Condition: used, Year of construction: 2004, Functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: DEMAG Typ: Concept 350/710-2300 Baujahr: 2004 Schließkraft 350 Tonnen Holmabsta 630 x 630 mm Einbauhöhe min.: 330 mm Öffnungsweg: 675 mm Schnecken DN: 55 mm Max. Hubvolumen: 890 cm³ Spritzteilgewicht: 800 g/PS Steuerung: NC4 Cob Eztswa Trgec Asgt Ausstattung: Ausstattung: Roboter, Hersteller: WITTMANN 2 St. Kernzüge Hochverschleißfeste Spritzeinheit Verfügbar ab 16. KW/2025

Condition: good (used), Year of construction: 2004, 1x Arburg 820S 4000-2100 Ma-No. 195746 Year of construction: 10/2004 Core pulls: 2x Auger: 80mm Cgeb Eztswfr Dxec Ajt incl. Multilift and safety fence

Condition: ready for operation (used), Year of construction: 2005, Krauss Maffei KM 65-180 CX injection molding machine Year of manufacture: 2005 Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in diskette drive. Plasticizing system Screw diameter: 30 mm Nozzle radius: 12 mm Nozzle opening diameter: 4 mm TECHNICAL DATA (standard version) Closing unit Mould closing force: 650 kN Mould opening force: 55 kN Clamping plate dimensions (W x H): 670 x 670 mm Cgsbjwgam Do Eztc Ajt Clearance between columns (W x H): 420 x 420 mm Mould opening stroke: 500 mm Min. mould height: 250 mm Maximum opening width: 750 mm Ejector stroke: 150 mm Ejector force (forwards / backwards): 23 / 10 kN Injection unit Screw diameter: 30 mm Length to diameter (L/D): 23.3 Injection pressure: 2025 bar Injection volume: 38.5 cm³ Injection weight (for PS): 77 g Injection efficiency: 106 cm³/s Screw speed (standard): 477 rpm Plasticization efficiency: 16 g/s Electric-hydraulic equipment Pump motor power: 15 kW Installed heater power: 8 kW Number of cylinder heating zones: 5 Dry cycle time (Euromap 6): 1.6 s / 294 mm Oil tank capacity: 280 l Dimensions and weight Net weight (with control cabinet): 3.5 t Machine dimensions (L x W x H): x W x H): 3.98 x 1.48 x 2.02 m

Condition: used, Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 28460, clamping force: 3,500 kN, screw diameter: 55 mm, clearance between the columns: 950 mm, overall weight: 5,000 kg, pump power: 45,000 W, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, ENGEL ES1350/350 HL Injection Molding Machine with Robot – Year 1995 Specifications: - Manufacturer: ENGEL - Model: ES1350/350 HL - Year: 1995 - Clamping force: 3500 kN (350 t) - Control unit: Core pull on moving platen - Robot included: ENGEL ERC 53/2-CL (1995) Condition: Machine is fully operational and currently running in a continuous production cycle. Cgeb Eztcowglwbe Ajt Included: - Take-out robot - Full documentation - Electrical and hydraulic diagrams Location: Poland

Condition: reconditioned (used), operating hours: 40,662 h, Functionality: fully functional, clamping force: 306 kN, screw diameter: 28 mm, injection pressure: 1,340 bar, ejector stroke: 80 mm, total length: 2,520 mm, total width: 860 mm, total height: 1,900 mm, overall weight: 1,150 kg, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 30M injection moulding machine. Cgob Ezev S D Svstc Ast Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: used, Year of construction: 2007, Engel VICTORY 330/60 Tech (2007) Closure system: Hydraulic Ceb Esv E I Tweztc Aegt Closure force: 600 kN Tiebarless Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 kN Injection system Screw diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2,400 bar

Condition: used, Year of construction: 2005, Hersteller: KRAUSS MAFFEI Typ: KM300-1400C2 Cgsb Esvzqhvoztc Aot Baujahr: 2005 Schließkraft 300 Tonnen Holmabsta 630 x 630 mm Einbauhöhe min.: 330 mm Öffnungsweg: 820 mm Schnecken DN: 45 mm Max. Hubvolumen: 373 cm³ Spritzteilgewicht: 335 g/PS Steuerung: MC3+ Ausstattung: 2 St. Kernzüge an BWAP Hochverschleißfeste Spritzeinheit Eine zweite zusätzliche Spritzeinheit DN 45 mm Innendruckmessung Kistler Verfügbar ab 16. KW/2025

