Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, documentation/manual, • Suitable for pressing veneer, fire-resistant panels, decorative paper, etc. Laedpozhv Svofx Agpod • Suitable for laminating furniture panels, partition walls, wooden doors, or for laminating all kinds of decorative materials onto composite boards. • The press can also be used for drying or smoothing veneer. Pressing force 100 tons Dimensions of heating plate 3000 × 1300 × 42 mm Number of working layers 1 layer Number of heating plates 2 pcs. Distance between heating plates 200 mm Surface roughness of heating plate Ra ≤ 1.6a (2.5 μm) Cylinder diameter Ø 85 mm, material: steel Number of cylinders 8 pcs. Power of hydraulic press motor 5.5 kW Heating method Heating oil Heating power 24 kW Power of circulation pump 1.5 kW Pressure per cm² 3.07 kg/cm² Maximum heating temperature 130°C Press dimensions 4200 × 1670 × 1900 mm Press weight 5300 kg

Condition: used, Press pressure max 104 t working length ~ 3.100 mm Working width 4 x 240 mm workpiece height max. 490 mm Wemhöner VS 4 S heavy-duty hydraulic strip or beam press for veneering strips, gluing wood, glulam beams, or other pressing tasks. The press has four independently controllable pressing surfaces. Lasdpfjy Emwasx Agpsd A glue applicator is also available.

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. Laedpowd N Rmsfx Agped The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Lodpfsfh Tmmjx Agpoad Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: excellent (used), MAWEG Gluing Press Machine frame inclined at 10 degrees Single-sided loading Horizontal beam with manually adjustable height via hand crank (all clamping cylinders can be adjusted together) Hydraulic cylinders with quick clamping function, infinitely adjustable Manual hydraulic cylinder clamping Pressing force per hydraulic cylinder approx. 2000 kp Hydraulic cylinder stroke 100 mm Clamping depth 100 mm Maximum clamping length: 2800 mm Maximum clamping height: 1800 mm 4 vertical pressing cylinders 2 horizontal pressing cylinders Laodpsyyn E Usfx Agpod 6 counter-stops Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are ex-location and are pick-up prices – loading included! • The machines have been cleaned and function tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Lsdpoxgpaqsfx Agpsad Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: excellent (used), Year of construction: 2006, We sell the Mambranpress for kitchen doors, doors, or door frames, etc. Lajdpfszmnyiex Agpjd Producer ORMA Macchine, Model: PM Air System 25/14 Year 2006. Area 2500 x 1400mm. / 1 Table PIN system for edge binding. Possible to see at work. Documentation included

Condition: like new (used), Various inserts for the Maweg gluing press. Lsdjfl Ikkopfx Agpoad Various dimensions, mostly unused. Made of laminated oak.

Condition: good (used), Obel Pedersen High-frequency continuous belt press Opel-Pedersen press, type 2412 Press length 2500 mm, width 600 mm with glue application system, stacking table, Laedpfx Agedybr Rjpod HF generator T20 V and water cooling System has been dismantled.

Condition: excellent (used), Figure 1 provided by the manufacturer as an example. Remaining images are original. Manufacturer: Minda Designation: Timper Press V 200 Technical data: Main pressing force from below: Number of press chambers: 2 Maximum lamella width: 270 mm Maximum glue-laminated timber length: up to 18 m Glue-laminated timber profile: straight Lateral alignment of the lamellas: included Pressing system: hydraulic Permanent pressure control: included Packaging: separate Loading/unloading: in the longitudinal direction Lajdpohtd E Asfx Agpjd

Condition: used, Dimter Profipress L 2500 Year of manufacture: 2006 Dimensions: • Lamella width (for panels): 30-150 mm • Thickness: 11-60 mm • Infeed length: 800-2500 mm • Panel width: variable, up to max. 1300 mm • Infeed width per cycle: min. 650 mm / max. 1300 mm • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: Ljdpjyhggrefx Agpoad • Operating voltage: approx. 400 V / 50 Hz • Electrical connection rating for 40 kW RF generator: 56 kW

