Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, Head Pick up Station TUPC CNC Indexing Micro Head A-Axis 360.000 x 0,001 Gr C-Axis 360.000 x 0,001 Gr SELS Spindle extionsion L=500 mm CTS Internal coolant system ATC Chain Tool changer 60 Positions Hydrostatic guideways Optional T Slotted floorplates 5600 x 1875 (2x) + 4000 x 1875 mm X-Axis: 16.000mm Y-Axis: 3.500mm Z-Axis: 1.500mm Power on spindle: 80kW Bedpfx Asxpfkkeaqjww Spindle speeds: 4000Rpm Spindle Taper: Sk59ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 24000mm Width: 6500mm Height: 6500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, CNC Travelling Column Drilling and Milling Machine ANAYAK Type HVM-3800-P Bed milling machine, design similar to a plate boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 Travel (X/Y/Z): 3200 mm / 1200 mm / 1500 mm Bwjdpfx Aaexcgtgjqow Table size: 3800 x 1200 mm T-slots: 8 pieces, 22 mm width, 130 mm pitch Table load capacity: max. 25 tons (fixed table - virtually unlimited load) Spindle taper: ISO 50 (DIN69871-A) (drawbar DIN 69872-B) Spindle speed: 60-4,000 rpm, infinitely variable Feed rate: up to 10,000 mm/min, infinitely variable Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Power supply: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head, fully automatic swivelling in two 45° planes - B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless measuring probe (probe and receiver not included) - Additional HF spindle 18,000 rpm - for mounting - Free-standing electrical cabinet - Chip conveyor positioned between the travelling column bed and machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic power unit - Operating manuals with circuit diagrams Machine footprint: L x W approx. 1,000 x 700 cm Machine height: approx. 410 cm Weight (complete): approx. 33 tons Good condition Available immediately, ex location Kassel, loaded free of charge

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine, direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control system stands out for its performance, speed, precision, and long service life. • Column design made of cast iron for high rigidity • Carousel-type tool changer with eight tool stations • All linear guides with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed-loop system) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop slam switch greatly facilitates program setup • Coolant system with 70-liter coolant tank • Tool change carried out automatically or at the push of a button (electropneumatic tool clamping system) • Heavy-duty, precision-milled table – generously sized and finely surface-machined • Large access doors to minimize cleaning and maintenance times • LED machine lamp for full illumination of the work area • Additional SIEMENS package: material defect warranty and free on-site service (OSS) SINUMERIK 808D • Software package identical to control version, ensuring process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoders – no reference run required • Higher accuracy Control • 8.4” LCD color display with 800 x 600 resolution Additional SIEMENS OSS package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Horizontal milling table Length 690 mm Width 225 mm Vertical spindle to table distance min. 90 mm Bedpfow Ea Swex Aaqjww Vertical spindle to table distance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot pitch 63 mm Maximum load 150 kg Accuracy Repeatability ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle to column distance min. 280 mm Spindle to column distance max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor power S1 continuous operation 3.7 kW Drive motor power S6-30% duty cycle 5.5 kW Drive motor torque S1 continuous operation 24 Nm Drive motor torque S6-30% duty cycle 36 Nm Feed speed X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed motor torque X-axis S1 continuous operation 3.5 Nm Y-axis S1 continuous operation 6 Nm Z-axis S1 continuous operation 6 Nm Tool changer Type: carousel Number of tool stations: 8 Max. tool diameter: 100 mm Max. tool length: 200 mm Max. tool weight: 6 kg Tool-to-tool change time: 7 s

Condition: good (used), Year of construction: 2007, Brand : SORALUCE Model : TA 20 Type: BANCADA FIJA Bwedpfx Aot Iwtuoaqjw Cnc : HEIDENHAIN iTNC 530 Year : 2007 Table size : 2000 x 800 mm Number of T slots : 4 Slots dimensions: 22 mm X axis Travel : 2000 mm Y axis travel : 800 mm Z axis travel : 800 mm Rapid traverse: 20.000 mm/min Spindle type: Universal ISO 50 Turning ranges : 20-3000 rpm Spindle power : 22 kw Hydraulic clamping tools :Included CE fairing :Included Work piece weight on table : 4.000 kg Machine weight: 10.000 kg Electronic wheel : Heidenhain HR-410 Machine dimensions : 6.500 x 3.300 x 2.740 mm Machine equipped with: Magnetic table 1.500 x 600 mm 2 Chip conveyor

