Condition: excellent (used), Year of construction: 2010, Arburg 720S 3000-1300 injection molding machine Multilift robot Year of production - 2010 Closing system: Closing force: 3200 kN Column spacing h x v: 720 x 720 mm Plate dimensions h x v: 1040 x 1040 mm Min. mounting height: 300 mm Max. mounting height: 700 mm Maximum distance between plates: 1400 mm Opening stroke: 700 mm Ejector stroke: 250 mm Ejector force: 100 kN Moving plate centering D: 165 mm Fixed plate centering D: 165 mm Crobvievu Hrqs U Hwob Mold weight: 3600 kg Injection system: Screw diameter: 60 mm Stroke volume: 664 ccm Injection pressure: 2000 bar Screw length: 20 l/d Screw pitch: 235 mm Screw torque: 1640 N Plasticizing flow: 306 g/s PS Number of heating zones: 8 Nozzle path: 550 mm Dimensions and weight Machine dimensions LxWxH: 6.8m x 2.1m x 2.2m Total weight: 17500 kg

Condition: good (used), Year of construction: 2021, operating hours: 2,109 h, Functionality: limited functionality, 160t clamp tonnage, 35mm main barrel with 150ccm shot volume, 15mm secondary barrel with 15ccm shot volume, 16 hot runner zones, 4+4 shut off nozzle valves, servo driven swivel unit on moving half. Comes with Eunil Magazine Loader and Viper 12-RC300 robot Notes - 1. Two machines available for sale 2. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. Cjbvi Uovmulie Hwjrb The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: used, Year of construction: 2010, Technical details: screw size: 55 mm injection shot weight in Polysterol: 36 g/PS closing pressure: 3200 kN total power requirement: 65,7 kW Crsbvijtuncrs U Hwob weight of the machine ca.: 13 t

Condition: excellent (used), Year of construction: 1992, Clamping force 8,000 kN Opening stroke 1,000 mm Clamping platens 1,620 x 1,525 mm Tie bar diameter 180 mm Cjbvi Ustucrce Hworb Screw diameter 105 mm Special injection weight 3,740 g Machine weight 65 tons

Condition: good (used), Year of construction: 2014, complete plastic factory Crjbevlmi Rovi U Hweb

Condition: used, Year of construction: 1998, Spritzgießmaschine, Fabr. Stork, Typ SX-N 6600-5600, Bj 1998, SN X66503, Schließkraft 6.600 kN, Holmabstand horizontal/vertikal 900/900 mm, Aufspannplatte horizontal/vertikal 1.350/4.440 mm, Formeinbauhöhe max./min. 900/300 mm, Formöffnungsweg 940 mm, Werkzeuggesamtgewicht max. 8.600 kg, Zentrierung DS/AS 200/125 mm, Traversengewinde M20, Spritzdruck 21.000 N/cm², Spritzvolumen 2.494 cm³, Schnecken-Ø 84 mm, Kaskade 4-fach, Kernzüge FAP/BAP 2/1, Heizkreise Ma/PSG 8/0, Anschlussleistung 330 kW, Maschinengewicht 34.300 kg, Steuerung, Fabr. Stork, Type CDS500, Linear-Entnahmeroboter, Fabr. Engel, Type ERC 84/1-E, Bj. 2003, SN 97607 Csbvjuw Uqdji U Hworb

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100 – 12000 MX injection molding machine Robot - Wittmann Crjbvievu Hp As U Hwob Year of production - 2008 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and built-in 3 USB ports. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, screw diameter 120 mm, with non-return lock and open nozzle TECHNICAL DATA Closing unit - Mold closing force: kN 11000 - Mold opening force: kN 770 - Dimensions of the mounting plate (h x v): mm 2210 x 1910 - Clearance between columns (h x v): mm 1550 x 1250 - Mold opening path: mm 2000 - Mold installation height (min - max): mm 600 - 1200 - Plate opening stroke: mm 2600 - Ejector stroke: mm 300 - Ejector force: kN 220/110 Injection unit - Screw diameter: mm 120 - Pressure injection: bar 1758 - Injection volume: cm3 6786 - Injection weight for PS: g 6175 - Number of screw revolutions, standard/option: rpm 103/145 - Injection efficiency (standard) ccm/s 1118 - Injection efficiency (accumulator) ccm/s 1696 Electric-hydraulic equipment - Nominal power of the pump motor: kW 132 - Installed power of heaters: kW 82 - Number of cylinder heating zones: - 7 - Number of dry cycles according to Euromap: 1/h 802 - Oil tank capacity: l 2440 Dimensions and weight - Net weight with control cabinet: t 73 - Machine dimensions (length x width x height): m 12.47 x 3.65 x 2.82

