Condition: good (used), Year of construction: 2011, machine/vehicle number: 0-200-23-3741, The machine has been in use so far and has produced good results. Fgjb Houmngvea H Tqsb

Condition: used, Year of construction: 1989, Used machine Year of construction: 1989 Condition: Functionally tested Equipment and technical data: Glue thickness max mm 20 Gluing height max mm 51 Roll material thickness max mm 3 Workpiece length min mm 140 Workpiece width min mm 60 Glue system 1906 cartridge Printing unit Trimming unit 1920 Flush trimming up to 20 mm Chamfer trimming Fgeb Ha H Toquyayoqeb Space requirement LxWxH mm 3150x1800x1375 Weight approx. kg 800 Location: Hochheim Availability: Short term

Condition: new, Year of construction: 2025, The Hebrock F 5 Fobolht Hwo Ha H Tqogb If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Condition: new, Year of construction: 2024, MACHINE SEEKERS ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. ----- New machine Year of manufacture 2024 Equipment and technical data: Basic machine 1057 XL C with Beckhoff touch screen control Extendable workpiece support 600 mm Extension of extendable boom Infeed ruler standard 3 LED lights in the infeed Joining milling unit 2-motor DIA joining milling cutter 70 x 64x 30 mm Z2+2 Link. and clockwise rotation Edge feeder 1903 fully automatic Glujet 301 adhesive application system Automatic reloading function Storage slot for 1.4 kg cartridges (4 cartridges) GluJet collection container Printing unit 1912-3 pneumatic Spray device GM 201 after printing unit Capping unit 1918 pneumatic Extraction hoods for Capping unit Combination milling unit FR201 with DIA milling cutters R=2 mm Form milling unit 1832 Shelf program Radius scraper ZK 301 Chip catcher box Surface scraper FK 701 Fgob Ha Horucb So Tqsb Spray device front and rear TR201 Buffing unit 1940 Availability: short term Location: Hochheim

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Fgsbjlht Hzs Ha H Tqsb Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: new, Year of construction: 2022, New machine Year of construction: 2022 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application to straight workpieces (EVA-PUR glue tray with discharge function optional), HF cross-cut saw station, HF trimming unit, corner copying unit, chain feed, double roller top pressure, pull-out workpiece support rail, signal lamp for workpiece sequence and integrated line control for contactless control of processing functions. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths of 0.4 3.0 / 6.0 mm and workpiece heights of 8 60 mm. Feed speed: 10.0 m / min.; 8.0 m / min. with corner copying 3 free spaces for finishing units 10 color touch screens Machine length 4030 mm Workpiece thickness 8 - 60 mm Workpiece width min. approx. 75 mm Workpiece length min. approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness 0.4-3.0 mm Chip removal joining unit 0 -2.0 mm stepless Total connection 7.5 kW - 400 V Feed speed 10 m/min; 8 m/min. Pneumatic connection 6 bar Net weight 1050 kg Options: Surcharge for radius scraper unit with blow-off device + suction unit Surcharge for flat scraper unit + suction unit Surcharge for buffing unit Fgeb Ha Heqfad As Tqjb EVA/PUR glue pot with discharge function Surcharge for diamond tools Height=65mm for joining unit Riepe spraying device (anti-stick) on the joining unit Riepe spraying device (cleaning spray in front of buffing unit) Pipe system with 90° bend + manual slide mounted on machine with D=200mm Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2025, The Hebrock F 2 Fgob Haji Am U Ds H Tqsb The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: used, Year of construction: 1997, Used machine Year of construction 1997 Equipment and technical data: max. edge thickness 3 mm max. workpiece height approx. 50 mm min. Workpiece length approx. 300 mm min. Workpiece width 70 mm Feed speed approx. 10 m/min Ready for operation approx. 6 min. Fgob Hor H Rlgoa H Tqeb Power consumption 7 kW Rapid heating adhesive container High-frequency cross-cut saw High-frequency flush trimmer (with combined interchangeable plate cutter for radius, straight and chamfer trimming) Extraction nozzle 100 mm Dimensions: 330x140x130 cm Weight 550 kg Availability: short term Location: Flörsheim

