Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC) Dcobvrteud N Hdoi Rog  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: refurbished (used), Year of construction: 2002, Functionality: fully functional, clamping force: 10,000 kN, screw diameter: 95 mm, injection pressure: 1.795 bar, injection weight: 3,064 g, ejector stroke: 250 mm, opening stroke: 2,400 mm, TECHNICAL DATA Control unit: MC6 Injection force: 10000 kN Distance between the columns (H x V): 1400 x 1120 mm Distance of mold opening: 1700 mm Mold installation height: 700 - 1200 mm Opening stroke of the clamping platen: 2400 mm Ejector stroke: 250 mm Ejector force: 226 kN (reverse: kN 59) Screw diameter: 95 mm Ratio L/D: 23 Injection pressure: 1795 bar Injection volume: 3367 cm³ Dcobvrtjufhx Uoi Reg Injection size for PS: 3064 g Injection capacity: 690 cm³/s Closing force of the nozzle: 166 kN MACHINE DETAILS Connected load pumps: 90 kW Heating capacity: 61 kW Net weight: 65 tons Machine dimensions (L x W x H): 10.98 x 3.29 x 2.49 m

Condition: ready for operation (used), Year of construction: 2004, Arburg thermolift 100-2 Tank capacity : 200 l Voltage: 400V Dcobvrevi Iqqsti Rog Heating : 4.5 kW Blower : 1.68 kW Power : 6.2 kW

Condition: as good as new (ex-display), Year of construction: 2023, Krauss Maffeii KM 120-380 PX injection molding machine Year of production : 2023 All-electric machine Five-point double lever-knee closing unit mechanism (three-plate unit) with servo-electric drive. Injection unit with servo-electric drive for injection and plasticization and servo-hydraulic drive for movement of the entire injection unit. MC6 industrial computer-based real-time Ethernet control system Plasticizing system Complete plasticizing system for thermoplastics with HPS-M screw with a diameter of 40mm Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE Closing unit - Mold closing force: kN1200 - Opening force of mold: kN 180 Dcsbvovgdumjrti Rsg - Dimensions of the clamping plate (h x v):mm 640 x 590 - Clearance between columns (h x v):mm 470 x 420 - Mold opening stroke: mm 400 - Mold height min.- max. with option 45,468:mm 180 - 550 - Opening width with option 45.468: mm 950 - Ejector stroke: mm 175 - Forward/reverse ejector force: kN 22 / 10 - Ejector speed:mm/s 350 Injection unit - Auger diameter:mm 40 - Ls/D ratio: - 20 - Injection pressure:bar 1860 - Injection volume:cm3 201 - Injection weight:1): g 183 - Injection speed: mm/s 125 - Injection capacity: cm3/s 157 - Screw speed: 1/min 334 - Plasticizing capacity 1): g/s 24.7 - Torque: Nm 337 - Nozzle pressure force: kN 34 Electrical parameters - Connection value:kW 13.8 - Protection: A 63 - Installed heater power: kW 11,5 - Number of cylinder heating zones: - 5 - Dry cycle time / stroke according to Euromap 6 2):s/mm 1.5 / 329 - Oil tank capacity: dm3 120 Weight and dimensions - Net weight with control cabinet: t 6.9 - Dimensions of the machine (L x W x H) 3): m 5.3 x 1.60 x 1.88

Condition: excellent (used), Year of construction: 2006, operating hours: 56,700 h, Functionality: fully functional, screw diameter: 85 mm, injection pressure: 2,110 bar, injection weight: 2,195 g, Machine type: Battenfeld injection molding machine HM 500/5100 Year of manufacture: 2006 Working hours: 56.700 Control system: Unilog B6 Injection system Screw diameter: 85 mm Specific injection pressure: 2,110 bar Injection volume: 2,412 cm³ Injection weight: 2,195 g Clamping system Clamping force: 500 t Mold platen dimensions: 1,470 mm x 1,260 mm Free space between the columns: 900 mm x 720 mm Height of the molds: 450 mm Opening stroke: 1,150 mm Max. Distance between the plates: 1,600 mm Stroke of the ejector: 250 mm Electrical power Power of the pump motor: 75 kW Output of the cylinder heating band: 37.3 kW Instrumentation EUROMAP 67 Robot connection 1 x hydraulic core on fixed plate 1 x hydraulic core on moving platen 8 x hot runner control Dsbvrsu Dawvsti Rscg Bimetallic injection system Ejector plate General data Dimensions: 6.9 x 2.4 x 3 m Weight: 26,000 kg

