Year of construction: 2019, Condition: ready for operation (used), Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible. Fsb Haz Rjrk Rxqjgspg

Condition: used, Injection molding machine, clamping force controller, control unit -Manufacturer: Demag Kunststofftechnik, closing force control device -Type: DMS-SKR 79/5 . 064 929 65RMS -Dimension: 165/95/H95 mm -Weight: 0.7 kg Fjboldk H As Haz Rgopg

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, clamping force: 2 kN, screw diameter: 50 mm, BILLION 200 T injection molding machine Reference : Hercule H780/200 Year: December 2000 Type of order: DIXIT 500 Screw diameter: 50 mm Febju Iyyxo Haz Rgjpg 8 Mould heating zones 2 hydraulic cores 1 Pneumatic core 1 Blowgun

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 61007465, clamping force: 3,000 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, injection pressure: 1,904 bar, injection weight: 476 g, opening stroke: 820 mm, Including robot - Wittmann W 731 X-axis: 800 mm Y-axis: 1,400 mm Z-axis: 4,000 mm TECHNICAL DETAILS Clamping force: 3,000 kN Mold opening force (max.): 160 kN Moving platen pusher force (opening): 86 kN Moving platen pusher force (closing): 68 kN Mold platen size (H x V): 995 x 1,050 mm Column spacing (H x V): 630 x 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum clear height: 1,150 mm Injection unit Screw diameter: 55 mm L/D ratio: 20 Injection pressure: 1,904 bar Injection volume: 523 cm³ Injection weight (PS): 476 g Injection rate: 428 cm³/s Fjbjvzrp Io Haz Rgspg MACHINE DETAILS Machine dimensions (L x W x H): 5.97 x 2.04 x 2.36 m Total weight: 12.5 t

Condition: excellent (used), Year of construction: 2006, operating hours: 10,542 h, Functionality: fully functional, clamping force: 10 kN, screw diameter: 160 mm, clearance between the columns: 1,090 mm, displacement volume: 14,654 cm³, injection pressure: 1,250 bar, injection weight: 15,970 g, opening stroke: 1,200 mm, plate width: 1,628 mm, plate height: 1,580 mm, total length: 15,300 mm, total width: 3,700 mm, total height: 4,300 mm, overall weight: 63,000 kg, heating capacity: 110 kW (149.56 HP), pump power: 155,000 W, input voltage: 400 V, Equipment: documentation/manual, Closing force: 1000 T Between columns: 1090 x 1090 mm Opening stroke: 1100 mm Mold thickness: 500-1100 mm Screw diameter : 160 mm Injectable volume: 14654 cm3 PVC injectable weight: 15970 gr Injection pressure: 1250 bars Pump power: 45 + 55 +55 kw Oil tank: 3050 L Machine dimensions: 15.3 x 3.7 x 4.3 + DAL MASCHIO robot Machine dismantled, transport by 3 trucks: -20T -22.3T -20.5T Fpeb Holcdk Ejaz Rgjg Charging included

Condition: excellent (used), Year of construction: 2009, operating hours: 70,171 h, Functionality: fully functional, clamping force: 900 kN, screw diameter: 38 mm, displacement volume: 38 cm³, injection pressure: 2.06 bar, ejector force: 40,000 N, ejector stroke: 130 mm, plate length: 680 mm, plate width: 740 mm, total length: 4,400 mm, total width: 1,500 mm, total height: 2,000 mm, overall weight: 6,700 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 800 mm, Equipment: documentation/manual, injection moulding machine ENGEL VICTORY 80-90 tech warehouse no.: 503415 manufacturer: ENGEL type: VICTORY 80-90 tech controller: CC200 year of construction: 2009 operation hours: 70171 h technical data clamping unit clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 500 mm ejector stroke: 130 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 22 mm swept volume: 38 ccm injection pressure: 2060 bar screw length: 19 l/d screw stroke: 100 mm screw speed: 360 min injection rate into the open: 78 g/s PS number of heating zones: 4 nozzle stroke: 230 mm measures & weight measures of machine l x w x h: 4.4m x 1.5m x 2m total weight: 6700KG equipment included screen text german CEE-socket 16A Fpeb Hou T D Egsaz Rgeg core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A mould heating 4x

Year of construction: 2009, Condition: ready for operation (used), There are 5 identical Engel injection molding machines available. Screw diameter: 2x 30mm/3x 35mm, clamping force: 80t, weight: approx. 4400kg. All machines including attachment crane. One Engel (Fig. 5) serves as a spare parts dispenser for the remaining 4 machines. Documentation available. On-site inspection is possible. Fsb Hou Afz Dsaz Rgopg

