Used vertical turning lathes for sale (240)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 6,000 h, functionality: fully functional, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 30 m/min, turning diameter: 450 mm, total length: 8,720 mm, total height: 3,888 mm, total width: 4,325 mm, type of input current: three-phase, torque: 585 Nm, overall weight: 18,000 kg, controller model: Siemens 840 D sl, For sale: Hessapp DVT400, year of manufacture 2022. Dodpfjw D Apcjx Agdskg Equipped with a Siemens 840 D sl control system. Features: - Infeed and outfeed conveyor - Chip conveyor (discharge right side) - 2x tool carriers, 12x VDI50 each The machine is powered and can be inspected.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: V16TC1548, workpiece weight (max.): 8,000 kg, workpiece diameter (max.): 2,000 mm, faceplate diameter: 1,600 mm, workpiece height (max.): 1,350 mm, faceplate torque: 18,000 Nm, TECHNICAL DETAILS Faceplate diameter: 1,600 mm Maximum faceplate torque: 18,000 Nm Maximum thread milling diameter: 1,800 mm Maximum facing diameter: 1,800 mm Maximum distance between the faceplate and the clamping surface of the inserted tool slide: 1,550 mm Slide dimensions: 220 × 220 mm Maximum workpiece diameter: 2,000 mm Maximum slide stroke: 900 mm Maximum workpiece height when using the 200 mm tool holder: 1,350 mm Maximum workpiece weight, depending on faceplate rotation: 8,000 kg Maximum tool shank diameter: 40 mm Maximum crossrail travel: 800 mm Crossrail feed rate: 170 mm/min Dkjdpexvxrbofx Agdeg Working feed rate: 1–2,000 mm/min Rapid traverse: 10,000 mm/min Feed per revolution: 0.001–50 mm/rev Rotating tool spindle speed, programmable in two ranges 1st range: 1–1,200 rpm 2nd range: 1,200–2,400 rpm Tool holder: ISO50 MACHINE DETAILS Total power requirement: 80 kW Dimensions & Weight Footprint approx.: 4.4 x 4.62 m Machine weight approx.: 25 t EQUIPMENT C-axis

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Turning Speeds: 5500 RPM Swing Diameter: 260 mm Dksdoxvw Hkopfx Agdog Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Machine length: 1685 mm Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.

Condition: used, Year of construction: 2014, Control Siemens 840DSL Dkjdpfxoxuv T To Agdog max. swing diameter 420 mm max. turning height 300 mm max. turning speeds 3400 min/-1 drive capacity - main spindle 45 / 35 kW max. torque 775 / 600 Nm chucking diameter 315 / 400 mm number of tool places 12 Pos. Shank diameter 40 mm x-axis 850 mm z-axis 315 mm rapid traverse (x/z) 45 / 30 m/min weight of the machine ca. 10,0 t dimensions of the machine ca. 4,2 x 1,5 x 3,5 m In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - driven tools - c-axis - Capacity for pieces diameter 30 to 160 mm : 32 [pos] - Capacity for pieces diameter 120 to 220 mm : 24 [pos] - Capacity for pieces diameter 120 to 340 mm : 16 [pos] The scope of delivery of the machine does not include a clamping device. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: repair required (used), Year of construction: 2006, functionality: not functional, machine/vehicle number: 00592, Technical Specifications: Work Area - Maximum clamping plate diameter: 200 mm - Maximum machining diameter: 130 mm - Maximum workpiece length: 110 mm - X-axis travel: 400 mm / Rapid traverse X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse Z: 30 m/min - Standard closed automation (number of loading stations by workpiece diameter): 14/(80...200 mm), 18/(30...160 mm), 30/(30...85 mm) Main Spindle - Spindle to DIN 55026, Size 6 - Maximum speed: 7,500 rpm - Power at 100%/40% duty cycle: 18 / 27 kW - Torque at 100%/40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool shank DIN 69880: 12x VDI40 - Number of turret stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6,000 rpm - Maximum torque: 37 Nm (10% DC), 26 Nm (25% DC), 14 Nm (100% DC) Electrical Equipment - Operating voltage: 3x 400–480 V, 50A - Connected load: 31 kW Dimensions - Overall dimensions: L = 2,680 mm (3,820 mm with chip conveyor), W = 2,040 mm, H = 2,400 mm - Weight: 5,500 kg Main Features and Capabilities: - Vertical design for optimal chip evacuation and easy loading/unloading - Control: GE Fanuc Series 18i-TB - High precision: Positioning accuracy in X, Z, and Y axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Integrated automation for part feeding and removal - Driven tools: Enables drilling and milling operations - Chip conveyor - Documentation: Electronic documentation unavailable, hardcopy/manual available Machine Condition: NOT OPERATIONAL - Driven tool motor defective Dkodpfx Aexwlbxjgdsg - Driven tool gearbox defective

