Condition: excellent (used), Year of construction: 1996, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, table length: 12,000 mm, table width: 1,250 mm, year of last overhaul: 2025, workpiece weight (max.): 20,000 kg, New HeidenHain iTNC530 controller in 2015 New bearing in head September 2025 X/Y/Z Linear measuring system IKZ 15 Bar High pressure coolant Central lubrication Optional 2 x floorplates 6000 x 1250 x 245 mm #9240 T-28 with 5 T Slotts and 250 Jump X-Axis: 10000mm Y-Axis: 1500mm Z-Axis: 2500mm Table Length: 12000mm Table Width: 1250mm Crodpjxdcbiofx Ah Usi Table load: 20000Kg Power on spindle: 37kW Spindle speeds: 3500Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:Orthogonal 1 Degrees 2 sides° Length: 16000mm Width: 4200mm Height: 6800mm Weight: 60000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1986, longitudinal travel 1200 mm vertical movement 600 mm cross travel 450 mm table-size 1500 x 600 mm max. table load 2 t spindle taper ISO 50 spindle drive 15 kW Credpfxsxukppo Ah Uei speeds 6 - 4000 U/min feeds 2 - 2500 mm/min rapid traverse 10 m/min voltage 400 V Bed milling machine with swivable spindle to horizontal or vertical. Control: Heidenhain TNC 155. Machine has an additional horizontal 4th axe.

Condition: like new (used), Year of construction: 2007, Retrofitted: 2024 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): -10 / 990 mmDistance between columns: 2435 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10975 x 4768 x 5095 mm Accesories GuardingAutomatic tool changer: ATC30Coolant: External internal high pressure through spindleElectronic handwheel: HR-410 Sales conditions Guarantee: 6 months mechanical spare partsSale price (Ex Work): On request View all technical features Credpfeugbn Eox Ah Uoi

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed very good CONDITION Technical data: >> Year of construction 1990 Machine no. 2102-5046 Csdpfxou Um Ers Ah Usri >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electrical central lubrication >> Coolant device >> Operating instructions, spare parts plan Gojs3G About the machine : Universal milling machine Deckel FP1 built in 1990 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, functionality: fully functional, x-axis travel: 400 mm y-axis travel: 220 mm z-axis travel: 400 mm Speed range: 40 - 2000 rpm Speed steps: 18 Internal taper: SK40 Spindle head movement automatic/manual: 190 / 200 mm Clamping surface (table): 730 x 240 mm Table longitudinal travel automatic/manual: 390 / 400 mm Table vertical travel automatic/manual: 390 / 400 mm Feed range: 8 - 400 mm/min Rapid traverse: 1200 mm/min Codexugd Nopfx Ah Ujri Electronic digital display SONY Rotary table Sheet steel cabinet with 5 drawers and various machine accessories, e.g. various spare parts, tool holders, milling cutters, exchangeable table

