Condition: used, Tool milling machine BOHLE, swivel and rotatable milling head, XYZ display HEIDENHAIN (disconnected), according to information only limited usability Dkehxyevzhwuja R Tjl

Condition: good (used), Year of construction: 2003, operating hours: 14,807 h, overall weight: 3,545 kg, input voltage: 400 V, year of last overhaul: 2015, Operating hours approx. 02/2025: Control on: 14807 h, machine on: 76429 h, program run: 39412 h 3D path control Universal milling head with controlled B-axis SK 40 Shelf magazine with 60 magazine spaces SK 40 Infrared measuring probe, Heidenhain TS 641 NFS server Chip conveyor, Blechtechnik GmbH Dshxjv Ab Rkoya R Tjkl Cooling with extended media line, Bürener Maschinenfabrik GmbH The blue computer terminal in the picture in front of the machine does not belong to the machine The machine is still in use and can be viewed during our opening hours. The SK40 tool holders can be purchased, the tools are not sold. Sale from location without warranty and return. Dismantling and removal must be organized by the buyer.

Condition: good (used), Clamping table, clamping angle, T-slot table, round table, milling machine table, turning table, cross table, cross-sliding table, boring table Dkohxyajpyk Ize R Tsl -Manufacturer: Scharmann, clamping table drilling table rotatable -Table surface: 1400 x 1000 mm -Travel distance: 1200 mm -Grooves: 7 pieces 22 mm -Dimensions: see photo -Total dimensions: 3410/1350/H665 mm -Weight: 4600 kg

Condition: good (used), Year of construction: 1971, Universal milling machine Macmon M200B (comparable to cover FP3) Year of manufacture 1971 machine no. 628/2 Traverse path X-axis 600 mm Y-axis travel 310 mm Z-axis travel 390 mm Speed range 37-1900 rpm Feed in 3 axes from 7-380 mm/min Rapid traverse in all 3 axes Vertical & horizontal spindle Vertical quill and horizontal quill extendable - SK-40 Tightening system S20x2 Rigid clamping table Dkshsqup Agjxya R Tjl Coolant device Operating instructions 3-axis Fagor digital readout (X scale counts double) The machine has been technically checked and is fully functional. Spindle runout 0.002mm X-axis backlash 0.75mm Y-axis backlash 0.7mm Backlash Z-axis 0.2mm Installation area LxW: 1500x1500mm Weight approx. 1500kg

Condition: ready for operation (used), Travel X/Y/Z: 600mm/400mm/500mm, speed: 5000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 3900mm/2900mm/2000mm, weight: approx. 3600kg, control: Maho CNC 432, operating hours: 47333h. On-site inspection is possible. Dkohxya Rjvyr Nro Tel

Condition: like new (used), Year of construction: 1996, Universal Tool Milling Machine from Deckel ( Germany ) apply for toolmaker , mold maker, education and Locksmith Travel : 340x160x340mm Speeds : 40-2000 U/min Taper : SK 40 Table 600x210mm Dkohxya Rsgufhfe Tel Travel (X,Y,Z -Achse) 300x140x340mm Spindle: SK 40 Speeds 40-2000U/min Feeds 2-2000 Power supply 50 Hz 3x 380V Motor 1,8KW Weight ca. 700kg Dimension 1000x1600x1000mm

Condition: new, Year of construction: 2022, Functionality: fully functional, 5-axis CNC machining center for processing carbon and glass fiber workpieces, plastics, Ureol, wood. Availability: approx. 4 weeks Machine details: CMS ARES 3618 - Axis travels: X-axis: 3,600 mm Y-axis: 1,800 mm Z-axis: 1,200 mm B-axis: +/- 120 ° C-axis: +/- 270 ° - Universal tool head (12 kW | max. speed: 24,000 rpm) - Tool magazine: 8-station in-line magazine moving in X-direction Dkohxyasiqnzze R Tol - Tool holder: HSK 63F - CNC control: Fanuc 31 IB5 - Vacuum system: 2 x 100 m³/h - Work area cover, pendulum operation, tool measuring system, dust protection, ... Additional services: Installation, commissioning, training possible!

Condition: like new (used), Year of construction: 2008, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 2800 x 1000 mm Number of T slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 1000 mm Z axis traverse: 1500 mm Milling head Head type: Auto-indexing head UDG (every 2,5º) Tool clamping system: Hydraulic Dkshxou S Sq Usya R Tjl Taper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872 Speed range: 3000 rpm Spindle power: 22 kW Feedrates Feedrates: 5000 mm/min Rapid feedrates (X-Y-Z): 20000 mm/min Weight and dimensions Maximum weight on table: 6000 kg Machine weight approx.: 20000 kg Machine dimensions approx.: 7750 x 4400 x 3100 mm Accesories Guarding New automatic tool changer: ATC-30 Longitudinal rear chip conveyor Electronic handwheel: HR-410 External coolant and high pressure through spindle Sales conditions Warranty: 6 months mechanical parts Sale price (Ex Work): On request View all technical features