Condition: good (used), Year of construction: 1987, functionality: limited functionality, Universal tool milling machine Deckel Maho FP 4 A Manufacturer: Deckel Maho DMG Type: FP4A Control unit: Heidenhain TNC 355 Incl. handwheel Travel paths x-path 485mm y-path 385mm z-path 380mm Table surface approx. 800 x 460mm Speed range - milling 63 - 3,150 rpm Drive power - milling spindle 4.4 kW Tool holder SK 40 Machine weight approx. 1.8 t Space requirement approx. 2.0 x 3.0 x 2.0 m Accessories Bwsdsvmq U Tspfx Aaqsw Chip tray Coolant system Rubber mats The price is net. Legal. VAT 19% is added. We are happy to answer any further questions you may have. Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please ask. We look forward to hearing from you.

Condition: excellent (used), x-travel 450 mm y-travel 175 mm z-travel 400 mm Bwjdpfxsvwgn De Aaqjw spindle turning speed range 60 - 2800 U/min weight of the machine ca. 1 t dimensions of the machine ca. 1,1 x 1 x 1,5 m Die Fräsmaschine ist in einem sehr gutem gepflegtem Zustand

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, feed length X-axis: 500 mm, feed length Z-axis: 490 mm, travel distance Y-axis: 260 mm, spindle speed (max.): 9,000 rpm, spindle speed (min.): 100 rpm, table length: 880 mm, table width: 320 mm, type of input current: three-phase, total height: 2,250 mm, total length: 2,200 mm, total width: 2,100 mm, overall weight: 2,450 kg, input voltage: 400 V, workpiece weight (max.): 300 kg, Equipment: documentation/manual, CNC Milling machine FEHLMANN Picomax 54 TECHNICAL CHARACTERISTICS: Year of manufacturing: 1999 CNC control: HEIDENHAIN TNC 310 Number of axes: 3 Stroke X axis: 500 [mm] Stroke Y axis: 260 [mm] Stroke Z axis: 490 [mm] Quill stroke: 160 [mm] Max. distance spindle nose / table: 610 [mm] Table length: 880 [mm] Table width: 320 [mm] Max. load on table: 300 [Kg] Spindle type: SF32 Min. spindle speed: 100 [rpm] Max. spindle speed: 9000 [rpm] Lubrication tank capacity: 100 [l] Centralized lubrication: Automatic - WILLY VOGEL Supply voltage: 400 [V] Dimensions: 2200 x 2100 x 2250 [mm] Weight: 2450 [Kg] INCLUDED EQUIPMENT: x7 SF32 Weldon-type attachments x8 SF32 end mill attachments x2 SF32 to Morse Taper 2 reducing sleeves x1 SF32 to Morse Taper 3 reducing sleeve x6 SF32 ER32 collet chuck attachments x5 SF32 ER25 collet chuck attachments x1 boring head Bodpfx Asxp H T Teaqsww x7 drill chucks Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to brands such as Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron, Biglia; also see lathe, mill-turn machine, milling machine.