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101458, Machine Data Sheet General Information Manufacturer: EMAG Machine Type: CNC Vertical Lathe Model: VL5 S Serial No.: 101458 Year of Manufacture: 2008 Technical Data Max. Chuck Diameter: 260 mm Max. Swing Diameter: 260 mm X-Axis Travel: 570 mm X-Axis Working Stroke: 250 mm Z-Axis Travel: 200 mm Conveyor Maximum Permissible Total Weight: 120 kg Conveyor Maximum Diameter: 220 mm Front Spindle Bearing Diameter: 110 mm Main Drive AC Asynchronous Motor Max. Speed: 4,500 (5,000) rpm Drive Power at 100/40% Duty Cycle: 18/27 kW Torque at 100/40% Duty Cycle: 202/303 Nm Dkjdoxtpi Sjpfx Agdeg Number of Tools: 12 pcs. Tool Holder DIN: 69880, Diameter 40 mm, Max. Tool Length 190 mm Chip Conveyor (Hinged Belt Conveyor): Discharge Height 1,250 mm Coolant Tank: 315 liters, 8 bar Control: Siemens 840 D Connected Load: 42 kW Voltage: 400V 50Hz Weight: approx. 6,500 kg Required Floor Space: 10 m²

Condition: used, Year of construction: 2010, functionality: unexamined, feed length X-axis: 250 mm, feed length Z-axis: 500 mm, power: 40 kW (54.38 HP), spindle diameter: 300 mm, EMAG VSC 7 ( YEAR OF MANUFACTURING - 2010 ) - 01 NO & EMAG VL 05 ( YEAR OF MANUFACTURING - 2012 ) - 01 NO Dkedpfx Agjx Rawdedeg

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S.1003825.001, faceplate diameter: 800 mm, workpiece length (max.): 800 mm, workpiece width (max.): 720 mm, TECHNICAL DETAILS Faceplate diameter: 800 mm Clamping diameter: 800 mm Max. workpiece dimensions: 800 x 720 mm Tool interface: Capto C6 Tool magazine positions: 2 x 80 MACHINE DETAILS Total power requirement: 110 kW Dsdpfx Agexvrhvjdskg Dimensions & Weight Approximate machine weight: 37,000 kg / total 52,000 kg Transport dimensions (machine): 5.07 x 2.98 x 3.90 m EQUIPMENT C-axis

Condition: used, Year of construction: 2005, Technical details: swing diameter: 320 mm control: 840 D SIEMENS turning speeds: 5000 1/min spindle drive: 20 / 27 kW chucking diameter: 250 mm travel -x axis: 650 mm travel -z axis: 300 mm turret head: 12 Pos. tool holder: VDI 40 toolpiece turning speed range: 4000 1/min work piece power: max. 11,7 kW weight of the machine ca.: 8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, Dkedpjmcibwjfx Agdog chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on" *

Condition: ready for operation (used), chuck outer diameter: 1,200 mm, controller model: E.C.S CNC 1402, empty load weight: 17,000 kg, 5000 kg maximaal op tafel KM 50 gereedschappen Djdpfx Agsxqh R Nedekg Max turningdia -- passage: 1400 mm Power on the spindle: 60 kW Max longitudinal travel X-axis: 2700 mm Max hight of workpiece Z-axis: 750 mm Number of speeds: 2-430 rpm - max 450 Nm Power needed: 3 x 380 V TOOLING: yes Turret: yes Qty Tools: 24 Coolant pump: yes Light: yes

