Condition: good (used), Year of construction: 2004, * CNC-control Heidenhain iTNC 530 * Number of Controlled Axes: 5 + spindle * NC-swivel-type rotary table, diameter 800 mm - Workpiece weight in clamped horizontal position 1000 kg - Positioning mode for both axes 600 kg (upper 30 deg. 500 kg) - 4-5 axes simultaneous mode 400 kg Knsdpfxsx E T Rts Agzjf - Swivel range 45 deg. to the work spindle, 25 deg. away from the work spindle * 60-Position Tool Changer * Direct Measuring System, Resolution 0.001 mm * Coolant System (no coolant through spindle) * Chip Conveyor x-travel 800 mm y-travel 1000 mm z-travel 655 mm Feed Rate: 10,000 mm/min Rapid Traverse: 30,000 mm/min Spindle Speed: 0 - 15000 rpm Tool Holder: ISO 40 Power: 18/24 kW Total Power Requirement: 40 kW Machine Weight: 10,500 kg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm Kedpoq Nqkxefx Agzenf MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: excellent (used), Year of construction: 2011, Hurco VMX60SR 5 Axis CNC Vertical Machining Centre With Hurco Winmax Dual Screen Control Table Dimension 1,670 x 660mm (5 'T' Slots). Rotary Table Dimension Ø610mm (5 'T' Slots). Axis Travel 'X'=1,525mm, 'Y'=660mm, 'Z'=610mm, 'B'=0-92°, 'C'=360°. Maximum Rapid Traverse 30m/min. Maximum Spindle Speed 12,000rpm. Spindle Taper ISO 40. S/No: S374F2210122DFDCH (2011). With Spindle Inspection Probe, Renishaw Toolsetter, Coolant System, Chip Conveyor, Filtermist FX7002 Mist Extraction Unit, Wash Gun, Handwheel, Signal Tower. Please View Last Service Report 27/05/2025 (Attached). Note: Spindle Tooling & Vices Not Included. Knsdox H Tbbspfx Agzof

Condition: ready for operation (used), Year of construction: 2001, General Data Machine weight 5500 kg Measurements height 2634 mm Control Unit Brand FANUC Model 18-M Main Drive Spindle Speed 10000 RPM Spindle motor power 9 kW Tool taper BT 40 Number of axis 4 Movement X-Axis Movement 800 mm Z-Axis Movement 505 mm Y-Axis Movement 500 mm Tools Max weight 6 kg Dimensions Machine Length 2530 mm Table Table load 500 kg Knodpfx Ajx E Ed Segzjf This 4-axis ANAYAK 8-HS was manufactured in 2001. It features a Fanuc 18-M CNC, with travels of 800 x 500 x 505 mm, and a table that can support up to 500 kg. The spindle operates at 10,000 rpm with a BT 40 taper and has a power of 9 kW. It includes a 24-position tool changer and additional equipment like a 4th axis, spindle cooler, and chip conveyor. Consider the opportunity to buy this ANAYAK 8-HS vertical machining center. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2003, travel -x axis 1.200 mm travel -y axis 900 mm travel -z axis 500 mm control HEIDENHAIN tool taper SK 40 milling spindle dia. in forward position 70 mm table surface area 1.400 x 900 mm Milling machining centers - vertical | HERMLE - C 1200 V equipped with tool changer. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C1200 V | C-1200 V | C 1200-V | C1200V Knjdpfx Agex E Dr Ijzof

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC Control: Heidenhain TNC Storage location: Halberstadt Country of origin: Germany Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Clamping Area: 3900 x 650 mm T - groove width: 18 mm T - slot spacing: 125 mm Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm Knedpfxjx Hn Dqe Agzef coolant: 250 bar Further information: - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 1999, Technical details: x-travel 1350 mm y-travel 900 mm z-travel 750 mm Table size 1400 x 840 mm Feed rate 10000 mm/min Rapid traverse 30000 mm/min Spindle speed 12000 rpm Tool taper ISO 40 total power requirement 46 kW weight of the machine ca. 10,1 t CNC-control Heidenhain TNC 426 M 46-station ATC Coolant system Coolant through spindle Chip conveyor Ksdpfex E T I Eox Agzjnf Direct measuring system with 0.001 mm resolution Electronic handwheel