Condition: excellent (used), Year of construction: 1993, machine/vehicle number: 221/93, functionality: fully functional, Connection value 380V 16A Pneumatic connection 6 bar Lodjk Tzwdopfx Agpsad Total length of the machine 4300 mm Total machine width 1300 mm maximum pressing length 2650 mm Press width 1000 mm Press height 1000 mm Press pressure up to 150 bar electrical width adjustment with digital display Footswitch for pressing

Condition: not inspected (used), Year of construction: 1975, Power connection: 400V, 13kW 2 heating plates, each measuring 1200 x 2250 mm Heating plates controlled by 2 thermostats Pressing pressure: 250 bar Dimensions (L x W x H): 2590 x 1330 x 1950 mm Weight: approximately 2800 kg Press stroke: 380 mm Ledpfx Aokkflbegpjad

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), Ott veneer press connected load 380V 9kW Panel size 2250 x 1350 mm Elkom heating plates, gold anodized Plates and hydraulics in order Lsdpfx Agetwp Iwopjad

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 370, total width: 2,500 mm, total height: 4,000 mm, total length: 7,000 mm, overall weight: 14,000 kg, type of input current: three-phase, space requirement width: 2,500 mm, space requirement length: 7,000 mm, space requirement height: 4,000 mm, input voltage: 380 V, oil tank capacity: 200 l, pressure: 300 bar, operating pressure: 250 bar, power: 37.51 kW (51.00 HP), year of last overhaul: 2023, noise level: 80 dB, Equipment: cooling unit, emergency stop, *Selling mobile wood briquetting system. *Press: Ruf RB440, output > 2 tons/hour. *Briquet dimensions: L 150 x W 80 x H 80 - 110 mm *Press completely overhauled, with all supporting documentation. *Truck with valid TÜV (technical inspection) until Jan. 2026, ready for use, also suitable for use in environmental zones / green license plate / tax-free!!! Classified as a self-propelled working machine. *PE packaging bags for approximately 90 tons, included. *Hydraulic pump Linde > New. *Gearbox discharge > New. *Suction fan motor 7.5 kW > New. *Complete hydraulic oil change with oil filter 200L > New. *Many spare parts available due to business closure. *Truck: MAN 14.232, 335,937 km, built in 1990. *Truck with new, reinforced flatbed body!! Manufacturer: Suhr. *TÜV > New. *Tires, all 6 > New. *Brakes on front axle newly replaced. Ledpfewhw Syex Agpead *Everything is sold with training provided. *If interested, please contact us by email.

Condition: excellent (used), functionality: fully functional, Stromab STA 2500 pneumatic assembly press Working length: 2500 mm Working width: 1200 mm Lodpfxjzhv Tyj Agpsad Clamping force at 8 bar: 2600 kg 2x side clamping Pneumatic control CE certified

Condition: good (used), Year of construction: 1994, Max pressure space : L 1900 x H 1800 mm Incl. OBEL-P High Frequenz unit. Chair seat bending : 3-4 min. pr cycle. Still connected to power. Lsdpfx Agjzi Hpujpsad Can be examined in working condition. 1). 3D pressure can meet different shapes of plywood bending requirement and help customer develop more designs. 2). HF heating is dielectric heating. It heats products by friction of water melocules, fast, uniformly and effective 3). HF power is selective heating. It focus on glue heating but not heat the wood material, saving energy. 4). High quality. After pressing, plywood shape is steady and hard to change. 5). HF bending press can work with metal mold, plywood mold as well as MDF mold. There are more choice for end user. Customer can make mold themselves easily. 6). HF power needs only electricity, clean and dust free.

Condition: used, Year of construction: 2003, power: 250 kW (339.91 HP), CPM 7930-4 Pellet Mill High-capacity pellet production machine manufactured by CPM. Designed for processing wood, biomass, animal feed and other pelletizable materials into pellets. The machine has been used for only one season and is in very good technical condition. Equipped with: Electric motor: 250 kW Mixer Feed screw conveyor Complete set of rollers Die Manufacturer: CPM Model: 7930-4 Laedpszlgxbjfx Agpjd Year of manufacture: 2003 A key machine for a complete pellet production line – ready for installation and operation.

