Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Pneumatic press for edge-gluing wood panels. Isdeyivr Hepfx Abgotf TECHFA type PTD 6000 Max. dimensions of glued elements: - length: 6300 mm - width: 160 mm - height: 850 mm Press is divided into 4 sections.

Condition: excellent (used), functionality: fully functional, planing width: 630 mm, rotational speed (max.): 5,500 rpm, overall weight: 1,100 kg, working width: 630 mm, height adjustment type: mechanical, planing height: 200 mm, Thickness planer Dornburg, model DD 63. Robust thickness planer (cast iron), table length approx. 1050 mm. Planing width approx. 630 mm, maximum clearance height 200 mm. Cutterhead equipped with 4 strip knives. Motor 5.5 kW, speed 5500 rpm. Feed rate 18 m/min. Dimensions approx. 1100 x 1300 x 1600 mm (LxWxH). Weight approx. 1100 kg. Itsdpfowtqzrox Abgjf

Condition: used, Year of construction: 1975, functionality: fully functional, power: 24 kW (32.63 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 115 t, table width: 1,250 mm, table length: 3,000 mm, total length: 3,520 mm, total width: 1,460 mm, total height: 2,140 mm, overall weight: 3,500 kg, • Outer dimensions: L 3520 x W 1460 x H 2140 mm • Weight: approx. 3.500 kg • Total installed electrical power: 24,1 kW, main supply fuse: 25 A • Power supply: 3Ph 380 (400) V • Press area: 3000 x 1250 mm • Press force: 115 t • Specific pressing pressure: 30 N/cm2 (3,1 kg/cm2) • Operating hydraulic pressure: 380 bar • Cylinder (piston) diameter: 80 mm Iedpfxsyv H Rhj Abgotf

Condition: excellent (used), Shelf length 2500 mm Isdpfjyw H H Sex Abgotf Shelf width 1300 mm 4 hydraulic pistons Clearance 400 mm Water heating

Condition: used, Year of construction: 2004, functionality: fully functional, ORMA NPC-4-70 Shelf Press – after technical inspection, ready for operation Specification: • Condition – used, fully serviced • Manufacturer – ORMA • Model – NPC-4-70 • Shelf dimensions: 250 x 130 cm • Max. clearance between shelves: 480 mm • Shelves are straight, clean, with no dents/damage • 4 cylinders with 70 mm diameter • Max. pressure: 300 bar • Max. pressing force: 70 tons • Automatic pressure compensation in case of pressure drop • Shelves convertible for water/glycol or oil heating • Circulation pump and heating boiler included • Maximum power consumption: 20 kW • Equipped with safety pull-cord • Original paint finish • Weight approx. 3,000 kg • Year of manufacture: 2004 • Overall dimensions: 310 x 190 x 210 cm (L x W x H) Additional Information: • Good technical condition, after complete seal replacement Itodpfx Abjyxdluogsf • Photos show the actual item for sale • Possibility to power on and inspect the machine on site • Auction price excludes VAT and transport costs Financing & Transport: • We organize transport using MDD fleet, courier services, or external carriers • Financing options available through leasing or lease-loan arrangements

Condition: excellent (used), Year of construction: 1988, Manufacturer: Agostino Colombo Iedjxnx Hiepfx Abgotf Model: G 1600 Year: 1989 Condition: Used Stock number: 0386 Press force: 1600 tons Number of pressure points: 2 Ram stroke: 135 mm Ram adjustment: 20 mm Die height from die holder cbra: 635 mm Die holder table size: 1,060 x 900 mm Lateral passage in the frame: 400 mm.

Condition: new, Year of construction: 2023, Pressing area: 3000 mm x 1800 mm Number of manual hydraulic cylinders vertical: 4 Number of manual hydraulic cylinders horizontal: 2 Press pressure: 1500 kg Iedpsiwfhwjfx Abgstf Machine length: 4000 mm Machine width: 750 mm Machine height: 2250 mm

Condition: new, Year of construction: 2025, table size: 3000mm x 1500mm pressure: -0,85 bar machine length: 3100mm Itedpfx Aoipv Nrsbgjf machine width: 1450mm weight: 425kg

Condition: used, Gluer for slats Itsdpoyknlbsfx Abgsf

Year of construction: 2024, condition: new, functionality: fully functional, Hydraulic pressure gauge, pressure indicator 500 bar Application: Itodpsthiddjfx Abgjf - shelf presses Specification: - indication range from 0 to 500 bar -max working pressure - 300 bar - large display with a diameter of 116mm - fi inside 104mm - depth without valve 57mm - depth with valve 97mm - additional contact for automatic pressurization to the preset value Additional information: - the photos shown illustrate the actual condition of the object of sale - the price given in the auction is a net price