Condition: new, Year of construction: 2025, Hebrock F 4 For complete processing of your panels For all those who don't want to do things by halves. With the F 4, we offer you a model with which you can produce fully processed edges on a machine length of just 4 m. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min. Ready for operation approx. 3.5 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Fgeb Ha Hehqadco Tqsb Weight approx. 820 kg Suction nozzle Ø 1 x 140 mm PLC control 10″ touchscreen Top-mounted rapid-heat adhesive container (maintenance-free) Support plate for edging material Automatic central lubrication (cross-cut saw, corner router) Visual display for workpiece sequence Extension arm (can be pulled out to the front) Interchangeable basin pre-equipment incl. adhesive changing device for PUR processing Surface scraper with dual tracing Pneumatic roller capping (scissor cut design, Hebrock system) Double roller top pressure (ball bearing) Transport chain with bolted special chain plates Jointing cutter Milling unit cross-cut saw Corner cutter Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Condition: Factory overhauled by Lange Maschinenbau Minimum workpiece width approx. 75 mm Minimum workpiece thickness 8 - 50 mm Minimum workpiece length approx. 120 mm/180 mm for corner rounding Edge thickness 0.4 - 2 mm Stepless chip removal of the joining unit 0 - 2.0 mm Joining unit with two counter-rotating, insert-controlled joining units Diamond tool height = 55 mm Fgebelfikie Ha H Tqjb Direct glue application to the workpiece, glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Pressure unit Cross-cutting unit with HF motor, 2 saw blades, and high-precision linear guides Combination milling station for radius and chamfer milling Corner rounding unit Surface scraper unit Suction pipe system with 90° bend and manual slide valve mounted on the machine Machine length: 3273 mm Availability: Short term Location: Hochheim

Condition: excellent (used), Year of construction: 1999, Running direction of the panel : from operator to left max. glue thickness : 5 mm min. Workpiece thickness : 10 mm min. Workpiece width : 90 mm feed speed : 10 m/min Heating time : 5 min Automatic roll magazine : Yes cross-cut shears up to : 0.2 - 3.0 mm autom. gluing : glue pot with granulate on top Fjberutcye Ha H Tqogb cross-cut saw : rigid 90 Combination trimming unit : Yes unit display : display type of control : manual Operation : Selector switch/push buttons Protective hood : Yes Chassis : yes Dimensions : 2800 x 1400 x 1400 mm Weight approx. : 550 kg Location : Comes to stock 54634 Bitburg - immediately available - subject to prior sale

Condition: used, Year of construction: 2015, Used machine Year of construction: 2015 Condition: Factory overhauled technical data: Workpiece thickness 8 - 50 mm Workpiece width min. approx. 75 mm Edge thickness 0.4 - 3.0 mm Single feed solid edge up to 5 mm Chip removal Joining unit 0 - 2 mm stepless Electrical connection 400 V, 50 Hz Total connection 7.5 kW Fgsb Hokwhbbsa H Tqsb Feed speed 5.5 - 8 m/min. Pneumatic connection 6 bar Net weight 850 kg Equipment: Joint milling unit with 2 motors and 45 mm high milling heads instead of 30 mm PUR/EVA outlet basin printing unit cross-cut saw Combination trimming unit Corner copying unit Radius scraper Surface scraper Location: Hochheim Availability: Short term

