Condition: good (used), Year of construction: 1993, Tool holder SK40, speed range 20-4000 rpm, clamping area 1.100 x 600 mm Dujlq Nolcbggoiwkjt

Condition: used, Year of construction: 2003, Fanuc Tape Drill Mate vertical CNC drilling and tapping center. Dolq Niwstmrrcjkeut With Fanuc OM Mate Control Table surface 650mm x 380mm. Traverses X = 500 mm. Y = 380 mm. Z = 540 mm.

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, Travelling Column Boring-Milling Center / Brand: SORALUCE / Type: FX 14000 / Year of construction: 2009 Condition: Functional / ready for use. The machine can be inspected by appointment under power. TECHNICAL DATA: Travels: - X-axis (Longitudinal traverse): 14.000 mm - Y-axis (Cross traverse): 1.600 mm - Z-axis (Vertical traverse): 4.800 mm Milling head: - Pick-up station for 4 milling heads The pick-up station can be removed from the head change area so that the entire working area can be used. Dslqounzvao Niwksut - Reinforced direct output milling head * Longitudinal: 480 mm, diameter: 195 mm * 3.000 rpm, oil lubrication * Motor power: 46 kW - Indexable orthogonal head 1º-1º * Spindle taper: DIN-69871-AD (BIG PLUS) * Speed range: 4.000 rpm * Motor power: 46 kW Feedrates: - Feedrate: 10.000 mm/min - Rapid traverse (X/Y/Z): 25.000 mm/min - Total power: 133 kVA Dimensions and machine weight: - Installation area: 19.880 x 12.400 x 7.350 mm - Total weight: 62 tons EQUIPMENT: - CNC control: Heidenhain iTNC 530 - Electronic hand-wheel HR 420 - Tool changer, tool carrier: ATC, type M 120 positions , max. tool weight: 30 kg, horizontal - Operator platform, max. height: 3.600 mm - Two-station pendulum work, removable hardware and central software - HEIDENHAIN TT-140 type for tool measurement - Motorised rotary-translating table with motorised tilt-table +/- 5º DEMMELER type DRALT2500, dimensions 2.500 x 2.500 mm, travel 2.000 mm, max. permissable table load 60 tons - Rototranslating table DEMMELER, type DRLTS2500, dimensions 3.000 x 2.500 mm, travel 2.000 mm, max. permissable table load 60 tons - Coolant jets on rototranslating table sides for chip cleaning and auxiliary pushbutton panel for movement of the two rotary tables - One floor/base plate: 3.500 x 2.500 x 300 mm, max. load 15 tons/m2 - Internal coolant frequency inverter, 30 bar with paper filter tank - Full projection protection on the front and both sides of the table top - Documentation - CE-marking There is no guarantee for correctness and completeness of the technical detail and accessories. - Subject to prior sale -

Condition: used, Year of construction: 1995, - Heidenhain position display - Infinitely variable feed in all axes - rapid traverse in all axes - Hydraulic tightening system - Rigid angular table Duelsvhfqrsq Niwket - electric central lubrication - coolant system - workplace lighting - machine feet - year of construction 1995 Specifications Milling table: - Clamping surface: 650 x 350 mm - Clamping grooves: 5 - Slot width: 14 H7 - Groove spacing: 63 mm - Max. load: 250 kg Working range: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. Max. distances: - Top edge of table to horizontal spindle center: 140 - 540 mm - Max. table top edge to vertical head bottom edge: 430 mm Milling spindle: - Tool holder: SK40 - Vertical/horizontal speeds: 40 - 2550 rpm - Gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head can be swiveled on both sides: 90 ° Feed rates: - Feed lengthwise & crosswise: 0 - 1000 mm/min - Rapid traverse lengthwise & crosswise: 4000 mm/min - Vertical feed: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,910 h, Functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-travel: 762 mm Y-travel: 305 mm Z-travel: 406 mm Control: Haas MACHINE DETAILS AC counter: 17,594 Operating hours: 5,910 h Operating voltage: 366 / 425 V; 3 PE; 50/60 Hz Djlqsvtpuxo Niwkeut Full load current: 13 A

