Condition: good (used), Year of construction: 1995, machine/vehicle number: 735, functionality: fully functional, power: 4.65 kW (6.32 HP), input voltage: 380 V, input current: 10 A, Lamina press, Höfer, Koptronik model Component/Press area: 2500 mm x 1350 mm Component width, max.: 600 mm Pressing time: adjustable via timer Gsdpfxozccrtj Akyouc Pressing pressure: adjustable separately in the vertical and horizontal directions.

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Guedpfx Aevvkmbokyjc Storage location: Nattheim

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Storage location: Nattheim Gujdpfx Aevvkl Dskyjc

Condition: excellent (used), Year of construction: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. General Features: - Robust construction - Very user-friendly and economical to operate - Easy maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Circuit diagram - CE compliance - Operating manual Technical Data: - Motor power: 7.5 kW, 400 V, 50 Hz connection - Number of press cycles per minute: 14 - Throughput: 60 – 100 kg/h (material-dependent) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Hydraulic tank capacity: approx. 180 liters Guodpfx Akowyc H Teysc - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Including approx. 2 m briquette discharge pipe Note on used machines: - Specifications are subject to change and prior sale. - All prices are ex works – free loading at location. - The machine has been cleaned and tested for functionality. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. - Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Godpfsy Egkgox Akyouc Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: good (used), Code: 0328 Brand: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE Standard Hydraulic press for composite materials and solid surfaces, moulds and decorative panels, suitable for use in the aerospace, aviation, woodworking, furniture, interior design, automotive, shipbuilding, construction, energy, defence, sports and public transport sectors, and various – CE Standard – Year 2005 Technical data: N°5 solid steel plates 1450 x 500 mm N° 3 pistons Diathermic oil heating Total thrust 420 tonnes Working diagram - see enclosed diagram Max power 9,3 Kw Full-load current 19 A The oil tank is located on top of the press and is fitted with a sight glass for checking the oil level Fluid (oil) temperature controller Two-hand control for closing the press Photocell safety barriers Gedpfjyuyl Iex Akyouc Fixed safety guards

Condition: good (used), Code: 0283 Guedpfx Asyazdiekyoc Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

Condition: good (used), Code: 0279 Brand: ALBERTI V. Model: PCC 33/18 Continuous cycle hot press for veneering, furniture, doors, panels, composite materials and various Max working length 3300 mm Max working width 1800 mm Gedpsx I Nz Hefx Akyeuc Opening 200 mm N° 6 pistons diameter 100 mm Solid platens Diathermic oil heating Loading conveyor

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Godpfepvk Dijx Akyeuc Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Condition: good (used), Code: 0223 Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Gjdpfexmhcdjx Akyouc Movement from bottom to top Motor power Hp 4

Condition: good (used), Code: 0119 Brand: KOLMAG - ITALY Model: PGP 600 F Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Press modular structure with heavy thick plates without weldings and worked by tool machine Oleodinamic plant with pistons prefilling system in order to have a quick opening and closing of the platens Godpfswk Ntzsx Akyouc Dimensions of massive steel platens mm 1600 x 500 - Thickness mm 60 with electric resistances - Max temperature 260°. N° 3 pistons diameter mm 240 Pressure kg/cm2 56 Thrust Tonn 450 Safety photocells Hydraulic power unit Kw 7,5 Power absorbed heating platens 31 Kw Control board with pressure control gauge - Timer for platens opening - Telethermometer to regulate upper platen temperature - Telethermometer to regulate lower platen temperature - Switches for opening and closing of the platens - Emergency push button Overall dimensions mm 2250 x 1700 x 3300 h Weight kg 9000