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1300 mm Y-AXIS TRAVEL: 670 mm Z-AXIS TRAVEL: 625 mm DISTANCE SPINDLE NOSE-TABLE: 150-775 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 12000 rpm; 11-18,5 kW; 117,8 Nm; ISO 40 - DIN TABLE SIZE: 1500 x 670 mm MAX ADMITTED LOAD: 1300 Kg TOOL MAGAZINE: BASKET-TYPE ; 30 POS MAX TOOL DIAMETER: 76 (125) mm Knsdew Dkfljpfx Agzsf MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC i Series Plus WEIGHT: 8500 Kg OVERALL DIMENSIONS: 2600 x 3350 x 3120 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PCMCIA SERIAL PORT ; USB PORT ; PORTABLE HANDWHEEL NOTE: 4TH-AXIS PRE-SET

Condition: ready for operation (used), Year of construction: 2011, operating hours: 6,692 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Number of axis 3 Additional Equipment Changing table available Ksdox D H Itjpfx Agzjnf 24+1 tools in ATC This 3-axis WEMAS VZ 860 APC vertical machining centre was manufactured in 2011. Ideal for precision machining, it features robust construction and reliable performance. Consider the opportunity to buy this WEMAS VZ 860 APC vertical machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Year of construction: 2007 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Number of radial T-slots: 5 Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t Further information: Distance spindle nose - table: 100 - 620 mm Tool clamping: disk spring Kjdpfjx Hn Atex Agzonf Machine can be inspected under power by arrangement.

Condition: ready for operation (used), Year of construction: 2019, - USED - 3-AXIS VERTICAL MACHINING CENTRE   Kedpfx Agonzn I Eszsnf X-AXIS TRAVEL: 1360 mm Y-AXIS TRAVEL: 700 mm Z-AXIS TRAVEL: 700 mm DISTANCE SPINDLE NOSE-TABLE: 100-800 mm DISTANCE COLUMN-SPINDLE AXIS: 792 mm RAPID FEEDS X-Y-Z: 32 m/min SPINDLE: 12000 rpm; 11-16.5-20-28 kW; BBT-40 TABLE SIZE: 1400 x 700 mm MAX ADMITTED LOAD: 1000 Kg HIGH PRESSURE COOLANT: 20 Bar TOOL MAGAZINE: CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER: 75 (150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 7 Kg CONTROL UNIT: HEIDENHAIN TNC 620 WEIGHT: 9000 Kg OVERALL DIMENSIONS: 4670 x 2985 x 3105 mm ACCESSORIES: SWARF CONVEYOR ; ETHERNET PORT ; USB PORT ; PORTABLE HANDWHEEL