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 68178, Technical characteristics: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 626 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 250 mm / Rapid traverse in Z: 30 m/min - Standard closed workpiece automation via gantry loader and individual nest conveyor system Main Spindle - Spindle interface according to DIN 55026: Size 6 - Maximum speed: 5,500 rpm - Continuous power (100% duty cycle): 38 kW - Continuous torque (100% duty cycle): 300 Nm Tool Turret with Driven Tools - Tool interface: VDI40 DIN 5480 - Number of positions: 12-station disc turret, all positions driven - Maximum speed: 6,000 rpm - Torque capacity per driven station: 70–100 Nm Electrical Equipment - Operating voltage: 2x400 V, 160A GL fuse - Connected load: 90 kW Dimensions - Total dimensions: Length = 3,390 mm; Width = 2,850 mm; Height = 2,400 mm - Weight: 16,000 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy workpiece loading/unloading - CNC control: Siemens 840D SL - High precision: Positioning accuracy in X and Z axes by Heidenhain linear scales - Main spindle (Weiss): High power and wide speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - Live tooling via Sauter turret: Extends machining capability to include drilling and milling - Cooling and paper filter unit: DGS System GMBH, 950L - Chip conveyor: DGS System GMBH - Hydraulic power unit: Rexroth, flow Q = 13 l/min, max. pressure = 65 bar - Mist extraction units: IFS model IFM1000 Dkodpfx Agsxwk Iwodeg - Documentation available: Yes Machine Condition: NOT WORKING - Loading/unloading sliding doors defective - Linear scale X axis (2 units) - Turret position sensor (furT30) - Spindle clamp/unclamp sensor - Emulsion solenoid valves (4 units)

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm number of tool places 8 Pos. tool taper Capto C5 max. workpiece diameter 50 mm max. workpiece weight 0,5 kg x-axis 450 mm z-axis 300 mm rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition Dksdpsxq Hkzefx Agdjg condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2010, Technical details: swing diameter: 260 mm control: 840 D SIEMENS turning speeds: 3.500 1/min spindle drive: 36 / 28 kW chucking diameter: 260 mm travel -x axis: 900 mm travel -z axis: 400 mm turret head: 12 Pos. tool holder: VDI 40 rapid power traverse in X-and Z direction: 100 / 30 m/min dimensions of the machine ca.: 5,3 x 2,4 x 3,31 m CNC vertical lathe with 2 spindles, 2x RÖHM power chucks dia. 315mm, * Dksdjtpq Urjpfx Agdeg

Condition: ready for operation (used), chuck outer diameter: 1,600 mm, controller model: E.C.S CNC 2600, Mario Carnaghi TG10/1600 - Ø 1700 mm CNC Max turningdia -- passage: 1700 mm Power on the spindle: 70 kW Max longitudinal travel X-axis: 1965 mm Max hight of workpiece Z-axis: 750 mm Number of speeds: 3.5 - 300 rpm TOOLING: yes Turret: yes Qty Tools: 12 Dkodpfx Agexqh R Ajdeg Coolant pump: yes Light: yes

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101868, Technical characteristics: Work Area - Maximum clamping plate diameter: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel distance: 570 mm / Rapid traverse in X: 60 m/min - Z-axis travel distance: 200 mm / Rapid traverse in Z: 30 m/min - Y-axis travel distance: 40 mm / Rapid traverse in Y: 30 m/min - Standard enclosed automation (number of loading stations by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Tool Carrier with Driven Tools - Cylindrical shank holders according to DIN 69880: 12 - VDI40 - Number of stations: 12 - Maximum tool length with holder: 190 mm - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 37 Nm, 25% duty cycle: 26 Nm, 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V - Connected load: 42 kW Dimensions - Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features and Capabilities: - Vertical Design: Optimal chip removal and easy loading/unloading. - Control: GE Fanuc Series 18i TB. - High Precision: Positioning accuracy in X, Z, and Y axes ±0.001 mm, equipped with Heidenhain linear scales. - Main Spindle: High power and wide speed range. - Automated Loading/Unloading: Workpieces are fed to and removed from the machine via integrated automation. Djdexwk U Depfx Agdjkg - Live Tooling: Capability of using driven tools, enabling both drilling and milling operations. - Chip conveyor Machine status: IN OPERATION

