Condition: like new (used), 4 x Depth Clamps, Type 6490-14 Duobov Tmgfs Hcv Sbjt Width = 40 mm Length = 80 mm Groove Width = 14 mm Thread = M10

Condition: used, Year of construction: 1999, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 450 mm total power requirement: 35 kW weight of the machine ca.: 6,5 t table-size: 600 x 370 mm tool taper: ISO 40 tool diameter: 80 mm tool length - max.: 250 mm no. of tools in magazin: 30 speeds: 12.000 U/min feed power: 6000 N kp power capacity: 9,0 kW 5-Axis CNC Milling Machine Spindle: 15113h Duob Hcvot Rmffe Sbot *

Condition: excellent (used), Year of construction: 2004, travel X / Y / Z: 450 / 300 / 350 mm Deboguu Iwj Hcv Sbeut table size W x D: 800 x 400 mm quill stroke: 105 mm spindle speed: 63 - 3150 rpm / 18 steps tool holder: ISO 40 / DIN 69871 accessories: coolant unit, machine manual, machine light weight: approx. 1350 kg dimensions W x D x H: approx. 1500 x 1590 x 1690 mm This machine is the same machine as the manufacturer EMCO, model FB-4.

Condition: used, Year of construction: 1985, Technical details: x-travel: 1000 mm y-travel: 700 mm z-travel: 625 mm tool taper: SK 50 control: Heidenhain TNC150 (3-Achsen Bahnsteuerung) quill stroke vertical: 115 / 100 mm table swivelabel +/-: je 45 ° spindle turning speed - continuous: 36 - 1800 / 18 step U/min spindle head swivable left - right: 45°=360° + 90°=360° ° feed continuous: 2 - 2000 / steples mm/min rapid traverse: vert./horiz.: 2000/4000 mm/min table surface area: 1400 x 650 mm table - tiltable: 30 Grad max. table load: 800 daN (ca. 800kg) distance spindle center to table: max. 670 mm Total power requirement: 30 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 2,4 x 2,1 x 2,8 m dimensions electric cabinet LxWxH: 0,52 x 1,65 x 2,0 m Spindle head projection = 350mm equipped with: Coolant device hydraulic system 3-way measuring system Heidenhain 4x machine feet (height adjustable) Accessories: Dividing table manufacturer Walter RIW 250 TG. Ø 250mm Support bearing extension 530mm Dsb Hcsvc Avzjv Sbeut *

Condition: used, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 11 main spindle: turning speed range - main spindle 40 - 4000 min/-1 tool taper SK 40 swivellable +/- 90 ° quill stroke 80 mm In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Accessories: Dusbovdt Uqs Hcv Sbjt - Cabin Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: reconditioned (used), Universal tool milling machine Make: harich (DECKEL) Model: B (FP 2) stepless reconditioned with CE geometric acceptance with test report with guarantee Accessories: - 3-axis digital display FAGOR Innova 30i-M - fixed table or universal table - vertical milling head SK 40 - central lubrication, manually operated - coolant system Dueb Hcjvfdatjv Sbjt - operating instructions CE and safety equipment: - new machine electronics with control cabinet - cover cap on the vertical milling head with electrical protection - chuck protection hood with electrical protection - drive motor with braking function - control panel with emergency stop, release, start and stop buttons, potentiometer for feed control - new documentation for machine and control cabinet - CE declaration of conformity

Condition: like new (used), 4 pieces, Duob Hov Tlvlecv Sbet Type FL10-013, Width = 44 mm Length = 112 mm Groove width = 14 mm Thread = M12

Condition: used, Year of construction: 2007, x-travel 480/500 mm y-travel 230/250 mm z-travel 380/400 mm speeds 45 - 2240 U/min table surface area 1000 x 250 mm tool taper SK 40 control HEIDENHAIN TNC 124 total power requirement 3 kW weight of the machine ca. 1550 kg Dusb Hcv Sjt Tqw Djbjt dimensions of the machine ca. 2600 x 2200 x 1800 mm - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours - Machine light - Machine feet - Operation manual

Condition: like new (used), Temperature range: 10 - 40 °C Power consumption: 2750 W / 9 A Dueb Hcerypcajv Sbst As good as new, never used

Condition: used, Year of construction: 1991, Technical details: x-travel: 1050 mm y-travel: 600 mm z-travel: 650 mm range of revolution per miute: 40 - 1720 / 12 step U/min spindle taper: SK 50 Dsb Hcv Ssva Hd Robjut spindle head swivable left - right: 90° re/li und 45° = 360° ° distance spindle nose and table: 0 - 600 mm table surface area: 1700 x 470 mm feed continuous: X/Y= 15 - 625 + Z= 7,5 - 312 mm rapid traverse Z-axis: 1250 mm/min. rapid traverse:: X/Y: 2500 mm/min. total power requirement: 11,1 kW weight of the machine ca.: 2500 kg machine dimensions LxWxH: ca. 2,45 x 2,0 x 2,85 m Equipment: with Huron universal milling head coolant system control panel machine feet Accessories Machine vice (jaw width 120mm) *

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected Dob Hcv Ssvduahebsut under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, feed length X-axis: 500 mm, feed length Y-axis: 430 mm, feed length Z-axis: 400 mm, For sale is a package of four identical Hermle UWF 801 milling machines. Two of the machines have minor defects that require repair, while the other two are fully functional. This package is offered, but individual machines are also available for sale at the regular price. Technical specifications: X-travel: 500 mm Y-travel: 430 mm Z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 step mm/min Feed: Z: 4 - 1000 step mm/min Rapid traverse: X+Y: 1.6 m/min and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Approx. weight: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Tool holders, tools, and vice are not included in the package. However, they can be offered individually. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? Dusb Hcv Sov Tc Apobet For further information or to contact us, visit our website.

