Year of construction: 2005, Condition: ready for operation (used), Flange diameter: 160mm, clamping force: 1600kN, tie bar distance: 520mm/520mm, min. mold diameter: 350mm, min. mold installation height: 300mm, opening stroke: 650mm, platen distance: 950mm, ejector stroke: 150mm. Screw diameter: 45mm, injection pressure: 2336bar, stroke volume: 318cm³, nozzle radius: 15mm, injection volume: 134cm³, injection weight: 289g. Machine dimensions X/Y/Z: approx. 4900mm/1600mm/2200mm, weight: approx. 7400kg, operating hours: approx. 71187h. The machine has an unknown defect. Documentation available. An on-site inspection is possible. Djbjuabq Te Ep Dhbekl

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 61007465, clamping force: 3,000 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, injection pressure: 1,904 bar, injection weight: 476 g, opening stroke: 820 mm, Including robot - Wittmann W 731 X-axis: 800 mm Y-axis: 1,400 mm Z-axis: 4,000 mm TECHNICAL DETAILS Clamping force: 3,000 kN Dkjbjvzrp Ij Ep Dhbjl Mold opening force (max.): 160 kN Moving platen pusher force (opening): 86 kN Moving platen pusher force (closing): 68 kN Mold platen size (H x V): 995 x 1,050 mm Column spacing (H x V): 630 x 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum clear height: 1,150 mm Injection unit Screw diameter: 55 mm L/D ratio: 20 Injection pressure: 1,904 bar Injection volume: 523 cm³ Injection weight (PS): 476 g Injection rate: 428 cm³/s MACHINE DETAILS Machine dimensions (L x W x H): 5.97 x 2.04 x 2.36 m Total weight: 12.5 t

Year of construction: 2003, Condition: ready for operation (used), Clamping force: 13000kN, tie bar distance X/Y: 1600mm/1250mm, installation height min./max.: 650mm/1400mm, opening stroke: 1680mm, screw diameter: 100mm, stroke volume: 3900cm³, control: Unilog B4, operating hours: 44450h. Including linear robot Bettenfeld R15, Euromap, Europaket, various interfaces, various Mouldmaster and core pulls. 1x core pull valve and flat surface nozzle defective. Documentation available. Dsb Ep Det Eu Dlehbokl

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, clamping force: 4,500 kN, screw diameter: 75 mm, clearance between the columns: 800 mm, injection weight: 1,506 g, mold height (min.): 425 mm, opening stroke: 760 mm, TECHNICAL DETAILS Dobovzrn Ds Ep Dhbjkl Control: Unilog B4 Clamping force: 4,500 kN Minimum mold height: 425 mm Maximum mold height: 770 mm Column spacing (H x V): 800 x 800 mm Mounting plates (H x V): 1,155 x 1,195 mm Mold opening stroke: 760 mm Robot interface: Euromap 12 Injection unit Screw diameter: 75 mm Injection weight (PS): 1,506 g Injection volume: 1,657 cm³ Specific injection pressure: 1,739 bar MACHINE DETAILS Machine dimensions (L x W x H): 8.3 x 1.9 x 2.4 m Total weight: 20,400 kg Oil tank capacity: 800 l

Year of construction: 1998, Condition: ready for operation (used), Clamping force: 500kN, screw diameter: 30mm, injection volume: 101cm³, injection weight: 92g, injection pressure: 1488bar, clamping plate dimensions X/Y: 540mm/540mm, distance between tie bars: 321mm, mold opening: 350mm, mold height min./max.: 200mm/550mm, weight: approx. 2300kg. Including 1 hydraulic core puller. Dkjb Ep Dhstw Durobjl

