Condition: like new (used), Year of construction: 2019, Krauss Maffei Injection Molding Line with Injection Molding Machine, Model 110/750 CX with Digicolor Drying Station, Model DW 25/40 (serial 191511221); Krauss Maffei handling unit, Model LRX 100 (serial 2118836); Keyence Deutschland GmbH Discharge Blower, Model SJ-FW; and associated belt conveyors. Dksb Eomn S Efet Sw Eol

Condition: excellent (used), Year of construction: 2004, Battenfeld HM 2700 / 1330 injection molding machine Year of production - 2004 Control - Unilog B4 Closing system : Closing force : 2.700 kN Mold platen size (h x v): 1030 mm x 1020 mm Distance between columns (h x v): 710 mm x 630 mm Mould opening stroke: 800 mm Min. mold height: 350 mm Maximum mold height: --- mm Max. daylight: 1150 mm Hydraulic ejector - stroke: 200 mm Ejector force forward/backward: 59 kN Injection system : Screw diameter: 55 mm Ls/D ratio: 22 Injection pressure: 2041 bar Sweep volume: 653 ccm Injection weight, PS: 594 g Injection stroke: 400 mm Screw speed: 318 1/min Maximum plasticization rate: 59.3 g/sec. Nozzle pressure: 100 kN Electrical and hydraulic equipment Installed heating power: 18.2 kW Adjustable drum heating zones: 1+4 Oil tank capacity - 650 l Dkeb Et Swovt Ruto Eol Dimensions and weight Total machine weight: 12,000 kg Dimensions (L x W x H) 5.6 x 1.8 x 2.2 m

Condition: used, Year of construction: 1998, Spritzgießmaschine, Fabr. Stork, Typ SX-N 6600-5600, Bj 1998, SN X66503, Schließkraft 6.600 kN, Holmabstand horizontal/vertikal 900/900 mm, Aufspannplatte horizontal/vertikal 1.350/4.440 mm, Formeinbauhöhe max./min. 900/300 mm, Formöffnungsweg 940 mm, Werkzeuggesamtgewicht max. 8.600 kg, Zentrierung DS/AS 200/125 mm, Traversengewinde M20, Spritzdruck 21.000 N/cm², Spritzvolumen 2.494 cm³, Schnecken-Ø 84 mm, Kaskade 4-fach, Kernzüge FAP/BAP 2/1, Heizkreise Ma/PSG 8/0, Anschlussleistung 330 kW, Maschinengewicht 34.300 kg, Steuerung, Fabr. Stork, Type CDS500, Linear-Entnahmeroboter, Fabr. Engel, Type ERC 84/1-E, Bj. 2003, SN 97607 Dob Et Ssuw Uqdsw Eokl

Condition: good (used), Year of construction: 2014, complete plastic factory Djb Et Ssvlmi Rsw Eokl

Year of construction: 2002, Condition: excellent (used), Model: ES 750H330W/250 HL-2F Year : -99 Dsb Esiv Swxot Sw Eekl

Condition: good (used), Year of construction: 1998, Clamping force: 800 kN, Screw diameter: 40 mm, Stroke volume: 204 cm³, Injection volume: 131 cm³/s, Screw speed: 310 1/min, Plasticizing capacity max.29 g/s, Nozzle pressure: 84 kN, Nominal power of pump motor: 15 kW, Installed heating power: 12 kW, Adjustable barrel heating zones: 5, Drying cycle rate: 2000 1/h, Tank capacity: 270 ltr, Machine dimensions approx.: 4.10 m x 1.40 m x 2.02 m, Total weight of machine: 3500 kg, Weight of mold: 860 kg Dkeb Et Sweuc Szze Esl

Year of construction: 2005, Condition: good (used), Demag Injection Moulding Machine Type: 200/580-840 Extra with robot Control: NC 4 Year: 2005 Clamping unit Clamping force t: Dksbolpad Sj Et Sw Ejl 200 Opening stroke mm: 575 Distance between tie bars mm: 580x580 Installation height min/max mm: 340/690 Mould fixing platen size h x v: 860x860 Injection unit Screw size mm: 50 Injection shot weight in Polysterol gr: 400 Injection volume cm³: 442 Injection pressure increased bar: 1946 Size and weight Dimension HxWxD m: 5.4x1.7x2.1 Total weight Kg: 8200 Additional information Robot Kerzüge 1