Condition: excellent (used), Year of construction: 2000, Demag Ergotech 350-115 viva Closing 35 tons Csb Eswgdhljztc Aogt Scrow 25mm Pls sprue picker

Year of construction: 2016, Condition: ready for operation (used), This HAITIAN MARS MA10000 II was manufactured in 2016. It's a hydraulic injection moulding machine, ideal for efficient and precise large-scale production. Consider the opportunity to buy this HAITIAN MARS MA10000 II hydraulic injection moulding machine. Contact us for more information. Cgeb Ejwa El Soztc Aot Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2008, operating hours: 58,000 h, Functionality: fully functional, clamping force: 100 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 20 bar, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 100 mm, overall weight: 3,900 kg, Hello dear customers, We have great cleanroom machines in our program again. Ceb Eztcet A Ufwj Ajgt Here we offer this Engel e Max cleanroom machine from 2008. This machine is equipped with a GEKU SR 500 ST linear robot. The machine has run almost 58,000 pump hours in automatic mode. The machine comes from a well-known manufacturer in the pharmaceutical industry, so the machine, including handling, was subject to very strict maintenance management and is in the very best condition for its age. There is hardly any damage to the paintwork. I would be happy to send you further information and make you an offer. I look forward to your inquiry. With sunny greetings Nick Schönfeld

Condition: refurbished (used), Year of construction: 2009, Equipment: documentation/manual, Sumitomo Demag IntElect 160/520-1000 NC 5 Year of manufacture: 2009 Control / Programming: NC 5 Screw: 50 mm Injection volume: 442 cc / 393 g Clamping force 1600 kN Tiebar spacing 520 mm x 520 mm Mold height min 275 mm – 585 mm Plate spacing max. 1080 mm Mold opening stroke 495 mm Ejector stroke 120 mm Core pull 2x Plug ejector plate safeguarding Equipment: 2-circuit core pull in series with mold movement (1x fixed platen + 1x movable platen) Ejector parallel to mold movement Clamping force controlled Freely programmable inputs and outputs (4 inputs/4 outputs) (for 5/2-way pneumatic valve) Switch-on/shutdown program (with spraying) Interface for Handling, Euromap 67 (50-pin) Interface for mold protection (ejector plate protection) Integrated hot runner control, 2 zones Mold protection Intruding Plug combination for electrical connection, Change journal, PDE control, graphic MWE1 + MWE2 graphic Cgob Eowd Afksztc Aet

Condition: excellent (used), Year of construction: 2006, Technical Specifications Year of manufacture: 2006 Clamping side Cob Eswdxd Asztc Aegt Clamping force: 8000 kN Maximum clamping platen: 1520 mm Clearance between tie bars: 1170 mm Min. installation height: 700 mm Max. installation height: 1300 mm Max. distance between platens: 2300 mm Opening stroke/max. installation height: 1000 mm Ejector stroke: 300 mm 1st injection side Screw diameter: 105 mm Displacement: 4160 cc 2nd injection side Screw diameter: 90 mm Displacement: 3050 cc Technical Specifications Clamping side Clamping force: 8000 kN Maximum clamping platen: 1520 mm Clearance between tie bars: 1170 mm Min. installation height: 700 mm Installation height Max.: 1300 mm Max. platen spacing: 2300 mm Max. opening stroke/installation height: 1000 mm Ejector stroke: 300 mm 1st injection side Screw diameter: 105 mm Displacement: 4160 cc 2nd injection side Screw diameter: 90 mm Displacement: 3050 cc

