101, single-motor, linearly guided, 45 mm Scraper unit ZK101 Chip collection box Surface scraper FK101 Buffing unit SW101 Spraying device TR101 for the inlet and outlet areas Horizontal spraying device GM101 after the printing unit Availability: Short term Location: Hochheim