Condition: ready for operation (used), Year of construction: 2006, operating hours: 60,000 h, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 101 cm³, Stock-No. 14036 Manufacturer Krauss Maffei Type of machine KM 80 – 180 EX Year 2006 Working hours 60000 Controlversion MC 5 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 800 kN Size of mould platens (h x v) 640 x 640 mm Distance between tie bars (h x v) 420 x 420 mm Mould opening stroke 320 mm Dksb Et Swsucwc Re Eol Mould height min/max 150 / 430 mm Max. daylight 750 mm Hydraulic ejector - stroke 100 mm Ejector force 22 kN Injection unit: Screw diameter 35 mm Ls/D ratio 20 Injection pressure 1488 bar Stroke volume 101 ccm Shot weight (PS) 91,9 gr. Injection rate 289 ccm/s Screw speed 477 1/min Plasticising rate max. 24,4 g/s Nozzle pressure 30 kN Electric and Hydraulic Equipment: Installed heating capacity 8,1 kW Adjustable barrel heating zones 5 Dimensions and weights: Dimensions of the machine ca. 5,00 x 1,50 x 2,00 m Total machine weight 6400 kg Max. mould weight 995 kg Accessories: - Anti vibration pads Additional Options: - 10 x hot runner controller - 1 x air valve - Robot interface according to Euromap 67

Condition: used, Year of construction: 2002, Spritzgießmaschine, Fabr. Engel, Typ Duo 7050/1000, Bj 2002, SN 46387, Schließkraft 10.000 kN, Holmabstand horizontal/vertikal 1.400/1.150 mm, Aufspannplatte horizontal/vertikal 2.000/1.830 mm, Formeinbauhöhe max./min. 1,200/400 mm, Formöffnungsweg 1,800 mm, Werkzeuggesamtgewicht max. 18.000 kg, Zentrierung DS/AS 250/250 mm, Traversengewinde M24, Spritzdruck 16.500 N/cm², Spritzvolumen 4.160 cm³, Schnecken-Ø 120 mm, Kaskade 12-fach, Kernzüge FAP/BAP 0/2, Heizkreise Na/PSG 16/60, Anschlussleistung 340 kW, Maschinengewicht 65.000 kg, abgel. Betriebsstd. 04.101, Linear-Entnahmeroboter, Fabr. Engel, Type ERC A4/XXX, Bj. 2002, SN 11245, Schutzumhausung, integr. Werkzeugkühlsystem, Fabr. Oni, Type Rhytemper Dobeuxcd Ij Et Sw Eekl

Condition: excellent (used), Year of construction: 2010, Clamping force: 3200 t Tie bar distance: 2240x1800 mm Mould height min/max: 600-2000mm Platen size HxV: 3020x2680mm Max mould weight: 81000kg Screw dia: 215mm Injection volume: 38120 cm3 Dksb Et Sweu N Tg Uo Eel For more information contact us.

Condition: excellent (used), Year of construction: 2003, operating hours: 27,900 h, Functionality: fully functional, clamping force: 1 kN, screw diameter: 32 mm, Type: HL120 RS35/32 Year : 2003 Auger ø 32 mm Dksb Esu E Unfot Sw Esl Hours: 27.900 h

Year of construction: 2006, Condition: good (used), Krauss Maffei Injection Moulding Machine Type: KM 650 5000 CM\2 with robot Control: MC4 Year: 2006 Clamping unit Clamping force t: 650 Opening stroke mm: 1750 Distance between tie bars mm: 1000x929 Installation height min/max mm: 650/1150 Dkobslpafts Et Sw Esl Mould fixing platen size h x v: 1490x1440 Injection unit Screw size mm: 100 Injection shot weight in Polysterol gr: 3200 Injection volume cm³: 3334 Additional information 6 F. Kaskade Kernzüge 2

