Condition: excellent (used), Year of construction: 2003, Demag Ergotic system Dsb Her Avfneb Hzvokl Closing 35 tons Year of manufacture 2003

Condition: excellent (used), Year of construction: 2002, operating hours: 18,800 h, screw diameter: 25 mm, displacement volume: 59 cm³, injection weight: 54 g, BATTENFELD vertical injection press Reference R600 / 125 V Dobevkx D Re Hb Hzvjkl UNILOG B4 control Rotary plate diameter: 896 mm Number of hours: 18,819 hours Year: 2002 Screw diameter: 25 Injection pressure: 2149 bars Injectable volume: 58.9 cm3 Injectable weight in PS: 53.6 Gr Screw L/D ratio: 21.6

Condition: good (used), Year of construction: 2001, Netstal S-2400-900 injection molding machine Year of construction 2001 CLOSING SYSTEM Closing force / (Ton) 240 Space between columns (mm) 630x630 Plate size (H x V) (mm) 907x910 Mold height (max-min) (mm) 460-800 Dksb Hb Hsrbzbbszvol Daylight between plates / Space between plates (mm) min. 460 Opening stroke / Opening stroke (max.) (mm) 0-510 Ejector force / Ejection force ( kN) 59.4 Ejector stroke / Opening stroke (mm) 175 INJECTION SYSTEM Auger diameter (mm) 55 Injection weight (Max.) (Material)(g) 456 (PS) Injection volume / (cm3) 475 Injection pressure (bar) 1890 Injection speed (cm3/s) 2375 Nozzle force / Nozzle force (Max.) (Ton) 88 Nozzle stroke / Nozzle stroke (Max.) (mm) 200 Plasticizing capacity / plasticizing capacity (g/s) 70 Number of heating zones / number of zone heaters 6+1 cooling Heating power / heating capacity (kW) 30.3 OTHER DATA Oil tank capacity (Liters) 420 Weight (kg) 15800 Dimensions (DxSxW) 6950x2075x2480 mm

Year of construction: 2002, Condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Dksb Heuiykdeb Hzvol

Condition: excellent (used), Year of construction: 1999, Battenfeld BA 1 TM Closing 100 tons Scrow 40 mm Year 1999 Dksbor Nf Rgj Hb Hzvol Spritz softened 204 g Bar spacing 42x42

Condition: excellent (used), Year of construction: 2004, Arburg 320K 700-250 Injection Moulding Machine Year of manufacture -2004 Control - Selogica CLOSING UNIT Closing force (Ton) 70 Space between columns(mm) 320x320 Diameter of column (mm) 60 Plate size (H x V) (mm) 476x476 Mould height (Max.- Min) (mm) 400-200 Space between the platen (mm) 650 Closing speed (mm/s) 88 (l/min) Opening stroke (Max.) (mm) 250 Ejection force (kN) 30 Dkjbsq A Rp Ns Hb Hzvol INJECTION UNIT Screw diameter (mm) 30 Injection weight (Max.) (g) 89 Volume (cm3) 106 Injection pressure (bar) 1820 Injection speed (cm3/s) 121 Nozzle force (Max.) (Ton) 70 Nozzle stroke (Max.) (mm) 240 Plasticization capacity (g/s) 103.04 Number of heating zones 5 Heating power (kW) 6.1 OTHER DATA Oil tank capacity (Liters) 120 Weight (kg) 2190 Dimensions (LxWxH) (m) 3.37x1.405x1.99

Year of construction: 2003, Condition: ready for operation (used), There are five injection moulding machines Arburg available. 1) Arburg 320C 600-250, year of construction: 2001, operating hours: 83,365h. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h. 3) Arburg 270C 300-100, year of construction: 1999, operating hours: 78,784h. 4) Arburg 320C 300-100, year of construction: 2000, operating hours: 78,784h. 5) Arburg 270C 300-100, year of construction: 2007, operating hours: 59,885h. Deb Hb Hzetyyn Hsvokl

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Dob Hb Hzek Rnq Nsvekl Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Year of construction: 2002, Condition: ready for operation (used), Clamping force: 1000kN, screw diameter: 30mm, platen dimensions X/Y: 570mm/570mm, opening stroke: 500mm, min./max. mold height: 250mm/750mm, injection weight: 121g/hp, injection volume: 106cm³, operating hours: 75320h. Dksb Hb Hetynkvjzvel

