Year of construction: 2011, condition: used, Suitable for automatically brushing (rounding edges or deburring) the teeth on HM circular saw blades. Dcodpeu Dk Edofx Ah Ujp Accessories: Sawblade holder, Stepless variable speed control of the sawblade drive, Pre-selectable timer. Circular saw blade diameter: 1600 mm Power of geared motor: 0,1 kW Brush motor performance: 0,75 kW Connected load approx.: 400 V / 50 Hz Weight approx: 310 kg Dimensions W x D x H approx.: 2400 x 850 x 1550 mm colour: blue/grey

Condition: used, Dear colleagues, We are urgently looking for an operating manual for a SCHNEIDER Jo1 hydraulic surface grinding machine. Dcjdpjxvarcefx Ah Usp Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1953, grinding wheel dia. x width ca. 200 x 25 mm magnetic clamping plate ca. 450 x 170 mm cross feed of the table 200 mm revolutions of grinding spindle 3000 U/min grinding wheel hole diameter 51 mm weight ca. 1300 kg 0,001 - 0,013 mm grinding length 600 mm Surface grinding machine Dodpfxexu Nw Eo Ah Uecp Includes extractor 1 additional grinding wheel holder Machine was in occasional use until recently

Condition: used, x-travel 400 mm y-travel 250 mm tool taper ISO 40 turning speeds 40 - 3.150 U/min Dcsdpfx Ajxu Nxpsh Uep table dimensions 630 x 300 mm table load 150 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2006, rotary table diameter 1200 mm Control Siemens 840 D internal grinding diameter 1450 mm swing diameter 1500 mm workpiece weight 3000 kg z-travel 1200 mm feeds z-axis 0,01-10.000 mm/min x-travel 1900 mm feeds x-axis 0,01-15.000 mm/min b-axis 280 ° weight of the machine ca. 25 t dimensions of the machine ca. 8,6x5,5x5,5 m Spindle 1 Diameter 230 mm -Speed ??2,000–12,000 rpm -Grinding height 820 mm -Power 25 kW -Tool holder HSK-C80 Spindle 2 Diameter 140 mm -Speed ??1,500–4,500 rpm -Grinding height 700 mm -Power 15 kW -Tool holder V 56 Spindle 3 Diameter 140 mm -Speed ??1,500–4,500 rpm -Grinding height 700 mm -Power 15 kW -Tool holder V 56 Spindle 4 Diameter 140 mm -Speed ??1,500–4,500 rpm -Grinding height 1,100 mm -Power 15 kW Dedpfjxuv Hgsx Ah Ujcp -Tool holder V 56 Workpiece measurement

Condition: ready for operation (used), For sale here is an optical profile grinding machine by Fritz Werner, type SP. The machine is in very good condition and can be tested on site. Technical data: - Axial relief: 0 to +35 - Lateral relief: ±15 - Grinding carriage stroke, fine adjustment: 36 to 72 per min - Maximum grinding wheel diameter: 175 mm - Grinding spindle speed: 1925 to 3850 per min - Maximum workpiece height: 125 mm - Workpiece length: 250 mm - Variable speed motor for grinding spindle: 1400 to 2800 per min Dsdpfx Aswv Haveh Uecp Should you have any further questions, please feel free to contact me.

Condition: new, The HFS 3063 F Advance is a remarkable addition to the Conventional Surface Grinders category, designed for optimal performance within the Grinding Machines product group. This KNUTH machine exemplifies robust engineering with a cast-iron frame that offers superior rigidity and exceptional machining quality. It features precision guideways lubricated via a central system, ensuring reliability during operation. With an extensive standard equipment package, including a magnetic clamping plate with a built-in demagnetizing function and a Siemens PLC control system with a user-friendly touchscreen, the HFS 3063 F Advance enhances operational efficiency. Moreover, its electronically controlled hand-wheel allows for accurate spindle movement. Customers seeking a solution that bridges conventional grinding and CNC automation will find that this machine meets their needs seamlessly. Whether you're considering installation or the right accessories, speaking with our team can provide clarity on how this model can elevate your operations. Request a quote for the HFS 3063 F Advance today to benefit from advanced surface grinding technology. Dsdjwub Tuepfx Ah Uecp

Condition: good (used), Year of construction: 2005, Complete industrial paint booth, manufacturer Walther: 1 single booth + 1 double booth. Drawings with dimensions are available upon request. Dcsdpfx Asxvbdmsh Usp