Condition: used, Year of construction: 2013, machine/vehicle number: 5279, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 22 rpm, Year of construction 2013 Control system: SIEMENS Sinumerik 840D pl HSK 100-A tool holder TRAVEL horizontal-longitudinal X = 8,000 mm Vertical headstock slide Y = 1,600 mm Headstock horizontal-transverse Z = 1,300 mm FUNCTIONAL PROBE: m&h HSK 100 SIEMENS B-MPI HAND-HELD CONTROL UNIT TRAVELING WORK PLATFORM 3-SIDED SPRAY AND CHIP PROTECTION WALL CHIP CONVEYOR Dolq Nieu Sppwswkout SPRAYING PLATE Sizes: Length: 10,000 mm Width: 2,500 mm WASHING GUN IN THE WORKROOM REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2000 l COLLISION MONITORING SYSTEM 2 CHANNEL pcs. 2 monitoring channels: - 1st collision monitoring orthogonal milling head (channel 1) - 2nd collision monitoring fork head (channel 2) PENDULUM MACHINING 3 WORK AREAS MILLING SURFACE INTERPOLATION (TRAORI, 3D tool radius compensation, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATION For fork head, arranged on clamping plate Storage positions 10 Maximum tool weight kg 12.5 Maximum tool length mm 200 Maximum tool diameter mm 63 Maximum tool diameter when free mm 250 Neighboring position Tool holder HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine 48 Maximum tool diameter with magazine filled to mm 125 Maximum tool diameter with mm 250 free adjacent positions Maximum tool length mm 500 - Maximum tool weight kg 25 Maximum tool load torque Nm 40 Tool holder HSK 100-A HEAD CHANGE MAGAZINE 1 pc.FORK HEAD WITH HIGH FREQUENCY SPINDLE AUTOMATIC FORK HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE - High-frequency milling spindle: - Integrated high-frequency spindle - Tool holder HSK - A 63 DIN 69893 - Main drive power 20 kW at 100 % ED or 25 kW at 40 % ED - Speed range up to 20,000 1/min - Motor spindle bearing with permanent grease lubrication - Sealing air seal - Torque: 40 Nm at 100% ED, 50 Nm at 40% ED - Automatic tool clamping - Power transmission according to speed-performance diagram GMN HCS 170 - Technical data according to data sheet E 745.1467.00 UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN - Liquid-cooled milling head - Cast construction made of GGG 60 - Milling head, automatically swivels 180 x 1 degree - The resulting positions can therefore not only be approached via the CNC control, but also programmed and processed - Repeat accuracy at the spindle nose ±0.002 mm, part accuracy thus ±3 sec - HSK 100-A tool holder - The milling spindle is equipped with a hydromechanical quick tool clamping system - Tool pull-in force: 45 kN - Internal coolant supply form A-D - External coolant supply via shower ring - Speed range 22- 4,000 1/min MAIN DRIVE by a frequency-controlled liquid-cooled AC motor with - 32 kW drive power at 100% duty cycle, 46 kW at 40% duty cycle. Direct power transmission WITHOUT gearbox, therefore no heating or wear of a gearbox. - 637 Nm torque at 100% ED, 875 Nm at 40% ED

Condition: excellent (used), MIKRON WF 3 DP universal milling machine TECHNICAL DATA Djlolnfggeq Niwkout Angular table clamping surface: 450 x 800 mm number of T-slots: 9 T-slot distance: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8,7 kW Milling spindle drive spindle speed: 21 steps speed range: 25 - 2500 /min step jump: 1,258 power of spindle motor: 3,3 / 4,0 kW tool holder: ISO 40 / M16 quill movement, vertical: 110 mm Feed drive Feed rates in all 3 axes: Infinitely variable Feed range: 1 - 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Torque at motor longitudinal + transversal: 4 Nm Vertical: 8 Nm Displacement travel Longitudinal movement of the clamping table (X axis): Automatic: 400 mm Transverse movement of the clamping table (Y axis): Automatic: 400 mm Vertical movement of the clamping table (Z axis): Automatic: 385 mm For the correctness, completeness and topicality of the data we do not take over guarantee

Year of construction: 2024, Condition: new, Functionality: fully functional, machine/vehicle number: 15124, The system is an AME gravity belt filter system from PS. The filter system is used for the continuous cleaning of cooling lubricants using the gravity principle. Dslq Nijvrwwfjwkeut

Year of construction: 1992, Condition: used, serial number 82586 Control Heidenhain 234 Duslq Nog U Nbxeiwkst x-travel 800 mm y-travel 500 mm z-travel 550 mm table size 900 x 600 mm max. 3.000 U/min tool adaptor SK40 weight of the machine ca. 2,2 t

Condition: good (used), Functionality: fully functional, machine/vehicle number: 71452, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, table width: 500 mm, table length: 900 mm, spindle motor power: 8,500 W, The subject of the sale is a Maho MH700P universal milling machine, serial number 71452, with Heidenhain control. The machine is in good technical condition - used since 2006 for minor work for the company's own needs. Duolq Niovwkrtewkjt Over the years, the milling machine has not shown any major problems in use - it is technically efficient and requires inspection and minor repairs at most. The machine is being sold due to the need to free up space due to the relocation of the company to a new location.

