Condition: used, Year of construction: 1980, x-travel 700 mm y-travel 560 mm z-travel 450 mm total power requirement 3 kW Duelrijtycvteq S Hst weight of the machine ca. je 2,5 t dimensions of the machine ca. je 3*3*2,5 m Bundle 6 x KF 3 S

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed Light gray Super CONDITION Technical data: >> Year of construction 1986 Machine no. 2102-2941 >> Rigid angle table (newly planed) >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant device >> Operating instructions, spare parts plan Duslrieu S Ev Djq S Hst To the machine : B8Qguzgavc Universal milling machine Deckel FP1 in very good condition in light gray. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: as good as new (ex-display), x-travel:500 mm y-travel:350 mm z-travel:400 mm feed:10~500 (18) mm/min rapid traverse x + z axis:1200 mm/min :1200 mm/min. table surface area:800x400 horiz. mm table surface area:250x950 verti. mm table load capacity:400 kg t-slots (width x number x distance):8x14x45 main drive:3 kW weight of the machine ca.:ca. 2300 kg dimensions of the machine ca.:1820x1640x1710 mm Warranty: 12 months warranty material BRAND NEW CONVENTIONAL TYPE MILLING MACHINE > Standard accessories of milling machine: - 3-axis digital display with manifold functionalities - Vertical milling head swivel plus and minus 90 degrees, swiveling with down feed, for horizontal milling backwards - Collet chuck with collets O 4,5,6,8,10,12,14,16 mm - Short tool shank 22, 27 mm - Reduction sleeve MK1, MK2, MK3, MK4 - Chuck O 0-6 mm, 1-13 mm O - Chip pan - Arbor O 22, 27 mm Dslrog N Nhysiq S Hout - Draw bar - Anchor bolts - Coolant system - Support for horizontal milling - Work lamp - Operating tools - Operating instructions with CE conformity declaration

Condition: new, Universal milling machine Make: OPTimill Model: MT 60 Item no.: 3336090 Condition: New machine Travels: - X-axis 750 mm - Y-axis 230 mm - Z-axis 360 mm equipped as standard with - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - B 18 drill chuck holder Djlriq Ssg Anfnj Heut - Gear rim drill chuck 3-16 mm / B 18 - Reducing sleeve MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - T-nuts - Coolant device - LED lamp - Operating tool - Operating instructions

Condition: new, machine/vehicle number: 280270 0001, ADVANTAGES: compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included ICP series - with stepper motor drive and path control GENERAL CNC machines of the ICP series are further developments of the proven CPM series. The introduction of a sliding door means that the machines can now be operated from a seated position, which results in shorter cycle times for hood opening, among other things. The chassis is completely bolted together instead of welded as in the predecessors. This results in greater precision when setting up the machine, as well as improved serviceability. Furthermore, the resonance and vibration behavior has been optimized, resulting in lower noise levels. X = 400mm Y = 300 mm Z = 140 mm Diffuser = 200 mm -in use for over 40 years!!! -over 20,000 systems sold. HIGHLIGHTS compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors Duolriqelkbpzo S Hst CNC control software included Mosaic Safety Circle POPULAR MATERIAL Foam Plastics ACCESSORIES Length gauge Spindles (iFM1000ER, iFM1000WS) Quick clamping system Spannzangen Suction device

Year of construction: 1990, Condition: excellent (used), Scope of delivery as illustrated x Packing ?*?*? mm Dujlrijttu Nteq S Het Shipping weight ? kg

Condition: excellent (used), Year of construction: 1992, Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3 - axis - active digital display TNC 113 Heidenhain and stepless feed very good CONDITION Technical data: >> year of construction 1992 machine no. 2102-6195 >> Rigid angle table (newly planed) >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes Delriou Sr Rkjq S Heut >> Drive power: 1.5 / 1.9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant device >> Operating instructions, spare parts plan To the machine : We offer a Deckel FP1 universal milling machine built in 1992 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: new, Universal milling machine Make: OPTimill Model: MT 50 Item no.: 3336005 Condition: New machine Travels: - X-axis 580 mm - Y-axis 200 mm Dolriqjbnfxuj S Heut - Z-axis 340 mm serially equipped with: - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - Long milling arbor 16 mm - Mandrel long 22 mm - Drill chuck holder B 18 - Gear rim drill chuck 3-16 mm/B 18 - Reducing chuck MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - Machine light - Coolant device - Operating tool - Operating instructions

Condition: used, Year of construction: 1988, x-travel 300 mm y-travel 160 mm z-travel 340 mm total power requirement 2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1,5 x 2 x 2 m Nr. 3287 Universal tool milling machine DECKEL FP 1 Working area: 300 x 160 x 340 Control: Active digital display Drive: 1.5 kW Speed range 2000 rpm Tool holder SK-40 Rigid angled table 210 x 600 mm Documentation Optional / available on request: - Universal table - counter holder Duslriqstqp A Ee S Hot - Rotary table Ø 380mm - Dividing head