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100 Dcebvsud H Dmorti Rog  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Year of construction: 2010, Condition: excellent (used), Krauss Maffei KM 180 - 750 AX injection molding machine Fully electric machine Year of manufacture -2010 Replaced new plastification system motor Dcebven Atnderti Rsg MC5 control system with color monitor, integrated control panel and built-in disk station. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 50 mm TECHNICAL DATA Closing unit - Closing force of the mold: kN 1760 - Clamping plate dimensions (h x v): mm 790 x 740 - Clearance between columns (h x v): mm 560 x 510 - Mold opening path max: mm 450 - Mold installation height min/max: mm 200/600 - Plate opening stroke: mm 1050 - Ejector stroke: mm 130 - Ejector force: kN 49 Injection unit - Auger diameter: mm 50 - Ls/D ratio: 20,2 - Injection pressure: bar 1892 - Injection volume: cm3 393 - Injection weight for PS: g 357 - Injection capacity: cm3/s 314 - Screw speed, max: rpm 320 - Nozzle clamping force: kN 29,4 Electrical parameters - Connection value: kW 38 - Heater power: kW 15,6 - Number of cylinder heating zones: - 5 - Dry cycle time according to Euromap 6: 1/h 2000 - Dry cycle time according to Euromap 6: s 1.8 Weight and dimensions - Net weight with control cabinet: t 6.5 - Machine dimensions (L x W x H): m 6.07 x 1.92 x 2.01

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, clamping force: 10 kN, screw diameter: 120 mm, injection pressure: 1.65 bar, injection weight: 4,936 g, TECHNICAL DETAILS Machine type: Injection molding machine Engel ES 7050/1000 DUO Year of manufacture: 2002 Robot: Engel ERC83/1-E Clamping unit Clamping force: 10,000 kN Dimensions of the clamping plate (h x v): 2,000 mm x 1,830 mm Free space between the columns (h x v): 1,400 mm x 1,150 mm Minimum/maximum mold height: 400 - 1,200 mm Maximum opening width: 1,800 mm Injection unit Screw diameter: 120 mm Dsbvrteu Dav Ssi Rscg Injection volume: 5,430 cm³ Injection size: 4,936 g Injection pressure: 1,650 bar Dimensions and weight Net weight with control cabinet: 65 t

Condition: refurbished (used), Year of construction: 2002, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL Djbvrenh Rhveti Rocg - MC6 TECHNICAL DATA CLAMPING UNIT - injection force: kN 10000 - distance between columns (h x v): mm 1400 x 1120 - distance of mold opening max: mm 1700 - mold installation height min/max: mm 700/1200 - opening stroke of the clamping platen: mm 2400 - Ejector stroke: mm 250 - Ejector force: kN 226 ( Backward: 59 ) SCREW UNIT - Screw diameter: mm 95 - Ratio Ls/D: 23 - Injection pressure: bar 1795 - Injection volume: cm3 3367 - Injection size for PS: g 3064 - Injection capacity: cm3/s 690 - Closing force of the nozzle: kN 166 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 61 WEIGHT AND DIMENSIONS - net weight: t 65 - dimensions of the machine (L x W x H): m 10,98 x 3,29 x 2,49 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Condition: good (used), Year of construction: 2003, Engel ES 1350/250 HL injection molding machine Year of manufacture - 2003 Control - EC 100 Clamping force: 250 tons Injection weight (max): 662 g Plate size (H): 1050 mm Plate size (V): 650 mm Auger diameter : 60 mm Injection volume : 753 ccm Mold height (min): 350 mm Daylight between plates (max) : 1200 mm Opening stroke (max) : 850 mm Ejector stroke: 200 mm Number of cores: 2 Injection pressure: 1480 bar Heating zones: 8 Dobvsvfuadsrti Rjcg Oil tank capacity: 790 l

