Condition: reconditioned (used), Year of construction: 1999, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 1999 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 343006 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 330 electronic handwheel - Fixed table 640 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tightening system ISO 7388 - Central lubrication, electric Isdpfjub R R Ssx Ad Rotg - Coolant system - Splash guard cabin, electrically secured - Control panel on the base - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: used, Year of construction: 2012, Milling machines Travel distance X: 700 mm Travel distance Y :420 mm Travel distance Z: 380 mm HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 24000 rpm Speed range to: 24000 U/min tool changer: 38 - time Itsdpsy Nxc Nofx Ad Rjg input Power : 20 kW Integrated 4th axis (TSUDAKOMA)

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm Itjdpfoy N Du Dsx Ad Rsg T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Year of construction: 2008, condition: ready for operation (used), travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,600 mm, overall weight: 34,000 kg, total width: 11,000 mm, total height: 6,450 mm, product length (max.): 12,500 mm, spindle speed (max.): 2,500 rpm, tool weight: 25,000 g, number of axes: 5, This 5-axis SHW UFZ 6L Bed Type Milling Machine was manufactured in 2008. It features an impressive X-axis travel of 6000 mm, Y-axis travel of 2100 mm, and Z-axis travel of 1600 mm. The machine includes an automatic tool changer with a capacity for 150 tools and a robust clamping plate surface of 3600 x 3750 mm. If you are looking to get high-quality milling capabilities, consider the SHW UFZ 6L machine we have for sale. Contact us for further details. • W-axis travel: 1500 mm • Digital feed drives • X-axis: 2–20000 mm/min • Y-axis: 2–24000 mm/min • Z-axis: 2–24000 mm/min • Rapid traverse • X-axis: 20000 mm/min • Y-axis: 24000 mm/min • Z-axis: 24000 mm/min • Spindle • Head: Automatic universal milling head • Main spindle motor: Siemens 1PH7 167 • Gearbox: ZF 2K300 / SEW FF37 / FA47 B / KA Z37 • Repeatability: ±0.002 mm • Spindle Speed (60 min Max): 3200 rpm • Spindle Speed (15 min Max): 4000 rpm • Tool changer • Type: Automatic • Capacity: 150 tools • Max tool length: 400 mm Isdpfx Aey Nzdced Rstg • Max tool weight: 25 kg • Tool taper: SK50 DIN 69871 • Station: Pickup-station • Table/plates • Clamping plate surface: 3600 x 3750 mm • Electronics and control • Control panel: Integrated CNC in work platform • Servo motors: Siemens 1FT6 series • Drives/regulators: Indramat ECOdrive 3 • Measuring systems: Heidenhain LS 186C / LB 382C / ROD 480 / ROQ 425 • Electronic pressure switch: ifm PN 5, PN 7 • Power supply • Voltage: 400 V, 3-phase, 50 Hz • Power connection: approx. 80 kVA • Main fuse: 160 A (slow-blow) • Conductor cross-section: 70 mm² • Pneumatics and hydraulics • Pressure: 4–6 bar • Connection: G1/4 • Air consumption: approx. 