Condition: like new (used), Year of construction: 2019, Krauss Maffei Injection Molding Line including a Kraus Maffei Injection Molding Machine, Model 50/55 CX with Krauss Maffei handling unit, Model LRX 100 (serial 2118838); tray unstacking station; discharge blower, collection device and tray filling station; and Kemapack GmbH strapping/wrapping machine. Csbjmn Tu Hsvi U Hwerb

Year of construction: 2007, Condition: excellent (used), Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of manufacture: 2007 Control unit: MC 4 Clamping unit: Clamping force: 650 t opening stroke: 1150 mm Mold installation height min. : 600 mm platen distance max. : 1750 mm tie bar distance (h x v): 1100 x 900 mm platen dimensions (h x v): 1510 x 1370 mm centering (nozzle- ejector plate): 200 / 200 mm 1.injection unit screw diameter : 80 mm Injection weight in PS. Max. : 1400 g Haulqtz Stroke volume: 1543 ccm Injection pressure : 2205 bar 2nd injection unit Screw diameter: 45 mm Injection weight in PS: 278 g Stroke volume: 305 ccm Injection pressure: 2.336 bar Accessories: 2 x air valve 16 -times cascade Cjbokw T A Ujvi U Hworb 3 x core pull on BWAP 3 x core pull at FWAP 20 x hot runner control stations Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Total size L x W x H: 7.8 x 2.5 x 2.5 m Operating hours: 45400 h Machine can also be used as a 1 K machine.

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, clamping force: 400 kN, screw diameter: 30 mm, injection pressure: 1.45 bar, injection weight: 88 g, total length: 3,510 mm, total width: 1,220 mm, total height: 1,900 mm, overall weight: 3,000 kg, heating capacity: 6.9 kW (9.38 HP), power: 21.9 kW (29.78 HP), Engel 200/40 injection molding machine Crobvi U Hjryxl Tjwob Technical data: Screw diameter 30mm Injection weight 88g Injection pressure 1450bar Dosing volume 99ccm Clamping force 40t Size of the clamping plates 550x430mm CC90 control system (Norwegian language) Weight 3000kg Dimensions 3.51x1.22x1.90m Heating capacity 6.9 kW Total output 21.9kW Location: Austraße 34 57076 Siegen

Year of construction: 2002, Condition: excellent (used), Model: ES 750H330W/250 HL-2F Year : -99 Cjbvsiv Swxsi U Hwsrb

Condition: used, Year of construction: 2002, Spritzgießmaschine, Fabr. Engel, Typ Duo 7050/1000, Bj 2002, SN 46387, Schließkraft 10.000 kN, Holmabstand horizontal/vertikal 1.400/1.150 mm, Aufspannplatte horizontal/vertikal 2.000/1.830 mm, Formeinbauhöhe max./min. 1,200/400 mm, Formöffnungsweg 1,800 mm, Werkzeuggesamtgewicht max. 18.000 kg, Zentrierung DS/AS 250/250 mm, Traversengewinde M24, Spritzdruck 16.500 N/cm², Spritzvolumen 4.160 cm³, Schnecken-Ø 120 mm, Kaskade 12-fach, Kernzüge FAP/BAP 0/2, Heizkreise Na/PSG 16/60, Anschlussleistung 340 kW, Maschinengewicht 65.000 kg, abgel. Betriebsstd. 04.101, Linear-Entnahmeroboter, Fabr. Engel, Type ERC A4/XXX, Bj. 2002, SN 11245, Schutzumhausung, integr. Werkzeugkühlsystem, Fabr. Oni, Type Rhytemper Crjbsuxcd Isvi U Hweb

