Year of construction: 2008, Condition: ready for operation (used), Horizontal spindle diameter: 100mm, Horizontal spindle speed: 3600rpm, Horizontal spindle power: 25kW, Horizontal spindle torque: 920Nm, Vertical milling spindle swivel range: +/-90°, Vertical spindle diameter: 90mm, Vertical spindle speed: 3600rpm, Vertical spindle power: 25kW, Vertical spindle torque: 920Nm. Travel X/Y/Z: 1500mm/500mm/450mm, feed X/Y/Z: 4000mm/min, feed force X/Y/Z: 12kN/12kN/15kN, rapid traverse X/Y/Z: 15m/10m/10m/min. Table dimensions X/Y: 1800mm/500mm, number of T-slots: 5, center slots: 18H7, clamping slots: 18H9, center-to-center distance: 100mm, table load capacity: 2000kg. Horizontal spindle table distance: 450mm, horizontal spindle counter-holder lower edge distance: 345mm, vertical spindle lower edge table distance: 350mm-800mm, column brush vertical spindle center distance: 100mm-600mm. Machine dimensions X/Y/Z: approx. 3400mm/2900mm/2600mm, weight: approx. 5600kg, control system: Heidenhain, operating hours: 61440h. On-site inspection is possible. Dkob Heulku Holm T Tsl

Condition: good (used), Functionality: fully functional, Machine weight: 1725 kg Total machine power: 3 kW Table clamping surface: 800x400 mm Dksbsvzkzce Hlm T Tsl Longitudinal table movement - x-axis: 600 mm Transverse table movement - z-axis: 400 mm Vertical table movement - y-axis: 400 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm Working longitudinal feed - x-axis: 8-400 mm/min Working transverse feed - z-axis: 8-400 mm/min Working vertical feed - y-axis: 8-400 mm/min Rapid feed x/z/y: 2000/2000/1000 mm/min Max. workpiece weight: 400 kg

Condition: excellent (used), Functionality: fully functional, Universal milling machine Deckel FP4M with 3-axis active digital display Heidenhain in light gray Super condition !!! Technical data: >> Year of construction approx. 1990 Machine no. 2203-7487 >> Rigid angle table >> Speed: 50 - 2500 rpm Dkob Hlmevi Ipge T Tol >> Feed: 8 - 630 mm/min >> Drive power: 3.7 / 4.4 KW >> Spindle brake >> rapid traverse 1300 mm/min >> Traverse paths X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on headstock >> Vertical quill and horizontal quill - SK40 >> Vertical quill 90mm extendable >> Hydraulic tightening system >> Weight approx. 1600 kg Accessories and equipment: >> 3-axis active digital display Heidenhain >> Coolant device >> Chip tray >> Electrical central lubrication >> Operating instructions, spare parts diagrams, To the machine : We are offering a Deckel FP4M Aktiv universal milling machine in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs smoothly even at maximum speeds. The machine has hydraulic clamping. The FP4M was only used occasionally in a state-owned company for training purposes. On this newer FP4 model, the feed rate is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine approaches automatically. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine on site under power.

Condition: good (used), Year of construction: 1996, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 500 mm, X-axis / length 700 mmy-axis / transverse 550 mmz-axis / vertical 500 mmpanel dimensions 1000 x 500 mmtaler range infinitely variable in 3 switching steps 25-4200 rpm Control Heidenhain TNC 407 - TNC 415 Dksb Hlm Tjt D A Sbs Tjl

Year of construction: 2002, Condition: good (used), Hinge width 300 mm Slide-in width - / height 390 x 100 mm Insertion length 4615 mm Height from floor to lower edge of chip ejector 700 mm Hinge drive 0.37 kW Transport dimensions L x W x H approx. 5965 x 750 x 1010 mm (height without feet!) Weight approx. 500 kg Foot height adjustable yes Deb Hlmemdqx Ho T Tokl This hinged chip conveyor manufacturer TEKNICALDE model TC 1 ½ 300 was used on a CNC bed milling machine MTE Kompakt. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1979, Functionality: fully functional, Axes: X_Table travel: 3000mm Dkobouihrce Hlm T Tsl Y_CrossRail vertical travel: 1000mm Z_Milling Head - Saddle on CrossRail travel: 1500mm U_Boring Bar vertical travel: 300mm Moving Table Load: max. 20000Kg/m (uniform distribution on table surface) Moving Table usable surface: 4000x1600mm Moving Table total surface: 4900x1600mm Distance between Table and Cross Rail: max 1200mm