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 21000 kg Main Drive Spindle speed range 18000 Number of axis 5 Bjdpoxqh Uuefx Aaqeww Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Workpiece Workpiece weight 2000 kg Tools Type of tool holder HSK-A63 This 5-axis DMG MORI DMC 100U was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U machine we have for sale. Contact us for more information. Application Types Milling

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 80 CNC milling machine direct from the manufacturer. - Machine in cast iron column design for high rigidity - Carousel tool changer with 12 tool positions - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drive in all axes (closed control loop) - Maximum spindle speed of 10,000 min-1 - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs SINUMERIK 808 ADVANCED CNC technology from the technology leader SINUMERIK 808D on PC - Control-identical software package that further simplifies the handling of the machine tool Compact and robust Bodpfx Ajw Ea Rtoaqsww - Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments Communicative - Front panel USB (IP65) - Serial interface RS232C - RJ45 Ethernet on the rear - Technology-specific keyboard layout - Hard keys with protective membrane Dimensions and weights Length approx. 1995 mm Width/depth approx. 1930 mm Height approx. 1640 mm Weight approx. 2300 kg Rapid traverse speed X-axis 20 m/min Y-axis 20 m/min Z-axis 20 m/min Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 12 kVA Horizontal milling table Length 800 mm Width 260 mm Distance vertical spindle - milling table min. 100 mm Distance vertical spindle - milling table max. 550 mm T-slots size 16 mm Number of T-slots 5 T-slot spacing 50 mm Load capacity max. 200 kg Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 450 W Tank capacity 80 l Pneumatic connection Operating pressure 7 bar Travel distance X-axis automatic 450 mm Y-axis automatic 260 mm Z-axis automatic 450 mm Distance spindle - column max. 370 mm Vertical spindle Spindle holder BT 40 Speed range 50 - 10000 min¯¹ Power drive motor continuous operation S1 3.7 kW Power drive motor S6-30 % operation 5.5 kW Torque drive motor continuous operation S1 24 Nm Torque drive motor 30% operation S6 36 Nm Feed motor Torque X-axis continuous operation S1 6 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 11 Nm Tool changer Carousel type Number of tool positions 12 tools Tool diameter max. 95 mm Tool length max. 300 mm Tool weight max. 8 kg Time tool change chip to chip (C to C) 7 s

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Heidenhain iTNC530, ISO SK50 spindle taper, 5,000rpm Spindle Speed, 60 station toolchanger, Bwsdpsvz A Riofx Aaqsw coolant, Interlocked guards.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 42,280 h, functionality: fully functional, machine/vehicle number: SH1239, feed length X-axis: 700 mm, feed length Y-axis: 400 mm, year of last overhaul: 2025, Equipment: documentation/manual, Large working area: 700 x 400 mm Torsion-resistant welded steel frame Highly dynamic linear motor axes Quick product changeover possible Flexible PCB holding systems Bwsdpfx Aasxt Rkkjqjw Separation process with rotary cutting tool Cuts any type of PCB material

Year of construction: 1994, condition: good (used), Macmon M400 CNC with Heidenhain TNC 355 control Manufacturer: Macmon Type: M400 CNC Control: Heidenhain TNC 355 Year of construction: 1994 Weight: 2700 kg Connected load: 12 kW Travel X: 630 mm Travel Y: 450 mm Travel Z: 380 mm clamping surface table: 800x500 mm spindle revolutions: 20-2780 rpm Steps: 2x continuous Spindle power: 5,5 kW tool holder: SK40/ISO40 Axle drive: 0-2000 mm/min Axis drive rapid traverse: 5000 mm/min quill stroke W: 100 mm Swivelling of the head: 2x90 Resolution measuring system: 0.001 mm Bwedpfx Ajfmu E Ajaqjw positioning: +/- 0,02 mm Special features: protective housing to open, chip tray, quill stroke