Condition: excellent (used), Year of construction: 2005, Demag Multi 80/420-80h/120v injection molding machine - 2K machine Year of production: 2005 Control type: NC 4 Control Closing system: Hydraulic TECHNICAL DATA Closing force: 800 kN Clearance between columns: 420 mm x 420 mm Plate dimensions: 590 mm x 600 mm Mould size: min 250 mm Maximum opening path: 500 mm Maximum distance between plates: 750 mm Two-component machine 1/Horizontal nitrided system, screw diameter 18 mm 2/Vertical system, bimetallic screw diameter 25 mm Crjbviovuzz Hs U Hwjb Full machine history available GENERAL DATA Motor: 18.5 kW Heaters: 8.8 kW Dimensions L x W x H: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg EQUIPMENT Language: German

Condition: like new (used), Year of construction: 2019, Krauss Maffei Injection Molding Line with Injection Molding Machine, Model 110/750 CX with Digicolor Drying Station, Model DW 25/40 (serial 191511221); Krauss Maffei handling unit, Model LRX 100 (serial 2118836); Keyence Deutschland GmbH Discharge Blower, Model SJ-FW; and associated belt conveyors. Csbvijmn S Efo U Hwerb

Condition: good (used), Year of construction: 1998, Clamping force: 800 kN, Screw diameter: 40 mm, Stroke volume: 204 cm³, Injection volume: 131 cm³/s, Screw speed: 310 1/min, Plasticizing capacity max.29 g/s, Nozzle pressure: 84 kN, Nominal power of pump motor: 15 kW, Installed heating power: 12 kW, Adjustable barrel heating zones: 5, Drying cycle rate: 2000 1/h, Tank capacity: 270 ltr, Machine dimensions approx.: 4.10 m x 1.40 m x 2.02 m, Total weight of machine: 3500 kg, Weight of mold: 860 kg Crobvsuc Szzei U Hweb

Condition: used, Year of construction: 1989, operating hours: 74,900 h, clamping force: 850 kN, screw diameter: 40 mm, overall weight: 3,700 kg, Machine no. 145464 Year of construction 1989 Machine weight 3700 kg (without oil filling) Clamping force 850kN Heating 8,31KW Motor 18,5KW Total power 27,2KW Machine cycles 7,112,306 Operating hours 74,900h Interfaces: Master computer, handling, blow-out, selector switch, core pull 1 hydraulic, mold temperature control 3 pcs. Crobsr Hrqrjvi U Hwsb The following accessories etc. are included with the machine: Complete 50 injection unit thermoplastic , Selecting diverter , Hydraulic infeed conveyor (height adjustable 3 levels) (integrated in control) , Diskette drive external (Arburg original) , Documentation and work reports from the machine by Arburg Service , Machine setting course CMD documents (folder) , E-plan , Documents also in digital form , Oil filling (must be pumped into a container before transport (pump is available)) , Electronic water battery

Condition: excellent (used), Year of construction: 2003, operating hours: 27,900 h, Functionality: fully functional, clamping force: 1 kN, screw diameter: 32 mm, Type: HL120 RS35/32 Crebviju E Unfo U Hwjb Year : 2003 Auger ø 32 mm Hours: 27.900 h

Year of construction: 2005, Condition: good (used), Demag Injection Moulding Machine Crobvi Uslpad Se Hwjb Type: 200/580-840 Extra with robot Control: NC 4 Year: 2005 Clamping unit Clamping force t: 200 Opening stroke mm: 575 Distance between tie bars mm: 580x580 Installation height min/max mm: 340/690 Mould fixing platen size h x v: 860x860 Injection unit Screw size mm: 50 Injection shot weight in Polysterol gr: 400 Injection volume cm³: 442 Injection pressure increased bar: 1946 Size and weight Dimension HxWxD m: 5.4x1.7x2.1 Total weight Kg: 8200 Additional information Robot Kerzüge 1