Condition: new, Year of construction: 2025, The Hebrock K 36 Top equipment with motorized adjustment - Exhibition piece - New machine - - immediately available - This Hebrock endurance racer offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily use. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock is setting new standards in the field of perfect edge processing of various edge thicknesses. max. edge thickness: 3 mm max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 60 mm Min. workpiece length approx. 140 mm Feed speed approx. 15 m/min. Ready for operation approx. 6 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 5250 x 1230 x 1430 mm (LxWxH) Weight 1750 kg Equipment: Hebrock K 36 - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touch screen), hot melt adhesive application to the workpiece workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 3 mm routing depth, maintenance-free, coated glue tray with HF double-motor cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with pneumatic trimming adjustment and interchangeable panel trimmer (combi version), corner rounding trimmer, radius scraper, surface scraper (incl. cleaning station, robust chain drive, ball-bearing mounted double roller top pressure, unit viewing window from the rear of the machine and operator side, signal lamp for workpiece sequence, extendable workpiece support, feed approx. 15 m. support, feed rate approx. 15 m/min, gluing up to 60 mm workpiece thickness 36/08/1 Quick-change equipment for corner router 36/08/2/1 additional exchangeable motor corner router R=1 36/09/1 Multi-radius scraper 36/24/1 Release agent spraying device 36/24/2 Cleaning agent spraying device Fgjb Hsi Am Ukea H Tqjb 36/25 Protective spraying edge 36/27 Nesting (1x milling station + 1 x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/bevel) 36/45 Axis package Motorized adjustment of panel, edge thickness and joint milling depth jointing depth adjustment Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2010, Used machine Year of construction 2010 Technical data: - Voltage: 230 V 50/60 Hz, 120 V 60 Hz - Power: 765 W - Max. Edge height: 45 mm - Edge thickness: 0.4-3 mm Fob Ha Heunczws Tqegb - Digital stepless temperature setting: 120-200 °C - Feed speed: 0.5-4.0 m/min - Glue basin capacity: 150 cm³ - Warm-up time: 10 min - Weight: approx. 4 kg - Including table frame - with accessories Availability: short term Location: Hochheim

Condition: new, Year of construction: 2023, New machine Year of construction: 2023 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application to straight workpieces (EVA-PUR glue tray with discharge function optional), HF cross-cut saw station, HF trimming unit, corner copying unit, chain feed, double roller top pressure, pull-out workpiece support rail, signal lamp for workpiece sequence and integrated line control for contactless control of processing functions. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths of 0.4 3.0 / 6.0 mm and workpiece heights of 8 60 mm. Feed speed: 10.0 m / min.; 8.0 m / min. with corner copying 3 free spaces for finishing units 10 color touch screens Machine length 4030 mm Workpiece thickness 8 - 60 mm Workpiece width min. approx. 75 mm Workpiece length min. approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness 0.4-3.0 mm Chip removal joining unit 0 -2.0 mm stepless Total connection 7.5 kW - 400 V Feed speed 10 m/min; 8 m/min. Pneumatic connection 6 bar Net weight 1050 kg Options: Surcharge for radius scraper unit with blow-off device + suction unit Surcharge for flat scraper unit + suction unit Surcharge for buffing unit EVA/PUR glue pot with discharge function Surcharge for diamond tools Height=65mm for joining unit Riepe spraying device (anti-stick) on the joining unit Fgob Ha H Tsqfad Hoqjb Riepe spraying device (cleaning spray in front of buffing unit) Pipe system with 90° bend + manual slide mounted on machine with D=200mm Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2006, Used machine Year of construction 2006 completely overhauled with new glue application system Equipment: - Manually adjustable infeed guide - Trimming unit 1961 - Edge feeder 1903 - Glue application station 1906 with touch-sensitive nozzle - Pneumatic printing unit 1816 - Snipping unit 1822 - Trimming unit 1942 M radius, chamfer, flush - Blowing nozzle complete - Scraper unit 1929 - Chip catcher box - Surface scraper 1964 - Extraction hood set -- Complete protective hoods Technical data: Total length: 5291 mm Workpiece thickness: min. 6 / max. 50 mm Edge band thickness depending on assembly: 0.4-5 mm Max. edge band height: 55 mm Edge band length strips: min. 350 mm Edge band protrusion/height per side: max. 3 mm Workpiece width: min. 60 mm Workpiece length: min. 180 mm Feed speed: 12.5 m/min. Extraction: Joint trimming unit: 900 m³/h Milling unit: 280 m³/h Scraper unit: 280 m³/h Static negative pressure: Joint trimming unit: 1490 Pa Fgeb Ha H Tokwg Sleqeb Milling unit: 1650 Pa Min. air speed: 20 m /sec. Milling unit connection diameter: 70 mm Scraper connection diameter: 70 mm Compressed air: 6 bar Availability: approx. 2-3 weeks after receipt of order Location: Hochheim Hochheim