320–400 l • Valve terminal: Festo CP10+ • Hydraulic system: Bosch with 1 x 50 l accumulator Additional equipment • CNC rotary table unit: Demmeler DRTN • Table surface: 2000 x 1800 mm • Max rotation speed: 4 min^-1 • Collision monitoring: Brankamp Typ CMS (1-channel) • Safety brake: Mayr Typ 891... • Cooling unit: Schimpke DK 38 V / BKW SK 250D • Coolant filter: Knoll KF110/1100 • Oil filter: ARGO D 062-156 • Chip conveyor: Richter SP 250/63 (x2) • Measurement system: m&h 20.10 Set Multi SK50 / m&h 35.10 TS plug • Lubrication: Automatic • Machine enclosure: 3-sided Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2007, x-travel 2.000 mm Itodpfey Nfbrox Ad Reg y-travel 800 mm z-travel 1.000 mm Control Heidenhain iTNC 530 spindle tunring speed 4.500 U/min tool taper SK 50 number of tool places 20 Pos. table surface area 2.000 x 700 mm max. table load 4.000 kg weight of the machine ca. 11.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: like new (used), Year of construction: 2018, operating hours: 200 h, XYZ 500 LR Vertical Machining Centre (2018) Siemens 828D Control with Shop Mill, Optimised Digital Servo Drives, Rigid Tapping,Flood Coolant, Worklight, 12 Station Carousel ATC, Easy Clean Swarf Tray, Steel Concertina Guards on all axes, Powder Coated Guarding, Pull Studs, USB Port Technical Specification: X Axis Table Travel: 500 mm Y Axis Table Travel: 400 mm Z Vertical Travel: 440 mm Table Size: 580 × 400 mm Spindle Centre to Column: 415 mm Spindle to Table: 100 – 550 mm Column Front to Table Centre: 215 – 615 mm Rapid Feedrate: 20 m/min Cutting Feedrates: 1 – 20,000 mm/min Max Table Load: 250 kg Spindle Speeds: 5 – 8,000 rpm Spindle Motor: 15 kW (20 hp) Spindle Taper: BT40 Toolchanger: 12 station carousel Toolchange Time: 8 seconds Max Tool Diameter: 100 mm Max Tool Weight: 7 kg Ijdpfxjy R S Uns Ad Rotg Coolant Tank Capacity: 105 L Ballscrew: Grade C3, 28 mm dia P8 AC Digital Servo Motors: X = 8 Nm, Y = 8 Nm Max Torque Z Axis: 12 Nm, 3,000 rpm Machine Weight: 2,400 kg Footprint: 1,890 × 1,982 × 2,700 mm *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79114 Machine Serial Number: SMB0146 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2015, operating hours: 300 h, XYZ 560 Mini Mill 3 Axis Vertical Machining Centre Manufactured 2015 Siemens 828D Control Ex college machine less than 300hrs. Spindle Speeds 8000rpm Spindle Motor 15hp Spindle Taper BT40 Tool Magazine 12 Tools Tool Change Time 8secs X Axis Travel 560mm Y Axis Travel 400mm Z Axis Travel 500mm Ijdpfx Adoy R Srgo Rstg Table Size 610 x 370mm Spinde to Tabel 100 – 600mm XYZ Rapids 20m/min Cutting Feeds 1-20m/min Max. Table Load 300kg T Slots 16mm Machine Weight 3100Kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79162 Machine Serial Number: MF491 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm number of spindle speeds: 63 - 3.150 1/min feed stepless: 12-3000 / 6-1500 (Z) mm/min Ijdpsk Hdu Defx Ad Retg quill stroke: 100 mm milling-head swivable +/-: 90° spindle taper ISO: SK 40 surface area: 630 x 400 mm total power requirement: 8 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2 x 1,9 x 1,95 m universal milling machine with point to point control, mechanical handwheels, swivel - rotary table (mech.) +-45°, hydr. tool clamping, half cabin, coolant device, manuals (German language) *