Condition: excellent (used), Year of construction: 2020, operating hours: 9,900 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 25 mm, injection pressure: 2.025 bar, ejector force: 22 N, ejector stroke: 150 mm, TECHNICAL DETAILS Closing force of the mold: 800 kN Mold opening force: 120 kN Clamping platen dimensions (h x v): 640 x 590 mm Clearance between the columns (h x v): 485 x 435 mm Opening stroke of the mold: 350 mm Mold height: 150 - 400 mm Opening width: 750 mm Ejector stroke: 150 mm Ejector force forwards/backwards: 22 / 10 kN Ejector speed: 350 mm/s Injection unit Screw diameter: 25 mm Ratio Ls/D: 20 Injection pressure: 2.025 bar Injection volume: 49 cm³ Injection weight: 45 g Injection speed: 125 mm/s Injection capacity: 61 cm³/s Screw speed: 382 1/min Plasticizing capacity: 7.8 g/s Torque: 89 Nm Thrust of the nozzle: 21 kN MACHINE DETAILS Net weight with control cabinet: 5.9 t Machine dimensions (L x W x H): 4.80 x 1.60 x 1.88 m Connected load: 6.1 kW Fuse rating: 63 A Installed heating capacity: 6.3 kW Number of cylinder heating zones: 4 Drying time / stroke according to Euromap 6: 1.5 s / 340 mm Oil tank capacity: 120 dm³ Dsbvrsul Uihoti Rscg EQUIPMENT - Five-point double-lever toggle clamping unit mechanism (three-platen unit) with servo-electric drive - Injection unit with servo-electric drive for injection and plasticizing as well as servo-hydraulic drive for moving the entire injection unit - MC6 control system based on an industrial PC with real-time Ethernet technology - Plasticizing system with a screw diameter of 25 mm, nozzle radius 10 mm, nozzle opening 4 mm

Condition: excellent (used), Year of construction: 2005, Injection molding machine Arburg 570C 2200-1300 Year of manufacture : 2005 Control : Selogica Injection system : Screw diameter : 60 mm Injection weight: 558 g Injection pressure: 2000 bar Injection volume : 664 ccm Closing system : Closing force : 220 tons Distance between columns: 570x570 mm Size of clamping plates: 795x795 mm Ejector : hydraulic Clamping unit: hydraulic Additional equipment: Hybrid machine: fast, energy efficient Dcjbvrtsvft D Uei Rsg Euromap 67 Hydraulic core pulling x 2 Injection system - bimetal Dimensions: Weight: 9300 kg Length/Width/Height: 6.16x1.91x2.39 m

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, clamping force: 4,200 kN, screw diameter: 60 mm, injection pressure: 2.42 bar, ejector force: 95 N, ejector stroke: 250 mm, plate length: 1,230 mm, plate width: 1,270 mm, TECHNICAL DETAILS Closing force of the mold: 4,200 kN Mold opening force: 250 kN Dimensions of the clamping platen (hxv): 1,270 x 1,230 mm Distance between the standard columns (hxv): 800 x 800 mm Distance of the mold opening: max. 1,020 mm Formwork height: min. 580 mm (380 mm standard + 200 mm extended - ZE45.462) Panel opening stroke: max. 1,600 mm (1,400 mm standard + 200 mm extended - ZE45.462) Ejector stroke: 250 mm Ejection force forwards/backwards: 95 kN / 49 kN Injection unit Screw diameter: 60 mm Ratio Ls/D: 23.3 Injection pressure: 2,420 bar Injection volume: 792 cm³ Injection weight: 720 g Injection speed: 130 mm/s Injection speed: 368 cm³/s Screw speed: 285 rpm Plasticizing capacity: 72.2 g/s at standard screw speed Thrust force of the nozzle: 82 kN Pump motor power: 75 kW Installed heating power: 29 kW Number of cylinder heating zones: 6 (+1 extended nozzle ZE33.00) Drying time / stroke according to Euromap 6: 3.0 s / 560 mm Required oil volume: 1,000 dm³ MACHINE DETAILS Net weight with control cabinet: 21.5 t Machine dimensions (L x W x H): 6.90 x 2.49 x 2.38 m Maximum tool weight: 6,700 kg Dcebvrjul Ug Hsti Rjg EQUIPMENT - Fully hydraulic clamping system - MC 5 control system with color monitor, integrated control panel and integrated platen station - Plasticizing system SP 2000 - Complete plasticizing system for thermoplastics with 60 mm screw diameter, non-return valve and open nozzle, nozzle radius 15 mm, nozzle opening 6 mm

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 800 - 12000 MX injection molding machine Year of manufacture - 2007 Closing system : - Mould closing force: kN 8000 - Opening force of the mold: kN 560 - Clamping plate dimensions (h x v): mm 1600 x 1530 - Clearance between columns (h x v): mm 1120 x 1000 - Mold opening path: mm 1600 - Mold installation height (min - max): mm 500-1100 - Plate opening stroke: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200/100 Injection system : - Screw diameter: mm 135 - Injection pressure: bar 1389 Dcobvrtiovcpdrs Rjg - Injection volume: cm3 8588 - Injection weight for PS: g 6098 - Screw speed, standard/optional: rpm 121/153 - Injection capacity (standard) Electric-hydraulic equipment - Pump motor power rating: kW 110 - Installed heater power: kW 57 - Number of cylinder heating zones: - 7 - Number of dry cycles according to Euromap: 1/h 965 - Oil tank capacity: l 1500 Dimensions and weight - Net weight with control cabinet: t 45 - Machine dimensions (L x W x H): m 10.81 x 2.92 x 2.51