Condition: ready for operation (used), Year of construction: 2006, operating hours: 54,535 h, Functionality: fully functional, clamping force: 3 kN, screw diameter: 45 mm, displacement volume: 305 cm³, Stock-No. 13973 Manufacturer Krauss Maffei Type of machine KM 300 – 1000 C1 Year 2006 Working hours 54535 h Controlversion MC 4 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 3000 kN Djb Et Swoucc Avs Ejkl Mould opening force, max. 160 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58 kN Injection unit: Screw diameter 45 mm Ls/D ratio 22 Injection pressure 2336 bar Stroke volume 305 ccm Shot weight (PS) 278 gr. Injection rate 200 ccm/s Screw speed 342 1/min Plasticising rate max. 37 g/s Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 19 kW Adjustable barrel heating zones 5 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,20 x 2,20 x 2,40 m Total machine weight 14370 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR 150 X: 900 mm Y: 1400 mm Z: 2500 mm C: 90 ° Additional Options: - 1 x air valve - 2 x core pulls - 16 x hotrunner controllers

Condition: like new (used), Year of construction: 2010, operating hours: 8,300 h, Functionality: fully functional, screw diameter: 14 mm, Autonomous injection unit Make: Ferromatik Milacron Type: SE -55 Dkob Etst Dzz Us Sw Eol Screw: 14 mm Operating hours: 8 300h Year: 2010 Separate control cabinet with control and servo amplifier and a control terminal with 10.4 inch touch screen. The self-contained injection unit gives you an easy introduction to multi-component technology. It is fully electric and energy efficient. + Quick retrofit for almost any machine + Increased machine flexibility depending on production requirements

Year of construction: 2004, Condition: excellent (used), Krauss Maffei Injection Moulding Machine Type: KM 2300/12000 MC Control: MC 4 Year: 2004 Clamping unit Dob Et Swopvi T Nj Eskl Clamping force t: 2300 Opening stroke mm: 3700 Distance between tie bars mm: 2000 x 1600 Installation height min/max mm: 1100/1800 Mould fixing platen size h x v: 2830 x 2400 Injection unit Screw size mm: 105 Injection shot weight in Polysterol gr: 4727 Injection volume cm³: 5195 Injection pressure increased bar: 2296 Size and weight Dimension HxWxD m: 14.2 x 4.15 x 2.84 Total weight Kg: 143.000 Additional information Robot System Kernzüge Heizkanalregler

Condition: ready for operation (used), Year of construction: 2006, operating hours: 43,485 h, Functionality: fully functional, clamping force: 2 kN, screw diameter: 45 mm, displacement volume: 305 cm³, Stock-No. 13972 Manufacturer Krauss Maffei Type of machine KM 200 – 700 C1 Year 2006 Controlversion MC 4 Screentext German Working hours 43000 h Clamping unit: Clamping force 2000 kN Mould opening force, max. 101 kN Travel force movable platen opening 50 kN Travel force movable platen closing 42 kN Size of mould platens (h x v) 915 x 915 mm Distance between tie bars (h x v) 560 x 560 mm Mould opening stroke 700 mm Mould height min 350 mm Max. daylight 1050 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 45 mm Ls/D ratio 22 Injection pressure 2336 bar Stroke volume 305 ccm Shot weight (PS) 278 gr. Injection rate 200 ccm/s Screw speed 342 1/min Plasticising rate max. 37 g/s Nozzle pressure 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 30 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,20 x 2,30 m Total machine weight 10.530 kg Max. mould weight 2535 kg Accessories: - Anti vibration pads - 4-fold water flower - Conveyor 2000 x 500 x 1000 mm - Krauss Maffei Robot LR100 X: 550 mm Servo Y: 1200 mm Servo Z: 2500 mm Servo C: 0 - 90° pneumatic Dkjb Etouccyuo Sw Esl Additional Options: - 1 x air valve - 16 x hot runner controller - 2 x hydr. core pull - 4 x pneumatic sequentional valve

Condition: good (used), Year of construction: 1998, operating hours: 83,000 h, screw diameter: 50 mm, overall weight: 7,400 kg, Demag 150 tons Auger diameter: 50 mm Impact volume: 399 cc Shot weight: 360 g Opening path max: 500 mm Mold height min: 250 mm Mold height max: 560 mm (660 with WA) Max. distance between moldboards: 1060 mm (1160 with WA) Dob Est Dx Hbst Sw Ejkl Mold table size H*V: 750*750 mm Distance between tie bars H*V: 500*500 mm Max. tool weight: 1700 kg

