Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 2102-2783, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2783. Year of contruction 1985 Specifications: - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: - 3-axis actif digital readout Heidenhain TNC113 - coolant system - Automatic central greasing Dolq Dxsp Sqyus Dusut - machine books Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways disambled, checked and are in excellent condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: used, x-travel 400 mm y-travel 300 mm z-travel 380 mm table length 710 mm table width 380 mm spindle turning speed range 45 - 2240 U/min Dslqsvu Ha Us Dx Dueut spindle taper SK 40 quill stroke 90 mm pinole diameter 90 mm total power requirement 7,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,7 x 1,7 x 1,9 m Tool milling machine - Digital display - Horizontal milling device - Universal milling head with spindle sleeve - 2nd milling head (small) - Tailstock - Coolant system - Machine light - Chip tray - Emergency stop device - Documentation

Condition: used, Milling machine SCHAUBLIN 13 Dslq Devxlnlsx Dueut

Condition: used, Year of construction: 2007, Functionality: fully functional, rapid traverse X-axis: 590 m/min, rapid traverse Y-axis: 180 m/min, rapid traverse Z-axis: 320 m/min, Machine comes from a bankruptcyTECHNICAL DETAILS Quill stroke: 125 mm Travel X (longitudinal): 590 mm Travel Y (transverse): 180 mm Z travel (vertical): 320 mm Spindle/table distance: 0 - 375 mm Projection: 230 - 685 mm Table swivel range: ±45° Spindle head swivel range: ±90° Delq Dx Devb Nprsujut Table size: 1,000 x 240 mm Spindle holder: ISO 40 Spindle speed vertical: 115 - 1,750 rpm, 8 steps Spindle speed, horizontal: 60 - 1,350 rpm, 9 steps Feed range, longitudinal: 32 - 700 mm/min, 8 steps T-slot size: 14 mm MACHINE DETAILS Motor power vertical: 0.85 / 1.5 kW Horizontal motor power: 1.5 kW Machine dimensions (W x D x H): 1,500 x 1,430 x 2,100 mm Weight: approx. 980 kg

Condition: good (used), Year of construction: 2010, operating hours: 720 h, Functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 3,000 mm, Reserve price removed - guaranteed acceptance to the highest bidder.  Duslqovuzxle Dx Duot TECHNICAL DETAILS Travel path X: 2,000 mm Travel path Y: 3,000 mm EQUIPMENT - High frequency spindle - 2 x Kuka KR 210 R2700-2 / reach 2,700 mm Nominal load capacity: 210 kg / Year of manufacture 2001 + 2002 - Enclosure

Condition: excellent (used), Year of construction: 1987, Functionality: fully functional, Universal milling machine Deckel FP4M with 3 - axis digital display Heidenhain Super condition !!! Technical data: >> Year of construction 1987 Machine no. 2203-2880 >> Rigid angular table (newly planed) >> Speed: 50 - 2500 rpm >> Feed: 8 - 630 mm/min Duolqjvckyho Dx Duet >> Drive power: 3.7 / 4.4 KW >> Spindle brake >> rapid traverse 1300 mm/min >> Traverse paths X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved 150 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Vertical quill 90mm extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant device >> Chip tray >> Central lubrication To the machine : We are offering a Deckel FP4M universal milling machine in very good condition. The machine has little crank play and all spindles can be moved easily and evenly. The milling machine runs very smoothly even at maximum speeds. A reliable and user-friendly machine. An oil change has been carried out. The FP4M comes from a small business and was only used for the production of individual parts. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the machine on site under power.