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 90 mm, opening stroke: 1,800 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Clearance between the columns (hxv): 1,025 mm x 930 mm Mold height: min. 450 mm Mold height: max. 950 mm Opening width: max. 1,800 mm Screw diameter: 90 mm (barrier) Injection volume: 2,480 cm³ Injection quantity: 2,254 g Rated power of the pump motor: 55 kW Heater output: 62 kW Tank capacity: 1,000 l Pneumatic cascades: 4 pieces Dobveul Ubwerti Rscg EQUIPMENT - Engel ERC robot

Condition: excellent (used), Year of construction: 2007, TOSHIBA IS650GTW injection molding machine Year : 2007 Screw diameter : 95mm Injection weight : 2900 g Injection volume : 3150 ccm Short circuit force : 650ton Column spacing : 1080 x 1080mm Plate size : 1530 x 1530mm Opening path (Max. Distance): 1800mm Opening path (Min. Distance): 450 / 900mm Machine Weight: 30ton Dobvsi Dbtrerti Recg Machine size: 7.9 x 2.5 x 2.2m Core function : 5 Core Function Pneumatic drive : yes Hydraulic clamping function : yes Machine Dimensions (LxWxH): 7.9m x 2.5m x 2.2m Machine weight : 30 tons

Year of construction: 2023, Condition: as good as new (ex-display), Krauss Maffei KM 50 - 100 PX injection moulding machine Year of manufacture - 2023 Closing unit 5-point clamping unit with double switch (3 plates), with electric servo drive. Injection unit with electric servo drive and plasticising axes, as well as servo-hydraulic movement of the injection unit. MC6 control based on an industrial PC with real-time Ethernet technology. Plasticising unit complete thermoplasticisation unit screw diameter 22 mm nozzle radius 10 mm, nozzle opening 4 mm Clamping force [kN] 500 Clamping plate dimensions (hxv) [mm] 490 x 440 Clearance between columns (hxv) [mm] 370 x 320 Min./ max. mould height [mm] 150 - 450 Maximum opening width [mm] 750 Djbvrtiopy Drho Recg Injection unit Screw diameter [mm] 22 Injection volume [cm3] 38 Injection size [g] 35 Injection pressure [bar] 2500 Electric-hydraulic equipment Pump motor rated power [kW] 6.1 Heater power [kW] 6.3 Dimensions and weight Net weight with control unit [t] 4 Dimensions (L x W x H) [m] 4.2 x 1.44 x 1.85

Year of construction: 2006, Condition: excellent (used), Injection moulding machine Demag Extra 160-600 Year of manufacture 2006 Clamping force 1600 kN Tool opening stroke 500mm Minimum mould height 275mm Maximum mould height 585mm Maximum distance between plates 1085mm Size of clamping plates 770 x 770mm Spacing between columns 520 x 520mm Maximum tool weight 2200kg Ejector stroke 160mm Ejector force 59kN Dcebvepiqhrerti Reg Auger diameter 45mm L/D 20 Specific injection pressure 1910 bar Injection volume 323 ccm Injection mass (PS) 291g Heater power 11.3 kW Pump motor power 22kW Oil tank capacity 220l Machine weight 6400 kg Dimensions (L x W x H) 5.3 x 1.5 x 2.0 m

Condition: excellent (used), Year of construction: 2000, Injection molding machine Arburg 420 C 1000-250 Year of manufacture 2000 Selogica control Closing zone Closing force 1000 kN Dcobvrtioqqkqle Rog Minimum mould height Column spacing 420 x 420 mm Mounting plate dimension 605 x 605mm Opening stroke of mold 500mm Maximum opening width 750mm Injection unit Screw diameter 35mm Injection weight (ps) 132g Injection volume 144cm3 Specific injection pressure 1820bar Power supply and dimensions Pump motor power 18.5 kW Heater power 6.5 kW Weight of the machine 3.18T Dimensions (L x W x H) 4.3m x 1.7m x 1.8m