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. All linear guides with stainless steel covers Automatic central lubrication Servo drive from SIEMENS in all axes (open control loop) Max. Spindle speed 4000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Tools can be changed at the touch of a button Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance Dimensions and weights Length approx. 1410 mm Width/depth approx. 1372 mm Height approx. 2007 mm Weight approx. 1000 kg Drilling/milling capacity Cutter head size max. 50 mm End mill size max. 25 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 5 kVA Horizontal milling table Length 620 mm Width 180 mm Distance vertical spindle - milling table min. 50 mm Distance vertical spindle - milling table max. 295 mm T-slots size 12 mm Number of T-slots 3 T-slot spacing 50 mm Load max. 30 kg Accuracy Repeat accuracy ± 0.02 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 95 W Tank capacity 30 l Travel distance X-axis automatic 355 mm Y-axis automatic 190 mm Z-axis automatic 245 mm Bwjdpow Ea R Hjfx Aaqew Vertical spindle Spindle holder BT 30 Speed range 4000 min¯¹ Explanation Speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation Power drive motor continuous operation S1 1.5 kW Power drive motor S6-30 % operation 2.2 kW Torque drive motor continuous operation S1 9.5 Nm Torque drive motor 30% operation S6 14 Nm Feed rate Speed X-axis 10000 mm/min Y-axis 10000 mm/min Z-axis 10000 mm/min Feed motor torque X-axis continuous operation S1 1.9 Nm Y-axis continuous operation S1 3.5 Nm Z-axis continuous operation S1 3.5 Nm

Year of construction: 1978, condition: used, Dear Sir or Madam ! Below we offer without engagement: Make : Nigata Designation : U. - milling machine Type : 2 UMB Year of manufacture : 1978 Technical data : Travel X x Y x Z 780 x 280 x 380 mm Table size 1370 x 300 mm Speed 40 - 1750 rpm Mounting ISO 50 Digital display Elesta Visulesta IIE (further technical data on request) Please let us know if you are still interested in purchasing such a machine. If you are looking for other objects, or if you intend to sell them yourself, we also ask for your non-binding information. If you are interested, we would like to hear from you. Bodpobagfbjfx Aaqsww With kind regards, signed. Andree

Year of construction: 1980, condition: used, Manufacturer MAHO Type MAHO 900 Year of manufacture 1980 Operating hours 45000 Accessories: Various tool holders SK50 Space requirement machine (LxWxH) 4800 x 3600 x 2400 Loading dimensions machine (LxWxH) approx. 4m x 2,1m x 2,5m Bwodsb D Iv Topfx Aaqew Weight machine 5600 kg

Year of construction: 1973, condition: used, Travel 800 x 500 x 450 mm Bwsdpfjb S Ivuox Aaqsw Table load approx. 600 kg Weight approx. 4 t.

Year of construction: 1989, condition: good (used), Machine: Control Heidenhain TNC 355 Built in 1989 Bwsdped I Uwmjfx Aaqsw Travel: X 600 mm method path Y 450 mm process path Z 400 mm method Spindle speed 20 – 4000 min-1 Angular size 850 x 440 mm Swivel cull 650 x 395 mm Electronic hand wheel The machine is still under power and is in good condition.

Condition: good (used), gebr. dividing head with a 3 jaw Röhm chuck dia 140 mm Bwedpfx Aaoipic Ieqew

Condition: good (used), Indexable inserts milling cutter, Sandvik Coromill 200 Bjdpeip Dyiefx Aaqoww Diameter 200 mm with packing

Condition: good (used), Year of construction: 1983, Maho 700 C, year of manufacture 1983 Travel paths X/Y/Z: 700 mm/500 mm/450 mm Table dimensions X/Y: 900 mm/500 mm Spindle mount: ISO 40 Spindle speed: 3150 rpm Bodpfx Aowya U Ujaqsww Spindle stroke: 100 mm Weight: approx. 3500 kg Controller: Philips CNC 432

Condition: good (used), Year of construction: 1984, Milling machine - horizontal drilling machine Brand: Bohle Type: BWS 120 Year of manufacture: 1984 Voltage: 380 V Power: 22 kW Bwodpfx Asvvldnoaqsw Longitudinal displacement in X: 1800 mm Transverse movement in Y: 600 mm Vertical movement in Z: 600 mm Overall dimensions: 3.80 mx 5.4 mx 3.2 m Weight: 9500 kg

Condition: good (used), Year of construction: 1990, CNC milling machine, lid, FP4-AT, 3 axes X 560/Y500/Z450 speed range 40-4000 min-1 control Contur-3, SK-40 record, weight 3.4 tons. Bwedpfx Asdygdhsaqsw

Condition: good (used), branded engraving milling machine, cover GK12 with accessories Bwedou T Nffspfx Aaqow

