Condition: excellent (used), Dimensions and price depending on dimensions for one each stair trestle : 95 mm high. 10 euro 140 mm high 12 Euro 185 mm high 15 Euro 230 mm high 20 Euro 275 mm high 22 Euro Codpfxomn Ipue Afvsrh 320 mm high 25 Euro

Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm Crjdpfsvy Ihdox Afvsh max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm max. tool length HSK A100: 500 / 800 mm max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Accelaration X: max. 1,5 m/s² Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) - 2 positioning axes (B, C) - tools upon request

Condition: good (used), Bezel, steady rest, lynette Cedpfx Afsuqf Nvsvorh -Clamping tool: clamping bracket -Clamping width: 166 mm -Groove width: 32 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 185/85/H47 mm / 184/82/H46 mm -Weight: 4.1 kg / 3.9 kg

Condition: used, machine/vehicle number: 2201-5001, Used DECKEL tool milling machine model FP 3 with Heidenhain 3-axis digital readout Travel distances: X/Y/Z = 500/300/400 mm Spindle speeds: 25-2,500 rpm fixed angle table 800x400 mm Codpoxf Itgofx Afverh with vertical milling head, spindle SK40 with extensible quill with machine lamp and machine enclosure (currently not mounted, see last photo) The machine is located with us in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871/A, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN Package (motors, measuring systems, electronic handwheel) Spindle Performance: Maximum spindle motor power: 30 kW ICS: Internal coolant supply, 70 bar Additional Equipment: Tool changer with double gripper, 60 positions Dual worm conveyor (longitudinal) Hinged belt swarf conveyor (transversal) Preparation for 4th axis (rotary table) Full enclosure, closed at the top Crjdsq Ixc Tepfx Afvoh Accuracies: Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Only inquiries from Germany will be answered.

Condition: ready for operation (used), - USED - No 2 ANGLE PLATES FOR MILLNG MACHINES Cjdoxirxnspfx Afvorh OVERALL DIMENSIONS: 1000 x 1200 x 2500 mm

Condition: excellent (used), Stair Tensioner (28366) Codsln Ulaopfx Afvorh Clamping height 200 - 250 mm T grooves width 12 mm Clamping screw M 10 4 pieces available Weight 8,5 kg

Condition: used, Year of construction: 2004, x-travel 3.600 mm y-travel 920 mm z-travel 820 mm Control 840D pl ShopMill Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 Nm tool taper HSK-A63 swivellable B: +/- 100 ° table surface area 4.200 x 900 mm max. table load 4.200 kg T-slots 9x 18H7 x 100 number of toolpositions 130 ( 120 +10 ) pos. tool taper HSK-A63 max. tool diameter 50 mm max. tool weight 6,0 kg max. tool length 200 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min feed speeds max. 20.000 mm/min total power requirement 92 kVA weight of the machine ca. 17,0 t dimensions of the machine ca. 11,0 x 5,5 x 3,0 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 360 linear - 5 Axis ( NC-Swivel-Milling-Head & LEHMANN - EA 430.2A ) - moveable tailstock Credpfx Afeuntmqsvjh - separated WorkingTable - internal Coolant-System - 120-pos. Tool-Magazine incl. cleaning-unit - 10 additional pos. for oversized tools - Machine equipped with increased accuracy

Condition: ready for operation (used), Year of construction: 2019, operating hours: 22,541 h, General Data Machine weight 14500 kg Movement X-Axis Movement 7800 X-Axis Rapid Traverse 75 m/min Y-Axis Movement 1000 Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 400 Z-Axis Rapid Traverse 40 m/min Additional Equipment Full set of original pneumatic clamps (8 pcs) / Automatic tool changer / Minimum quantity lubrication system (MQL) / Integrated chip extraction points Crodpfx Afsxgkbievoh This 5-axis Emmegi SATELLITE XT 7800 was manufactured in 2019. A high-performance CNC machining center, ideal for aluminium profiles used in windows, façades, and more. Features include a 7,800 mm X-axis travel, spindle speed up to 24,000 rpm, and a tool magazine with 16 slots. Fully operational with excellent technical and visual condition. If you are looking to get high-quality milling capabilities consider the Emmegi SATELLITE XT 7800 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, machine/vehicle number: 186137200089, used TOS tool milling machine model FNG 40 CNC Year of manufacture: 1988 with Heidenhain path control TNC 155 with fixed angular table 800x400mm Travel paths: X/Y/Z = 500/400/400mm Speed range: 10-3150 rpm Spindle: SK40 Chip guard, attachable Documentation for the machine and control is available. The machine is located in 71334 Waiblingen-Beinstein and can be inspected by appointment. Credpfx Asxf Inkefvjh

