Condition: good (used), Year of construction: 2008, Ref. no.: 171 Hersteller: ENGEL Type: VC 1050H/200W/200V(TOP4)/400 Combi-WP 6K Cob Hewgpwxjd Abijgt Year of construction: 2008 Clamping unit Clamping force: 400 ton Opening width: 1008 mm Platen size (h x v): 1300 x 1460 mm Injection unit Screw diameter: 50 mm Injection volume: 422 cm³ Shot weight: 0 g Injection pressure: 2322 + 00 + + + + bar Measurements and weight Machine weight: 22000 + 6600 kg Dimensions LxWxH part 1: 5 x 2,3 x m Dimensions LxWxH part 2: 3,9 x 2,3 x m

Condition: ready for operation (used), Year of construction: 2006, operating hours: 77,000 h, Functionality: fully functional, clamping force: 5,000 kN, screw diameter: 100 mm, Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 136 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95/48 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1411 bar Stroke volume 2411 ccm Shot weight (PS) 2194 gr. Injection rate 801 ccm/s Screw speed 189 1/min Plasticising rate max. 161 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Cgeb Hd Aowgni Hobist Adjustable barrel heating zones 7 Oil Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,50 x 2,50 m Total machine weight 27090 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads - 2 x 8 fold water flow regulator Additional Options: - 2 x hydr. core pull on movable plate - 2 x hydr. core pull on fix plate - Robot interface according to Euromap 12 - 16 x hotrunner controller - 1 x air valve on movable plate

Condition: excellent (used), Year of construction: 2021, ENGEL DUO 17060/2700 (2021) 🔧 Technical Specifications • Clamping force: 27,000 kN • Tie bar spacing (horizontal × vertical): 2,130 × 1,750 mm • Platen size: 2,970 × 2,640 mm • Mold height (min–max): 800 – 1,900 mm • Opening stroke: 3,100 mm • Max. distance between platens: 5,090 mm • Dry cycle (Euromap 6, 6 mm stroke): 5.8 s • Max. mold weight (fixed/moving platen): 50,000 kg each 🧩 Injection & Plasticizing Unit • Screw type: S4V G18 • Screw diameter: 150 mm • Injection volume: 10,780 cm³ • Injection pressure (max): 1,620 bar • Injection speed: 87 mm/s • Plasticizing rate (barrier screw): 235 g/s • Screw speed: up to 115 rpm 🔩 Nozzle & Ejector • Nozzle stroke: 1,300 mm • Nozzle contact force: 210 kN • Ejector stroke: 400 mm • Ejector force: 385 kN ⚙️ Drive & Power Cgsb Hewd Sywod Abiet • Main motors installed power: 192 kW • Reload pump motor: 16 kW • Oil reservoir capacity: 1,600 liters • Main power: 3×400V, N+PE / 50 Hz ➕ Additional Features & Configuration • T-slot platen with ejector back confirmation • Locating ring Ø 120 mm • Sprue bush “R”: 19 mm • Hydraulic corepull 2+2, air valve 1+1 • Mold heating control with 144 zones (24pin, K-type) • Valve gate interface with 36 zones (16pin DC24V) • Abrasion/corrosion-resistant screw barrel • Servo hydraulic drive • Oil maintenance system • UPS (AVR) backup unit • Robot interface EM67 • Cooling circuit: 1” inlet, 2 zones per platen (90°) • Autoclamp system for fast mold changes

Condition: ready for operation (used), Year of construction: 2003, operating hours: 33,063 h, Functionality: fully functional, clamping force: 220 kN, screw diameter: 22 mm, injection pressure: 1,732 bar, injection weight: 27 g, Newly refurbished, we have this BOY 22D. The machine is a compact 22 tonne clamp machine with a very easy to use controller with the Dipronic system. These machines have stood the test of time and remain very popular as they are simple to use, cheap to repair and reliable. Fitted with a 22mm diameter screw, which gives a max shot weight PS (g) of 27. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Csb Howak Edsd Abiegt

Condition: used, Year of construction: 2004, operating hours: 63,107 h, Functionality: fully functional, machine/vehicle number: 61004849, clamping force: 125 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, injection weight: 142 g, mold height (min.): 300 mm, overall weight: 6,000 kg, Equipment: documentation/manual, We are offering our Krauss Maffei KM125-390 C2 for sale. The machine has been replaced. Until the replacement, it was in continuous operation in our production facility. If you are interested in arranging a viewing, please contact us. We may require some lead time to reconnect the machine to the power supply. If you would like a viewing without the power supply, we are happy to arrange a short appointment. If you are interested, we can also send you a short video of the machine in operation. Cgsb Hov Rbpved Abiet