Condition: good (used), Year of construction: 1985, Technical Data – Bridgeport Series I Table Size / Work Area 9″ × 49″ (approx. 299 mm × 1245 mm) T-Slots 3 slots, spacing 2.5″ (approx. 64 mm), slot width 0.625″ (approx. 16 mm) Travel Paths X (Longitudinal) without power feed: 36″ (approx. 914 mm) with power feed: 33″ (approx. 838 mm) Traverse Y (Cross Travel) 12″ (approx. 306 mm) Quill Stroke (Quill Travel) 5″ (approx. 127 mm) Knee Travel (Z-Axis/Table Elevation) 16″ (approx. 406 mm) Ram Travel (Headstock Fore/Aft on Ram) 12″ (approx. 306 mm) Min./Max. Distance Spindle Axis to Table Top (Spindle to Table Surface) min: 2.5″ (approx. 64 mm) max: 18.25″ (approx. 463 mm) Min./Max. Distance Spindle to Column Front (Min./Max. Throat) min: 6.75″ (approx. 171 mm) max: 18.75″ (approx. 476 mm) Spindle / Quill Spindle diameter: 1.875″ (approx. 48 mm) Bwsdexl R N Dspfx Aaqow Quill diameter: 3.375″ (approx. 86 mm) Spindle taper (standard): R-8 Spindle Motor / Power 30 min. rating: 3 HP (approx. 2.2 kW) Continuous duty: 2 HP (approx. 1.5 kW) Spindle Speed Range (variable, two speed ranges) Low: 60 – 500 rpm High: 500 – 4200 rpm Drilling Capacity (Power Quill Feed, mild steel) approx. 3/8″ (approx. 9.5 mm) Milling Capacity (mild steel, cutting) approx. 2 CI/min (Cutting Inches per Minute) Drilling Radius (mild steel) up to Ø 6″ (approx. 152 mm) Traverse Speeds (X/Y) manual / automatic up to 100 ipm (approx. 2540 mm/min) in CNC models Machine Footprint & Height Floor space: 84″ × 120″ (approx. 2140 mm × 3048 mm) Overall height: 87″ (approx. 2210 mm) Net Weight / Shipping Weight Net weight: approx. 1930 lbs (approx. 875 kg) Maximum Workpiece Weight (on table) approx. 750 lbs (approx. 340 kg)

Condition: used, Year of construction: 1984, Technical data: Longitudinal travel (x-axis) 15,900 mm Horizontal feed path (z-axis) 790 mm Vertical feed path (y-axis) 500 mm Swivel range of the milling spindle 45°F +/- Milling spindle drive power of the DC motor 50 kW Milling spindle diameter in the front bearing 160 mm Inside tool holder ISO No. 50 DIN 2079 Outside tool holder ISO No. 60 Tool feed - manual via threaded rod M24 Spindle speeds continuously adjustable in 2 ranges from 50-500 rpm. Speed range in the 1st stage 50-250 rpm. Speed range in the 2nd stage 100-500 rpm. Step step 1:2 Range of constant power 160 rpm. Max. torque on the milling spindle 2,000 Nm Milling feed in the x-direction continuously adjustable from 40-4,000 mm/min. Rapid traverse 8,000 mm/min. Bodpfx Aaovvll Sjqsww Adjustment speed in the y and z-direction continuously adjustable from 20-500 mm/min. Rapid traverse for the y and z-axis 1,000 mm/min. Max. swivel speed for the milling spindle 2°/sec. Display resolution of the 3 axes (positioning accuracy) 0.1 mm Operating voltage 380 volts 50 Hz Control voltage 220 volts Distance from the clamping table to the retracted, horizontally positioned milling spindle nose 500 mm Distance from the cheek support (floor) to the middle of the milling spindle in the vertical middle position 1,300 mm Distance from the clamping table to the middle of the support guide 2,300 mm Length of the cheek and support guide 16,800 mm Weight approx. 23,000 kg Defects: some leaks on the clamping cylinders