Condition: excellent (used), Year of construction: 2012, Arburg 375 V 500-100 Vertical Injection Molding Machine Year of manufacture - 2012 Closing system : Closing force : 50 Ton Opening force max KN/mm: 40/250 Mould height, fixed / variable min. Mm: 200 Daylight of plates fixed/variable max. Mm: 450-550 Weight of the moving half of the mold max kg: 230 Ejector force/jump max. kN/mm: 30/70 Injection unit 100 Auger diameter : 20 mm Effective screw length l/d 25 Dob Hb Hji Dahlszvjkl Injection volume : 31 cm3 Injection weight : 29 g /PS Machine weight3049 kg

Year of construction: 2001, Condition: ready for operation (used), Clamping unit: approx. 26000kg, injection unit: approx. 15000kg, max. total weight of the mold: 11400kg. Hydraulic oil: (2010dm³) approx. 1800kg. Dimensions X/Y/Z: approx. 10000mm/2650mm/2450mm. Djber A Eiie Hb Hzvskl

Condition: excellent (used), Year of construction: 2013, Battenfeld HM 150/750 injection molding machine Year of manufacture - 2013 Number of working hours - 29755 Control - B6 Closing system Dkeb Hb Hzoqmfzajvjl Closing force [kN] 1500 Mounting plate dimensions (hxv) [mm] 760 x 755 Clearance between columns (hxv) [mm] 520 x 470 Injection system Screw diameter [mm] 45 Injection volume [cm3] 358 Injection weight [g] 325 Injection pressure [bar] 2116 Electric-hydraulic equipment Pump motor power [kW] 22 Heater power [kW] 13,9 Dimensions and weight Net weight with control cabinet [t] 6.6 Dimensions (L x W x H) [m] 4.6 x 1.6 x 2.2

Year of construction: 2012, Condition: ready for operation (used), Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible. Dobot E Tq Rj Hb Hzvekl

Condition: excellent (used), Year of construction: 2006, Krauss MAffei KM 300-1000 C2 injection molding machine Year of manufacture : 2006 Closing system : Closing force : 3000 kN Mold opening force, max : 160 kN Moving force of moving plate Opening : 86 kN Moving force of moving plate Closing : 68 kN Size of mold plates (h x v): 995 mm x 1050 mm Distance between columns (h x v): 630 mm x 630 mm Dkobsrbhhho Hb Hzvel Mold opening stroke: 820 mm Mold height min: 330 mm Max daylight: 1150 mm Injection system : Auger diameter: 55 mm Ls/D ratio: 20 Injection pressure: 1904 bar Injection volume : 523 ccm Injection weight, PS: 476 g Injection speed: 428 ccm/s General Data : Dimensions m : 5.97 x 2.04 x 2.36 Weight t : 12.5

Year of construction: 1997, Condition: ready for operation (used), Operating pressure: 210bar, injection force: 693kN, clamping force: 3500kN, opening stroke: 700mm, mold installation height: 600mm-950mm, power: 118kW, operating hours: 176,533h, cycles: 1,569,030. documentation available. On-site inspection is possible. Dsbjuku Sgo Hb Hzvskl

Condition: excellent (used), Year of construction: 2013, Battenfeld HM 150/750 injection molding machine Year of manufacture - 2013 Number of working hours - 29755 Control - B6P Closing system Closing force [kN] 1500 Clamping plate dimensions (hxv) [mm] 760 x 755 Clearance between columns (hxv) [mm] 520 x 470 Injection system Screw diameter [mm] 45 Dksb Herg Dgmsb Hzvol Injection volume [cm3] 358 Injection weight [g] 325 Injection pressure [bar] 2116 Electric-hydraulic equipment Pump motor power [kW] 22 Heater power [kW] 13,9 Dimensions and weight Net weight with control cabinet [t] 6.6 Dimensions (L x W x H) [m] 4.6 x 1.6 x 2.2