Condition: used, Year of construction: 1995, x-travel 0710 mm y-travel 500 mm z-travel 500 mm table-size 1000 x 600 mm CNC control TNC 407 Heidenhain feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min Credexukn Sopfx Ah Uoi main drive DC 7 kW milling head -swivable +/- 90 ° total power requirement 15 kW weight of the machine ca. 3,9 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with Heidenhain TNC 407 Control.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device Codpfetwlwzjx Ah Usri >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control: SIEMENS 840D Solution Line (electrical overhaul 2017) x-travel: 7.000 mm y-travel: 2.100 mm z-travel: 1.500 mm z-travel vertical: 1.200 mm Universal milling head (orthogonal design) Swivel range of milling head holder: 340 °Grad Csdpfjxugcxex Ah Usri Swivel range of milling head: 180 °Grad Mounting cone for tools with steep taper: SK50 spindle truning speed range: 22 - 2.240 U/min Feed rate x,y and z-axis: 2 - 12.000 mm/min Rapid traverse rate x,y, and z-axis: 12.000 mm/min Drive power 100% ED / 60 % ED: 31,5 / 39 kW Clamping plate dimensions of clamping plate: 6.000 x 1.500 x 300 mm Number of T-slots: 6 T-slot distance: 250 mm max. load: 10 t/m² Equipped with: NC dividing head PEISELER AWU 650 with vertical faceplate, diameter 650 mm automatic universal milling head, orthogonal, (Completely refurbished 2017, rarely used since then) SIEMENS electronic handwheel 3 support tables various prism support blocks MAYFRAN hinged belt conveyor Coolant system with paper belt filter Work platform moving in the X direction, protective cover with viewing window The machine is in exceptionally good condition and can be viewed while under power. In 2017, a new SIEMENS 840D Solution line control system was installed, all drive motors and the control cabinet were replaced at the same time.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Tool milling machine Kunzmann WF4/3 Heidenhain digital display year of manufacture 1994 very good CONDITION!! Technical data: >> Year of manufacture 1994 >> Rigid angle table >> Speed from 40 to 2550 rpm Biojv7Igbpa Crjdpfx Aevyr R Nsh Usi >> Continuous feed in X Y Z axis from 0 to 2000 mm/min >> Travels X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis Heidenhain digital display >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the machine: Offered is a Kunzmann WF4/3 tool milling machine in very good condition. It comes from a state-owned company where it was only used a little. Converting from vertical to horizontal is very easy, by folding away the vertical head. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power.

Condition: good (used), Year of construction: 1972, functionality: fully functional, travel distance X-axis: 290 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, overall weight: 1,200 kg, x- travel: 290 mm y-travel: 170 mm z-travel: 310 mm Credpfx Ahexugbus Uoi Milling spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40-2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 mm dimensions: 1066 x 1048 x 1330 mm

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP2 in special paint finish light gray with 3-axis digital display K+C NEW Technical data: >> Machine no. 5983 Year of construction approx. 1975 >> Rigid angular table (newly revised) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2,2 KW >> Travel X/Y/Z: 400/200/400 mm Crjdpfx Aheu I Rm Ns Uji >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital display K+C Newly assembled with manufacturer's warranty. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Operating instructions for digital display >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 in good condition. The Deckel has very little crank play and all spindles can be moved easily. The machine has been completely dismantled and repainted. An oil change has been carried out. Mechanically and electrically tested. The digital display from K+C makes work easier and even more accurate. You also have a 1 year guarantee on the new digital display. Take the opportunity to inspect and try out the lids on site under power. The machine is available immediately.

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Crodjxuf T Ajpfx Ah Usi Millung spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Vertical milling head inner taper of milling spindle: ISO 40 spindle turning speed range: 50 - 2.500 U/min max. diameter of the vice bore: 25 dimensions: 1.100 x 1.100 x 1.660 mm