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Guodpfx Aepbvqvekyec Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Pneumatic press for edge-gluing wood panels. TECHFA type PTD 6000 Max. dimensions of glued elements: Gedoyivr Hjpfx Akyouc - length: 6300 mm - width: 160 mm - height: 850 mm Press is divided into 4 sections.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Gusdpfx Akoxmr Rxoyec Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Briquette press Manufacturer: Weima Type: TH 800 S Year of manufacture: 11/2019 Godezcf Epepfx Akysuc Briquette press for highly compressed, round briquettes Briquette diameter: 80 mm Control cabinet with Siemens Simatic PLC control system Main motor (hydraulics): 22 kW Pressure: 250 bar Voltage: 400 V, 50 Hz Current: 55 A Fuse rating: 63 A Weight: approx. 3000 kg

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 2,200 mm, workpiece width (max.): 800 mm, workpiece height (max.): 40 mm, stroke length: 150 mm, machine/vehicle number: 52850199, TECHNICAL DETAILS Maximum plate size: 2,200 x 800 mm Maximum plate thickness: 40 mm Maximum stroke: 150 mm Working pressure: 6 kg/cm² Total working pressure: 160 tons MACHINE DETAILS Total power: 17.3 kW Heating power: 13 kW Voltage: 380 V Current: 35 A Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,800 x 2,100 mm Weight: 5,900 kg Gusdpey Tn R Rsfx Akyec EQUIPMENT Heating 8 cylinders, each with a diameter of 100 mm Heating boiler included

Condition: used, Year of construction: 1995, Technical details: punching pressure: 25 (250kN) t pass through width: 1800 (1660 nutzbar) mm daylight between the columns: max./min.: 155 / 25 mm stroke: Stanzhub: 130 mm total power requirement: 5,0 kW weight of the machine ca.: 2,0 t Dimensions (LxWxH): 2,3 x 1,0 x 2,2 m Hydraulic trolley beam punch hydrl. pressure 250 bar Gjdeu Szfuepfx Akyeuc Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec. Operation via control panel and pressure switch/control lever Equipment: 2x feed rollersØ 120 x 1630mm pneumatic close/open *

Year of construction: 1989, condition: used, Technical details: table length: - mm table width: - mm table load: - t total power requirement: - kw weight of the machine ca.: 8,0 t dimension working table: ca.4,5x3,1x1,2 m TRANSFER TABLE - TRANSFER TROLLEY - TOOL CHANGING SYSTEM Possible application: for press tools/devices as interchangeable trolleys in press lines Guodsu N D R Depfx Akyoc *

Condition: used, Year of construction: 2024, New display machine! List price: €32,665,- complete in standard configuration with: Sturdy, torsion-resistant steel frame constructed with welded and bolted assemblies. Louvered top press beam with 6 elements; louvered side press beam with 5 elements. Louvered press beams feature the proven Ganner system tolerance compensation for tightly pressed carcass joints. Counterpressure surfaces (side pressure wall and bottom) are 38 mm thick, coated, continuous support plates. Continuous pressing surface with a height of 95 mm at the lower vertical press beam. Electromotive adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and running accuracy) and high-performance running nuts with grease reservoir. Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW). The pressing force of the press beams is continuously adjustable via 2 potentiometers and controlled electronically by frequency converters, ensuring absolutely wear-free force control. Pressing force for the horizontal press beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing force for the vertical press beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing and adjustment speed of the press beams with fine positioning, selectable via three-position rotary switch: 5 / 10 / 25 mm/second. Very simple operation using 6 separate push buttons; 8 movement sequences selectable via control system. Freely adjustable pressing time preselection with automatic opening from 0–30 min (switchable to seconds or hours). Working height/feed height: 300 mm. Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm. Weight: approx. 1800 kg net. Dimensions (Length x Width x Height): 3.45 m x 0.95 m x 2.30 m. Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A). Additional equipment: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speeds of 5 / 10 / 25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for pressing special components. 1 set of machine feet (working height 500 mm). Storage location: Guedpfxjuf Hx Hj Akyjc