Condition: used, Year of construction: 2012, turning diameter 140 mm turning length 630 mm control Siemens 840 SL max. swing diameter over bed 250 mm turning speed range - main spindle 0 - 5000 min/-1 max. torque 256 Nm spindle bearing diameter 110 mm spindle bore 52 mm spindle head Gr. 6 DIN 55026 chucking diameter max. 250 mm number of tool places 3 x 12 Pos. tool taper VDI 40 max. tool weight 20 kg max. tool diameter 40 mm max. tool length 95 mm Dsdpfx Agoxqrgzodjkg max. workpiece weight 20 kg max. workpiece diameter 140 mm x-travel 300 mm z-travel 740 mm rapid traverse x 45 / z 30 m/min total power requirement 70 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 6,5 x 3,5 x 4,4 m In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Siemens S120 drive systems - 3x turret, all places AGW, 2x of them with y - axis - 2x main spindle, 1x with tailstock - Spindles total 5 pcs. - Tool monitoring, Artis - Total electronic axes: 21 pcs. Accesories: - chip conveyor - Radio probe, Renishaw - Cooling unit - Infeed and outfeed conveyor - suction There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: ready for operation (used), Type: TVM 450/5 Uitzonderlijke frees- en draaibank voor verticale bewerking die zeer grote werkstukken kan bewerken. Zowel de binnen- als de buitendiameter van de werkstukken kunnen worden bewerkt! De machine bestaat uit een vaste buitenkolom en een beweegbare binnenkolom. Dkodpoxqh Stefx Agdog Draaitafel: buitendiameter: 6300 mm binnendiameter: 3000 mm grootste diameter van het werkstuk: 9800 mm kleinste diameter van het werkstuk: 2220 mm maximaal gewicht op tafel: 300 ton rotatiesnelheid: 0,08 27 tpm rotatiesnelheid bij draaien/frezen: ,4 tpm Vaste externe kolom: ramafmetingen: 550 x 550 mm diameter van de spindel: 304,8 mm ISO 60 - 37 kW op spindel maximale hoogte van uitwendig draaien/frezen: 8700 mm min. hoogte van uitwendig draaien/frezen: 700 mm verticale slag: 8000 mm horizontale slag: 2030 mm Beweegbare binnenkolom: RAM-formaat: 280 x 280 mm max. diameter van inwendig draaien/frezen: 5180 mm min. diameter van inwendig draaien/frezen: 3048 mm max. hoogte van inwendig draaien/frezen: 5800 mm min. hoogte van inwendig draaien/frezen: 615 mm verticale slag: 5800 mm horizontale slag: 1120 mm Spiltoerentallen: 1,2 601 tpm Totaal vermogen: 250 kW 5-assige CNC-besturing

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 179056920, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance spindle nose to tailstock origin: 639 mm - X1/X2 axis stroke (effective travel): 335/289 mm / Rapid traverse X: 30 m/min - Z1/Z2 axis stroke: 560/494 mm / Rapid traverse Z: 30 m/min - Standard fully enclosed cabin with automatic door opening – manual or automatic loading possible Main Spindle - Spindle interface according to DIN 55026: Size A6 - Max. spindle speed: 4,500 rpm - Spindle power at 100%/40% duty cycle: 23/18 kW - Spindle torque at 100%/40% duty cycle: 146/115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Tool Turret with Driven Tools - Tool mounts cylindrical shank to DIN 69880: 8 × VDI 40 - Max. tool length: 130 mm - Number of stations: 8 - Max. turret speed: 4,500 rpm - Max. torque at 10% duty cycle: 27 Nm; at 100%: 14 Nm Djdexwmf Sjpfx Agdskg Turret Configuration X2/Z2: Tool Holder with Driven Tools - X-HOT unit for polygon turning, max. eccentricity (stroke): 8 mm - X-HOT tool holder interface: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length 3,000 mm (6,477 mm with chip conveyor), Width 3,000 mm, Height 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design: Optimum chip disposal, manual or automatic loading/unloading - Control: Siemens 840D for NC1 and NC2 - High precision: Positioning accuracy X/Z axes ±0.002 mm (Heidenhain absolute linear scales) - Powerful main spindle with wide speed range - Driven tools expand application range to include drilling and milling - Tool life monitoring - Chip conveyor coolant: Knoll - Coolant filtration unit up to 40 bar: Knoll FKA/1400 - Part detection system with low air pressure sensor - AUTOMATION INFRASTRUCTURE FOR ROBOT INSTALLED - Fully enclosed work area, work light included - Documentation: Available electronically and as printed manual Machine status: In working condition.