Condition: used, Dimter Profipress L 2500 Year of manufacture: 2006 Dimensions: • Lamella width (for panels): 30-150 mm • Thickness: 11-60 mm • Infeed length: 800-2500 mm • Panel width: variable, up to max. 1300 mm • Infeed width per cycle: min. 650 mm / max. 1300 mm • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz Itodeyhggrepfx Abgsf • Electrical connection rating for 40 kW RF generator: 56 kW

Condition: excellent (used), Year of construction: 2006, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Isdpsyw Aicsfx Abgstf Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 100mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 2600 X 1050 x 50mm Itsdpsh Txl Isfx Abgsf 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Self weight 1350kg. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 3000 X 1250 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Self weight 1200kg. Glue spreading machine LISY DVORAK NL200 included in price. Itedpfxekd Drhj Abgjf Very good condition. Available immediately.

Condition: used, A fully assembled and working pellet production line with a capacity of up to 3 tons per hour is for sale. The factory is little used – only 16,000 tons were produced, it is in very good technical and visual condition. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. No additional premises are required for the installation of the plant, the pellet press is already built into the container. The line includes: Press and mill: Salmatec Maxima 700 – reliable German quality with high efficiency and long-term stability. Transport and dosing equipment: Rematec – robust and accurate material supply at all stages. Tent shelter. Additional equipment: cyclones, sieves, cooler, control panel, etc. Itsdpfx Absx S Egmjgsf All DWG files, drawings for the foundations of the equipment are available. Main advantages: Large production capacity – up to 3 t/h. High quality components from European manufacturers. Ability to adapt to usage of different raw materials. Line in working order – can be demonstrated in operation. Available immediately.

Condition: used, Complete pellet production line with a maximum capacity of up to 5 tons per hour (limited by dryer capacity). Pellet Presses (3 units): CPM 7122 CPM 7922-2 CPM 7930-4 (only ~200 working hours) Hammer Mills (3 units): Maier hammer mill for wet material Itedpoyvz Afofx Abgef Maier hammer mill for dry material Kamas hammer mill (for burner material production) Cooling System: CPM pellet cooler Additional Information: Electrical and control systems are fully integrated into container units Production line has been in operation for approximately 2 years Belt conveyor, reception hopper 4 kW Dryer: distributor reception hopper 2,2 kW Conveyor belt, reception hopper 2,2 kW Worm conveyor for drum dryer 2,2 kW Drum dryer 7,5 kW Main cyclone 90 kW Sluice head cyclone 7,5 kW Fan cyclone 18,5 kW 1 Sluice cyclone 1 2,2 kW Sluice cyclone 2 0,55 kW Sluice cyclone 3 0,55 kW Worm conveyor for cyclones 1-3 3 kW Hammer mill – Maier 160 kW Hammar mill for dust burner – Kamas 110 kW Hammar mill for woodchips – Maier 132 kW Worm screw for elevator 4 kW Elevator for buffer pocket 7,5 kW Buffer pocket high/low 8/4,5 kW Scraper conveyor for the presses 2,2 kW Worm screw for dust mill 2,2 kW Press 1 CPM: Model: 7122 Main engine 160 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Grease lubrication 0,18 kW Press 2 CPM: Model: 7922-2 Main engine 250 kW 200 kW Cascade mixer 7,5 kW Feeding screw, frequency converted 2,2 kW Oil lubrication 1,5 kW Feeding screw 4 kW Press 3 CPM: Model: 7930-4 Work only 200 hours Main engine 250 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Oil cooler 2,2 kW Grease lubrication 0,18 kW Conveyor for warm pellets 2,2 kW Belt conveyor to the refrigerator 2,2 kW Pellet refrigerator, outflow 1,5 kW Fan for the pellet refrigerator 11 kW Fan for the suction 5,5 kW Elevator 2,2 kW Belt conveyor 1,5 kW Belt conveyor 4 kW Combustion air fan 45 kW Conveyor fan 22 kW Conveyor fan 11 kW Silo filter 0,04 kW Filter fan 4 kW Screw for dust silo 2,2 kW Driving motor for dust silo 1,1 kW Oil pump 1,5 kW Dosing screw 0,75 kW Sluice feeder 0,37 kW

Condition: used, used, good condition Manufacturer Joos Model HP65/2 1 level Itodpjyu U Evefx Abgof Plate size approx. 2500 x 110 mm Opening width approx. 360 mm Side guide Electric heating Aluminium plates Piston diameter 80 mm 4 lower pistons Space requirement approx. 2900 x 1300 x 1900 mm Weight approx. 3200 kg Total connected load 15.4 kW Storage location 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, without warranty or guarantee