Condition: good (used), Year of construction: 2007, operating hours: 21,546 h, Functionality: fully functional, machine/vehicle number: 15035711814, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, Universal milling machine DMU 70 evolution with NC swivel rotary table, measuring probe, chip conveyor and IKZ Djlq Dsvuyivjx Dujut

Condition: used, z-travel 350 mm table longitudinal travel 400 mm table cross travel 165 mm spindle stock travel 210 mm table travel vertical 350 mm Duslq Djvu Hausx Duot table-size 600 x 390 mm spindle turning speed range 40 - 2000 U/min spindle taper SK 40 control konventionell quill stroke 50 mm total power requirement 3,0 KVA weight of the machine ca. 1,7 t dimensions 1,6 x 1,4 x 1,7 m Machine equipped with: - Toolmaker's table - Coolant system - Machine feet - Operating instructions

Condition: used, Milling machine DUFOUR Dolqsvxlm Ue Dx Duout

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 Dolq Dxstrhq He Dujut CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: excellent (used), Year of construction: 2017, operating hours: 9,380 h, Functionality: fully functional, machine/vehicle number: 4455, travel distance X-axis: 3,740 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 60,000 rpm, Reserve price removed - guaranteed to go to the highest bidder. TECHNICAL DETAILS X-travel: 3740 mm Y-travel: 2800 mm Z-travel: 480 mm Control: Siemens Sinumerik ONE - HMI Operate user interface, WIN 10 Spindle speed: 60,000 rpm Spindle axis manufacturer: GMN Extraction: Ruwac Zone 22 Extraction hood: rigid or height-adjustable Dolqevuztio Dx Duout EQUIPMENT - 1 Kuka KR 420 R3300 robot / reach 3326 mm, nominal payload 420 kg - 1 Kuka KR 200 L140-2comp robot / reach 2800 mm, nominal payload 140 kg - 1 Kuka KR 140-3comp robot / reach 2400 mm, nominal payload 140 kg - Conveyor belt for transporting the scrap metal - Chip conveyor belt

Condition: excellent (used), Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Overhauled TOP Technical data: >> Machine no. 53819/08 >> Rigid angle table >> Speed: 40 - 2000 rpm Duslqsvb Ud Uo Dx Dust >> Feed 2 axes >> Drive power .:1 / 1.5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill - SK40 >> Spindle brake >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display from RSF Elektronik >> Coolant device >> Machine feet To the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. The FP1 was overhauled by Huttelmaier in 2006 and has been used very little since then. The digital display from RSF makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.

Year of construction: 2006, Condition: ready for operation (used), CME horizontal milling machine Type MB 3000 FLEX Rotary table size 1.400 x1.400 mm Max. table load 12T Longitudinal travel (X) 3.000 mm Vertical travel (Y) 2.000 mm Cross travel (Z) 1.000 mm Drill travel (W) 700 mm Rotary table (B) 360 - 0,001 degree Boring spindle dia. 150 mm Spindle speed 50-2200 rpm Spindle taper 50 ISO Spindle motor power 30 kw Dolq Dsgui Txjx Dueut Ram size 580-430 mm CNC Controller Heidenhain iTNC530 Accessories: Cooling through spindle 60 bar ATC 60 pots Hours: Spindle 27.048 hours Machine dimensions: Height 4.856 mm Length 6.663 mm Width 10.000 mm Weight 70 T Build year 2006

Condition: good (used), Year of construction: 1986, x-travel 1600 mm y-travel 1000 mm z-travel 650 mm quill stroke 125 mm spindle turning speed range 40 - 2000 U/min tool taper SK-40 table surface area 1000 x 650 mm table load 4 t rapid traverse 6 m/min feed 1 - 3000 mm/min Control PHILIPS 432 total power requirement kW weight of the machine ca. 11,5 t dimensions of the machine ca. 6,2 x 4,8 x 2,9 m The MAHO is 100% functional and can be viewed under power by arrangement. can be inspected Description: Number of axles: 5 Axle designation: X, Y, Z, B, A Speed range: 0, 40, 50, 100, 125, 160, 200, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000rpm Feed range: 0-4000 Rapid traverse: 6000 Dslq Dx Djvkqiljuout Special features: Horizontal-vertical spindle Rotary table can be set up (can be set up at different places on the table) Only fixed rotation ranges can be set