Condition: used, Year of construction: 1991, x-travel 500 mm y-travel 400 mm z-travel 400 mm Control Heidenhain TNC 113 total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2*2*2 m No. 5152 Universal tool milling machine Deckel FP 4 M (K) - 2203 Working area: 500 x 400 x 400 Drive: 4 kW Spindle holder SK 40 / DIN-2080 Speed range 50 - 2,500 min-1 Feed rates 8-630 mm/min stepless Rapid traverse 1.3 m/min Djlotqp Tveriq S Hout Fixed table 800 x 460 mm Chip tray Heidenhain TNC 113 Active Digital readout Space requirement approx. 2 x 2 x 2m Weight approx. 1,500 kg

Condition: used, Year of construction: 1983, x-travel 500 mm y-travel 400 mm z-travel 400 mm total power requirement 3 kW weight of the machine ca. 2 t dimensions of the machine ca. 2 x 2 x 2 m No. 2392 Universal tool milling machine HERMLE UWF 801 Working area: 500 x 430 x 400 mm Drive: 3 kW Control: TNC 135 With manual control: Working area 520 x 450 x 410 mm; fixed table 800 x 400 mm Tool holder SK 40 18 spindle speeds from 40 - 2000 1/min Feed stepless x,y 4 - 1600 mm/min Delotqp Uteriq S Hjut z 4 - 1000 mm/min Dimensions 2.3 x 2.3 x 1.7 m Weight 1350 kg

Condition: used, Year of construction: 1990, x-travel 300 mm y-travel 160 mm z-travel 340 mm total power requirement 2 kW weight of the machine ca. 1,2 t Duelriq Sjtqp Ayj Hjt dimensions of the machine ca. 1,5 x 2 x 2 m No. 3934 Universal tool milling machine DECKEL FP 1 Working area: 300 x 160 x 340 Control: Active digital display Drive: 1.5 Tool holder SK 40 Speed range 2000 rpm Rigid table Documentation On request / optionally available: -Universal table / fixed table - Hydraulic machine vice - Tool cabinet - Rotary table Ø 380 mm -Cutting attachment -Collets and arbors

Condition: used, Year of construction: 1988, x-travel 500 mm y-travel 430 mm z-travel 400 mm Dslrjtqp H Uoiq S Heut total power requirement 4 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2 x 2 x 2 m No. 3999 Universal tool milling machine HERMLE UWF 801 Working area: 500 x 430 x 400 Drive: 3 Control: Heidenhain TNC 135 Fixed table 800 x 390 mm chip tray documentation Spindle SK 40 Speed range 50 - 2500 min-1 Space requirement approx. 3 x 3 x 2 m Weight approx. 1400 kg

Condition: used, Year of construction: 1973, x-travel 700 mm y-travel 450 mm z-travel 450 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2 x 3 x 3 m No. 2456 Universal tool milling machine MAHO MH 800 Working area: 700 x 450 x 450 Drive: 4 kW Digital display Mitutojo Universal built-in rotary table 1050 x 627 mm Quill feed gear 0.02 - 2 mm/rev Dslrotqp Udjiq S Hout Spindle ISO 40, Speed range 32 - 1600 1/min, feeds 5-500 mm/min, rapid traverse 1.4 (0.7) m/min Cross table movement by hand 225 mm, Table top rotation 360 ° Table swivel/tilting +- 30 ° each Space requirement approx. 2 x 3 x 3 m, Weight approx. 3.3 to.

Condition: used, Year of construction: 1980, x-travel 700 mm y-travel 560 mm z-travel 450 mm total power requirement 3 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 3 x 3 x 2,5 m No. 0105 Universal copy milling machine Dslretqp U Tjiq S Heut DECKEL KF 3 S new in 1980 with rigid angled table Working area: 700 x 560 x 450 mm drive: 3 kW Roughing and finishing spindle drag table collets various tools and holders

Condition: used, Year of construction: 1972, x-travel 700 mm y-travel 450 mm z-travel 450 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2 x 3 x 3 m No. 1859 Universal tool milling machine MAHO MH 800 Working area: 700 x 450 x 450 Universal built-in rotary table 1050 x 627 mm, quill feed gear 0.02-0.2 mm/rev Djlrietqp Daeq S Heut Spindle ISO-40, Speed range 32-1600 1/min, feeds 5-500 mm/min, rapid traverse 1.4 (0.7) m/min. Cross table movement by hand 225 mm, Table top rotation 360° Table swivels/tiltable +- 30° each. Space requirement approx. 2 x 3 x 3 m, Weight approx. 3.3 tons.