Condition: used, used, in good condition Manufacturer: Joos Model: HP65/2 Machine no.: 79/9 510 1 deck Iodpfx Abjyu U D Segotf Cover plates - natural aluminum GS tested Panel size: 2500 x 1100 mm Opening width approx. 360 mm Tip control Safety device: foot rail - shutdown Side guide Electric heating Piston diameter: 80 mm Lower pistons: 4 units Space requirement approx. 2900 x 1300 x 1900 mm Weight approx. 3200 kg Total connected load 15.4 kW Stock location: 97447 Gerolzhofen, loaded free, unpacked Delivery in current condition as inspected, without guarantee or warranty

Condition: new, Year of construction: 2026, Table size: 3000 mm x 1400 mm Itodpjvzbbysfx Abgef Operating vacuum: -0.9 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Noise level: 70 Db Heating system temperature: max. 140 °C Heating power: 24 kW Machine length: 3100 mm Machine width: 1750 mm Machine height: 2200 mm Weight: 950 kg

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Itodpfxju Egp Ie Abgef Noise level: 70 Db Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Condition: used, Year of construction: 1989, pressing area: 2500mm x 1100mm opening: 400mm heating: elektrisch plate surface: ALU - Gold eloxiert Emergency stop switch: yes Iodpfsyl Tinjx Abgstf pressure: 65t number of cylinder: 4 electricity: 22A machine length: 3500 mm machine width: 1300mm weight: 3000kg

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 120 t, Hidrobrasil Glulam Press – Glulam Beam Press – 12,000 mm – 12 × 10 t Cylinders For sale is a hydraulic glulam press manufactured by Hidrobrasil, designed for the production of glulam beams up to 12,000 mm in length. This machine is engineered for industrial manufacturing of laminated timber beams and offers high flexibility in the pressing process thanks to cylinders that can be controlled individually or in groups. The system also enables production of curved components by using appropriate molding forms. ==== Technical Data & Information: Hydraulic Glulam Beam Press ==== General Information - Manufacturer: Hidrobrasil Itsdjg Tzbaspfx Abgjf - Model: Glulam Press - Machine type: Glulam Beam Press - Design: Hydraulic beam press - Application: Glulam/laminated timber production ==== Working Range - Max. workpiece length: 12,000 mm - Max. width: 150 mm - Max. height: 600 mm (depending on wood type and construction) ==== Pressing System - Number of cylinders: 12 units - Pressing force per cylinder: 10 t - Individual or group control possible ==== Operating Speeds - Downward speed: 10 mm/sec - Upward speed: 25 mm/sec ==== Hydraulics - Components: Bosch Rexroth (except cylinders) - Hydraulic unit: external, located behind the press - Oil tank: 500 l - Motor power: 15 kW ==== Control System - Control panel for individual or group cylinder operation - Adjustable pressure holding time ==== Special Features - Production of both straight and curved glulam beams possible - High flexibility through modular cylinder control ==== Wood lamination, glulam manufacturing, timber construction, laminating, industrial wood processing Hydraulic press, hydraulic press, gluing press, glulam beam press, lamination press, laminated timber line, wood press, industrial press Are you looking for a hydraulic press tailored to your specific requirements? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directive, the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these standards. Our key strength is special-purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly competitive prices. Hydraulic systems mainly utilize components from leading European manufacturers.

Condition: good (used), Year of construction: 2012, machine/vehicle number: EC1-065-2500, functionality: fully functional, We are offering this well-maintained ALTEC Maschinenbau Powerline 065 PowerLine PL-065 pressure beam/gluing press from 2012. Itsdpfx Aboyuvc Ajgsf

Condition: good (used), Year of construction: 1990, 1x HOT PRESS for VENEER “SORMEC” TYPE 350X130 Hydraulic hot press for wood, panels, furniture, doors, composites, and various materials Technical data: Platen dimensions: 3500 x 1300 mm 1 USEFUL WORKING PLATE Platen heating by hot water Total pressure: 50 tons Opening: 300 mm 8 cylinders, diameter 85 mm Water boiler not included Overall dimensions: 4500 x 1600 x 2500 mm (H) Itodpfxoyv Izbe Abgef Weight: approx. 5000 kg Second-hand, in good condition

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, table width: 4,200 mm, table length: 1,300 mm, HOT PRESS FOR EDGE-GLUED PANELS ORMA MOD. LS 42/13 AS / BO – CE RULES - N. 10 press cylinders - N. 5 platen cylinders - N. 8 front cylinders - Top-down pressing system - Continuous working capability - 45 kW diathermic oil boiler - Platen dimensions 4200 x 1300 mm - Complete with loading/unloading system Itedpoywcg Iefx Abgof - 250 mm glue spreader - Year 2005