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine Dkehxya Rsnzpx Ro Tol -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: excellent (used), Year of construction: 1979, machine/vehicle number: 2202-10706, Deckel FP2 Aktif toolroom milling machine in very good TOP condition. Machine Nr.2202-10706 Specifications: - Machine speed: 25 - 2500 rpm - Power feed X/Y/Z infinitely variable 5/500mm/min Dkohxyajvwczts R Tel - Rapid feed X/Y/Z 1500mm/min - X / Y / Z: 400/200/400 mm - Spindle brake - Spindle nose vertical and hor. SK40/M16 - Weight about 1300 Kg Accessories and equipment: - 3-axis Aktif digital Heidenhain TNC113 - coolant system - Central lubrication - machine books Offered is a universal milling machine Deckel FP2 Aktif, in very good TOP condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs very quietly. All guideways are in very good condition. In this newer FP2 model the powerfeed in three axes is infinitely adjustable, the machine has also rapid traverse in three axes. The machine is mechanical and electrical complete tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Year of construction: 1992, Condition: ready for operation (used), Travel X/Y/Z: 1000mm/150mm/200mm, table dimensions X/Y: 1300mm/300mm, speed: 6000rpm, tool positions: 8, control: Siemens Sinumerik 810, weight: approx. 3200kg. Coolant system included. Documentation available. On-site inspection is possible. Dehjvyirqexya R Tskl

Condition: excellent (used), Control unit new Spindle replaced 400 hours ago X axis 1200mm Y axis 600mm Z axis 850mm Tool changer 24 times 4 and 5 axis available maximum 80 operating hours Year of construction 2001 Speed 9000 Internal cooling 32Bar Accessories 3D infrared probe various milling cutters Clamping device 250 SK 40 holders Djhxya Rot Sxirj Tekl Tool presetting device (measuring system)

Condition: new, The Duplex stops allow angle cuts from 0-90° very quickly, precisely and continuously. When set to 45°, the miter can be cut on both sides of the workpiece without adjusting the two stops. The dimensions are set using a magnifying glass and a measuring scale for length compensation. All DUPLEX variants can be easily positioned along the entire length of the carriage. No. M64060 Dohxyaovyup Ie R Tjkl

Condition: excellent (used), Used SCHAUBLIN 53 milling machine - Table dimensions: 1100 x 305 mm. - Travels: X=700 - Y=490 - Z=250 mm. Dkohxyaovx Atls R Tjl - Spindle taper: ISO 40 - Spindle speed: 3000 rpm. - Number of feeds: 18 - Feed X, Z: 12 mm/min to 1050 mm/min. - Rapid feed: X=3.5 m/min - Z=1.7 m/min. - Total installed power: 7.5 HP. - Machine dimensions: 1800 x 1600 x H1700 mm. - Weight: approx. 2100 KG

Condition: ready for operation (used), Immediately available from the customer's factory (machine in use) Subject to prior sale and availability PLATE-EDGE-MILLING-MACHINE / PLATE-EDGE-MILLING-MACHINE PLATE-EDGE-MILLING-MACHINE MADE BY / MADE BY MODEL / TYPE YEAR OF PRODUCTION/ NEW 1984 approx./approx ZUSTAND/CONDITION Betriebbereit / ready for use LIEFERZEIT / DELIVERY-TIME SOFORT / IMMEDIATELY Längsvefahrweg X Travel longitudinal X 15,900 mm Horizontal feed Z Horizontal travel feed Z 790 mm Vertical feed Y Vertical travel feed Y 500 mm Swivel range of milling spindle Swivel of milling spindle +/- 45 °/degrees Drive power Power 50 kw Milling spindle diameter Milling spindle dia 160 mm Tool holder Taper ISO 50 DIN 2079 Spindle speeds stepless Spindle speeds stepless 50-500 rpm Dkohxyajvdx S Ue R Tsl Weight of machine Weight of machine 23.000 Kg

Year of construction: 2003, Condition: ready for operation (used), Travel X/Y/Z: 3000mm/800mm/1100mm, rapid traverse X/Y/Z: 30m/min, feed X/Y/Z: 30m/min, spindle type: DMS 112, speed: 12000rpm, power: 30kW, torque: 190Nm, tool holder: HSK 63 A, tool positions: 48. Drilling capacity steel: approx. 60mm, milling capacity: approx. 500cm³, tapping capacity: M30, head tilt: +/-90°, table dimensions X/Y: 3500mm/835mm, face plate diameter: 630mm. Machine dimensions X/Y/Z: approx. 7000mm/6000mm/4000mm, weight: approx. 15000kg, control: Bosch type 3 Osa. Including 70bar internal coolant supply, chip conveyor, loading doors for crane loading, 3D radio measuring probe, direct measuring systems for X/Y/Z, cooling unit and other accessories. Documentation available. On-site inspection is possible. Dohxyovyirdsa R Tskl