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 500 mm, injection weight: 250 g, opening stroke: 900 mm, Including robot - LR 100 TECHNICAL DETAILS Control: MC 4 with color monitor, integrated control panel and plate station Closing system: Fully hydraulic Screw diameter: 45 mm Suitable for: Thermoplastics Closing unit Dkjbsvzrmgs Ep Dhbjl Closing force: 1,500 kN Clamping plates (H x V): 780 x 790 mm Free space between the columns (H x V): 500 x 500 mm Maximum opening width: 900 mm Injection unit Screw diameter: 45 mm Injection volume: 275 cm³ Injection weight: 250 g Injection pressure: 1,878 bar Electro-hydraulic equipment Pump motor power: 30 kW Heating element power: 16 kW ROBOT - Krauss-Maffei linear robot LR 100 Load capacity: < 10 kg (gripper + drives + parts) Loading side: opposite the operator X-axis (stroke from mold): 550 mm (servo motor) Y-axis (vertical stroke with motor brake): 1,200 mm (servo motor) Z-axis (lateral stroke): 1,500 mm (servo motor) C-axis (folding axis for depositing): 0-90° (pneumatic) Torque (Md): 30 Nm Position measurement: encoder MACHINE DETAILS Net weight (with control cabinet): 7.1 t Machine dimensions (L x W x H): 4.66 x 1.51 x 2.19 m

Year of construction: 2013, Condition: ready for operation (used), Clamping force: 250kN, distance between tie bars: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, screw diameter: 25mm, injection volume: 49cm³, injection weight (PS): 45g, injection pressure: 2000bar, cores: 2+5, heating zones: 12, pump hours: 2388h, automatic operation: 1600h. Including Multilift H with B-axis, clean room module. Dkeb Eetyax Ejp Dhbol

Condition: ready for operation (used), Year of construction: 2008, operating hours: 42,000 h, Functionality: fully functional, machine/vehicle number: 61012448, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, injection weight: 140 g, ejector stroke: 150 mm, opening stroke: 600 mm, TECHNICAL DETAILS Control: MC5 with color monitor, integrated control panel and 3 USB ports Screw diameter: 35 mm Djb Ejvzrkfop Dhbokl Design: Scuff protection for thermoplastics Non-return valve: Yes Nozzle: Open nozzle Clamping unit Mold clamping force: 1,100 kN Mold opening force: 70 kN Mounting plates (H x V): 745 x 770 mm Column spacing (H x V): 470 x 470 mm Mold opening stroke: 600 mm Mold height: 300 mm Plate opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection unit Screw diameter: 35 mm Injection pressure: 2,429 bar Injection volume: 154 cm³ Injection weight (HP): 140 g Screw revolutions (standard/option): 390 / 490 rpm MACHINE DETAILS Working hours: approx. 42,000 h Machine weight (with control cabinet): 5.8 t Machine dimensions (L x W x H): 4.5 x 1.6 x 2.1 m Pump motor power: 18 kW Heating power: 10.97 kW Cylinder heating zones: 5 Drying cycles according to Euromap: 1,850 / h Oil tank capacity: 489 l

Year of construction: 2001, Condition: ready for operation (used), Screw diameter: 30mm, connected load: 42kW, operational hours counter pump/ automatic: 73,384/ 64,491h, with control software version 3.080, an on-site inspection is possible. Dkjborcmx Hj Ep Dhbjl

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 164225, clamping force: 600 kN, screw diameter: 35 mm, clearance between the columns: 450 mm, mold height (min.): 600 mm, plate width: 720 mm, TECHNICAL DETAILS Closure system: Hydraulic Closure force: 600 kN Plate size (table size): 720 mm Distance between the columns: 450 mm Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 kN Injection system Screw diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2,400 bar MACHINE DETAILS Dkeb Ep Dhjvzrhdsbsl Total weight: 5,300 kg

Year of construction: 1999, Condition: ready for operation (used), Clamping force: 2000kN, tie bar distance: 520mm/520mm, platen size: 715mm/715mm, min. installation height: 250mm, max. platen distance: 900mm, max. opening stroke: 650mm, max. ejector stroke: 225mm, max. ejector force: 66kN. Screw diameter: 45mm, injection weight: 240g, injection pressure: 250bar, stroke volume: 254cm³. Machine dimensions X/Y/Z: approx. 6500mm/1700mm/2200mm, weight: approx. 6700kg, control: Selogica 3.090, operating hours: over 100,000h. On-site inspection is possible. Dkjbevnd Txs Ep Dhbol