Year of construction: 1991, Condition: ready for operation (used), X-travel: 600mm, y-travel: 400mm, z-travel: 350mm, clamping surface dimensions: 400x800mm, width T-slots: 14mm, max. workpiece weight: 300kg, connected load: 14kW, control: Heidenhain, length: 1700mm, width: 1700mm, height: 2000mm, weight: 2t, with documentation, an on-site inspection is possible. Dkebsrm S Eis Hlm T Tel

Condition: used, Year of construction: 1985, machine/vehicle number: 294, x-travel:400 mm y-travel:190 mm z-travel:310 mm table clamping surface:280 x 750 mm Dksb Hevcf Hpjlm T Tsl Reach of the vertical spindle:115-575 mm feed steps:16 feed range:11,2-355 mm/min tool taper:SK 40 speed steps :16 speeds::56-1800 min-1 total power requirement:2,2 kW dimensions of the machine ca.:1550 x 1250 x 2000 mm weight of the machine ca.:1200 kg

Condition: used, clamping claws, clamping devices, clamping irons, clamping devices, clamps, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Bessey, clamping claws, machine table clamps, pivoting Dkeb Hleu Tyuqjm T Tel -Type: BS-5 -Wingspan: 260 mm -Number: 3x tensioners available -Price: per piece -Dimensions: 300/80/H370 mm -Weight: 3.0 kg/piece

Condition: good (used), Maho MH 600 universal milling machine Specification Manufacturer Maho type MH600 bj. unb. Axis displacement X-axis 400 mm Y-axis 210 mm Z-axis 300 mm main spindle speed 20 - 4000 rpm tool holder ISO-40 Extras Vertical head with quill Dkob Hoh A H Uislm T Tsl Various tool holders Universal table Digital display 2-axes Machine documentation Coolant set.

Condition: excellent (used), Year of construction: 1987, Functionality: fully functional, Universal milling machine Deckel FP4M with 3-axis digital display Heidenhain in special paint light gray !!! Technical data: >> Year of construction 1987 Machine no. 2203-2772 >> Rigid angle table Dkobovg Ewce Hlm T Tel >> Speed: 50 - 2500 rpm >> Feed: 8 - 630 mm/min >> Drive power: 3.7 / 4.4 KW >> Spindle brake >> rapid traverse 1300 mm/min >> Traverse paths X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved 150 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Vertical quill 90mm extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant device >> Chip tray >> Central lubrication To the machine : We are offering a Deckel FP4M universal milling machine in very good condition. The machine has little crank play and all spindles can be moved easily and evenly. The milling machine runs smoothly even at maximum speeds. Rapid traverse in all axes. A reliable and user-friendly machine. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take the opportunity to inspect and try out the machine under power on site.

Condition: ready for operation (used), Travel X/Y/Z: 850mm/280mm/355mm, table dimensions X/Y: 1250mm/315mm, feed X/Y: 800mm/min, feed Z: 250mm/min, spindle mount: ISO 50, spindle speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, weight: approx. 3300kg. On-site inspection is possible. Dkeb Hlmsvu Dfne T Tjl

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table Djb Hlm Tsb A H Rbs Tokl -Table surface: 360 x 660 mm -T grooves: 8x 12 mm -rotatable: by hand with 4x fastening screws -swivelling: via crank -Movable: via crank 200 mm -Number: 1 piece available

Condition: good (used), Year of construction: 1996, x-travel: 380 mm y-travel: 140 mm quill stroke: 40 mm table-size: 630 x 150 mm spindle taper MT: 2 Dsb Hlmsua E Naj T Tskl voltage: 380/400 V

Condition: ready for operation (used), Travel X/Y/Z: 500mm/400mm/400mm, table dimensions X/Y: 800mm/460mm, spindle mount: SK40, speed: 2500rpm, feed: 630mm/min, rapid traverse: 1.3m/min, machine dimensions X/Y/Z: approx. 2300mm/1800mm/1800mm, weight: approx. 1750kg. Including numerous accessories such as new Allmatic HD 100 vice, 16x clamping tools, 3-jaw chuck, edge finder etc. Documentation available. On-site inspection is possible. Dkeb Hlm Tjvhc R As Tjl