Year of construction: 2006, Condition: good (used), Krauss Maffei Injection Moulding Machine Type: KM 800-12000 MX with Robot Control: MC4 Year: 2006 Clamping unit Clamping force t: 800 Opening stroke mm: 2100 Distance between tie bars mm: 1120 x 1000 Installation height min/max mm: 1100 Mould fixing platen size h x v: 1600x1530 Injection unit Screw size mm: 135 Injection shot weight in Polysterol gr: 7800 Injection volume cm³: 8588 Size and weight Total weight Kg: Dkjbelpagfs Et Sw Esl 50000/13000 Additional information HK-Regel-stellen 24 LR 500 Robot Nadel-verschluss pnma./hydr.4 F. Kaskade HK-Regel-stellen 12 Kernzüge 3

Condition: ready for operation (used), Year of construction: 2003, Stock-No. 13439 Manufacturer Krauss Maffei Type of machine KM 150 – 700 - 160 CZ Year 2003 Working hours h Controlversion MC 4 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 1500 kN Mould opening force, max. 86 kN Travel force movable platen opening 45 kN Travel force movable platen closing 34 kN Size of mould platens (h x v) 780 x 790 mm Distance between tie bars (h x v) 500 x 500 mm Mould opening stroke 600 mm Mould height min 400 mm Max. daylight 1000 mm Hydraulic ejector - stroke 150 mm Ejector force 22/10 kN Injection unit: Screw diameter 50 / 25 mm Ls/D ratio 20 / 26 Injection pressure 1892 / 2500 bar Stroke volume 377 / 52 ccm Shot weight (PS) 343 / 47 gr. Injection rate 181 / 63 ccm/s Screw speed 255 / 367 1/min Plasticising rate max. 24 / 9 g/s Nozzle pressure 84 / 67 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 30 kW Installed heating capacity 22 kW Adjustable barrel heating zones 5 Oil Reservoir capacity 345 ltr. Dimensions and weights: Dimensions of the machine ca. 5,00 x 2,00 x 2,20 m Total machine weight 8200 kg Max. mould weight 1650 kg Accessories: - Anti vibration pads - 2 x 6-zone water battery - rotary table D: 610 mm Additional Options: - injection molding machine equiped with 2 x core pulls on movable plate - 1 x Air valve Djb Et Swsub S T Is Eokl - Robot interface according to Euromap 12 - 16 x hot runner controller - Accumulator

Condition: good (used), Year of construction: 1995, operating hours: 44,283 h, Functionality: fully functional, screw diameter: 30 mm, displacement volume: 98 cm³, injection weight: 88 g, overall weight: 5,300 kg, Angel 90 tons Incl. robot (ASS) Production in clean room. Dkeb Est Dxqtjt Sw Ejl

Year of construction: 2000, Condition: good (used), Krauss Maffei Injection Moulding Machine Type: KM 200-700C1 Control: MC4 Year: 2000 Clamping unit Clamping force t: 200 Opening stroke mm: 1050 Distance between tie bars mm: 560x560 Installation height min/max mm: 350 Mould fixing platen size h x v: 915x915 Injection unit Screw size mm: 50 Injection pressure increased bar: 1892 Size and weight Dimension HxWxD m: 5,50 x 2,20 x 2,30 Total weight Kg: 10530 Additional information - Kernzug 2-Fach Hydraulisch - Werkzeugdüsensteuerung Pneumatisch - Werkzeugheizung 8 Regelkreise - 2mal WZ-Temperaturüberwachung - 4-Fach Kistler Ladungsverstärker - Ausblasventil Dkob Etslpapkj Sw Ejl

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Dkob Et Sjub S R Hsw Eol Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: used, Year of construction: 1996, operating hours: 54,800 h, Functionality: fully functional, clamping force: 250 kN, screw diameter: 25 mm, overall weight: 2,900 kg, Engel 25 tons incl. Engel picking robot Dkobst Dw Ike Et Sw Eel Max opening distance: 248mm Max ejection distance: 100mm Distance between tie bars: Tie bar free Mold table size: W 550mm H 430 mm Mold ring size: 100mm Water battery: 4 channels, Also sits cooling block with 4 channels. Core features: Program available. No sockets Socket for color doser: Yes Interface: Only for Engel's own picking robot. Hot runner control: No Electrical outlets on machine: 3 single phase. 4 x 3-phase.

Condition: excellent (used), Injection Molding machine Deb Et Sshgg R Isw Eekl

Condition: good (used), Year of construction: 2009, Sumitomo Demag Elexis S 350-2300, year of construction 2009 Dsb Esryvrust Sw Eokl