Year of construction: 2004, Condition: excellent (used), Capacity - 400 performs/min. Year - 2004/2008 Factory Consists : 1. Injection Moulding machine -Manufacturer - KRAUSS MAFFEI - Year - 2004 - Tip - 175-3500 CV - Power - 110 Kw - Clamping force - 1750 KN 2. Robot with Catcher for 48 performs - Year - 2004 - Tip - CB-PET 40 Fach 3. Preform Cooling Unit - Manufacturer - MHC Luksemburg - Year - 2004 - Tip - PL3 4. Injection Moulding Tool - Manufacturer - MHT Luksemburg - Year - 2004 - Preform Weight - 40,56 gr - Ejection Stroke - 114 mm - Weight of tool - 1150 Kg 5. Granulate Dryer - Manufacturer - PIOVAN - Italy - Tip - DP 625 - Year - 2004 - Power - 110 Kw 6. Granulate Silo - Manufacturer - PIOVAN - Year - 2004 - Tip - 4000 7. Cooling sistem - Manufacturer - PIOVAN -YEAR - 2004 - Tip - RPA 1200 Cgsb Eztegbpnmsc Aot - Power - 10,5 Kw 8. Crane - Year - 2008 - Tip - KVATP 2515E3 - Capacity - 5 tons - Dimensions - 7,5 x 2,0 mC -

Condition: excellent (used), Year of construction: 1993, Demag Cob Eowgdd Teztc Aogt Ergotech 200-50 Compact Closing 50 tons Scrow 30mm Hole spacing 35.5x35.5

Condition: good (used), Year of construction: 2002, Controll : MC4 Clamping force: 1000 t Screw diameter: 85 mm Shot weight: 2452 g Distance between tie bars V: 1120 mm Distance between tie bars H: 1400 mm Shot volume: 2450 cm3 Type: Horizontal Drive: Hydraulic Mould Height Min/Max: 700-1200mm Opening stroke max.: 1700mm Daylight: 2400mm Cjb Eztjwb Evysc Aegt Hotrunner pneumatic controls: 4 Cascade controls penumatic and hydraulic : 4

Condition: new, Year of construction: 2024, Functionality: fully functional, clamping force: 500 kN, screw diameter: 32 mm, injection weight: 69 g, overall weight: 2,430 kg, Dear Customers, For sale is a brand new BOY 50 E injection molding machine from 2024 – an absolute highlight for your production and available immediately!!! Due to a project pause, we are offering this machine with a silicone unit for sale. BOY will commission the entire system this week, week 14, and a video of the commissioning will be posted online afterwards. All further technical data can be found on my machine trading website. Cgjb Eztev T Uuwjc Ajt Best regards, Nick Schönfeld

Condition: excellent (used), Year of construction: 2007, operating hours: 59,000 h, Technical Specifications Year of manufacture: 2007 Clamping side Clamping force: 13,000 kN Opening stroke/max. installation height: 2,300 mm Max. distance between clamping platens: 4,000 mm Min./max. mold installation height: 1,000 - 1,700 mm Max. clamping platen height: 1,910 mm Min. mold size: 1,020 x 820 mm Clearance between tie bars: 1,500 mm Nozzle radius: R40 mm Mold weight: 29,000 kg Ejector stroke: 350 mm 1st injection side Screw diameter: 120 mm Cgsb Eswdw E Sjztc Ast Displacement: 6,786 cc 2nd injection side Screw diameter: 105 mm Displacement: 5,195 cc NC5 control system Core pulls AWS/DS: 1/1

Condition: excellent (used), Year of construction: 1991, Arburg 270M-500-210 Closing 50 tons Ceb Ezjwgc Epjtc Aogt Scrow 40 mm Injection softened 188 cm3

Condition: like new (used), Year of construction: 2020, Arburg ALLROUNDER 920H 5000-4600 (2020) Clamping force: 500 t Machine type: Hybrid Year: 2020 Screw diameter: 80 mm Shot weight: 1653 g Injection volume: 1810 cm3 Drive: Hybrid Arburg ALLROUNDER 920H Distance between tie bars : 920x 920 mm Clampping force : 5000 kN Opening force : 900 mm Mould mounting platens : 1280 x 1280 Weight of movable mould half : 6000 kg Screw diameter : 80 mm Injection unit Screw stroke : 360 mm Injection pressure max : 2500 bar AED - electro-mechanical dosing drive, precise and energy-saving dosing as well as gentle material preparation, with short cycle times Clamping unit - Servo-electric toggle-type clamping unit with short dry cycle times Position-regulated auger with control valve on the injection unit, including reverse regulation pressure, pressure force of the nozzle manually adjustable. 4 Electric and pneumatic control of needle-type 1x Hydrulic ejector Cgjbsuzmpgo Eztc Aot 2x Air blow Accumulators Machine weight : 31 700 h Lenght : 9490 mm Height : 2838 mm Width : 1100 mm only 492 hours! new machine