Condition: ready for operation (used), Year of construction: 2003, max. clamping force: 700kN, screw diameter: 20/25/30mm, max. screw stroke: 100mm, max. screw peripheral speed: 30/37/45 m/min, max. screw torque: 240/300/350 Nm. Dimensions X/Y/Z: 3300mm/1455mm/1990mm, weight: approx. 2100kg. Djb Hb Her Dd Iaszvokl

Condition: excellent (used), Year of construction: 2000, Arburg 520C 2000-675 injection molding machine Electric screw drive Year of manufacture: 2000 SELOGICA control system Closing unit Closing force [kN] 2000 Clamping plate dimensions (hxv) [mm] 685 x 685 Clearance between columns (hxv) [mm] 520 x 520 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 297 Dsb Herhkn Sjb Hzvekl Injection pressure [bar] 2080 Electric-hydraulic equipment Pump motor power [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 5.35x1.93x2.20

Year of construction: 1998, Condition: ready for operation (used), Five identical Arburg injection molding machines are available. Clamping force: 800kN, column distance: 420mm/420mm, installation height: 250mm, platen distance: 700mm, nozzle diameter: 45mm, weight: approx. 3800kg, control: Selogica 3.020. All machines include temperature control unit and conveyor belt. Documentation available. The machines are in storage. On-site inspection is possible. Dkjb Hb Hsviv Dfezvol

Condition: excellent (used), Year of construction: 2005, Arburg 570C 2200-1300 injection molding machine / Hybrid machine Year of manufacture : 2005 Injection system : Screw diameter: 60 mm Injection weight: 558 g Injection pressure: 2000 bar Metering volume: 664 ccm Dkob Herhf E Aob Hzvsl Closing system : Closing force : 220 tons Distance between columns: 570x570 mm Size of fixing plates: 795x795 mm Ejector : hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Hybrid machine: fast, energy-efficient Euromap 67 Hydraulic core pulling x 2 Injection system - bimetal Machine main motor - servo motor driven by inverter - energy saving Dimensions: Weight: 9300 kg Length/Width/Height: 6.16x1.91x2.39 m

Year of construction: 2022, Condition: ready for operation (used), A new injection molding machine including robot is available. 1) Krauss Maffei injection molding machine, year of manufacture: 2022, clamping system: hydromechanical clamping system with 2 platens. Plasticizing: 8100, screw diameter: 105mm, nozzle radius: 35mm, nozzle bore: 6mm, clamping force: 1700t, control: MC6. 2) Industrial robot Kuka IR 1200 R3100.2 F/K, max. payload: 120kg, reach: 3100mm, repeatability: +/-0.05mm, control: KR C5. Documentation available. On-site inspection is possible. Dkeb Hbovpvlcj Hzvsl

Year of construction: 1998, Condition: ready for operation (used), Clamping force: 1000kN, tie bar distance: 420mm/420mm, min. installation height: 250mm, max. opening stroke: 750mm, screw diameter: 40mm, injection volume: 226.5cm³, injection weight PE/PS: 206g/161g, injection pressure: 2164bar. Dimensions X/Y/Z: approx. 4500mm/1500mm/2000mm, weight: approx. 4700kg, control: Unilog 4000B, operating hours: 99295h. Including Euro package, ejector plate safety device, AK+ screw cylinder and storage cassette with 21 slots. Documentation available. On-site inspection is possible. Djb Hb Hst N T E Aezvjkl

Year of construction: 2005, Condition: ready for operation (used), Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Djb Hstyaypob Hzvekl

Year of construction: 2003, Condition: ready for operation (used), Clamping force: 13000kN, tie bar distance X/Y: 1600mm/1250mm, installation height min./max.: 650mm/1400mm, opening stroke: 1680mm, screw diameter: 100mm, stroke volume: 3900cm³, control: Unilog B4, operating hours: 44450h. Including linear robot Bettenfeld R15, Euromap, Europaket, various interfaces, various Mouldmaster and core pulls. 1x core pull valve and flat surface nozzle defective. Documentation available. Dob Hb Hzet Eu Dlsvskl

Year of construction: 2012, Condition: ready for operation (used), Installation height min./max.: 200mm/550mm, opening stroke: 350mm, closing force: 350kN, screw diameter: 20mm, distance between tie bars: 270mm, max. injection volume: 31cm³, operating hours: 61737h. Documentation available. On-site inspection is possible. Dksb Hb Hzet E Tq Devjl