Condition: used, Microprocessor controller, temperature controller, injection molding machine -Number: 11 control loops -Control connections Fjbsb Uhr So Haz Rgjpg -Weight: 20 kg

Condition: excellent (used), Year of construction: 2019, operating hours: 9,900 h, Functionality: fully functional, Injection molding machine Engel VC200/50 Year of manufacture 2019 / approx. 9900 operating hours Engel control system Fpob Haz Revx T U Tsgjg Total height: approx. 1,800 mm Total length: approx. 3,800 mm Total width: approx. 1,500 mm Total weight approx. 2,900 kg Clamping force 500 KN Screw diameter 30 mm Table ejector stroke 100 mm Injection pressure 200 bar Heating zones 4 10x heating channel / core pull on ejector side Opening stroke max. 400 mm Robot pneumatics Engel ER-USP5 (year of manufacture 2019) Dryer Motan Luxor CA 15

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, clamping force: 4,500 kN, screw diameter: 75 mm, clearance between the columns: 800 mm, injection weight: 1,506 g, mold height (min.): 425 mm, opening stroke: 760 mm, TECHNICAL DETAILS Control: Unilog B4 Clamping force: 4,500 kN Minimum mold height: 425 mm Fob Haz Revzrn Djgopg Maximum mold height: 770 mm Column spacing (H x V): 800 x 800 mm Mounting plates (H x V): 1,155 x 1,195 mm Mold opening stroke: 760 mm Robot interface: Euromap 12 Injection unit Screw diameter: 75 mm Injection weight (PS): 1,506 g Injection volume: 1,657 cm³ Specific injection pressure: 1,739 bar MACHINE DETAILS Machine dimensions (L x W x H): 8.3 x 1.9 x 2.4 m Total weight: 20,400 kg Oil tank capacity: 800 l

Year of construction: 2001, Condition: excellent (used), BI-MATERIAL injection molding machine Main injection group screw diam 70, volume 1212 cm3 Vertical annex injection group, screw diam 35, volume 170 cm3 Hydraulic core : 6 Air blast : 2 Interface robot Accumulator on main injection Mold pressure sensor pre-equipment 32 hot runner control zones Electric motor on main unit screws Automatic tie bar extraction Fjb Hazoiw Ia Se Rgepg Between columns 1025 x 1025 mm (large platens)

Condition: ready for operation (used), Year of construction: 2001, Krauss Maffei KM 5C WIN Grinding force 50 tons Year 2001 Fpeb Hsix N Treaz Rgsg Screw diameter 25mm Injection weight 56 g

Year of construction: 1999, Condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Feb Hazjilhfco Rgepg

Year of construction: 1992, Condition: used, Injection molding machine Fob Haz Reb A H Rnjgopg -Closing force: 25 to -Screw diameter: 22 mm -Control Unilog 2040 -Spar distance: 250x250 mm -Data collection terminal -Parts removal device make ASS -Temperature control device make Single

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 500 mm, injection weight: 250 g, opening stroke: 900 mm, Including robot - LR 100 TECHNICAL DETAILS Control: MC 4 with color monitor, integrated control panel and plate station Closing system: Fully hydraulic Screw diameter: 45 mm Suitable for: Thermoplastics Closing unit Closing force: 1,500 kN Clamping plates (H x V): 780 x 790 mm Fobevzrmgj Haz Rgspg Free space between the columns (H x V): 500 x 500 mm Maximum opening width: 900 mm Injection unit Screw diameter: 45 mm Injection volume: 275 cm³ Injection weight: 250 g Injection pressure: 1,878 bar Electro-hydraulic equipment Pump motor power: 30 kW Heating element power: 16 kW ROBOT - Krauss-Maffei linear robot LR 100 Load capacity: < 10 kg (gripper + drives + parts) Loading side: opposite the operator X-axis (stroke from mold): 550 mm (servo motor) Y-axis (vertical stroke with motor brake): 1,200 mm (servo motor) Z-axis (lateral stroke): 1,500 mm (servo motor) C-axis (folding axis for depositing): 0-90° (pneumatic) Torque (Md): 30 Nm Position measurement: encoder MACHINE DETAILS Net weight (with control cabinet): 7.1 t Machine dimensions (L x W x H): 4.66 x 1.51 x 2.19 m

Condition: good (used), Year of construction: 1999, Engel ES 7 K Closing 1000 tons Year 1999 Scrow 105 mm Displacement 4160 cm3 Number of heating zones including nozzle 7 Pump drive power 130 KW Clamping force 1100 tons Opening stroke 1100 Tool installation height min-max Bar spacing 1400x1150 Fpjb Hajlyr Awez Rgeg Machine softened 64 tons + 18 tons

Year of construction: 2018, Condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Fsbsr N Rh Ho Haz Rgopg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 42,000 h, Functionality: fully functional, machine/vehicle number: 61012448, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, injection weight: 140 g, ejector stroke: 150 mm, opening stroke: 600 mm, TECHNICAL DETAILS Control: MC5 with color monitor, integrated control panel and 3 USB ports Screw diameter: 35 mm Design: Scuff protection for thermoplastics Non-return valve: Yes Nozzle: Open nozzle Clamping unit Mold clamping force: 1,100 kN Mold opening force: 70 kN Mounting plates (H x V): 745 x 770 mm Column spacing (H x V): 470 x 470 mm Mold opening stroke: 600 mm Mold height: 300 mm Plate opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection unit Screw diameter: 35 mm Injection pressure: 2,429 bar Injection volume: 154 cm³ Injection weight (HP): 140 g Screw revolutions (standard/option): 390 / 490 rpm MACHINE DETAILS Working hours: approx. 42,000 h Machine weight (with control cabinet): 5.8 t Machine dimensions (L x W x H): 4.5 x 1.6 x 2.1 m Feb Haz Rsvzrkfsgspg Pump motor power: 18 kW Heating power: 10.97 kW Cylinder heating zones: 5 Drying cycles according to Euromap: 1,850 / h Oil tank capacity: 489 l

Year of construction: 2016, Condition: ready for operation (used), A total of 9 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible. Fobeugmx Aj Haz Rgjpg

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 164225, clamping force: 600 kN, screw diameter: 35 mm, clearance between the columns: 450 mm, mold height (min.): 600 mm, plate width: 720 mm, TECHNICAL DETAILS Closure system: Hydraulic Closure force: 600 kN Plate size (table size): 720 mm Distance between the columns: 450 mm Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 kN Fsb Hevzrhdsaz Rgopg Injection system Screw diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2,400 bar MACHINE DETAILS Total weight: 5,300 kg

Year of construction: 1998, Condition: ready for operation (used), Clamping force: 500kN, min. installation height: 200mm, max. drive-up distance: 550mm, barrel diameter: 25mm, max. screw volume: 47cm³, number of core pulls: 2. Available from Q4 2024. Fpsbsttbffj Haz Rgog

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 7154 - 0118, clamping force: 800 kN, clearance between the columns: 750 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 600 mm, TECHNICAL DETAILS Control: NC 4 control, DIAS Closing system: Hydraulic Closing force: 800 kN Distance between columns: 420 mm x 420 mm Plate dimensions: 590 mm x 600 mm Mold size (min.): 250 mm Bar width: 420 mm Maximum opening distance: 500 mm Maximum distance between plates: 750 mm Two-component system Horizontal system: Nitrided screw, diameter 18 mm Vertical system: Bimetallic screw, diameter 25 mm MACHINE DETAILS Motor power: 18.5 kW Heating power: 8.8 kW Machine dimensions (L x W x H): 3.9 m x 1.4 m x 1.9 m Weight: 4,100 kg EQUIPMENT - Two-component injection molding machine with hydraulic closing system - Complete machine history available Fpjbevzrf Ns Haz Rgsg

Year of construction: 2007, Condition: ready for operation (used), Clamping force: 400kN, min. installation height: 200mm, max. drive-up distance: 500mm, barrel diameter: 15mm, max. screw volume: 17cm³, number of core pulls: 2. Fpebottbfbj Haz Rgog

Year of construction: 2010, Condition: ready for operation (used), There are 3 injection molding machines Arburg including handling robot Stäubli available. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 96839h. Including robot Stäubli RX130 CS7Bm, year of construction 2000. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 103227h. Including robot Stäubli RX130 CS7B, year of construction 2000. Arburg Allrounder 370S 700-100, year of construction 2010, screw diameter 15mm/20mm/25mm, centering 125mm, control Selogica direct 4.090, operating hours 49833h. Including robot Stäubli RX130 CS7B, year of manufacture 2000, documentation available. On-site inspection is possible. Individual sale possible. Fpobeu St I Ro Haz Rgjg

Year of construction: 1993, Condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Fobovb Hbfs Haz Rgspg