Year of construction: 2003, condition: good (used), Traverses X Y Z: 810 x 610 x 500mm, Table 350mm diameter, C axis (rotary) 360o, A axis (Tilt) +30o/-120o, Spindle speed 12000 rpm, Spindle taper BT40, Spindle Motor 13kW, Rapid feedrates 43m/minute, Heidenhain TNC530, 30 Station side arm ATC, Coolant, Low Volt light Gkodjk Shihjpfx Aftsf

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 27000 kg Measurements height 3400 mm Gkjdpfox D Idvox Aftjf Movement X-Axis Movement 2050 mm Z-Axis Movement 800 mm Y-Axis Movement 1100 mm Main Drive Number of axis 3 Spindle Speed 6000 RPM Tool taper BT 50 Tools Slots in storage 40 Dimensions Machine Length 7200 mm This 3-axis Johnford VMC-2000SHD was manufactured in 2005. It features a large table size of 2200 × 1000 mm and extensive travels: X-axis at 2050 mm, Y-axis at 1100 mm, and Z-axis at 800 mm. With a spindle speed ranging from 10 to 6000 rpm and a tool magazine capacity of 40 tools, this vertical machining centre is ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2011, functionality: fully functional, Heidenhain TNC426 control, through-spindle coolant (IKZ), chip conveyor, SK40 tool holder, vices not included. Gjdpex Emrwofx Aftjkf

Condition: used, Year of construction: 2017, Technical details: x-travel: 1625 mm Gedpfxova Ar Dj Aftskf y-travel: 813 mm z-travel: 762 mm control: HAAS Automation spindle hours: 3127 h number of spindle speeds: max. 12.000 U/min. max. torque on the spindle: max. 122 Nm tool changer with: 30 + 1 Plätze table-size: 1626 x 711 mm max. table load: 907 kg spindle taper MT: SK40 spindle drive: 22,4 kW feed range: X/Y/Z: max. 21,2 m/min. rapid traverse:: X/Y/Z: 30,5 m/min interface: ja control voltage: 440 V air-pressure connection: 6,9 bar total power requirement: 22,4 kW Weight approx.: 10,2 t dimension coolant device: 2,5 x 1,2 x 0,9 m dimension machine xH: 4,8 x 3,2 x 2,9 m High-speed machining center Ball screws with double anchoring all axes with high-performance servomotors, directly connected to ball screw 2-stage gearbox Operation via control panel and manual control unit Chip conveyor/screw conveyor Cooling device Accessories: SK40 holder Ø finger cutter SK40 measuring finger and various small parts *

Condition: ready for operation (used), Year of construction: 2017, Main Drive Number of axis 4 Media Chip conveyor Yes Additional Equipment Gedpfx Ajx D Eqyjftokf Accessories: Tool changer, Chip conveyor, Coolant system, Magnetic clamping plate from Schunk This 4-axis Muga S500 vertical machining center was manufactured in 2017. Ideal for precision machining, it offers robust construction and advanced control features. Consider the opportunity to buy this Muga S500 vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, General Data Measurements width 2530 mm Measurements depth 2050 mm Measurements height 2650 mm Gkedpfx Afox D Epcetef Machine weight 5500 kg Main Drive Spindle speed range 10000 Number of axis 3 Movement X-Axis Movement 635 mm X-Axis Rapid Traverse 25–30 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 25–30 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 25–30 m/min Table Table load 600 kg Tools Number of station 20 Max tool diameter 80 mm Max tool length 300 mm Type of tool holder SK40 This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, Main Drive Number of axis 3 Gjdjx D Ep Aepfx Aftekf This 3-axis HAAS VF-8 vertical machining center was manufactured in 2006. It operates on a voltage of 360-480, with a phase 3 and frequency of 50/60 Hz. The full load capacity is 20 AMPS, with a largest load of 35 AMPS. Consider the opportunity to buy this HAAS VF-8 vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 840 mm Measurements depth 1090 mm Measurements height 1960 mm Machine weight 620 kg Additional Equipment Special option standard disc diameter 98 mm for dental technology Supply voltage: 200 – 240 V AC Nominal supply frequency: 50/60 Hz Nominal current: 4 A Gkodpfox D Euljx Aftef Power fuse (external): 10 A (delay-action) Air pressure: 6.5 bar Air volume: 250 l/min Air purity: Class 344 DIN ISO 8573-1 This 5-axis ESPE LAVA CNC 500 was manufactured in 2008, designed for advanced dental technology. It features a standard disc diameter of 98mm, operates within a temperature range of 18 – 25°C, and maintains a sound level of 65 dB (A). Ideal for businesses aiming to enhance automation and productivity in milling operations. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, Main Drive Spindle speed range 21000 Number of axis 4 Movement X-Axis Movement 500 mm Y-Axis Movement 400 mm Gjdpfex D N Ntsx Aftekf Z-Axis Movement 330 mm This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document). Application Types Milling