Condition: used, Year of construction: 2001, x-travel 630 mm y-travel 500 mm z-travel 500 mm Control CNC total power requirement 13 kW weight of the machine ca. 4,5 t dimensions of the machine ca. m Dslqot Ii Iwj Niwkeut

Condition: used, Year of construction: 2006, Functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, Basic machine with the travel paths: Machine column horizontal-longitudinal X = 2,000 mm Vertical headstock slide Y = 1,300 mm Headstock horizontal-transverse Z = 1,300 mm Machine stand In compact, torsion-resistant welded construction. Three hardened compact roller guides guarantee the transmission of high cutting performance with consistent quality. Protected against chips and cooling water with covers. Motor-driven CNC built-in rotary table - Clamping surface mm Ø 1,600 - 8 longitudinal grooves mm 22 H12 DIN 650 - 2 alignment grooves lengthwise and crosswise through center mm 22 H7 x 10 deep - T-slot distance mm 160 - Centering bush mm Ø 50 H7 x 20 deep - Speed max. 1/min 5 - Tilting moment clamped Nm 60,000 - Tangential torque clamped Nm 26,000 for circular milling Nm 5,000 - Table load (centric) max. kg 6,000 - Max. swing diameter of the workpiece 2300 mm 320 mm above the table top - Table top may show normal wear Duelq Njtrk Txeiwkjt Automatic tool changer - Chain magazine for tools 48 - Max. tool diameter with filled magazine mm 125 - with free neighboring slots mm 250 - Max. tool length mm 400 - Max. tool weight kg 25 - Max. tool load torque Nm 40 - Tool holder SK 50 DIN 69871 - Horizontal spindle position for tool change - Fixed position coding Headstock with automatic universal milling head (UFK) consisting of - Milling head holder, automatically swiveling 360 x 1 degree - Milling head, automatically swiveling 180 x 1 degree - Tool holder SK 50 DIN 69871 - Tool pull-in force: 20 kN - Main drive power provided by a frequency-controlled, liquid-cooled AC motor with 30 kW at 100% ED or 41 kW at 40% ED - at 36 to max. 4,000 rpm Digital individual feed drives for contour-accurate work via AC motors with constant torque, feed and rapid traverse range in all 3 axes infinitely variable from 2- 30,000 mm/min. Acceleration behavior of the individual axes 2 m/s² CNC control Heidenhain iTNC 530 Reinforced coolant device For coolant supply via nozzle ring, switchable to internal coolant supply for tools with steep taper DIN 69871 AD, incl. compact paper belt filter system for cleaning the coolant. Adjustable pressure-quantity control via bypass valve, two-stage switchable via CNC control. Pump capacity: 32 1/min at max. 20 bar Coolant tank, capacity 500 l Chip conveyor For travel path X = approx. mm 2000 Feed width approx. mm 350 Discharge height approx. mm 1,250 External electronic handwheel (HR 410) Switchable to 3 axes (with corresponding machine guidance up to 5 axes, not for uni-head axes) 1-channel collision monitoring system Monitors machine and conditional tool collision

Condition: good (used), Working travels 300 x 150 x 355 mm Table size 700 x 250 mm Spindle taper for collets ISO 30 Dslsu Eqixjq Niwkjut Spindle speeds 58-2'000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH

Condition: used, Technical details: x-travel: 2500 mm y-travel: 900 mm z-travel: 1000 mm total power requirement: 40 kW table surface area: 2900 x 800 mm feed speeds: 10 - 6000 mm/min rapid speed: 10 m/min spindle taper ISO: 50 spindle speeds:: 60 - 3000 Dolq Njvb Dmfjiwksut spindle drive: 22 kW total power requirement: 40 kW dimensions of the machine ca.: 6,5 x 5,9 x 3,5 m Machine was refurbished and retrofit in 2012 CNC HEIDENHAIN iTNC 530 2-axis milling head 2,5° indexing toolchanger for 30 tools 4. axis SEMPUCO tbale dia. 500 mm *

Condition: used, Year of construction: 1999, x-travel 3.400 mm y-travel 1.250 mm z-travel 2.000 mm Control TNC- 430 PA table-size 4.700 X 1.200 mm V- travel 500 tool taper ISO 50 milling head -swivable 0.001º/0.001º Grad main drive 37 kW Duslqju D I R Rs Niwkst Chip coveyor inkl handwheel HR-410 Tools changer 60 pos. milling head Automatic Head 45º internal coolant system feed weight of the machine ca. 35 t - Automatic Head 45º INCLUDED - Automatic Head 45º 0.001º/0.001º - Head 45º Max. Speed 3.000 rpm - 45º Head Taper ISO-50 - Twist Head Contiuous INCLUDED - Twist Head Max Speed 3.000 rpm - Twist Head Taper ISO-50 - Ram with Quill - Quill Diameter 150 mm. - Quill Taper ISO-50 - Pick up station AITEK for 45º and Twist Heads - Rotary Table ZEATZ Ø 1200 INCLUDED - RENISHAW MP 16+SP2/1