Year of construction: 1994, condition: excellent (used), Cover milling machine FP 2A with control Dialog 12 + vice Codpofgmbdsfx Afvorh

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Signs of use on surface recognizable on pictures Dimensions: 38*68 cm Csdpfxouuh Sus Afverh Height: 25 cm

Condition: as good as new (ex-display), Shell end mills (24340) Crjdpfx Asdwbk Djfveh Diameter 86 mm and length 62mm Diameter 97 mm and length 63 mm Weight 4, 5 kg

Condition: used, Year of construction: 2009, x-travel 6.000 mm y-travel 900 mm z-travel 950 mm Control iTNC 530 C Heidenhain distance spindle nose and table vert.: 40 - 990 mm distance spindle nose and table hor.: 250 - 1.200 mm turning speed range - main spindle 30 - 12.000 min/-1 power capacity - main spindel (40%) 30 kW max. Torque (40%) 143 Nm swivellable +/- 100 ° indexing 0,001 ° spindle diameter in front bearing 65 mm tool taper HSK A 63 DIN 69893-1 table surface area 6.950 x 900 mm number of T-slots 6 T-slot - distance 160 mm T-slot - width 14 mm max. table load 1.200 kg number of toolpositions 48 pos. tool taper HSK A 63 DIN 69893-1 change-time tool to tool 6 sec change-time chip to chip 11 sec max. tool diameter 85 mm max. tool-dia with free toolbox 135 mm max. tool length 400 mm max. workpiece weight 8 kg rapid traverse ( X / Y / Z ) 40 / 40 / 30 m/min Feed x / y / z 1 ... 9.999 mm/min feed power 9 kN total power requirement 55 KVA weight of the machine ca. 26 t dimensions of the machine ca. 10,0 x 5,0 x 3,5 m Travelling column machining centre AXA VHC 3 6000 XTS - 1-axis NC swivel head, continuously adjustable positioning, hydraulic clamping - Direct linear measuring system - Oscillating operation with pendulum stroke - 800 L coolant tank Credpfx Afjwrzqhjvsh - Automatic sliding doors - 2x manual swiveling of the rotary table axis via external setpoint - 4th axis AXA RTA 2-300, faceplate diameter 300 mm, center height 200 mm - 3D measuring probe Renishaw OMP 60 - Tool breakage detection via laser beam (Blum Micro Compact) - Auto power off via key switch - Control cabinet heat exchanger with spindle cooling - Mechanical and electrical preparation for 2 pick-up magazines on the left and right outside - WITHOUT CLAMPING DEVICES, WITHOUT TOOLS

Year of construction: 2017, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD LONGITUDINAL TRAVEL: 3000 mm TRANSVERSAL TRAVEL: 1100 mm VERTICAL TRAVEL: 1500 mm Cedpfxjumpd Ao Afvorh RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 3100 x 1000 mm HEAD: CONTINUOUS ; ISO 50 ; 8000 rpm; 25/33 kW; 480/640 Nm TOOL MAGAZINE: CHAIN-TYPE ; 24 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 15 Bar WEIGHT: 30500 Kg OVERALL DIMENSIONS: 8000 x 7000 x 4265 mm ACCESSORIES: SWARF CONVEYOR ; ETHERNET PORT ; LINEAR SCALES ; PORTABLE HANDWHEEL ; THROUGH-SPINDLE AIR BLAST NOTE: LASER TOOL SETTER BLUM; TOUCH PROBE RENISHAW RMP-60; EXTERNAL SPINDLE SPRAY MIST LUBRIFICATION; GUARD FOR PENDULUM MACHINING