Condition: ready for operation (used), Year of construction: 2001, Control Unit Model Automation Brand HAAS Main Drive Gsdpfex D Rpzex Aftokf Number of axis 4 Movement X-Axis Movement 1300 mm Y-Axis Movement 550 mm Z-Axis Movement 710 mm Additional Equipment Two coolant pumps: external cooling and internal cooling through the spindle Rotary table for use on the A-axis Renishaw measuring system (without touch probe) This 4-axis MIKRON VCE 1300/40 was manufactured in 2001. It features a large travel range with X = 1300 mm, Y = 550 mm, and Z = 710 mm, and a tool magazine that holds 32 tools with an SK40 chuck. Equipped with a Haas Rotary Table and Renishaw measuring system, it's ideal for precise machining tasks. Consider the opportunity to buy this MIKRON VCE 1300/40 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, operating hours: 28,289 h, General Data Gedpfxex D Rats Aftjkf Machine weight 14000 kg Control Unit Brand HEIDENHAIN Model TNC 530 Main Drive Spindle speed range 10000 Number of axis 3 Movement X-Axis Movement 1500 mm Y-Axis Movement 900 mm Z-Axis Movement 850 mm Turret Tool taper SK40 Tools Number of index 24 This 3-axis Pinnacle QV 159 vertical machining center was manufactured in 2008. It features a TNC 530 control system, a travel range of X/Y/Z 1500/900/850 mm, and a 24x SK40 tool magazine. The main spindle operates at 10,000 rpm. Additional features include a chip conveyor and an internal cooling system. Consider the opportunity to buy this Pinnacle QV 159 vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, operating hours: 29,688 h, General Data Measurements width 600 mm Machine weight 110 kg Measurements height 1350 mm Measurements depth 600 mm Main Drive Number of spindles 1 Spindle Speed 20000 RPM Number of axis 4 Spindle motor power 60 kW Movement X-Axis Rapid Traverse 75 m/min Y-Axis Rapid Traverse 75 m/min Z-Axis Rapid Traverse 75 m/min X-Axis Movement 2000 mm Z-Axis Movement 550 mm Y-Axis Movement 630 mm Tools Number of index 24 Type of tool holder HSK-A 63 Additional Equipment Nominal pressure: 200 bar Test pressure: 260 bar Temperature range: -10 to 120 °C Bypass opening pressure: 7 bar Differential pressure indicator: 5 bar Maximum voltage (AC): 250 V // Maximum voltage (DC): 200 V Maximum switching current: 1 A Switching power: 70 W Protection class: IP 65 Weight: 37 kg Control Unit Brand SIEMENS Model 840D-SL Gsdpfx Afox D Dr Astjkf This 4-axis CHIRON Mill 2000 High Dynamics was manufactured in 2018. It features a single-spindle head, HSK-A 63 tool holder, and a maximum spindle speed of 20,000 rpm. The machine offers X-axis travel of 2000 mm, Y-axis travel of 630 mm, and Z-axis travel of 550 mm, with rapid traverse speeds of 75 m/min. Consider the opportunity to buy this CHIRON Mill 2000 High Dynamics vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, Main Drive Spindle speed range 8000 rpm Spindle motor power 18 kW Gsdpfox D I Afox Aftjkf Number of axis 3 Movement X-Axis Movement 760 mm Y-Axis Movement 660 mm Z-Axis Movement 610 mm Table Table load 2x1350 kg This 3-axis Hurco VTXZ vertical machining center was manufactured in 2008. It offers robust construction and precision engineering, ideal for a variety of machining tasks. If you are looking to get high-quality milling capabilities, consider the Hurco VTXZ machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, operating hours: 12,291 h, Control Unit Brand SIEMENS Model 840D solution line Gedpfx Ajx D Nmfoftekf Main Drive Tool taper HSk-A 63 Number of axis 3 Movement X-Axis Movement 630 mm Y-Axis Movement 530 mm Z-Axis Movement 450 mm Additional Equipment OPTIONAL: robot, entire cell including conveyor belts, PLC, turning station This 4-axis CHIRON DZ18W was manufactured in 2018. Ideal for precision vertical machining, this model offers robust construction and reliable performance. Consider the opportunity to buy this CHIRON DZ18W vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,818 h, Control Unit Gedpjx D D Hgefx Aftokf Brand Siemens Model 810D Main Drive Spindle motor power 13 kW Number of axis 3 Tools Type of tool holder SK 40 This 3-axis DMG DMC 635 V eco was manufactured in 2011. It features a vertical milling spindle with a tool holder SK 40, capable of speeds up to 8,000 min-¹. The machine offers a maximum drive power of 13 kW and a rapid traverse rate of 25 m/min. Ideal for complex machining tasks, consider the opportunity to buy this DMG DMC 635 V eco vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand HEIDENHAIN Model iTNC640 Main Drive Spindle Speed 42000 RPM Spindle motor power 15 kW Gkedpfxjx D Ekto Aftof Tools Slots in storage 32 This 5-axis OPS INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain Control TNC 640, a high-frequency spindle with a speed range up to 42,000 rpm, and a 32-slot HSK-E40 tool changer. The machine offers a traversing speed of 30m/min and traversing paths of 550x400x400 mm. If you are looking to get high-quality milling capabilities consider the OPS INGERSOLL High Speed Eagle V5 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1995, Control Unit Brand SIEMENS Gkjdpfxox D R R So Aftof Model Acramatic A21000 Main Drive Number of axis 3 Movement X-Axis Movement 500 mm Y-Axis Movement 500 mm Z-Axis Movement 450 mm This 3-axis Cincinnati Milacron Arrow 500 was manufactured in 1995. A vertical machining centre designed for precision and efficiency, it's ideal for detailed work in various materials. If you are looking to get high-quality milling capabilities, consider the Cincinnati Milacron Arrow 500 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2400 mm Measurements depth 2300 mm Measurements height 2600 mm Machine weight 4300 kg Main Drive Spindle speed range 12000 Number of axis 5 Movement X-Axis Movement 610 mm Y-Axis Movement 510 mm Z-Axis Movement 610 mm Table Table load 1350 Additional Equipment Coolant system with IKZ (20 bar) Spindle cooler Large chip conveyor Gkodpfex D S E Djx Aftef This 5-axis Hurco VMX 24t was manufactured in 2008, featuring a Winmax Version 9 control system, a robust table size of 762 x 510 mm, and a high-speed spindle at 12000 rpm. It supports a maximum table load of 1350 kg and offers extensive X, Y, and Z travels of 610 mm each. Accessories include a coolant system with IKZ, spindle cooler, and a large chip conveyor. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 9600 kg Godox D S Avopfx Aftekf Main Drive Spindle speed range 6000 Movement X-Axis Movement 2000 mm Y-Axis Movement 500 mm Z-Axis Movement 550 mm Additional Equipment Chip conveyor and coolant system Chip conveyor with high-pressure system This 3-axis CHIRON Mill 2000 was manufactured in 2006. It features a large travel range with X 2000 mm, Y 500 mm, and Z 550 mm, a spindle speed of 6,000 rpm, and a Siemens control system. The machine includes a 40-station tool magazine, NC swivel head, and a chip conveyor with a high-pressure system. Consider the opportunity to buy this CHIRON Mill 2000 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,737 h, Control Unit Brand RÖDERS Model RMS 6 V3.6 Main Drive Gksdpfx Ajx D Rgmeftjf Number of axis 3 Movement X-Axis Movement 760 mm Y-Axis Movement 550 mm Z-Axis Movement 300 mm This 3-axis Roders RFM 760 vertical machining centre was manufactured in 2005. It features a spindle speed range of 3,000 to 42,000 rpm and travel paths of 760 mm in X, 550 mm in Y, and 300 mm in Z. Equipped with Röders RMS 6 V3.6 control, it offers precise machining capabilities. If you are looking to get high-quality milling capabilities, consider the Roders RFM 760 machine we have for sale. Contact us for further details regarding this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 8000 Number of axis 3 Movement X-Axis Movement 1145 mm Y-Axis Movement 615 mm Z-Axis Movement 615 mm Additional Equipment Equipment: Automatic tool changer, coolant system with internal cooling This 3-axis Pinnacle LV116 vertical machining center was manufactured in 2008. It offers robust and precise machining capabilities, ideal for a variety of applications. If you are looking to get high-quality milling capabilities, consider the Pinnacle LV116 machine we have for sale. Contact us for more information. Application Types Milling Gkjdpfxex D Rpuj Aftsf