Condition: used, Year of construction: 1988, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Contour 3 / Dialog 4 total power requirement 5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5 x 2,5 x 2,5 m No. 5268: Universal tool milling machine Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Duolriq Sotqp Rte Hot Working area: 300 x 300 x 400 mm

Condition: used, Year of construction: 1983, x-travel 300 mm y-travel 220 mm z-travel 400 mm Control Dialog 2 total power requirement 1,6 / 2 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5 x 2,5 x 2,2 m No. 5290 Universal tool milling machine DECKEL FP 2 NC / 2801 Working area: 300 x 220 x 400 Drive: 1.6/2 kW Control: Dialog 2 contouring control Duolriqotqpzto S Hot Fixed table with chip tray Spindle SK 40 Speed range up to 3150 min-1 Quill stroke 65 + 60 mm Space requirement c.3 x 3.5 m Transport dimensions approx. 2 loading meters Weight approx. 1300 kg

Condition: used, Year of construction: 1988, x-travel 300 mm Dujlriqstqp Iis S Hjt y-travel 300 mm z-travel 400 mm Control Contour - 3 / Dialog 4 total power requirement 5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5 x 2,5 x 2,5 m No. 5267: Universal tool milling machines Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm

Condition: used, Packing 260*160*160 mm Shipping weight 5 kg Scope of delivery as illustrated - Dolrju Nmzfjiq S Heut Set of magazine pockets / tool holder SK 40 Control: 7 basic holders + 10 storage pockets

Condition: repair required (used), Year of construction: 1980, x-travel 800 mm y-travel 300 mm Dolouynl Tsriq S Hjut z-travel 400 mm total power requirement 3 kW weight of the machine ca. 2,,2 t dimensions of the machine ca. 2,5*2*2 m

Year of construction: 1990, Condition: used, Scope of delivery as illustrated div. Baugruppen Shipping weight Auf Anfrage kg Packing Auf Anfrage mm DECKEL FP 3 CC / 2811 Assembly overview Item Manufacturer Designation Type Cover / FD - No. 1 Siemens Sinumerik 880 CNC control panel 6006 802142 Control cabinet 2 Siemens Sinumerik 880 CNC 6FC3491-0AA-Z 3 Bosch capacitor module KM 1100 - T 6005 04 512023 00 4 Bosch supply module VM 60 R - T 6005 04 512026 00 5 Bosch spindle module SPM 25 - T 6005 04 610120 00 6 Bosch servo module SM 10 / 20 - TC 6005 04 512034 00 7 Bosch servo module SM 10 / 20 - TC 6005 04 512034 00 8 Bosch servo module SM 10 / 20 - TC 6005 04 512034 00 9 Bosch servo module SM 25 / 50 - TC 6005 04 512035 00 Machine 10 Bosch servomotor SE - B4 100.030.01 6005 500150 11 Bosch Servomotor SE - B4 100.030.01 6005 500150 12 Bosch servomotor SE - B4 200.030.05 6005 500153 13 Bosch asynchronous motor Spdl. DM 112 4 S 6005 605101 14 Heidenhain scale X - axis LS 404 - ML 470 2002 008572 15 Heidenhain scale Y - axis LS 404 - ML 470 2002 008572 16 Heidenhain scale Z - axis LS 404 - ML 570 2002 008560 17 VOGEL centralised lubrication 122 044 302 6096 04 009240 00 18 Heilmeier Weinlein hydraulics 6096 009502 19 Spandau coolant tank approx. 150 litres Djlrsunut Ssiq S Hout 20 Cover rigid table 460 x 700 mm 2230 001100 21 Milling head cover with quill 3891 ? 22 Cover / Eucher Electronic handwheel 2280 04 000345 01 25 Lid basic machine - column with X/Z cross slide / Y-headstock Cabin / panelling 26 DECKEL Chip and splash guard cabin 2280 000405 with chip trolley 2280 000407 27 Slat cover X-axis 28 Z-axis disc cover 29 DECKEL Cover

Condition: used, Year of construction: 1987, x-travel 400 - 1600 mm y-travel 250 - 800 mm z-travel 350 - 800 mm Control CNC weight of the machine ca. 1,6 - 16 t dimensions of the machine ca. - m MAHO - Package from stock clearance - Special price for sale 4 x milling machine -MAHO MH 400 C - CNC 432 -MAHO MH 700 C - CNC 432 -MAHO MH 800 T - CNC 332 Dslriq Sounurus Hsut -MAHO MH 1600 S - CNC 432 EXW - Ex works Bensheim / Lorsch Free lorry

Condition: defective spare-parts repository (used), Year of construction: 1986, x-travel 410 mm Delrsunulbjiq S Hsut y-travel 310 mm z-travel 400 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 2*2*2 m Universal tool milling machine HERMLE UWF 700 Spindle holder SK 40 Speed range 40-2000 min Space requirement approx. 2 x 2 x 2 m Weight approx. 1100 kg For further data see attached PDF Rigid table 700 x 285 Horizontal milling machine vertical - milling head enclosed - partially rep. conditioned Documentation Working area: approx. 410 x 310 x 400 Drive: 2,2 Heidenhain digital display

Condition: used, x-travel - mm y-travel - mm z-travel - mm total power requirement - kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,5*1,5*2 m No. 2510 Universal milling machine Bridgeport ( type/design ) Working area: table 1300 x 305 Angle milling head with additional angle milling attachment and separate drive motor. Horizontal spindle MK-4, speed range 26-630 min-1, Angular milling head speed range 225 - 3385 min-1 Feed range x/y 8.4-224 mm/min, z 3.1-85 mm/min. Dujlriq Sjunug Es Hot Space requirement approx. 1.5 x 1.5 m, Weight approx. 1300 kg.