Condition: excellent (used), Year of construction: 1996, Surface and Profile Grinding Machine GEIBEL&HOTZ FS 850 SA Year of manufacture: 1996 Technical data: Maximum grinding area: 800 x 500 mm Magnetic chuck dimensions: 800 x 500 mm Min / max table to spindle center distance: 180 / 625 mm Maximum table load: 1100 kg Maximum table longitudinal travel: 920 mm Maximum cross travel: 500 mm Maximum vertical travel: 445 mm Dedpfx Ahoxvb Ire Ujcp

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Dsdpfx Asxuv Udoh Uocp Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2008, rotary table diameter 1200 mm boring diameter 150 mm z-axis 1550 mm feeds z-axis 0,2-1500 m/min rapid traverse Z-axis 12 m/min x-axis 2300 mm feeds x-axis 0,2-1500 mm/min rapid traverse X-axis 12 m/min Diameter of the table 1200 mm swing diameter 1400 mm control Siemens 840D swivel range of b axis +/-180 ° total power requirement 110 kW weight of the machine ca. 40 t dimensions of the machine ca. 9x4,5x4,7 m Multi-spindle head with 4 stations - Spindle stations 1-3 - Spindle size D=140x630mm - Grinding wheel diameter 200/400mm Dedpfxjxuv Hao Ah Uscp - Adjustable grinding spindle speed 1500-4500 rpm - Drive power 15 kW - Spindle station 4 High-frequency spindle - Maximum grinding wheel diameter 230mm - Adjustable grinding spindle speed 2820/12000 rpm - Drive power 25 kW Station 5 Renishaw touch probe

Condition: ready for operation (used), The machine is in very good condition and can be tested on site. Technical Data – Grinding Machine Machining area (mm) Height x Length x Depth: 80 x 110 x 55 Motor power (kW): 0.5 Speed (min-1): 5000 Feed rate (hod/min): 150 Table load (kg): 20 Control: BOSCH Accuracy: 0.005 mm, reading via CNC, template grinding 1:10, 1:20, or 1:50, suitable for rough grinding. If you have further questions, I am at your disposal. Dcodpfx Ajwvgidjh Uop

Condition: new, The FSM 480 is a high-precision Conventional Surface Grinder from KNUTH, designed specifically for users who engage in straightforward grinding tasks at cost-effective rates. Perfect for repair and training workshops, this machine features a robust cross table construction that ensures excellent quality. Its solid, vibration-absorbing base effectively minimizes operational disturbances, while the spindle, mounted in pre-loaded angular deep-groove ball bearings, ensures low-vibration operation and high durability. The machine comes with a magnetic clamping plate and a dust suction device as standard equipment, enhancing usability. With an adjustable hand wheel scale that allows for precise vertical and transverse adjustments, you can achieve remarkable grinding parallelism of just 0.005 mm over 300 mm. For those inquiries regarding installation or accessories, you can explore further. To enhance your machining capabilities with a reliable Conventional Surface Grinder, buy now and experience the benefits of the FSM 480 from KNUTH. Dcjdouyicyepfx Ah Ujp

Condition: used, Year of construction: 1993, table-size 1500 x 550 mm grinding range 1250 x 500 mm Dcodpjxukn Eefx Ah Usp workpiece height 500 mm grinding length 1250 mm grinding width 550 mm voltage 400 V weight of the machine ca. 10 t Machine has cooling arrangement, dressing arrangement and auto. vert. feed.

Condition: used, Year of construction: 2006, grinding diameter - cylindrical max. 650 mm grinding diameter - internal max. 600 mm control Siemens Sinumerik 840 D internal grinding depth max. 600 mm External grinding length max. 600 mm workpiece length - max. 380 mm turning speed range - stepless 1-795 U/min Workpiece spindle unit (U/B1/L adjustment): -Travel (U axis) 300 mm -Swivel angle (B1 axis) -1°/+12° -Speed range (infinitely variable) 1-795 rpm -Setup speed (tapping) 10 rpm -Spindle head size A 8 according to DIN 55026 -Through bore 58.5 mm -Workpiece diameter max. 830 mm -Workpiece length max. 600 mm -Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): -Travel (Z1 axis) 800 mm -Travel (X1 axis) 150 mm -Swivel angle (B2 axis) 270° -Drive power of internal grinding spindles (infinitely variable) 7.5 kW -Grinding block mounting bore (diameter) 100 mm -Grinding block mounting length (diameter) 100 mm -Grinding diameter max. 600 mm -Grinding depth max. 860 mm -Manual longitudinal adjustment of internal grinding axis on table 530 mm Dedpfxsw Rf Tvs Ah Uocp External and surface grinding device (Z2/X2): -Travel (Z2 axis) 800 mm -Travel (X2 axis) 470 mm -Drive power of external grinding spindles 5.5 kW -Mounting bore grinding block Ø 120 mm -Grinding diameter max. 650 mm -Grinding length max. 600 mm -Grinding wheel diameter max. 500 mm Equipment/accessories: -Various grinding spindles -Various flanges/grinding wheel holders -Various clamping jaws -Coolant system -Oil mist filter -Cooler -Technical documentation

Condition: excellent (used), Year of construction: 2005, table length 160 mm table width 130 mm grinding wheel diameter 250 mm Dcodpfx Asxvdtdeh Usp total power requirement 1 kW weight of the machine ca. 1 t

Condition: used, Year of construction: 2008, rotary table diameter 1200 mm boring diameter 150 mm z-axis 1550 mm feeds z-axis 0,2-1500 m/min rapid traverse Z-axis 12 m/min x-axis 2300 mm feeds x-axis 0,2-1500 mm/min rapid traverse X-axis 12 m/min Diameter of the table 1200 mm swing diameter 1400 mm control Siemens 840D swivel range of b axis +/-180 ° total power requirement 110 kW weight of the machine ca. 40 t dimensions of the machine ca. 9x4,5x4,7 m Multi-spindle head with 4 stations Dedpexuv E Nefx Ah Uscp - Spindle stations 1-3 - Spindle size D=140x630mm - Grinding wheel diameter 200/400mm - Adjustable grinding spindle speed 1500-4500 rpm - Drive power 15 kW - Spindle station 4 High-frequency spindle - Maximum grinding wheel diameter 230mm - Adjustable grinding spindle speed 2820/12000 rpm - Drive power 25 kW Station 5 Renishaw touch probe

Condition: used, Year of construction: 1995, grinding length 400 mm grinding width 200 mm workpiece height 300 mm table adjustment - longitudinal max. 420 mm table cross movement max. 190 mm distance spindle center to table 90 - 415 mm table speeds 2 - 28 m/min table load max. 150 kg cross feed of table intermittent 3 - 20 mm Djdpfx Ahexu Ntgs Uocp rapid traverse cross 7 mm/min rapid traverse vertical 180 mm/min grinding wheel size ø 225 x 25 x ø 51 mm total power requirement 7 kW weight of the machine ca. 1,5 t dimensions of machine L x W x H 2,20 x 1,46 x 2,10 m Accessories: magnetic plate 400 x 200 mm, grinding wheel with flange, balancing scale, 1 flange separate, 2 grinding wheels separate, DRO on Y-axis, wet grinding attachment

Condition: good (used), Year of construction: 1977, functionality: fully functional, Deckel SOE tool grinder with accessories Djdpfx Aswrm Nvsh Uecp Technical data: >> Machine no. SOE 77-3997 Year built 1977 >> Motor speed 2800 rpm >> Grinding spindle speed 4500 rpm >> Motor power: 0.55 kW / 380 Volt >> Weight approx. 200 KG Accessories and equipment: >> Collets >> Grinding wheels >> Machine stand / base >> Dressing device >> Tools >> Grinding dust extraction About the machine: Offered is a Deckel SOE tool grinder with accessories. Mechanically and electrically tested. A beautiful and fully functional machine. Take the opportunity to view and try out this machine under power on site.

Condition: used, Year of construction: 1989, table-size 1800 x 900 mm grinding range 1500 x 900 mm workpiece height 690 mm grinding length 1500 mm grinding width 900 mm table speeds 4 - 36 längs m/min table speeds 1 - 60 quer m/min grinding wheel size 500 x 100 x 203 mm grinding spindle speed 1000 U/min voltage 400 V total power requirement 80 kW grinding spindle drive 28 kW weight of the machine ca. 17 t Machine was complete refurbished and modernized in 2009/23. X-axe and drive were refurbished in 2023 and the machine got new magnetic chucks. Dsdpfoxukqasx Ah Uscp Machine has cooling arrangement, dressing arrangement and auto. vert. feed. Machine has mechanical table drive and a Siemens Control.