Condition: used, Milling machine DECKEL FP1 Delq Devxlmzox Dujut

Condition: used, Universal milling machine, console milling machine SIMPLON type UN-S / Universa-Super Machine. No.: 17220 Year of construction 1979 Travel X: 900 mm, Y: 240 mm, Z: 400 mm Table size 1300 x 300 mm Tool holder SK 40 - M16 Spindle speed 50 - 1750 rpm. 16 steps Feed X, Y, Z-axis 11 - 500 mm/min. Rapid traverse 2400 mm/min Motor power main spindle 4 KW Connected load 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, type VRZ 750 (X-scale missing) Dolsifu Areq Dx Dusut - Main spindle drive via 16 gear stages - Right and left rotation of the milling spindle - Vertical milling head swivels +/- 90 - Boom can be moved manually 700 mm from the milling head - Manually extendable lateral counter bearing holder with dovetail guide 450 mm - Mechanical tool clamping with M16 tightening screw - Coolant device in the machine base - Electrical control cabinet on the machine Space requirement L x W x H 1600 x 1850 x 1850 mm Weight 2400 kg Good condition

Condition: good (used), Zimmermann FZ 40 5 Axis CNC Gantry Mill Year 2002 Table 5500mm x 3000mm Max Load 30,000kg Dslju A Sxcjq Dx Duout X axis 5500mm Y Axis 3000mm Z Axis 1500mm C Axis 200 +/- deg A Axis +/- 95deg Roughing Spindle 25kw / 8000rpm / 240nm High Frequency Spindle 17kw / 23,600rpm / 13.7nm Fanuc 31i Control Distance Between Columns 4050mm Total Weight 59,000kg Footprint 9750mm x 7750mm x 5120mm

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, Universal milling machine Deckel FP4M with 3-axis digital display Heidenhain in special paint light gray !!! Technical data: >> Year of construction 1986 Machine no. 2203-2486 >> Rigid angle table >> Speed: 50 - 2500 rpm >> Feed: 8 - 630 mm/min >> Drive power: 3.7 / 4.4 KW >> Spindle brake >> rapid traverse 1300 mm/min >> Traverse paths X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved 150 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Vertical quill 90mm extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant device >> Chip tray >> Central lubrication To the machine : Duelq Dx Dovb T Ufeust We are offering a Deckel FP4M universal milling machine in very good condition. The machine has little crank play and all spindles can be moved easily and evenly. The milling machine runs smoothly even at maximum speeds. Rapid traverse in all axes. A reliable and user-friendly machine. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take the opportunity to inspect and try out the machine under power on site.

Year of construction: 1968, Condition: used, machine/vehicle number: 1623, Machine designation Horizontal milling machine Duslq Dxsbpitro Duet Stock-No. MA818 Manufacturer STEINEL TYPE SH 3,5 Year of manufacture 1968 Machine no. 1623 Weight 500kg Size W 550 x L 670 x H 1360 mm Speed of milling spindle 63 - 1250 rpm clamping surface 600 x 115 mm table width 160 mm Table travel 300 mm technical data: 380 Volt accessories: operating instructions, circuit diagrams (Changes and errors in the technical data, specifications and prices and subject to prior sale!)

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] Djlsup Hw Esq Dx Dujut - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 48894 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine no. No. 34338 Year of construction approx. 1965 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm 12 steps Motor power 1.0 and 1.5 kW pole-changing Duslq Deic R I Rjx Duet Mains connection 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, type VRZ 753 B - Spindle speed via 2 motor speeds and 6 gear stages - Feed in the X- and Z-axis - Coolant device with mechanical pump in the machine base - Pinol displacement on the vertical milling head 60 mm - Pivoting, rotating and tilting angled table - Adjacent control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm weight 690 kg good condition

Condition: good (used), travel distance X-axis: 6,626 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 2,040 mm, Mecof CNC Bed Type Milling Machine x 9000mm Table 9000mm x 2200mm Doljtv Nbbeq Dx Dusut 2 off sub tables 1000mm x 11500m. Travels X 6626mm, Y 1000mm, Z 2040mm Heidenhain 426 CNC Control

Condition: like new (used), Year of construction: 2013, Functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 Dujlq Dxovbifgo Duot >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Delq Dxou Tln Ns Dueut Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 Dslqjhik Ezs Dx Dueut CNC control HEIDENHAIN TNC 155 make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition