Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, Joos vacuum table with silicone membrane Universally applicable press, veneer press for veneering, laminating, form bonding, contour veneering, edge banding, etc. With this press, you can, with certain limitations, forgo a hydraulic veneer press. New heat-resistant silicone membrane, extremely stretchable and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or mineral-based materials. Internal frame dimensions approx. 2900 x 1410 mm, usable area approx. 2800 x 1300 mm Working height approx. 900 mm Becker VT4.40 vacuum pump, 400V, 1.5 kW with 40 m³/h output and two 200-liter vacuum tanks, ensuring comfortable operation and fast evacuation. Electronic vacuum pressure switch, so the pump switches off when the set vacuum is reached and does not run continuously. Mobile on four swivel castors, lockable Frame easily folds open, secured with two latches Double frame for quick membrane replacement. A new silicone membrane is currently installed. Quick vacuum distribution via grooved base plate CE marking Rjdpfxey Hl Hps Akxot Original paintwork, some spots touched up The silicone membrane and base plate have been renewed, machine is immediately operational Dimensions approx. 3100 x 1550 x 1020 mm (LxWxH). Weight approx. 550 kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this supplier."

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: Redsy Ih Ryjpfx Akxjt Flexible, pneumatic press with very short setup times The press consists of a sturdy press frame, a smoothly movable press carriage, and horizontal and vertical press jaws. All controls are conveniently accessible. The MPH 100 achieves a clamping effect of the press carriage when pressing – similar to a screw clamp. - Equipped with 3 vertical press jaws - Equipped with 2 horizontal press jaws - Cabinet length: 380 - 2500 mm - Cabinet depth: max. 600 mm - Cabinet height: 350 - 1200 mm - Pressing force: 3.6 kN / press jaw - Working height: 600 mm - Weight: 1.1 t - Operating pressure: 6 bar Availability: short-term Storage location: 63934 Röllbach

Condition: excellent (used), Catalogue number 7985 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 50mm - Silo diameter: 1000mm - Output: up to 10 briquettes/min, up to approx. 90 kg/h - Automatic machine operation - Motor: 5.5kW - Dimensions (L/W/H): 1720x1100x1500mm - Weight: approx. 650kg ADVANTAGES – Italian made – Used briquetting press Rjdpfx Aksy Id Smexjt – Not repainted – Very good condition Net price: 32,900 PLN Net price: 7,830 EUR (at an exchange rate of 4.2 EUR) (Prices may change with significant fluctuations in exchange rates)

Condition: excellent (used), Catalogue number: 7984 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70 mm - hopper diameter: 1000 mm - output: up to 10 briquettes/min, approx. 90 kg/h - automatic machine operation - motor: 5.5 kW - dimensions (L/W/H): 1800x1200x1500 mm - weight: approx. 650 kg Rsdpfsy Id Rvjx Akxot ADVANTAGES – Italian manufacture – used briquetting press – not repainted – very good condition Net price: 33,900 PLN Net price: 8,070 EUR (at an exchange rate of 4.2 PLN/EUR) (Prices may vary with significant currency fluctuations)

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Bürkle veneer press S 80, year of manufacture approx. 1982, overall dimensions: 3080 x 1550 x 1800 mm, weight 4500 kg, 80 t pressing force, 6 cylinders, pressing area 2500 x 1300 mm, heating plates have been tested, hydraulic drive, robust construction, good condition, fully functional. Price ex works. Shipping available at extra cost! Rsdpfx Aoyvhkvekxet

Condition: good (used), Year of construction: 1968, functionality: fully functional, Press dimensions: 2550 × 1350 mm Pressing force: 80 t Opening: approx. 400 mm Heating: electric, approx. 10–24 kW Connection: 380 V Weight: approx. 4 t Design: electrohydraulic, 4 cylinders Robust construction Ideal for veneer work and panel gluing Gold anodized plates Ex works The machine is in good and well-maintained condition for its age. Solid industrial quality – durable and reliable. Rjdpfxjyu Sife Akxot Shipping available at extra cost!

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, Veneer Press JU 60 Press size: 2200 x 1200 mm Heating plate damaged (see photos), heating plate is functional Year of manufacture: 1965, heating 12 kW Loading costs extra (forklift rental approx. €500) Rodpfxsmhguao Akxst Transport available at additional cost!

Condition: good (used), Code: 0374 Brand: ITALPRESSE Model: V/4 Mechanical cold press for wood, panels, doors, furniture, composite materials, technical materials, plastics, aluminium and various other materials Rjdoy If Rwjpfx Akxjt Working dimensions 2200 x 1000 mm Platen dimensions: n° 2 platens 1100 x 1000 mm NEW aluminium sheets Option to work on a single table or on separate tables Opening 650 mm N° 4 pressure screws N°2 motors 0,75 Hp each Overall dimensions mm 2550 x 1000 x 1650 h Weight kg 870

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, tiltable vacuum press with a pressing area of 3,500 mm x 1,420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press will be powder-coated in RAL 7012 and RAL 7035 finishes. Special colors are possible upon request but must be discussed beforehand and may incur additional costs. Welded table construction for professional use, mounted on a tiltable transport cart, equipped with 4 swivel castors, surface load capacity of 150 kg. When not in use, the machine can be tilted to save space and locked in place, reducing its depth to 800 mm. The tabletop consists of a 22 mm thick laminate MDF board, covered in the pressing area by a slotted vacuum distribution plate made of MDF. Membrane frame opening is supported by 2 gas pressure springs mounted on the sides of the machine. Equipped with a natural rubber membrane, 2 mm thick, with 780% elasticity and temperature resistance up to 70°C, fastened using a clamping system for efficient membrane changes. The continuous sealing of the pressing chamber is achieved via a sealing profile in the membrane frame. Oil-lubricated rotary vane vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks, providing a total capacity of 200 liters. The evacuation and venting of the pressing chamber is carried out via a 3-way ball valve at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. Additionally, you may opt for initial setup and a brief instruction session by one of our staff members. Should you wish to take advantage of this service, we will be happy to provide an additional quote. Summary of key features: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elasticity: 780%, very high recovery properties, suitable for temperatures up to 70°C - MDF vacuum distribution plate - Digital vacuum control VAK-CONTROL 1 with auto shut-off - Vacuum pump: 40 m³/h oil-lubricated Rsdpoywpt Iofx Akxet - Maximum negative pressure: -0.99 bar - Maximum pressing pressure up to 9.9 t/m² - Power supply: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with locking mechanism - Additional 13 mm vacuum connection - Pressing area: 3,500 x 1,420 mm - Table height to vacuum distribution plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1,030 mm - Installation dimensions (ready for operation): 3,790 x 1,700 x 2,150 mm (LxWxH) - Installation dimensions (tilted): 3,790 x 800 x 1,750 mm (LxWxH) Customs tariff number: 84659400 Net weight: 570 kg Gross weight: 660 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump delivery rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Rjdpfx Akji Hplksxot Machine width: 1650 mm Machine height: 1100 mm Weight: 850 kg

Condition: as good as new (ex-display), Year of construction: 2026, Pressing area: 3000mm x 1300mm Opening: 450mm Heating: electric / thermal oil Maximum temperature: 120°C Plate surface: stainless steel Press opening: automatic - timer / manual Emergency stop: yes, with pull cord Pressing force: 120t Number of cylinders: 6 Rsdpfx Aehpl U Ijkxot Current consumption: 36A Power consumption: 21 kW Machine length: 3600 mm Machine width: 1800 mm Weight: 4500kg

Condition: used, Year of construction: 1987, Pressing area: 2550 mm x 1250 mm Opening: 400 mm Heating: electric Plate surface: aluminium – anodized Rjdpfeyt E Rmox Akxst Emergency stop: yes, foot bar Pressing force: 80 t Number of cylinders: 4 Power consumption: 32.6 A Machine length: 3000 mm Machine width: 1500 mm Weight: 4000 kg

Condition: used, Year of construction: 1989, Pressing area: 2500 mm x 1100 mm Opening: 400 mm Heating: electric Plate surface: Aluminium, gold anodized Redpfx Akoyl Tinexet Emergency stop: yes Pressing force: 65 t Number of cylinders: 4 Current consumption: 22 A Machine length: 3000 mm Machine width: 1300 mm Weight: 3000 kg

Condition: used, Year of construction: 1976, Pressing area: 2500mm x 1250mm Opening: 360mm Top platen heating: electric Rsdpfsx Edl Eex Akxst Bottom platen heating: defective Platen surface: aluminum, anodized Pressing force: 90t Number of cylinders: 4 Power consumption: approx. 33A Machine length: 3000mm Machine width: 1500mm Weight: 4000kg

Condition: new, Year of construction: 2025, Table size: 3500 mm x 1500 mm Pump operating capacity: -0.85 bar Reservoir tank: 100 l Vacuum pump: Becker Vacuum pump capacity: 40 m³/h Noise level: less than 70 dB Machine length: 3600 mm Machine width: 1650 mm Machine width (folded): 850 mm Rsdpfx Akomftlyoxjt Weight: 480 kg

Condition: new, Year of construction: 2025, Table size: 3000mm x 1500mm Pump operating vacuum: -0.85 bar Vacuum pump capacity: 40 m³/h Vacuum pump manufacturer: Becker Rjdpfx Ajipv Nrekxet Sound level: less than 70 dB Reservoir tank: 100 l Machine length: 3100 mm Machine width: 1650 mm Machine width (folded): 850 mm Weight: 425 kg

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Rjdpsvvkmbefx Akxet

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Rsdpfxevvkl Do Akxot Storage location: Nattheim

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rsdpoy Egz Sofx Akxst Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately -

Condition: used, working width 350 mm working length 5.100 mm hollow 210 mm Solid hydraulic beam press Bürkle type HS 1/90 35/510 for gluing timber, beams or other pressing tasks. Heating plates without function. Rodpfx Akey Eryyexet Including replacement cylinders as good as new.

Condition: used, working width 750 mm Rodpjy Erymefx Akxjt working length 3.000 mm length ~ 3.850 mm width ~1.000 mm height ~ 2.000 mm Hydraulic veneer press Ott type 300 K75 for gluing veneers, timbers, beams or other pressing tasks. Heating plates without function.

Condition: used, work piece width max ~ 100 mm workpiece height max ~ 100 mm cycle time 4 sec Mitre jointing machine Himmel type HF120 for precise and firm gluing of mitre joints in wooden frames, glazing bars and battens with white glue. The machine enables a fast setting time thanks to high-frequency technology, pneumatic pressing mechanisms and exact alignment of the workpieces. Ideal for furniture and picture frame construction. The glue must be applied manually as the machine does not have a glue container. Operation: Foot switch Possible angles: 90°, 120°, 135° Redpfx Asv Hp Hbjkxot Machine without function

Condition: used, Press pressure max 104 t working length 3.090 mm Working width 4 x 240 mm Solid hydraulic molding or beam press Wemhöner type VS 4 S for veneering moldings, gluing wood or other pressing tasks. The press has four independently controllable pressing surfaces. Rodpoy Emwaofx Akxot Including dismantling and loading. Fixed loading date: 15.06.2026. Glue spreader also available.

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Redpfepbvqvox Akxjt Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: P0220118, functionality: fully functional, pressing force: 9 t, number of cylinders: 6, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 200 mm, Equipment: CE marking, TECHNICAL DETAILS Max. workpiece length: 2,500 mm Max. workpiece width: 1,300 mm Max. workpiece height: 200 mm Number of cylinders: 6 Total working pressure: 90,000 N Working pressure: 294,200 N/m² MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 3,000 x 2,070 x 1,670 mm Rodpfxsy Akuko Akxet Unladen weight: 4,000 kg EQUIPMENT CE marking