Condition: excellent (used), Year of construction: 2004, table length 175 mm Dcedpfx Ahjxvdr To Ujp table width 110 mm grinding wheel diameter 500 mm total power requirement 1 kW weight of the machine ca. 1,5 t

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Universal tool grinding machine Michael Deckel S11 speed, year of manufacture 2002, in very good condition!! Technical Data: >> Year of manufacture: 2002 >> Serial No.: 2197 Clamping range: >> Clamping surface of tool slide 500 x 180 mm >> Max. tool diameter between centers 130 mm >> Max. tool length between centers 270 mm >> T-slots machine stand 12 mm Movement range: >> Working travel Grinding stroke 190 mm Grinding stroke during thread grinding 190 mm Transversal adjustment tool slide 100 mm Vertical adjustment grinding head 325 mm Longitudinal adjustment grinding spindle 5 mm >> Coarse adjustment travel Tool holder 220 mm Grinding head carrier 800 mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool holder 360 degrees Grinding spindle: Three-phase drive motor 1.1 KW at 2800 rpm Spindle speeds, stepless 2000 to 12000 rpm Max. grinding wheel diameter 125 mm Max. cutting wheel diameter 200 mm Dimensions: Weight 520 kg Dimensions (D x W x H) 800 x 1100 x 1760 mm Space requirement (including operation) 2.5 x 2.3 m Accessories and equipment: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11 speed. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly fast, economically, and flexibly, with the highest operating comfort. The Deckel S11speed is in very good condition. Mechanically and electrically tested. Take the opportunity to visit and test this machine on site under power. Dcjdpfx Aewrnf Ejh Uop

Condition: used, Year of construction: 1955, grinding length 1000 mm grinding width 400 mm workpiece height 400 mm total power requirement 11 kW weight of the machine ca. 5 t dimensions of the machine ca. 4 x 2,5 x 2,5 m Dcsdpfx Aexuknxsh Uep

Condition: excellent (used), Year of construction: 2011, grinding diameter 250 mm grinding length 650 mm centre height 125 mm total power requirement 13 kW weight of the machine ca. 3500 t STUDER (CH) High Precision Electrohydraulic Universal Cylindrical Grinding Machine Model S 30-1 Year 2011 19-39xx Height of centers / Grinding Ø 125 / 250 mm Center distance / Grinding length Z-axis 700 / 650 mm Workpiece weight between centers (no steady) max. 130 kg Table speeds 50 – 5000 mm/min Dodpfxoxvdrts Ah Ujcp Table way automatic, min. 1,5 mm Table reverse delay 0 – 6 s Table swivable ° Cross way X-axis 315 mm Rapid infeed way 60 mm Feeds 0,012 – 6 mm/min Spar-out time 0 – 6 s Universal Turret Wheelhead Swivable, manual B-axis 0 – 180 ° Grinding wheel dimension : bore x width x Æ 127 x 63 x 400 mm Cutting speed max. 35 m/s Internal Grinding device for spindle Ø 0 mm Workhead with hydrodynamic bearing Fitting taper / spindle bore MK 5 / 30 mm Speeds 60 / 175 / 270 / 600 U/min Spindle drive 5,5 kW Total electric load approx.. 13 kW - 400 V – 50 Hz Weight approx. 3.500 kg Accessories / Special Features: • Electrohydraulic conventional control and drives with a large variablilty and high und high resolution. • MAGNESCALE 2 axis digital read out for Z- and X- axis (linear and diameter display) • Preinstalled automatic cycles for plunge-in grinding, traverse grinding, internal grinding with roughing, finishing, fine-finishing, spark-out (also prepared for use of structure sound sensor and gauge control) • Turret wheelhead with manual B-axis 0-180° with cylindrical grinding spindle left, 5,5 kW and internal grinding spindle with oilmist-lubrication Ø 0 mm, 40.000 rpm, 1,5 kW • Workhead, hydrodynamic bearing, swivable 90°, sine ruler, aircushion • Precision tailstock with fine setting to correct for cylindricity • Machine base made of mineral catsting GRANITAN S3 for high excellent dimensional accuracy, themal stability and dampening characteristics. • Adjustable Dresser mounted on tailstock, hinged dresser for table mount, swivable dresser for table mount • Collet device with many SCHAUBLIN high precision collets Ø 1 – 25 mm • Wide range of accessories as 2 grinding wheel flanges, various internal grinding mandrels, 2 pieces face plates, balancing arbor, var. centers and mandrels, MK adapters, var. sleeves, var. covers, auxiliary pulley, large bandfilter coolant unit, manuals, etc. Condition : excellent, 7.515 hours, universal machine for all sorts of grinding tasks ! Video : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, before loading

Condition: used, Year of construction: 1980, workpiece diameter 600 mm workpiece weight 400 kg workpiece height 300 mm total power requirement 35 kW weight of the machine ca. 4500 kg Djdpst Abrwjfx Ah Uscp