Condition: good (used), Year of construction: 2007, operating hours: 71,303 h, Functionality: fully functional, machine/vehicle number: 1634.., clamping force: 7,500 kN, screw diameter: 90 mm, injection weight: 2,850 g, plate length: 1,250 mm, plate width: 925 mm, Equipment: documentation/manual, This angel is in very good condition. One bar can be pulled out to better fit the shape. Cgjb Eovta Ntsztc Aot

Condition: excellent (used), Year of construction: 2002, Arburg 221K-350-100 Closing 35 tons Year of manufacture 2002 Scrow 25mm Injection soaked 49 cm3 Cjb Ezewgc Dretc Asgt

Condition: excellent (used), Year of construction: 2011, operating hours: 74,000 h, Functionality: fully functional, clamping force: 1,100 kN, screw diameter: 20 mm, Equipment: documentation/manual, Top Offer: Arburg 470S 170/70 2-Component Injection Molding Machine (2011) This reliable machine offers outstanding performance and versatility—perfect for demanding production requirements. Main Features: Condition: Well maintained and ready for use Mileage: 9.3 million cycles Operating hours: Ceb Ezov Rf S Ujtc Ajgt Manual operation: 74,500 hours Automatic operation: 70,000 hours Injection units: Horizontal: Ø 170 mm, max. 36.2 cm³ Vertical: Ø 70 mm, max. 21.4 cm³ Technical Highlights: Opening stroke: 850 mm Electric indexing Integrated 15-zone hot runner 3 core pulls & 2 blow-out stations (including needle valve control) Additional functions: Multilift H (6 kg capacity) with: 2 vacuum connections 5 double-acting grippers Servo Z-axis (800 mm) Pneumatic control for C-, G-, X-, and B-axis Interfaces for ALS and temperature control units Included additional equipment: 2 Farrag Tech dryers (20S & 10S), compatible with dryer interfaces. This machine meets the highest requirements and is perfect for precise and efficient injection molding processes. Don't hesitate – For more information or to schedule a tour, contact us today.

Condition: good (used), Year of construction: 2006, Functionality: fully functional, clamping force: 2,600 kN, Equipment: documentation/manual, Dear Sir or Madam, Cgjb Ezsvxkpnetc Ajt This Engel is just arriving and is being sold on behalf of the customer from direct production. The machine is of course thoroughly tested and cleaned before being switched off. The machine can be inspected on site under load. With sunny greetings Nick Schönfeld

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, overall weight: 10,600 kg, Hello dear customers, We have great cleanroom machines in our program again. Here we offer this Engel 2-component cleanroom machine from 2006. This machine can be purchased as a package with a GEKU SR 500 ST. A conveyor belt, protective cage and turntable are available as accessories. The machine has run just under 33107 hours in automatic mode. The machine comes from a well-known manufacturer in the pharmaceutical industry, so the machine including handling was subject to very strict maintenance management and is in the very best condition for its age. There is hardly any damage to the paintwork. I would be happy to send you further details and an offer. With best regards Cob Ezjt A Ui Astc Asgt Nick Schönfeld

Condition: good (used), Year of construction: 2008, Functionality: fully functional, clamping force: 5,500 kN, screw diameter: 90 mm, clearance between the columns: 914 mm, column diameter: 155 mm, displacement volume: 2,480 cm³, Equipment: documentation/manual, Here we are offering a freshly arrived Engel CL 4550/550 built in 2008 Please ask for more information. Cjbovw Ad Us Eztc Asgt Regards, Nick Schönfeld