Condition: good (used), Year of construction: 1998, operating hours: 65,000 h, clamping force: 3,300 kN, screw diameter: 70 mm, clearance between the columns: 710 mm, displacement volume: 1,039 cm³, injection pressure: 1,400 bar, injection weight: 940 g, DEMAG ERGOTECH 330 T injection molding machine in good condition Reference: Ergotech E330-1450-NC4S Year: 1998 65,000 operating hours Screw diameter: 70 mm L/D ratio: 20 Injectable volume: 1039 cm3 Injectable weight in PS: 940 g Injection pressure: 1400 bar Maximum dosing stroke: 270 mm Csb Hdowcq A Uo Abiogt Heating power: 27 kW Plate dimensions: 1040 x 950 mm Distance between columns: 710 x 630 mm Mold thickness: 330 - 710 mm Maximum opening stroke: 675 mm + SEPRO robot type 3031 YN MPA II X axis: 2500 mm Y axis: 800 mm Z axis: 1400 mm Machine dimensions: 6.50 x 2.00 x 2.30 m Machine weight: 14,300 kg

Condition: good (used), Year of construction: 2008, Ref. no.: 17147 Hersteller: ENGEL Type: VC 1050H/200W/200V(TOP4)/400 Combi-WP 5K Year of construction: 2008 Clamping unit Clamping force: 400 ton Opening stroke: 1008 mm Platen size (h x v): 1360 x 1460 mm Injection unit Csb Hd Abewgpwroisgt Screw diameter: 60 mm Injection volume: 608 cm³ Shot weight: 7 g Injection pressure: 17 + + + + bar Measurements and weight Machine weight: 22.000 + 6.600 kg Dimensions LxWxH part 1: 5 x 2,3 x m Dimensions LxWxH part 2: 3,9 x 2,3 x m

Condition: used, Year of construction: 2008, Functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, displacement volume: 156 cm³, injection pressure: 2,180 bar, injection weight: 139 g, With Robotsystem Cebewgc R Sj Hd Abijgt

Condition: good (used), Year of construction: 2006, Model: HM 210/1000 S Clamping force: 210 t Cgob Hd Abeu Ekbhsist Distance between tie bars: 630 x 570 mm Mould height: 300 mm Daylight max. : 1050 mm Screw diameter: 50 mm Injection pressure: 2016 bar Injection volume: 491 cm3 Shot weight: 440 g Transport parameters: weight 10000 kg, L x W x H: 5000 x 1700 x 2300 mm Controll: Unilog B4 Videos on request.

Year of construction: 1999, Condition: ready for operation (used), General Data Machine weight 61900 kg This DEMAG Ergotech 10000-8000 was manufactured in 1999. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing tasks. Consider the opportunity to buy this DEMAG Ergotech 10000-8000 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Cgeb Hjwchxasd Abiet

Condition: used, Year of construction: 2019, clamping force: 700 kN, screw diameter: 100 mm, displacement volume: 3,691 cm³, injection pressure: 1,780 bar, overall weight: 34,000 kg, Freight basis: ex-site Delivery time: by arrangement Cgeb Howc D T Hsd Abist Payment terms: 100% before taking delivery of the machine, net

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine mit Roboter Cjb Hd Abowcb Nreiegt Hersteller: KRAUSS MAFFEI Typ: CX250-1000 Baujahr: 2010 Schließkraft 300 Tonnen Holmabsta 630 x 630 mm Einbauhöhe min.: 330 mm Öffnungsweg: 820 mm Schnecken DN: 50 mm Max. Hubvolumen: 432 cm³ Spritzteilgewicht: 393 g/PS Steuerung: MC5 Ausstattung: Roboter, Krauss Maffei, Typ: LRX100S 2 St. Kernzüge an BWAP Hochverschleißfeste Spritzeinheit

Condition: good (used), Year of construction: 2004, Ref. no.: 17146 Hersteller: ENGEL Cgeb Hjwgpwlod Abiet Type: ES 750H/80W/(500V)/300HL-2F Year of construction: 2004 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Injection unit Screw diameter: 50 + 25 mm Injection volume: 393 + 49 cm³ Shot weight: 354 + 44 g Injection pressure: 1917 + 1586 bar Measurements and weight Dimensions: 6,5 x 2,3 x m Machine weight: 21000 kg