Condition: used, Year of construction: 2013, Used machine Year of construction: 2013 Machine number: 133 Machine has been completely overhauled new Glue Jet 301 glue system (upper part 1 mm) all units checked all cutters sharpened all knives changed - electrics for infinitely variable feed 400 V / 50 Hz, 2.2 KW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control unit with 15" touchscreen Fgsb Hsrp It Tea H Tqob - ECO MODE energy-saving mode - infeed guide 1350 mm, motorized adjustment - Joint trimming unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 trimming units for joining the panel edge. - Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit 1801 / 1802 - Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise rotation for jointing trimming unit 1801 / 1802 - Fully automatic edge feeding unit 1901 - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) -Storage chute for granulate - Printing unit 1913 MOT - Cutting unit 1918 (60 mm) pneumatic - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW) - Air Stream System milling cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise rotation - Air Stream System milling cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise rotation - Shaping cutter unit 1833 MOT4 - Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise rotation with CM technology - Scraper unit 1929 MOT2 - HW inserts for scraper holder R = 2.5 mm (2 pcs. required) - Surface scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) Availability: short term Location: Hochheim Hochheim

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 max. workpiece height approx. 40 mm min. workpiece length approx. 250 mm min. Workpiece width approx. 70 mm Feed rate approx. 11 m/min. Ready for operation approx. 4-5 min. Power consumption approx. 11 kW with heated infeed ruler with quick-heating adhesive container Pneumatic roller capping up to 3 mm with cross-cut saw up to 5 mm edge thickness Fgsberyyhco Ha H Tqjb with routing station equipped with combined insert routers on request for radius, straight and chamfer routing Extension arm, can be folded down and extended to the front with chassis with integrated extraction system L x W x H 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: at short notice Location: Hochheim Hochheim

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Condition: age-appropriate Equipment and technical data: Edging thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. extendable workpiece support Incl. chassis Incl. buffing unit Dimensions: approx. 700 x 600 x 1300 mm Weight: approx. 140 kg Fgjbekwhp Eo Ha H Tqjb Suction nozzle: 70mm Availability: short term Location: Flörsheim

Condition: used, Year of construction: 2010, Used machine Edge banding machine, right-hand version Year of manufacture 2010 Equipment and technical data: max. edge thickness 3 mm with preparation for exchange tank min./max. Workpiece thickness 8-60 mm Feed speed approx. 10 m/min Ready for operation approx. 5 min. Min. workpiece length 190 mm Min. workpiece width 80 mm Joining milling unit with 2 milling heads with PLC control (incl. touchscreen) Fgjb Haouhirbj H Tqeb Glue pot with contact roller Pressure zone Cutting shears Cutting saw Combination milling unit flush/bevel/radius pneumatically adjustable Corner copying unit Surface scraper, short version Dimensions approx. 4700 x 1200 x 1530 mm Weight approx. 1150 kg Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Compact and flexible in the smallest of spaces. Workpieces get their finish on a length of only 2.13 m. Equipped with a 1.1 KW high-frequency motor joining unit and diamond-tipped spiral jointing cutter, Teflon-coated gluing unit, pre-capping unit and HF multifunctional trimming unit 2 free spaces for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5 color touch screen. Technical data Machine length 2122 mm Workpiece thickness 10- 45 mm Workpiece width min approx. 120 mm Edge thickness 0.4 - 2.0 mm Max. edge height = workpiece height + 4 mm (2+2) Electrical connection 230 V Total connection 3.6 kW Fgjb Ha Hou Swade Tqob Feed speed 6.5 m/min. Pneumatic connection 6 bar Net weight approx. 490 kg Options: Surface scraper unit Diamanmat tools height = 45 mm Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2011, Used machine Year of construction : 2011 Condition : Function tested with new PPC-panel Glue thickness max mm : 6 Gluing height max mm : 60 Roll material thickness max mm : 3 Workpiece length min mm : 160 Workpiece width min mm : 65 Feed rate max m/min : 10 Glue system cartridge : Yes Glue system granulate : Yes Suitable for PUR glue : Yes Joint trimming unit : Yes Cross-cut saw unit : 2 motors Flush/radius/bevel stations : 1 Corner copying unit : 1 motor Scraper unit : Profile and flat Strip magazine : Yes Cycled units : NC axis(es) Design : Left-hand machine 1903 : Yes 1827 MOT4 : Yes 1832 : Yes 1929 MOT2 : Yes Control and software - HOLZ-HER EDGECONTROL CE mark : Yes Declaration of conformity : Yes Total connection kW : 7,60 Fgeb Ha H Tou D Ttqeqeb L x W x H 4630 x 1411 x 1698 mm Weight approx. kg : 1,235 Location: Hochheim Availability : short term