Condition: ready for operation (used), Year of construction: 2008, operating hours: 32,157 h, Control Unit Brand SIEMENS Model 840D Main Drive Gedpex D Rvbofx Aftjkf Spindle motor power 26 kW Movement X-Axis Movement 6000 Y-Axis Movement 800 Z-Axis Movement 600 Additional Equipment Number of Tools: 52 This 5-axis Unisign UNIVERS 6 vertical machining center was manufactured in 2008. It offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this Unisign UNIVERS 6 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand HEIDENHAIN Model MILLPLUS Main Drive Tool taper SK 40 Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 700 mm Z-Axis Movement 600 mm Turret Number of turrets 1 This 5-axis DECKEL MAHO DMC 60 Hi Dyn was manufactured in 2002. It features a HEIDENHAIN MILLPLUS CNC, pallet dimensions of 630 x 500 mm, and a magazine capacity of 60 tools. The spindle taper is SK 40, and it includes internal coolant through the spindle at 40 bars. Consider the opportunity to buy this DECKEL MAHO DMC 60 Hi Dyn vertical machining centre. Contact us for more information. Gsdpfxjx D Surj Aftekf Application Types Milling

Condition: ready for operation (used), Year of construction: 1997, Main Drive Spindle speed range 80 to 8000 Spindle motor power 5.5 kW Number of axis 3 Movement X-Axis Movement 760 mm Y-Axis Movement 460 mm Z-Axis Movement 610 mm Additional Equipment Lehman 4/5-axis dividing machine, diameter 200 mm Fully protective cabin with sliding door This 5-axis Hurco BMC 30HT/M was manufactured in 1997, featuring a Lehman 4/5-axis dividing head with a 200 mm diameter. It includes a CNC Ultimax 3 control, a tool changer with 24 positions, and a spindle speed up to 8000 rpm. The machine offers X/Y/Z travel paths of 760/460/610 mm and a rapid traverse of 24 m/min. Consider the opportunity to buy this Hurco BMC 30HT/M vertical machining center. Contact us for more information about this machine. Application Types Milling Gsdpfxex D D Rle Aftskf

Condition: ready for operation (used), Year of construction: 2000, General Data Machine weight 19000 kg Movement X-Axis Movement 4000 mm Y-Axis Movement 825 mm Z-Axis Movement 1100 mm Table Table load 4000 kg Gkodpfx Afsx D D D Eotof Turret Number of tool slots 48 Media Internal cooling Yes Additional Equipment Pneumatically opening doors Partition wall for two-field machining Ventilated measuring systems Optional: High-pressure pump (40 bar) and NC rotary table This 5-axis Matec 30 HV CNC vertical machining center was manufactured in 2000. It features a milling spindle with a speed range of 20-9,000 rpm and a drilling capacity in St 60 of 60mm. The machine boasts large travel distances with X-axis at 4000 mm, Y-axis at 825 mm, and Z-axis at 1100 mm. It supports a maximum table load of 4000 kg. If you are looking to get high-quality milling capabilities consider the Matec 30 HV machine we have for sale. Contact us for more information. Application Types Milling