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,186 h, Control Unit Knsdjx D Iiropfx Agzsf Brand HEIDENHAIN Model ITNC530 Main Drive Spindle speed range 12000 Tool taper SK40 Number of axis 5 This 5-axis DMG MORI DMU 60 MonoBlock was manufactured in 2010. It features a 60-tool automatic tool changer, a maximum spindle speed of 12,000 RPM, and SK40 tool holder. Additional features include a Heidenhain TS649 probe, 3D quickSET, and 40 bar through-spindle coolant. Ideal for complex and precise machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Year of construction: 2016 Type of control: CNC Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Ksdpex Hnx Ujfx Agzonf Further information: THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 1996, Control Unit Brand HEIDENHAIN Main Drive Spindle speed range 15000 Tool taper SK40 Number of axis 3 Knsdpfxox D Izzj Agzof This 3-axis Hermle C800V was manufactured in 1996. It features a SK40 spindle, capable of reaching up to 15,000 RPM, and includes tool length measuring. Ideal for precise vertical machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, Control Unit Knsdsx D E Hhspfx Agzjf Brand HEIDENHAIN Main Drive Number of axis 3 Tool taper SK 40 This 3-axis DECKEL MAHO 64 V linear was manufactured in 2002. It features an SK40 tool holder and a 30-tool automatic tool changer. The machine includes a paper band filter. Note, the probe requires servicing due to a communication error. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO 64 V linear machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand SIEMENS Model 840 D Main Drive Number of axis 4 Kodpfx Aox D I A Sjgzenf This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, it's ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, operating hours: 5,834 h, Control Unit Knsdpox D Rbwsfx Agzef Brand HEIDENHAIN Main Drive Spindle speed range 10000 RPM Tool taper SK 40 This 3-axis DMG MORI DMC 1035V was manufactured in 2011. It features a vertical machining center with a 30-tool automatic tool changer, SK 40 tool holder, and a spindle speed of up to 10,000 RPM. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 1035V machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand MAZATROL Additional Equipment Coolant Gun / Alarm SMS Modem / Easy Workpiece Airblast / Renishaw TS27R on LHS / Auto Pecking Cycle with Load Detection FITOOL Tip Point Control/Simultaneous 5 Axis / FITOOL Radius Compensation/5 Axis / EIA Dynamic Compensation 2 /3D Co-ordinate Conversation / Ethernet Operation Function / Bicyclindrical Interpolation Kedpfx Ajx D Emzegzenf This 5-axis Mazak Variaxis i-700 was manufactured in 2016, featuring a 40-tool magazine, high-pressure coolant system, and a spindle speed of 18000 RPM. It includes advanced options like synchronized tapping, Renishaw TS27R probe, and simultaneous 5-axis capabilities. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1995, Main Drive Spindle speed range 10000 Movement X-Axis Movement 1000 mm Y-Axis Movement 500 mm Ksdpfxjx D Sbfe Agzonf Z-Axis Movement 500 mm Media Internal cooling Yes This 3-axis FADAL 906-1 vertical machining center was manufactured in 1995. It features X, Y, and Z axes with travel distances of 1000mm, 500mm, and 500mm respectively. If you are looking to get high-quality milling capabilities, consider the FADAL 906-1 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2012, operating hours: 6,634 h, Control Unit Knodsx D H Iyopfx Agzsf Brand HEIDENHAIN Model iTNC 530 Main Drive Number of axis 3 Additional Equipment Machine comes with changing table Plenty of accessories available that can be sold additionally 24+1 tools in ATC This 3-axis WEMAS VZ 860 APC vertical machining center was manufactured in 2012. Ideal for precision machining, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the WEMAS VZ 860 APC machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand HAAS Kedpfxex D Hxxo Agzenf Main Drive Spindle Speed 12000 RPM Tool taper BT 40 Tools Slots in storage 24 Media Internal cooling yes This 3-axis HAAS VF-2SS was manufactured in 2014 and features an internal coolant system (IKZ), a probe, and tool measuring capabilities. Ideal for precise and efficient machining tasks. If you are looking to get high-quality milling capabilities consider the HAAS VF-2SS machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2021, operating hours: 295 h, Control Unit Brand HAAS Main Drive Spindle speed range 15000 Tool taper HSK A63 Number of axis 5 Knodsx D I Sgopfx Agzjf This 5-axis HAAS UMC 1500 DUO was manufactured in 2021, featuring a high-speed 15,000 rpm spindle, HSK A63 interface, and a 50+1 side-mounted tool changer. It includes internal cooling at 21 bars, chip conveyor, and full 5-axis capabilities for complex machining tasks. Consider the opportunity to buy this HAAS UMC 1500 DUO vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, operating hours: 24,243 h, Control Unit Brand HEIDENHAIN Model TNC 530 Kjdpfox D Eybex Agzonf Main Drive Number of axis 4 Tools Number of index 100 Type of tool holder HSK 63 Additional Equipment 40 bar IKZ This 4-axis DMG DECKEL MAHO DMF 300 was manufactured in 2003. It features a vertical machining center with 100 ATC tools, HSK 63, and a 40 bar IKZ. Consider the opportunity to buy this DMG DECKEL MAHO DMF 300 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2020, Control Unit Knedpfex D Emnsx Agzof Brand MAZATROL Additional Equipment Knoll Chip Conveyor Hinge Type 640 5-1 ( Knoll Filter System KF200 1250 / Magnetic Conveyor / Pump "Cover Coolant" 100 L/min 2 Bar / High Pressure Pump 31 L/min 70 Bar / Pump "Flood Coolant" 40 L/min 5 Bar / Electric Switch Cabinet / Coolant Gun This 5-axis Mazak Variaxis i-700 was manufactured in 2020, featuring a 40-tool magazine, high-speed spindle at 18000 RPM, and advanced capabilities like 5-axis radius compensation and 3-D coordinate conversion. Ideal for complex machining tasks, it also includes a Knoll chip conveyor and high-pressure coolant systems. If you are looking to get high-quality milling capabilities consider the Mazak Variaxis i-700 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 5 This 5-axis Mazak VTC 800/30SR was manufactured in 2014, featuring a robust 155-tool ATC, 15 bar through-spindle coolant, and a KUKA robot for enhanced automation. It includes a technology package for 5-axis milling and a robot interface, making it ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information about this machine. Application Types Milling Knjdsx D I A Eepfx Agzjf