Condition: used, Year of construction: 2014, Used machine Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Fgob Ha H Tstq Nlrsqsb Control unit with 10.4" touch color screen Extendable workpiece support motorized - position-controlled pressure beam chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Surface scraper 2 motorized polishing unit (buffing wheel) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived in 2025) MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Technical specifications: Edge thickness for rolls: 0.4 - 3 mm (depending on material) Edge thickness for strips: 0.4 - 8 mm (depending on material) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Restrictions may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: Motorized pressure bridge adjustment Extendable workpiece support XL, 600 mm spacing Fgeb Hsvzc Rioa H Tqob 3-color LED light in the infeed Motorized adjustment of the infeed guide Long infeed guide 1252 mm I-Tronic package Edge Control PPC 322 W IntelliSet: intelligent Tool correction f.a.s.t = fast setting technology ECO mode Energy saving mode Prepared for RETURN connection (third-party manufacturer) BS 501 guide system; right-angled workpiece feeding for front edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm FG201 jointing unit with 2 64 mm high milling heads MG 301 edge feeder GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° pivoting for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reactant (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power supply and automatically compensates for any vacuum loss. - PUR fully under control! DW 301 printing unit with motorized NC axis; 1st roller driven by pneumatic plunge control, 2 conical pressure rollers GM301 spray unit after printing unit with lubricant for high-gloss edges KA 501 pneumatic trimming unit (60 mm) Extraction hoods for trimming unit FR301 MOT6 multifunctional trimming unit Shelf program FF 301 MOT1 profile trimming unit ZK301 MOT4 scraper unit including high-gloss package FK702 surface scraper Complete spray unit for separating and cleaning agent GM 301 spray unit after printing unit (high-gloss edges) SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: Short-term Storage location: Hochheim

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Control with LCD display, pivoting control panel, program memory, manual pressure bridge adjustment, feed by means of transport chain, extendable workpiece support, joining milling unit 1961 2 x 2.0 kW diamond joining milling cutters in parallel and counter-rotating motion, edge magazine 1903 support plate 820 mm, max. loading capacity 40 mm automatic feeding of rolls and strips glue application system 1906 cartridge system with tactile nozzle, with automatic reloading use of PUR adhesives possible, printing unit 1816 with driven roller, pneumatic control of the printing unit cutting unit 1918 2 x 0.22 kW pivoting from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2 for flush / radius and chamfer milling motor-adjustable Blow nozzle on the milling unit, Corner copying unit 1832 Corner copying up to 3 mm radius, postforming up to r = 6 mm Radius scraper unit 1929 Plastic edges up to 3 mm Chip catcher box for radius scraper, insert-controlled surface scraper 1964 Blow nozzle on the surface scraper Buffing unit 1940 Fjb Ha Hov Aqybs Tqsgb Spray device for separating and cleaning agent application complete ----- Technical data ----- Edge thickness of rolled goods: 3 mm, Edge thickness of strip goods: 5 mm Max. edge thickness for corner copying: 3 mm, Workpiece thickness: 6/45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8 m/min, Distance between workpiece support: 470 mm, Support plate Ø for edge material: 800 mm, Cutting knife for rolled goods up to: 3 mm, Heating time: 3.5 min, Power of jointing cutter: 2 x 2 kW, Power of crosscut saw: 2 x 0.22 kW, Power of milling station: 2 x 0.6 kW, Power of corner copying: 0.22 kW, Extraction nozzle of jointing milling unit: 120 mm, Extraction nozzle of milling unit: 70 mm, Extraction nozzle of scraper unit: 70 mm, Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm, Weight: 1,200 kg Availability: short term Location: Flörsheim