Condition: ready for operation (used), chuck outer diameter: 1,120 mm, total height: 4,100 mm, empty load weight: 16,500 kg, Type: Stanko 1512 Maximale werkstukhoogte: 1000 mm Verticale schuifmaat maximale horizontale verplaatsing: 775 mm maximale verticale verplaatsing: 700 mm Horizontale schuifmaat maximale horizontale verplaatsing: 630 mm maximale verticale verplaatsing: 1000 mm Dwarsbalk maximale slag: 660 mm Max turningdia -- passage: 1250 mm Power on the spindle: 30 kW Number of speeds: 5 > 250 rpm Long: 2750 mm Wide: 2975 mm Dkedpfx Ajxp Slbegdsg

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 101851, Technical characteristics: Work Area - Maximum diameter of the clamping plate: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse in Z: 30 m/min - Y-axis travel: 40 mm / Rapid traverse in Y: 30 m/min - Standard closed automation (number of loading nests by workpiece diameter): 14/(80...200), 18/(30...160), 30/(30...85) Main Spindle - Spindle mount as per DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Power (at 100 / 40% duty cycle): 18 / 27 kW - Torque (at 100 / 40% duty cycle): 202 / 303 Nm Tool Holder with Driven Tools - Cylindrical shank holders as per DIN 69880: 12 – VDI40 - Number of tool stations: 12 - Maximum tool length (including holder): 190 mm - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 37 Nm, 25% duty cycle: 26 Nm, 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 – 480 V - Connected load: 42 kW Dedpfxoxvy Azs Agdskg Dimensions - Overall machine dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading. - Control: GE Fanuc Series 18i-TB. - High precision: Positioning accuracy on X, Z, and Y axes ±0.001 mm, Heidenhain linear scales. - Main Spindle: High power and wide speed range. - Automated Loading/Unloading: Parts are loaded and unloaded via integrated automation. - Driven Tools: Use of live tooling extends processing capabilities to include drilling and milling operations. - Chip conveyor Machine Status: NOT OPERATIONAL - Lifetool Motor - X-axis optical scale defective + connection cable - Z-axis belt - Lubrication pressure switch - Hydraulic main pressure valve - Door safety switch (Euchner)

Condition: ready for operation (used), chuck outer diameter: 3,200 mm, total height: 7,155 mm, controller model: Siemens 840D, empty load weight: 65,000 kg, Type: SKD 32B Siemens 840D CNC-besturing 2017 Tafeldiameter: 3200 mm Maximale zwenkhoek: 3500 mm Maximale belasting op tafel: 50 ton Hydrostatische tafel!! Vermogen op tafel: 120 kW Torsiesterkte: 132 Kn 2 variabele snelheidsversnellingsbak: ,8 80 tpm Verticale verplaatsing van de dwarsbalk: 2100 mm Maximale werkstukhoogte: 2550 mm 2 gereedschapskoppen op dwarsbalk CNC gestuurd - horizontale beweging van gereedschapskop nr. 1: 1400 mm - verticale beweging van gereedschapskop nr. 1: 1500 mm - horizontale beweging van gereedschapskop nr. 2: 1980 mm - verticale beweging van gereedschapskop nr. 2: 1350 mm - rotatiehoek van de gereedschapskop: -/+ 30° Max turningdia -- passage: 3500 mm Power on the spindle: 120 kW Number of speeds: 1 > rpm / > 80 rpm Power needed: 195 kVa Long: 10045 mm Wide: 8120 mm Dedpfxev Rwh Ij Agdskg