Condition: used, Year of construction: 2025, New demonstration machine! MOVE — the high-precision vacuum press with gigantic usable area for vacuum lamination and vacuum veneering of curved workpieces. Offers extensive flexibility thanks to absolute mobility and a revolutionary folding mechanism that reduces the footprint to 45% when folded. High-precision vacuum press with folding lid, including: Godpjyi Hd Hofx Akyjuc - Revolutionary folding mechanism (reduces footprint to 45%) - 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) by BECKER - Optional automatic shut-off when pressure is reached (especially for large vacuum volumes) - Pressure regulation: 400 to 900 mbar, analog vacuum gauge - Highly elastic natural rubber membrane (up to +130 °C) - Quick-change membrane system - Robust phenolic resin work surface (up to +120 °C), 15-ply bonded - Gas struts for lid opening - Vacuum gauge - Connection for external vacuum bag - Smooth-running swivel castors - FESTO pneumatics and SIEMENS electrical components Technical specifications and dimensions: - Usable area: approx. 3050 x 1350 mm - Inner frame dimensions: approx. 3130 x 1430 mm - Total dimensions: approx. 3700 x 1700 x 1100 mm - Total dimensions (folded): approx. 3700 x 770 x 1780 mm - Electrical connection: 1~, 0.8/1.0 kW, 230 VAC +/- 10%, 50/60 Hz - Weight: 670 kg Location: Rieth

Condition: used, functionality: fully functional, Orma C4 veneer press, shelf type, 2200x1200 Guedpszaiimefx Akysc Shelf length: 2200mm Shelf width: 1200mm Maximum clearance between shelves: 475mm Maximum operating pressure: 150 bar Press with 4 actuators Hydraulic pump motor: 1.1 kW Shelves heated using hot water from the central heating system.

Condition: used, Year of construction: 2003, machine/vehicle number: 0-306-04-2737, working width: 800 mm, conveyor belt length: 4,800 mm, feed rate X-axis: 37 m/min, working height: 1,400 mm, working length: 2,300 mm, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Workpiece width max.: 800 mm Workpiece length max.: 2,300 mm Workpiece height max.: 1,400 mm Feed rate max.: 37 m/min MACHINE DETAILS Godpey Uwmqsfx Akyouc Machine length: 4,800 mm EQUIPMENT Infeed conveyor Outfeed conveyor The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8536

Condition: used, Year of construction: 2002, machine/vehicle number: 0-306-04-1262, working width: 600 mm, conveyor belt length: 3,000 mm, feed rate X-axis: 40 m/min, working height: 1,300 mm, working length: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine must be picked up between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Workpiece width max.: 600 mm Workpiece length max.: 2,500 mm Workpiece height max.: 1,300 mm Workpiece width min.: 120 mm Workpiece length min.: 300 mm Gusdpfxsy Uv Iys Akyec Workpiece height min.: 300 mm Feed rate max.: 40 m/min Conveyor belt length: 3,000 mm MACHINE DETAILS Control system: NC 16 EQUIPMENT Unloading conveyor belt CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8535

Condition: excellent (used), Quick-acting glue press Ruck Zuck WP 12/2 - pneumatic - 12 pressing stations, each with dimensions of 1400 x 800 mm Gjdpfsy Tm Afjx Akyjuc

Year of construction: 2014, operating hours: 1,000 h, condition: like new (used), functionality: fully functional, The KraussMaffei polyurethane injection presses are designed specifically for high-volume off-site timber frame production. With large 12.5 m × 3.3 m platen capacity and up to 260-ton clamping force, they allow full wall panels to be injected and in a single operation—delivering consistent insulation, structural stability, and repeatable quality. Integrated high-pressure metering and mixing systems ensure precise polyurethane dosing, while automated conveyors and positioning systems streamline panel loading and alignment. The result is faster cycle times, reduced labour, and factory-controlled insulation performance—making large-scale offsite timber frame manufacturing more efficient, predictable, and scalable. In short: Gsdpfxjyrh Ifo Akyeuc Factory precision. Faster panel production. Consistent injected insulation for modern timber construction.