Condition: used, Year of construction: 2005, Features: - SK40 spindle - Max. speed 18,000 rpm - 24 tool changer pockets / "bread drawer" Duebov Tn Ikj Hcv Sbot - Swivel head and rotary table

Condition: like new (used), Year of construction: 2016, operating hours: 8,900 h, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 18,000 rpm, overall weight: 7,000 kg, Selling a well-maintained 5-axis simultaneous machining center Hermle C12U with a PW100 6-way pallet changer and a Heidenhain TNC640 control! Spindle was replaced on 02/2024! Travel paths: X: 350mm Y: 440mm Z: 330mm Swivel range: +/- 115 degrees Rotation range: 360 degrees Equipment: Control: Heidenhain TNC 640 incl. Dynamic Efficiency incl. Dynamic Precision Control panel standard right Tool changer: 71-way 36 standard + 35 in additional magazine Linear axes standard version NC swivel rotary table STP diameter 320mm PW100 Automatic cabin roof including side part Hydraulic and pneumatic extension Pallet changer PW100 6-way left 320mm x 320mm Scraper belt conveyor right Laminated glass safety windows Fluid box doors KinematicOpt. Hardware HIMS- Hermle information and monitoring software Event messenger Condition monitoring Spindle 18000 rpm Spindle mount: HSK-A63 System control IKZ 80 bar including paper belt filter and police filter Locking air for the scales Vario pressure relief valve Blow-off device Blowing air through the center of the spindle Chip flushing gun Electrical heat compensation Electrical handwheel Heidenhain measuring probe Dsb Hsvzrihjcv Sbeut Blum tool break/measurement A2 Signal light including warm-up function Accessories: 7 pallets, 6 of which with Gressel center clamp and 1 with three-jaw chuck Machine is available immediately!

Condition: good (used), Travel X / Y / Z: 475 / 330 / 280 mm Table size W x D: 650 x 250 mm Quill stroke: 60 mm Spindle speed: 63 - 2800 rpm / 12 steps Mounting cone: ISO 30 / DIN 2080, ISO 40 / DIN 2080 Weight: approx. 950 kg Machine size W x D x H: approx. 1100 x 1400 x 1600 mm Spindle bore: 17.8 mm (24.8 mm) Movement range: Longitudinal travel. table: 330 mm Table: 330 mm* 1 handwheel rotation: 5 mm Vertical travel: Deb Hod Dgdyjcv Sbout Console: 475 mm* 1 handwheel rotation: 2 mm Transverse travel: Milling spindle carrier head: 400 mm 1 handwheel rotation: 5 mm *These two directions of movement are provided with automatic feed and can be controlled by programs. Shortest cycle time 15 seconds, or 4 program sequences per minute. Reading accuracy at the scale drums: 0.02 mm Main motor: Milling head 2 speeds Engine: 1.1/1.5 kW, 1500/3000 rpm Automatic feeds: Rapid speed motor: 0.55 kW, 1000 rpm Rapid traverse lengthwise: 2500 mm/min Rapid traverse vertical: 1000 mm/min Working feed motor: 0.2 kW max. Control range in longitudinal direction 4 - 500 mm/min Control range in vertical direction: 1.6 - 200 mm/min Coolant device: Engine: 0.15 kW, 3000 rpm Coolant pump capacity: 20 l/min Coolant tank capacity: 30 l

Year of construction: 2002, Condition: used, electr. connected load 3x400V / 50 HZ installed capacity: 84 KVA amperage - max. max. 120 A Required air-pressure min. 5 bar In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Dujb Hcjv N Ranov Sbjt Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), A lot of accessories, is only offered completely! Travel X / Y / Z: 300 / 300 / 135 mm Table size W x D: 700 x 190 mm Duob Hjd Erqbecv Sbot Spindle speed: 95 - 6000 rpm / 11 steps Tool holder: W 20 Weight: approx. 450 kg Machine size W x D x H: approx. 900 x 900 x 1500 mm Accessories: Swivel table Round table Ø 200 mm 6 shots Various collet chucks and clamping devices Horizontal milling device work lamp coolant system vice

Condition: used, Year of construction: 1986, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 4 In our opinion, the machine is in very good used condition and can be viewed under power by appointment. Duebjvtgwko Hcv Sbet including round table Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Year of construction: 1980, - Table size: 1250x350 mm Dujb Hcvjdux Hge Sbst - Travels X / Y / Z: 850 x 250 x 470 mm - Spindle mount: ISO40 - Spindle speeds: 45-2000 rpm. / à 24 steps - Horizontal and vertical spindle in the same milling head - Swiveling in the head: +/- 90 ° - Gear bar displaceable (Y axis) - digital display Heidenhain (3 axes) - Coolant pump - div. on accessories - Weight: about 2150 kg - Space required: approx. 1900 x 2000 x 1700 mm

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Dobevduane Hcv Sbout Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 800 mm y-travel 600 mm Duob Hcjvdt U Rsv Sbst z-travel 550 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 400 mm y-travel 200 mm z-travel 400 mm turning speeds 2.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Dujb Hcsv Irk Sov Sbet Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2002, Condition: used, electr. connected load 3x400V / 50Hz installed capacity: 104 KVA current intensivity max. 150 A Required air-pressure min. 5 bar In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Deb Hcev N Rabov Sbjut Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2013, Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Djbov N Rbxo Hcv Sbjut if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Heidenhain TNC 355 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Debsvdt U De Hcv Sbeut Subject to changes and errors in the technical data and information as well as prior sale!