Condition: good (used), Year of construction: 2005, travel distance X-axis: 560 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2,400 m/min, feed rate Y-axis: 2,400 m/min, feed rate Z-axis: 2,400 m/min, table width: 450 mm, table length: 950 mm, Fixed table 950 x 450 mm Feeds all direction ISO-40 and 3kW 3 Axis Digital Read Out Systsem CE-Safety  Coolant system with semi closed lower base  X-Axis: 560mm Y-Axis: 320mm Z-Axis: 400mm Table Length: 950mm Table Width: 450mm Table load: 350 Spindle speeds: 2240Rpm Crsdpfxexdltbe Afvoh Feed rate X-Axis:2400mm/min. Feed rate Y-Axis:2400mm/min. Feed rate Z-Axis:2400mm/min. Stroke pinole: 0 - 95mm Length: 1800mm Width: 1600mm Height: 1900mm Weight: 1700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1983, condition: used, Universal tool milling machine Hermle Type UWF 700 year of manufacture 1983 table 700 x 285 mm travel X / Y Z 400 / 290 / 380 mm mounting SK 40 spindle speed 40 - 2000 rpm Crsdpfx Ajlqx Azsfvjh quill stroke 63 mm drive power 2,2 kw Digital display counterholder weight 1500 kg

Condition: used, functionality: unexamined, For sale are 3 milling heads with integrated quill by Scheller. €350 per milling head Crjdeuabmbepfx Afvoh The heads were previously installed on FE 1-10 Scheller milling machines. A reference photo is included in the images. (PLEASE NOTE: MACHINE IS NO LONGER AVAILABLE. THIS LISTING IS FOR THE HEADS ONLY) Delivery throughout Europe is possible on request and at additional cost. Prices are excluding VAT. Viewings available by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility? Or want to sell your own? For further information or contact options, please visit our website.

Condition: excellent (used), Vertical head (28571) Cjdpfxovcl Ade Afvsrh Type Huron type SK 40 Condition :as good as new Mounting surface diameter 255 mm Centering pin diameter 165 mm Bolt circle diameter 18 mm Fixing screws 210 mm Projection 300 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,400 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (max.): 24,000 rpm, distance between stands: 4,000 mm, Technical Data • Table clamping area: 6,000 × 3,000 mm • X-axis (longitudinal travel): 6,000 mm • Y-axis (cross travel): 3,200 mm • Z-axis (vertical travel): 1,400 mm • Distance between columns: 4,000 mm • Feed rate: 30,000 mm/min • Table load capacity: 4,000 kg/m² • Spindle speed max.: 24,000 rpm • Tool holder: HSK63A • Tool changer: 24 positions • C-axis: ±360° • A-axis: +95° / -110° Crsdpfx Aexlip Aofvsh

Condition: excellent (used), Universal milling machine Csdpfx Aswxu Nwefvorh SK 40 Table size 1300 x 300 mm X travel 750 mm Y travel 250 mm Z vertical travel 450 mm Spindle mount vertical SK 40 horizontal SK 40

Condition: excellent (used), Shell end millsHinge cuttersHinge cuttersMake MitsubishiType SPX4R05034BT50NMLength 340 mm Codpfx Afod Hfi Uevorh

Condition: excellent (used), Prism milling cutters Make Swiss franc & Orion 90 degrees 8 x 63 mm diameter 4 x ca. 100 mm diameter Codpfx Aodwmnpjfvorh

Condition: excellent (used), 16 end mills with indexable inserts Make Walter Weight 9.5 kg Crjdpfx Afjdx D Tvsveh

Condition: excellent (used), Milling Chuck Make Clarkson Type Autolock SK 50 1 x 6 mm 2 x 12 mm Crjdsdx D Umspfx Afveh