Year of construction: 2015, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: M15090L, For sale is a high-quality vacuum membrane press from Columbus Presstechnology. Type: Multimat Sonder Model: M15090L Year of manufacture: 2015 The machine is in good, well-maintained condition and is immediately ready for operation. Technical data: Voltage: 400 V / 50 Hz Power: 19 kW Suction capacity: 40 m³/h Vacuum: up to -0.9 bar Temperature range: up to 140 °C Equipment / Condition: Fully functional and ready for use Robust industrial design Membrane included (used but functional condition) Lsdsy I Uguopfx Agpoad User-friendly controls Ideal for woodworking, furniture, or plastics processing Applications: Veneering Foil lamination Mold making / plastics processing Prototype production Inspection is possible – the machine is ready for use.

Condition: used, Year of construction: 1991, Used frame press pneumatic Working size 3500 x 2500 mm with center pressure beam absolute angular accuracy without correction comfortable working height due to adjustable press corners Lodpfx Agjw I Un Rjpead operation of the working cylinders via 2 compressed air valves all press corners are adjustable pressure adjustable from 0-15 bar Availability: short-term Storage location: Röllbach

Condition: used, Year of construction: 1993, Used machine Year of construction 1993 Automatic frame press Working area 3550 x 2400/2600 mm pressure range 120 bar Pressure per 21000 N/kp Cylinder stroke vertical 250 mm, horizontal 20 or 80 mm Automatic control Electrical connection Ledow I Ui Uopfx Agpead with medium pressure bar Special equipment: Impulse "Open press" Vertical positioning device Width compensation allowance for 1 MB 1 additional horizontal pressure cylinder Spring weight compensation Work safety device pull rope Installation dimensions 5150 x 1500 x 3340 mm Weight 2500 kg Electrical connection 3.5 kW Compressed air connection R 3/8" max 8 bar Availability: short term Location: Röllbach

Condition: ready for operation (used), Schöberl Gluing Stand can be moved on both sides 8 clamping elements, 4 per side 2 heating rails Lsdpszlwpqjfx Agpjad 2 pressure bars Condition: used Price: 1800

Condition: good (used), Code: 0421 Brand: ORMAMACCHINE Model: NPC - CE Standard Hot press with diathermic oil heating for wood, joinery, furniture, custom-made furniture, panels, doors, composite materials and various – CE Standard Platen sizes mm 3000 x 1580 Solid steel platens with diathermic oil heating N° 6 pistons diameter 85 Lajdpfezgtpijx Agpjd Opening mm 400 Platens heating by electric boiler Thrust 120 ton Guides side racks Mylar-coated platens Overall dimensions mm 3700 x 1850 x 2600 h

Condition: used, used good condition cleaned functionally tested partially refurbished Gluing stand Manufacturer: maweg Ledpfx Agszkvzcjpsad double-sided Number of press cylinders: 11 Cylinder stroke mm approx.: 30 manually hydraulic mobile Working length mm approx.: 1900 Working height / clamping depth mm approx.: 1800 Max. material thickness approx. mm: 50 Space requirement approx. L x W x H mm: 2000x1100x2300 Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in its current condition, as inspected without warranty

Year of construction: 2023, condition: new, Technical data of the briquetting press: Throughput: 30-60 kg/h The briquetting performance refers to a bulk density of the raw material of 200 kg/m³! Motor power: 5.5 kW Briquet diameter: 50 mm Weight: approx. 680 kg 1680 x 1100 x 1500 mm Equipment: - Automatic start/stop of the briquetting press via rotary vane probe - Inspection cover - Transport tube holder for the briquetting press - Viewing window in the container Requirements for the raw material for briquetting: Laodpfx Agskuz Tujpsd - The moisture content (dry basis) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The customer must ensure protection against hydraulic oil leakage - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result. The sieve of the shredder should not exceed a size of 10/12 mm.