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3 - axis digital readout Heidenhain original condition !!! Technical data: Codpfxsu Nvxmo Ah Ujri >> Machine no. 56560/08 Year of construction approx. 1975 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1,5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> S20x2 tightening system >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant device About the machine : We offer a universal milling machine Deckel FP1 in very good original condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take the opportunity to inspect and try out the lids on site under power.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display K&C infinitely variable feed in light gray Super condition Technical data: >> Year of construction 1978 Machine no. 2101-0465 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed stepless 2 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital indicator K&C Newly assembled with manufacturer's warranty and operating instructions. Credpet Aav Ijfx Ah Usi Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device To the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The machine has very little crank play and all spindles can be moved easily. The bellows are all new. On this newer FP1 model, the feed is infinitely variable in two axes and the machine also has a rapid traverse. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2867 >> Turn-tilt-swivel table (newly planed) >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. Cedjt Aarpspfx Ah Ueri >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1985 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, Universal Milling Machine Deckel FP1 repowered by FPS in year of manufacture 2010 with 3-axis digital display Heidenhain ND 780. Like new!! Technical Data: >> Machine no. 2101-51084 Year of manufacture 2011 >> Fixed angle table >> Speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 KW >> Travel range X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic vise >> Collets >> Tool holders Csdpowpi Dqjfx Ah Usri >> Milling cutters >> Operating manual >> Coolant device About the machine: A universal milling machine Deckel FP1 repowered by FPS is being offered in like-new condition. The accessories include a hydraulic vise with rotary table, collet tool holder, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to inspect and try out the Deckel on-site under power. The machine is immediately available.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Overhauled TOP Cedpfxsvb Ud Ue Ah Ujri Technical data: >> Machine no. 53819/08 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1.5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill - SK40 >> Spindle brake >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display from RSF Elektronik >> Coolant device >> Machine feet To the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. The FP1 was overhauled by Huttelmaier in 2006 and has been used very little since then. The digital display from RSF makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed Super CONDITION Technical data: >> Year of construction 1984 Machine no. 2102-2601 >> Turn-tilt-swivel table >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm Crodpfx Ahju Racre Uei >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: Dpbyzb >> 3-axis digital display Heidenhain TNC113 >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1984 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, F729 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed very good CONDITION Technical data: >> year of construction 1992 machine no. 2102-6289 >> Rigid angle table (newly planed) >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 Bmbwuweo9T3 >> Coolant device >> Operating instructions, spare parts plan Codpsu T D Nrsfx Ah Usri To the machine : We offer a Deckel FP1 universal milling machine built in 1992 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: Cjdpfxou Nvwvj Ah Usri >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, Universal Milling Machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780 — As new condition! Technical specifications: >> Machine No. 55249/08, year 2010 >> Fixed angle table >> Spindle speed: 40–2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories & features: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system Csdpfxsxu Hbhs Ah Uori About the machine: For sale is a Universal Milling Machine Deckel FP1, repowered by FPS, in like-new condition. Included in the scope of delivery are the hydraulic vice with rotary base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel on site under power. The machine is available immediately.

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Universal milling machine Deckel FP2 with 3-axis active TNC 113 digital display Heidenhain and infinitely variable feed in TOP condition Technical data: >> Year of construction 1979 Machine no. 2202-10777 Credpsuc Ubwofx Ah Uji >> Rigid angle table (newly planed) >> Speed: 25 - 2500 rpm >> Feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:2,2 KW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be moved 150 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system S20x2 >> Weight approx. 1400 kg Accessories and equipment: >> 3 axes TNC 113 active digital display Heidenhain >> Coolant device >> Central lubrication To the machine : We are offering a Deckel FP2 universal milling machine in very good condition. The FP2 comes from a laboratory of a state-owned company where it was used very little. The machine has very little crank play and all spindles can be moved easily. The milling machine runs smoothly even at maximum speeds. On this newer FP2 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine on site under power.

Condition: like new (used), Year of construction: 1987, functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed Mint CONDITION Technical data: >> Year of manufacture 1987 Machine no. 2102-3536 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Machine lamp >> Coolant device >> Operating instructions, spare parts plan About the machine : Ccbroxg Universal milling machine Deckel FP1 built in 1987 in mint original condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site. Cjdpfx Ahou R D I Ss Uori

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine no. 2102-5231 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle carrier >> Vertical and horizontal quill - SK40 >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Central electric lubrication >> Coolant system >> Operating manual, spare parts diagram About the Machine: Offered is a Universal Milling Machine Deckel FP1 in very good condition in light grey. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. In this newer FP1 model, the feed is infinitely variable in all three axes; in addition, rapid traverse is available in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain positioning control, you can input dimensions that the machine will automatically move to. The FP1 was previously used in a training workshop, where it was only operated occasionally. The oil has been changed. Mechanically and electrically inspected. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to view and test this exceptional machine under power on site. Cjdpfx Aoxu E R Ish Uori The machine is available immediately.

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture: approx. 1975, Machine No. 0681 >> Swivel and tilting table (recently overhauled) >> Speed range: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Features: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Equipment and Accessories: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are nearly new. The swivel and tilting table is as new. An oil change has been carried out. The machine has been mechanically and electrically tested. The digital readout makes work easier and more precise. Take advantage of the opportunity to inspect and test the Deckel on-site under power. Cedexu E I Hopfx Ah Ujri The machine is immediately available!!!