Condition: used, clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table swiveling Dob Hlm Teu Tlglo Tjkl -Axles: adjustable with hand crank, see photos -Dimensions total: 530/350/H450 mm -Weight: 56 kg

Year of construction: 1976, Condition: ready for operation (used), Travel X/Y/Z: 820mm/300mm/485mm, table dimensions X/Y: 250mm/1000mm, spindle mount: SK40, speed: 2800rpm, spindle head swivel: +/-45°, quill stroke: 100mm, feed: 630mm/min, connected load: 9.5kW, machine weight: approx. 1600kg. Documentation available. On-site inspection is possible. Dkob Hevur Hmolm T Tel

Year of construction: 2019, Condition: ready for operation (used), A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible. Dob Hlm Tevf Iy Ds Tskl

Year of construction: 1984, Condition: ready for operation (used), Table dimensions X/Y: 830mm/700mm, spindle diameter: 30mm, vertical stroke: 150mm, speed: 10000rpm, spindle swivel: -10°/+45°, motor power: 2.2kW, weight: approx. 240kg. On-site inspection is possible. Dkob Hevbig Djlm T Tel

Year of construction: 2005, Condition: ready for operation (used), Travel X/Y/Z: 700mm/500mm/500mm, feed X/Y/Z: 5000mm/5000mm/2500mm/min, feed force X/Y/Z: 20kN/20kN/30kN. Spindle power: 7kW, speed: 3150rpm, spindle torque: 250Nm, spindle mount: ISO40. Vertical table: dimensions X/Z: 500mm/320mm, flute width: 14H8, axis distance: 50mm, number of flutes: 5. Angled table: Dimensions X/Y: 900mm/500mm, flute width: 14H8, axis distance: 50mm, number of slots: 10, machine dimensions X/Y/Z: approx. 1820mm/2050mm/2175mm, weight: approx. 2500kg, control: Heidenhain TNC 310, probe included. Documentation available. On-site inspection is possible. Dkjb Hleulzlijm T Tel

Condition: ready for operation (used), Speed: 5000 rpm, machine dimensions X/Y/Z: approx. 3220mm/2120mm/2120mm, weight: approx. 3600kg, control: Maho CNC 432, operating hours: 33494h. Documentation available. On-site inspection is possible. Deb Hljunk N Aem T Tokl

Year of construction: 1989, Condition: ready for operation (used), Travel X/Y/Z: 500mm/400mm/350mm, rapid traverse: 4m/min, spindle speed: 5000rpm, spindle mount: SK40, max. table load: 200kg, table dimensions X/Y: 800mm/360mm. Machine dimensions X/Y/Z: approx. 2200mm/2200mm/1900mm, weight: approx. 2000kg, control: CNC 452, operating hours: 8660h. On-site inspection is possible. The function of the machine is limited, as the buffer battery on the control unit is probably empty. Dsb Hleuxdirem T Tokl

Condition: ready for operation (used), Travel X/Y/Z: 1200mm/600mm/500mm, table dimensions X/Y: 1500mm/675mm, speed: 6300rpm, tool holder: SK40, feed: 5000mm/min, spindle power: 7.5kW, machine dimensions X/Y/Z: approx. 2400mm/2500mm/2500mm, weight: approx. 6000kg. On-site inspection is possible. Deb Heu H H H Aelm T Tjkl

Year of construction: 1991, Condition: repair required (used), A defective CNC universal tool milling and drilling machine Klopp-Korradi is available. Travel X/Y/Z: 1000mm/600mm/500mm, quill stroke: 63mm, spindle center-to-clamping surface distance min./max.: 60mm/560mm, max. workpiece weight: 630kg. Table dimensions X/Y: 1300mm/700mm, groove width: 18mm, groove distance: 90mm, tool holder: SK40, spindle diameter: 60mm, max. spindle torque: 630Nm, speed: 4000rpm. Control system: Heidenhain TNC 360, power supply unit is defective. Documentation available. On-site inspection is possible. Dkjb Hjt Siazjlm T Tel

Condition: ready for operation (used), X-axis: 500mm, Y-axis: 150mm, Z-axis: 280mm, quill stroke: 55mm, throat depth: 185mm, table dimensions: 700x180mm, groove width: 12mm, weight: approx. 110kg, with base frame. Dkebsumwh As Hlm T Tjl