Condition: excellent (used), Year of construction: 2011, XYZ SLV Turret Milling Machine Manufactured 2011 Spindle Motor 5 hp Spindle Speeds 70 – 3600rpm Spindle Taper ISO40 Table Size 1473 x 305mm T Slot Size 16mm T Slots 3 off X Axis Travel 1000mm Y Axis Travel 410mm Knee Vertical Travel 413mm Ram Travel 450mm Itsdpoy R Skcefx Ad Reg Supplied with: Power Feed Longitudinal (X) Power Feed Cross (Y) Powerd Knee 3 Axis Digital Readout Misc Spindle Tooling Machine Manuals Air Draw Bar We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79192 Machine Serial Number: 11501 £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, x-travel 10500 mm y-travel 1200 mm z-travel 1600 mm control Heidenhain TNC 426-CA taper ISO 50 P.D.B. Table dimensions 1100 x 12000 mm spindle speeds 20 - 2000 mm voltage 380 V Ijdeyuqlfopfx Ad Retg total power requirement 22 kW

Condition: used, x-travel 12000 mm y-travel 2000 mm Itedpfxsyuqk Ij Ad Rog z-travel 1000 mm control E.C.S. 2351 taper ISO 50 P.D.B. Table dimensions 450 x 450 mm spindle speeds 0 - 1500 mm total power requirement 35 kW Mist extraction Chip conveyor

Condition: used, Year of construction: 2003, x-travel 2.500 mm y-travel 800 mm z-travel 1.250 mm Control Heidenhain iTNC 426 spindle tunring speed 4.000 U/min tool taper ISO 50 table surface area 2.200 x 750 mm Iedpfxoy I Dg Ro Ad Retg max. table load 4.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Automatic universal milling head, 0 and 180 degrees Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 802977, travel distance X-axis: 1,020 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 240 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 60,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,900 mm, total width: 1,900 mm, total length: 2,200 mm, overall weight: 1,000 kg, DATRON M8A CNC Machining Center/Machining System - X-axis travel: 1020 mm - Y-axis travel: 800 mm - Z-axis travel: 240 mm (with tool changer, 700 mm usable on Y-axis) - Equipped with precision high-frequency spindle, speed range: up to 60,000 rpm - With direct shank clamping - Includes a wealth of accessories - Supplied with an additional plate, plate dimensions: 460 x 250 x 20 mm Itjdpfxjy Iytme Ad Rjg - Comes with milling cutters and drills, technical documentation, a dividing head, and a small tailstock, three-jaw chuck diameter: approx. 125 mm Note: The item must be picked up on a confirmed date between 16.06. and 18.06.2026, to be coordinated in advance. FCA D-22085 Hamburg – loaded onto truck

Year of construction: 2004, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 4000 mm Itodpfowlwhcox Ad Rog TRANSVERSAL TRAVEL: 1250 mm VERTICAL TRAVEL: 2000 mm RAPID FEEDS L-T-V: 20 m/min TRANSVERSAL TRAVEL OF THE TABLE: 2000 mm PALLET: 2000 x 2500 mm; 1200 rpm MAX ADMITTED LOAD: 28000 Kg HEAD: A/B AXIS AUTOMATIC ; ISO50 DIN ; 15-4000 rpm; 30 kW; 650 Nm TOOL MAGAZINE: CHAIN-TYPE ; 41 POS CONTROL UNIT: FIDIA C20 XPOWER HIGH PRESSURE COOLANT: 12 Bar ACCESSORIES: PORTABLE HANDWHEEL ; SWARF CONVEYOR ; LASER TOOL SETTER

Condition: used, Year of construction: 1994, x-travel 850 mm y-travel 630 mm z-travel 550 mm table surface area 1200 x 550 mm spindle taper SK 40 spindle turning speed range 20 - 4200 U/min spindle drive 11,5 kW quill stroke 95 mm feeds longditudinal/cross/vertical 1 - 10.000 mm/min Isdpfjy Nnxajx Ad Rotg rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min control HEIDENHAIN, TNC 426 total power requirement 21 kW weight of the machine ca. 6 t Accessories: NC-dividing unit (= 4th axis) with tailstock, make HOFMANN, model RWNC-160; vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant

Condition: used, Year of construction: 1989, x-travel 600 mm y-travel 450 mm z-travel 400 mm Itodpfxjy Nnw No Ad Rsg table-size 850 x 440 mm spindle taper SK 40 control HEIDENHAIN TNC 355 ATC 32 Pos spindle turning speed range 20 - 4000 U/min spindle drive 5,9 kW quill stroke 80 mm feeds longditudinal/cross/vertical 1 - 2000 mm/min power feed x/y/z 7200 N rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min total power requirement 12 kW weight of the machine ca. 3 t Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant

Condition: good (used), Year of construction: 2004, 1 used, well-maintained heavy NC-controlled universal console milling machine with HEIDENHAIN TNC 124 point-to-point/contour control and HEIDENHAIN HR 410 electronic handwheel, plus manually adjustable axes via hand crank. Technical specifications: Table size: 1600 x 500 mm Tool holder: ISO 50 Travel ranges: - X-axis: 1250 mm - Y-axis: 500 mm - Z-axis: 500 mm Distance between vertical spindle nose and table: 75 – 525 mm Table loading capacity: max. 800 kg 18 spindle speeds: 56 – 2800 rpm Feed range, infinitely variable: - Longitudinal and cross movement: 10 – 4000 mm/min. - Vertical movement: 2.5 – 1000 mm/min. Rapid traverse on all 3 axes: yes Drive power: 11 kW Machine dimensions (L x W x H): approx. 2520 x 2950 x 2400 mm Transport dimensions (L x W x H): 2700 x 1900 x 2400 mm Weight: 5260 kg Accessories / Special features: • HEIDENHAIN TNC 124 point-to-point/contour control • HEIDENHAIN HR 410 electronic handwheel • BAUMÜLLER AC servo drive • Universal milling head model IUG 32 A, “HURON” system, manually swivels on 2 planes • Hydraulic tool clamping vertical + horizontal, ISO 50 • Swivel-away device for vertical milling head • Vibration-free operation thanks to robust, heavily ribbed cast iron guides • Ball screw spindles for X, Y, and Z axes, climb milling possible in X and Y directions • All electrical controls on one side, on movable control panel • Clamping table with foldable chip guard, electrically interlocked • Hydraulic unit integrated in the machine stand • Central lubrication • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Itedpfx Aey Iurqsd Rsg

Condition: ready for operation (used), Year of construction: 1990, Available immediately from university surplus: Vertical milling machine LAGUN Type FVA 3 LA Year of manufacture 1990 Table 1600 x 400 mm Travel distances X/Y/Z 1600/360/420 mm Spindle mount SK 50 Automatic quill feed 127 mm Spindle speeds 28 – 1400 rpm Drive power 12.5 hp Weight 4.5 tons Extensive accessories included: collets, milling cutters, hydraulic vise Iedpsy S Rhijfx Ad Rotg Price: Euro 2,000.00 plus VAT, ex works.

Condition: used, Year of construction: 1989, x-travel 580 mm y-travel 410 mm z-travel 370 mm Spindle Speed 35-1.800 UpM total power requirement 4,5 kW Itodpfoy N D Rfox Ad Rsg weight of the machine ca. 1.700 kg

Condition: good (used), Year of construction: 2014, Table size 6000 x 1100mm, traverses X Y Z 4500 x 1600 x 1300mm, maximum workpiece weight 5000kgs, spindle taper DIN 50, toolchanger capacity 40 stations, spindle speed 5,000rpm, automatic head, swarf conveyor, Isdpfxoy Ey Rte Ad Rotg 4th axis rotary table

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 770 x 490 x 440mm, Table 1372 x 356mm, Spindle speed 5000 rpm, Isdpfxsy Ex U Do Ad Retg Spindle taper ISO40, Spindle Motor 3.75kW, ProtoTRAK SMX Control, low volt light, interlocked guards, coolant.

Condition: excellent (used), Year of construction: 2021, Table 1270 x 320mm, table load 500 Kgs Itjdpfxoy Exy Ts Ad Rjg Traverses XYZ: 800 x 508 x 575mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 7.5HP, Spindle Speeds 40-5,000rpm, Heidenhain TNC320 CNC Control,

Condition: excellent (used), Table 1,200 x 450mm, X 560 Y 510 Z 450. ISO 40 4,000Rpm, Heidenhain TNC 410 Iodpjy S T Tnefx Ad Rotg

Condition: good (used), Year of construction: 1991, Table 1,800 x 400mm, X 1,200, Y 505, Z 480mm, 44-1,320 Rpm, ISO 50. DRO, Iodpfx Adey S T Sqo Rstg

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: Itjdpfx Adsygx Hno Rjg X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!