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 7154 - 0118, clamping force: 800 kN, clearance between the columns: 750 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 600 mm, TECHNICAL DETAILS Control: NC 4 control, DIAS Closing system: Hydraulic Dkjb Ep Djvzrf Nehbol Closing force: 800 kN Distance between columns: 420 mm x 420 mm Plate dimensions: 590 mm x 600 mm Mold size (min.): 250 mm Bar width: 420 mm Maximum opening distance: 500 mm Maximum distance between plates: 750 mm Two-component system Horizontal system: Nitrided screw, diameter 18 mm Vertical system: Bimetallic screw, diameter 25 mm MACHINE DETAILS Motor power: 18.5 kW Heating power: 8.8 kW Machine dimensions (L x W x H): 3.9 m x 1.4 m x 1.9 m Weight: 4,100 kg EQUIPMENT - Two-component injection molding machine with hydraulic closing system - Complete machine history available

Year of construction: 1997, Condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Dkjb Ejrc Hibop Dhbel

Year of construction: 2009, Condition: ready for operation (used), Clamping force: 1000kN, column distance X/Y: 420mm/420mm, mold height min./max.: 200mm/800mm, platen size X/Y: 620mm/620mm. Screw diameter D25/D35: 25mm/35mm, max. injection volume D25/D35: 90cm³/173cm³, max. injection pressure: 2500bar, injection speed: 160mm/s. Including various accessories, including D25 and D35 units. Dimensions X/Y/Z: approx. 4500mm/2200mm/1700mm, weight: approx. 5300kg, control: Arburg Selogica, operating hours: 1798h. Documentation available. Dkjbetthr No Ep Dhbel

Year of construction: 2002, Condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Dkjbsum U S Es Ep Dhbsl

Year of construction: 1999, Condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Djboilhfco Ep Dhbekl

Year of construction: 1999, Condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible. Dob Ejt E Trhop Dhbskl

Year of construction: 2019, Condition: ready for operation (used), Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible. Dob Ep Dherk Rxqsbekl

Year of construction: 2018, Condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Dkeb Ep Dor N Rh Hohbjl

Year of construction: 2016, Condition: ready for operation (used), A total of 9 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible. Dksb Eeugmx Aop Dhbol

Year of construction: 2009, Condition: ready for operation (used), There are 5 identical Engel injection molding machines available. Screw diameter: 2x 30mm/3x 35mm, clamping force: 80t, weight: approx. 4400kg. All machines including attachment crane. One Engel (Fig. 5) serves as a spare parts dispenser for the remaining 4 machines. Documentation available. On-site inspection is possible. Dkjb Ep Deu Afz Dshbel

Year of construction: 2007, Condition: ready for operation (used), Clamping force: 400kN, min. installation height: 200mm, max. drive-up distance: 500mm, barrel diameter: 15mm, max. screw volume: 17cm³, number of core pulls: 2. Deb Epsttbfbs Dhbokl

Year of construction: 1998, Condition: ready for operation (used), Clamping force: 500kN, min. installation height: 200mm, max. drive-up distance: 550mm, barrel diameter: 25mm, max. screw volume: 47cm³, number of core pulls: 2. Available from Q4 2024. Dkeb Epsttbffe Dhbel

Year of construction: 1993, Condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Dkob Ep Dhsvb Hbfebel

Year of construction: 2010, Condition: ready for operation (used), There are 3 injection molding machines Arburg including handling robot Stäubli available. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 96839h. Including robot Stäubli RX130 CS7Bm, year of construction 2000. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 103227h. Including robot Stäubli RX130 CS7B, year of construction 2000. Arburg Allrounder 370S 700-100, year of construction 2010, screw diameter 15mm/20mm/25mm, centering 125mm, control Selogica direct 4.090, operating hours 49833h. Including robot Stäubli RX130 CS7B, year of manufacture 2000, documentation available. On-site inspection is possible. Individual sale possible. Deb Esu St I Rjp Dhbskl