Year of construction: 1990, Condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/400mm, feed X/Y/Z: 3m/min, table dimensions X/Y: 900mm/530mm, tool holder: ISO40, speed: 4000rpm, machine dimensions X/Y/Z: approx. 2600mm/1800mm/2200mm, weight: approx. 2600kg, control: Heidenhain TNC 355, operating hours: 57765h. Including 3D probe, 20x holders, spray protection cabin and coolant pump. Documentation available. On-site inspection is possible. Dkjhxya Rsvx Tw Is Tol

Year of construction: 2010, Condition: ready for operation (used), X-travel: 2520mm, y-travel: 3520mm, z-travel: 160mm, table dimensions: 2500x3500mm, control: CNC Microstep 980, length: 4320mm, width: 3100mm, height: 1820mm, weight: 900kg, including production computer with flat screen and Cenon CAM software, combination cutting/folding device, dust extraction device, industrial vacuum cleaner (1200W, 36l container volume), cooling and spraying device, automatic Z-adjustment, control cabinet, control and simultaneous interpolation of up to 5 axes, true 3D machining possible, continuous path with dynamic, pre-calculation, high machining speed exponential acceleration ramps, 4 digital outputs, 4 digital inputs, spindle interface (digital and analog), connection options are spindle controller, electronic workpiece leveling, automatic Z-adjustment, automatic tool change, automatic tool change, automatically switched tool cooling, safety device, control panel, on-site inspection is possible. Dkehxeriwd Nsya R Tol

Year of construction: 1997, Condition: ready for operation (used), Tool length: 250mm, max. tool weight: 6kg, control: Heidenhain CNC 234, connected load: 40kVA, machine dimensions (LxWxH): 4700mm/4100mm/2300mm, weight: approx. 2.8t, operating hours: 43,408h. The guide rail of the front door is broken. Documentation available. An on-site inspection is possible. Dohxoulzlcsya R Tjkl

Year of construction: 2019, Condition: ready for operation (used), Travel X/Y/Z: 1100mm/560mm/510mm, rapid traverse X/Y/Z: 36m/36m/30m/min, table-spindle distance: 120mm-630mm, table dimensions X/Y: 1400mm/560mm, max. table load: 1000kg. Speed: 12000rpm, spindle power: 15kW, spindle mount: CAT40, tool positions: 30, machine dimensions X/Y/Z: approx. 3200mm/2750mm/2950mm, weight: approx. 5500kg, operating hours: 2049h, spindle hours: 716h, control: DMG Mori SLIMline with Siemens 840D SL. Including chip conveyor, oil mist separator preparation, direct path measuring systems X/Y/Z, measuring probe kit for Siemens control. Documentation available. On-site inspection is possible. Dkshxyaeuk I Eys R Tel

Year of construction: 2013, Condition: ready for operation (used), Travel X/Y/Z: 2000mm/1000mm/650mm, axes: 5, spindle power: 10kW, speed: 27000rpm, control: Siemens Sinumerik 840 DSL, weight: approx. 7000kg. An on-site inspection is possible. Dohxyougmxisa R Tekl

Year of construction: 1994, Condition: ready for operation (used), A Hebrock edge milling machine is available. Workpiece height range: 10mm-50mm, max. edge thickness: 1mm, min. workpiece width: 50mm, min. workpiece length: 170mm, feed speed: 4m/min, connected load: 3kW. Machine dimensions X/Y/Z: approx. 1750mm/700mm/1250mm, weight: approx. 120kg. On-site inspection is possible. Dkehxya Rovva H Do Tel

Condition: ready for operation (used), Travel X/Y/Z: 400mm/300mm/400mm, speed: 2000rpm, spindle mount: SK40, feed: 380mm/min, rapid traverse X/Y/Z: 1200mm/min, table dimensions X/Y: 320mm/750mm, quill stroke: 80mm, milling head tilt: +/-90°. Machine dimensions X/Y/Z: approx. 1800mm/1200mm/1200mm, weight: approx. 1300kg. On-site inspection is possible. Dehxya Rovripte Tokl

Year of construction: 1990, Condition: ready for operation (used), Travel X/Y/Z: 600mm/450mm/500mm, spindle mount: ISO40, spindle speed: 3150rpm, feed: 3m/min, rapid traverse: 4m/min, connected load: 21kVA, weight: approx. 3300kg, operating hours: 29189h. Documentation available. On-site inspection is possible. Dehsvg Hlnoxya R Tokl

Year of construction: 1991, Condition: ready for operation (used), X-axis: 1600mm, Y-axis: 800mm, Z-axis: 800mm, tool holder: ISO 50, speed: 20-4000/min, feed rate: 1-4000mm/min, max. rapid traverse: 10m/min, number of tool positions: 36, max. tool diameter: 160/210mm, max. tool length: 315/400mm, max. tool weight: 15kg, control: Heidenhain iTNC 530, connected load: 40kVA, machine dimensions: 5080mm/36xWxH Tool length: 315/400mm, max. tool weight: 15kg, control: Heidenhain iTNC 530, connected load: 40kVA, machine dimensions (LxWxH): 5080mm/3650mm/2005mm, weight: approx. 16t, documentation available, complete retrofit 2015. Dkshxya Rsulzk Se Tsl