Condition: new, Functionality: fully functional, Professional CNC router COMAGRAV NOTUS PLUS 3000 ATC VACUUM MULTI with automatic tool change and multifunction for milling and cutting acrylic, dibond, aluminum, PVC, foam, vinyl and other common materials, please see the attached files below. COMAGRAV NOTUS PLUS is a flagship built on a welded thick-walled steel frame. The base of the machine is stress-relieved by annealing, which is why we provide a lifetime warranty on this frame. Sophisticated equipment such as AC servomotors, high-precision helical&pinion system, planetary backlash-free gearboxes and a long list of optional equipment make this machine an unrivaled solution for professionals. I believe that this professional CNC router is the best choice. COMAGRAV NOTUS PLUS machines work in many industries, from prototyping and model production, advertising production, to workshops with serial production. COMAGRAV NOTUS PLUS 3000 ATC VACUUM MULTI, offer no. 24220378, includes: Deljun Rtbjq Niwksut • working size area 2100x3150mm • 6 vacuum zones • high-pressure vacuum with a maximum transport capacity of 250m3/hour • professional milling spindle with ceramic bearings, maximum speed 24.000RPM • automatic tool change • cyclone dust collector • spray cooling system • industrial dust collecting machine • MULTI PACKAGE • camera recognition system • Pneumatic oscillating knife • Tangential module U1 The production time of COMAGRAV CNC machines is usually between 8 -12 weeks depending on the product, its complexity and the availability of special parts. Upon prior agreement, we will be happy to demonstrate COMAGRAV machines to you at our showroom in Poříčí nad Sázavou.

Condition: used, Year of construction: 2002, x-travel 350 mm y-travel 240 mm z-travel 340 mm Control Siemens Type 810 D total power requirement 15 kW weight of the machine ca. 1,6 t dimensions of the machine ca. m Dslqst Hxc Uj Niwkjut

Condition: good (used), Internal article no.: 24061 Universal milling machine Cover FP2 Dujlouf Thhoq Niwkjt Extensive accessories included Swivel table (clamping surface 700x240mm Tool holders (S20x2) Machine supports Spindle holder: SK40 (S20x2) Angled table: 700 x 330mm Speed: 40-2000 rpm Feed: 8-400 mm/min. Rapid traverse: 1200 mm/min. Travel: X 400 / Y 200 / Z 400mm Dimensions (LxWxH): 150 x 150 x 180cm Weight: approx. 1000Kg

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm y-travel: 400 mm Duolq Niovb Dctswkjt z-travel: 420 mm spindle turning speed range: 20 - 4000 U/min spindle motor: 6 kW spindle taper ISO: 40 Table dimensions: 900 x 460 mm feed range: 1 - 5000 mm/min total power requirement: 12 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 4,2 x 4,0 x 2,1 m Machine with CNC HEIDENHAIN TNC 415 automatic toolchanger 32 pockets measuring probe head coolant attachment fixed table hand operating panel *

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 330 mm z-travel 350 mm total power requirement 6,3 kW weight of the machine ca. 2 t Duslqst Hxbws Niwkst dimensions of the machine ca. 736 m

Condition: good (used), Year of construction: 2005, Internal article no.: 24012 Universal milling machine Macmon M100 NC YEAR OF MANUFACTURE: 2005 Control: Heidenhain TNC124 Dslorywa Rjq Niwkeut + coolant pump + machine vice Travel: X 310 / Y 170 / Z 330mm Speed: 40-2000 rpm Mounting: SK40 LxWxH: 1200 x 1600 x 1850mm Weight: approx. 1000Kg

Condition: used, Year of construction: 1993, Technical details: Duolsvb Dcysq Niwkjt x-travel: 850 mm y-travel: 630 mm z-travel: 500 mm spindle motor: 12 kW spindle turning speed range: 25 - 4200 U/min spindle cone ISO: 40 quill stroke: 90 mm feed range: 1 - 10000 mm/min table-size: 800 mm total power requirement: 15 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 4,3 x 4,4 x 2,3 m with CNC HEIDENHAIN TNC 407 - NC rotary table - splash housing - diverse toolholders *

Condition: used, Year of construction: 1988, x-travel 310 mm y-travel 340 mm Delq Nist Hxatowkjut z-travel 170 mm total power requirement 2,5 kW weight of the machine ca. 900 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1972, x-travel 300 mm y-travel 350 mm z-travel 150 mm total power requirement 2,5 kW Delet Hw Ipjq Niwkeut weight of the machine ca. 700 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1979, x-travel 1800 mm y-travel 1200 mm Delq Niwst Hw Ensksut z-travel 900 mm total power requirement 50 kW weight of the machine ca. 15 t dimensions of the machine ca. m