Condition: excellent (used), Year of construction: 2009, Battenfeld HM 65/210 injection molding machine Year of manufacture - 2009 Control - Unilog B6E Closing unit : - maximum closing force : 650 kN - clearance between columns : 370 x 320 mm - minimum mold height : 225 mm - mold opening path/force : 450/35 mm/kN - maximum possible distance between clamping plates : 675 mm - ejector travel/force : 150/26.4 mm/kN Injection unit : - screw diameter : 30 mm - specific injection pressure : 2042 bar - calculated injection volume : 106 cm3 - L/D ratio of screw : 22 - screw speed : 310 min to -1 - maximum screw torque : 490 Nm - plasticization capacity : 12.0 g/s PS Technical parameters : Dcsbju U A Ivsvrti Rog - power of drive system : 11 kW - dry cycle time according to EUROMAP 6 : 1.8-259 s-mm - oil tank capacity : 200 l - machine dimensions : 3.6x1.4x2.0 m - weight of the injection machine : 3100 kg

Condition: excellent (used), Year of construction: 2012, Battenfeld HM 110/350 injection molding machine Year of manufacture :2012 Control : Unilog B6 E Injection unit: Screw diameter: 35 mm Injection pressure: 2083 bar Injection volume: 169 ccm Injection volume: 153 g Closing unit : Closing force : 1100 kN Distance between columns : 470 x 420 mm Mold height min: 275 mm Opening : 500 mm Mould height max : 775 mm Ejector stroke: 150 mm General information: Machine dimensions (m) LxWxH: 4.0 x 1.5 x 2.1 m Weight : 4,500 kg Dobju U Ar Isvrti Rjcg Equipment: - The machine is in very good condition and has 35,000 hours of operation. - Bimetallic system - 1 x pneumatic valve - 1 x pulling core - Interface for the robot in accordance with EUROMAP 67

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot LRX 500 Year of production - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm Debvrteu E Rkcsi Rjcg TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: good (used), Year of construction: 2007, Krauss Maffei KM 950-17200 MX injection molding machine Year of manufacture - 2007 Wittmann robot W 842 -2016 year X-1200 mm Y-1600 mm Z-4000 mm Fully hydraulic locking system. Industrial computer based control system with integrated control panel with color touch screen display Plasticizing system Complete plasticizing system for thermoplastics HPS-UN high-performance screw with a diameter of 120 mm Nozzle radius: 30 mm Nozzle opening: 12 mm Closing zone Closing force 9500 kN Opening force 665 kN Column spacing 1400 x 1150 mm Mounting plate dimension 1960 x 1710 mm Opening stroke 1900mm Min/Max mould height 500mm/1200mm Maximum opening width 2400mm Dobvrtiou E N I Ts Rscg Ejector stroke 300mm Injection unit Screw diameter 120mm Injection weight (HDPE) 5420g Injection volume 7634 cm3 Specific injection pressure 2257 bar Dimensions : Weight of the machine 61.5 t Dimensions (L x W x H) 12.77 x 3.42 x 2.75m

Condition: good (used), Year of construction: 2004, Battenfled injection molding machine HM 8000 2P / 5400 B4 Year of manufacture - 2004 Closing force 8000 kN Opening stroke 1175 mm Mould height min/max 450-950 mm Clearance between plates 2125 mm Clearance between columns 1310 x 1210 mm Auger diameter 100mm Injection pressure 1613 bar Injection volume 3338 ccm Weight of PS injection 3038 g Weight of PE injection 2370 g Plasticizing speed 190 min-1 Dcsbvou Eqy Rjrti Rsg 2 x hydraulic core 2 x air valve Euromap 67 for the robot

Condition: good (used), Year of construction: 2004, BATTENFELD HM 10000 2P/9200 injection molding machine Control system: UNILOG B4 Year of construction: 2004 Dobvrtju Egp Uji Rocg Closing system Closing force : 10000 kN Column spacing h x v: 1120 x 1400 mm Plate dimensions h x v: 1960 x 1690 mm Mounting height min: 550 mm Mounting height max: 1020 mm Opening stroke: 1100 mm Ejector stroke: 300 mm Ejector force: 118 kN Moving plate centering D: 250 mm Centering of fixed plate D: 315 mm Injection system Screw diameter: 120 mm Injection volume : 5655 ccm Injection weight : 5146 g Injection pressure: 1632 bar Screw length : 22 l/d Screw stroke : 500 mm Screw speed: 130 min Screw torque: 11370 N Dimensions and weight Machine dimensions LxWxH: 11.6m x 2.9m x 2.5m Total weight: 76500 kg Equipment 2 x core on fixed plate, MOOG control 2 x mold pneumatic nozzle control on fixed plate 1x hydraulic mold nozzle control on fixed plate 2 x pneumatic blow-off valves on moving plate