Condition: excellent (used), Year of construction: 2004, Battenfeld HM 2700 / 1330 injection molding machine Year of production - 2004 Control - Unilog B4 Closing system : Closing force : 2.700 kN Mold platen size (h x v): 1030 mm x 1020 mm Distance between columns (h x v): 710 mm x 630 mm Mould opening stroke: 800 mm Min. mold height: 350 mm Maximum mold height: --- mm Max. daylight: 1150 mm Hydraulic ejector - stroke: 200 mm Ejector force forward/backward: 59 kN Injection system : Screw diameter: 55 mm Ls/D ratio: 22 Injection pressure: 2041 bar Sweep volume: 653 ccm Injection weight, PS: 594 g Injection stroke: 400 mm Screw speed: 318 1/min Maximum plasticization rate: 59.3 g/sec. Nozzle pressure: 100 kN Electrical and hydraulic equipment Csbvi U Hjvt Rutsworb Installed heating power: 18.2 kW Adjustable drum heating zones: 1+4 Oil tank capacity - 650 l Dimensions and weight Total machine weight: 12,000 kg Dimensions (L x W x H) 5.6 x 1.8 x 2.2 m

Condition: like new (used), Year of construction: 2010, operating hours: 8,300 h, Functionality: fully functional, screw diameter: 14 mm, Autonomous injection unit Cebet Dzz Usvi U Hworb Make: Ferromatik Milacron Type: SE -55 Screw: 14 mm Operating hours: 8 300h Year: 2010 Separate control cabinet with control and servo amplifier and a control terminal with 10.4 inch touch screen. The self-contained injection unit gives you an easy introduction to multi-component technology. It is fully electric and energy efficient. + Quick retrofit for almost any machine + Increased machine flexibility depending on production requirements

Year of construction: 2006, Condition: good (used), Krauss Maffei Injection Moulding Machine Type: KM 650 5000 CM\2 with robot Control: MC4 Year: 2006 Clamping unit Clamping force t: Crobvi Uslpafts Hwsb 650 Opening stroke mm: 1750 Distance between tie bars mm: 1000x929 Installation height min/max mm: 650/1150 Mould fixing platen size h x v: 1490x1440 Injection unit Screw size mm: 100 Injection shot weight in Polysterol gr: 3200 Injection volume cm³: 3334 Additional information 6 F. Kaskade Kernzüge 2

Condition: good (used), Year of construction: 1998, operating hours: 83,000 h, screw diameter: 50 mm, overall weight: 7,400 kg, Demag 150 tons Auger diameter: 50 mm Csbvi U Hst Dx Hbeworb Impact volume: 399 cc Shot weight: 360 g Opening path max: 500 mm Mold height min: 250 mm Mold height max: 560 mm (660 with WA) Max. distance between moldboards: 1060 mm (1160 with WA) Mold table size H*V: 750*750 mm Distance between tie bars H*V: 500*500 mm Max. tool weight: 1700 kg

Year of construction: 2004, Condition: excellent (used), Krauss Maffei Injection Moulding Machine Type: KM 2300/12000 MC Control: MC 4 Year: 2004 Clamping unit Clamping force t: 2300 Opening stroke mm: 3700 Distance between tie bars mm: 2000 x 1600 Installation height min/max mm: 1100/1800 Mould fixing platen size h x v: 2830 x 2400 Injection unit Screw size mm: 105 Injection shot weight in Polysterol gr: 4727 Injection volume cm³: 5195 Injection pressure increased bar: 2296 Size and weight Dimension HxWxD m: Crjbvspvi T Nei U Hwjb 14.2 x 4.15 x 2.84 Total weight Kg: 143.000 Additional information Robot System Kernzüge Heizkanalregler

Condition: good (used), Year of construction: 1995, operating hours: 44,283 h, Functionality: fully functional, screw diameter: 30 mm, displacement volume: 98 cm³, injection weight: 88 g, overall weight: 5,300 kg, Angel 90 tons Incl. robot (ASS) Crebvi Uot Dxqte Hwob Production in clean room.

Condition: used, Year of construction: 1996, operating hours: 54,800 h, Functionality: fully functional, clamping force: 250 kN, screw diameter: 25 mm, overall weight: 2,900 kg, Engel 25 tons incl. Engel picking robot Max opening distance: 248mm Max ejection distance: 100mm Crebvi Uet Dw Iko Hwjb Distance between tie bars: Tie bar free Mold table size: W 550mm H 430 mm Mold ring size: 100mm Water battery: 4 channels, Also sits cooling block with 4 channels. Core features: Program available. No sockets Socket for color doser: Yes Interface: Only for Engel's own picking robot. Hot runner control: No Electrical outlets on machine: 3 single phase. 4 x 3-phase.