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 620 mm, displacement volume: 156 cm³, injection pressure: 2,180 bar, injection weight: 139 g, With Robotsystems Cjb Hdjwgcx Ao Abijgt

Condition: good (used), Year of construction: 1998, clamping force: 110 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 158 cm³, injection pressure: 2,429 bar, injection weight: 142 g, plate length: 770 mm, plate width: 745 mm, total length: 4,300 mm, total width: 1,500 mm, total height: 2,200 mm, overall weight: 5,800 kg, Core pull 1 Cgjb Hd Abswgi Tyoijt without robot

Condition: ready for operation (used), Year of construction: 2019, operating hours: 20,000 h, General Data Machine weight 6500 kg Control Unit Brand ENGEL Main Drive Spindle motor power 92 kW Injection Unit Screw diameter 60 mm Stroke volume 315 mm Injection pressure 2400 bar Screw speed 220 min-1 Nozzle pressure 2400 bar Clamping Unit Clamping force 6500 kN Opening stroke 1400 mm Distance between bars 1100x960 mm Mould height min 350 mm Mould height max 850 mm Size of mold platens 1510x1440 mm Ejector stroke 250 mm Ejector force for / back 95 kN Additional Equipment Oil Reservoir Capacity - Injection Unit: 500 l Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool Water Consumption (32°C): 4.80 m3/h General Data Machine weight 6500 kg Control Unit Brand ENGEL Main Drive Spindle motor power 92 kW Injection Unit Screw diameter 60 mm Stroke volume 315 mm Injection pressure 2400 bar Screw speed 220 min-1 Nozzle pressure 2400 bar Clamping Unit Clamping force 6500 kN Opening stroke 1400 mm Distance between bars 1100x960 mm Mould height min 350 mm Mould height max 850 mm Size of mold platens 1510x1440 mm Ejector stroke 250 mm Cgob Hd Aswchw Aebiet Ejector force for / back 95 kN Additional Equipment Oil Reservoir Capacity - Injection Unit: 500 l Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool Water Consumption (32°C): 4.80 m3/h This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Year of construction: 2004, 570 C 2200 - 675 Thermoplastic cylinder cpl. 55 mm highly wear-resistant Technology level 2 servo-controlled with 2 control pumps Thermoplastic processing Open nozzle 55 mm Nozzle tip radius 35 Heating tape for open nozzle Heating tape for extended nozzle tip Nozzle tip Clamping plate set 570 central Ø 125 mm Connection for blow-out device 1 Selector unit incl. connection Core pull 1, simultaneous movement Holding pressure manually adjustable Power-operated safety slide Robot system interface (to EUROMAP 12), 32-pin ARBURG master computer interface Power socket vert. 1 CEE, 1 additional Schuko Cutting unit Temperature control unit WKZ 20 mA Interface printer serial V24 Parallel connection for heating tape nozzle tip Interface coloring device Low-current switch cabinet 400 x 800 Heavy current switch cabinet 800 x 800 4 free cooling circuits manually adjustable Machine-related cooling circuits controlled Extended monitoring equipment package Equipment package extended movements Production control equipment package Optimization / operating aids equipment package Cgjb Hewgb E Iod Abiet Quality assurance equipment package Documentation equipment package Without granulate container 50 L Injection control TFT color monitor Oscillating elements Selogica control (sequence editor) Connection ejector plate safety device Ejector quick-release coupling Water-cooled switch cabinet Power socket vert. 1 CEE, 1 Schuko Hydraulic ejector Larger holding pressure pump for simultaneous movements of the secondary axes, e.g. core pull functions during mold opening Cycle start when closing protective hood

Condition: excellent (used), Year of construction: 2014, operating hours: 14,500 h, Functionality: fully functional, 1,0 St. gebr. Vertikal Spritzgießmaschine Hersteller: ARBURG Typ: 375V500-100 Drehtisch Baujahr: 2014 Schließkraft: 50 Tonnen Schnecken DN: 25 mm Cjb Hd Aewca T Nsbijgt Max. Hubvolumen: 59 cm³ Steuerung: SELGOCIA Ausstattung: Drehtisch zweiteilig Durchmesser 1.000 mm

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Hersteller: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Csb Hd Aswgpwfsbiogt Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg

Condition: used, Year of construction: 2008, operating hours: 75,000 h, Functionality: fully functional, clamping force: 2,800 kN, screw diameter: 45 mm, clearance between the columns: 630 mm, displacement volume: 368 cm³, injection pressure: 2,402 bar, injection weight: 320 g, opening stroke: 675 mm, plate width: 950 mm, plate height: 950 mm, installation height: 710 mm, total length: 6,620 mm, total width: 1,920 mm, total height: 2,250 mm, overall weight: 13,000 kg, Core pull 2-fold, 6-fold cascade, with robot Cgjbowgcmgo Hd Abist

Condition: excellent (used), Year of construction: 2000, operating hours: 46,000 h, Functionality: fully functional, machine/vehicle number: 180316, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, Fully functional plastic injection molding machine with associated documentation and diskettes. The machine operated in clean production. Cgob Hd Asv N D Raobiet The machine was injection molded with LDPE material, so the tip and screw are in first-class condition. Every 2 years, the pressures were checked and confirmed by an Arburg authorized service.

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 4450000410, clamping force: 500 kN, screw diameter: 32 mm, column diameter: 45 mm, displacement volume: 95 cm³, injection pressure: 1,076 bar, injection weight: 69 g, mold height (min.): 250 mm, overall weight: 2,430 kg, power: 16.8 kW (22.84 HP), Equipment: documentation/manual, Dr.Boy LSR (silicone) injection molding machine, built in 2024, is being sold unused due to project cancellation. Equipment Evacuation Csb Hd Absv R Ia Isiogt Interface for brush control Interface for handling device (EUROMAP 67)

Condition: excellent (used), Year of construction: 2017, 1x used Arburg 1500T 1600-170 Ma-No. 241988 Year of manufacture: 08/2017 Complete thermoplastic cylinder, 30 mm, highly wear-resistant Standard screw coupling, two-edge coupling geometry Selogica direct control system Technology level 2, servo-driven with 2 control pumps Special model rotary table, ergonomic design Thermoplastic processing 2-station rotary table, 180° forward/backward alternating Open nozzle, 30 mm Nozzle tip radius 35 mm Heating band for open nozzle Central clamping platen set, Ø 125 mm Blow-out device 1 with pressure reducer at station 1 Connection for blow-out device 2 at station 2 Connection for tool position monitoring on the movable mold platen Connection for tool position monitoring on the rotary table Core pull 3, simultaneous travel movement P/Q controlled, programmable Core pull 4, simultaneous travel movement P/Q controlled, programmable Core pull 1+2, on the rotary table P/Q controlled, programmable Light curtain at 180° Continuous oil cooling and filtration Connection for oil bypass filtration Extension pipe for granulate container Injection compression molding and venting with clamping unit Interface to host computer OPC-UA 8 programmable inputs/outputs Socket combination 1CEE, 1 Schuko, protected by a 30mA Type B residual current device Socket combination 3CEE, 3 Schuko, protected by a 30mA Type B residual current device Interface WKZ 20 mA temperature control unit HB-THERM temperature control unit connection cable Printer serial USB interface CompactFlash interface for data storage Operator authorization with chip card according to EUROMAP 65 9 electrical heating control circuits for tool heating Inking device interface Lighting in the loading area 7 free cooling circuits, manually adjustable 2 cooling circuits on a moving plate for water, max. 60°C 2 cooling circuits on a turntable for water, max. 60°C 2 temperature control circuits on a moving plate for water, max. 140°C 4 temperature control circuits on a Water rotary table, max. 140°C Machine-specific cooling circuits controlled Extended monitoring package Extended travel motion package Production control package Optimization/operating aids package Quality assurance package Documentation package Axis monitoring package aXw Control ScrewPilot for 1st injection unit 8-way rotary union, top-mounted Cob Hd Abjwgb Ezjisgt Corrosion protection treatment for rotary table Circumferential sealing lip on the outside

Condition: good (used), Year of construction: 2010, 1x used Krauss Maffei KM 300-2000-380-CX with robot, safety fence, conveyor belt, and turntable! Year of manufacture: 2010 Machinery No. 61014333 Horizontal screw: 70 mm Vertical screw: 30 mm Core pulls: 4x Hot runner control stations: 16 zones Cob Hd Abswgb Eneijgt The machine is available immediately!

Condition: good (used), Year of construction: 2007, operating hours: 55,000 h, 1x used Arburg 570C 2000-800 Golden Edition Year of construction: 09/2007 Ma-No. 206432 Auger: 50mm Blow-off valve: 2x Core pull: 1x Handling interface Host computer interface Printer interface Interface for inking unit Connection for conveyor belt via 5-pin plug Connection for selection unit The machine is sold without any other visible peripherals / tools! Cgjbswgb Ebo Hd Abijt