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 66101, Technical Specifications: Work Area - Maximum diameter of the clamping plate: 260 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 626 mm / X-axis rapid traverse: 60 m/min - Z-axis travel: 250 mm / Z-axis rapid traverse: 30 m/min - Y-axis travel: +100/-90 mm / Y-axis rapid traverse: 30 m/min - Standard closed workpiece automation: Pick-up station from individual nests, conveyor system Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum speed: 5,500 rpm - Power (continuous duty): 38 kW - Torque (continuous duty): 300 Nm Tool Holder with Driven Tools - Tool interface: VDI40 DIN 5480 - Number of positions: 12-station disc turret, all positions driven - Maximum speed: 6,000 rpm, Torque capacity: 70–100 Nm per driven station Electrical Equipment - Operating voltage: 2x400 V, 160A GL fuse - Connected load: 90 kW Dimensions - Overall dimensions: Length = 3,390 mm, Width = 2,850 mm, Height = 2,400 mm - Weight: 16,000 kg Main Features and Capabilities: - Vertical design: Optimized for efficient chip removal and straightforward loading/unloading - Control system: Siemens 840D SL - High precision: Positioning accuracy in X, Y, and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Integrated systems for part feeding and removal - Live tooling (Sauter turret): Enables drilling and milling operations - Cooling & paper filtration unit: DGS System GMBH, 950 L Dsdpfexwk S Asx Agdjkg - Chip conveyor: DGS System GMBH - Hydraulic unit: Rexroth Q = 13 l/min, pmax = 65 bar - Mist extraction units: IFS model IFM1000 - Documentation: Available Machine Condition: NOT WORKING - Pick-up pneumatic cylinder - Turret indexing motor - Door closing pneumatic piston - Door safety switch (Euchner) - Z-axis linear scale - Siemens power supply

Condition: repair required (used), Year of construction: 2012, functionality: not functional, machine/vehicle number: 103563, Technical characteristics: Work Area: • Maximum clamping plate diameter: 260 mm • Maximum turning diameter: 260 mm • Maximum machining diameter: 220 mm • Maximum workpiece length: 110 mm • X-axis travel distance: 570 mm / X-axis rapid traverse: 60 m/min • Z-axis travel distance: 200 mm / Z-axis rapid traverse: 30 m/min • Y-axis travel distance: 40 mm / Y-axis rapid traverse: 30 m/min • Standard integrated automation (number of loading pockets by workpiece diameter: 14/(80...200 mm), 18/(30...160 mm), 30/(30...85 mm)) Main Spindle: • Spindle interface according to DIN 55026: Size 6 • Maximum spindle speed: 4,500 rpm • Spindle power (100% / 40% duty cycle): 18 / 27 kW • Spindle torque (100% / 40% duty cycle): 202 / 303 Nm Tool Turret with Live Tools: • Tool holders per DIN 69880: VDI40, 12 positions Dodpfsxvyk Ejx Agdekg • Number of tool stations: 12 • Maximum tool length (including holder): 190 mm • Maximum speed (live tooling): 6,000 rpm • Maximum torque (duty cycle: 10% / 25% / 100%): 37 / 26 / 14 Nm Electrical Equipment: • Operating voltage: 400 - 480 V • Connected load: 42 kW Dimensions: • Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm • Weight: 6,500 kg Main Features and Capabilities: • Vertical design for optimal chip disposal and easy loading/unloading • CNC control: Siemens Sinumerik 840D-sl • High precision: Positioning accuracy in X, Y, and Z axes ±0.001 mm with Heidenhain linear scales • Main spindle: High power and wide speed range • Automated loading/unloading: Parts are automatically loaded and removed via integrated automation • Live tooling: Enables drilling and milling operations in addition to turning • Chip conveyor Machine condition: NOT WORKING • Live tool drive motor removed from the machine • Main spindle defective – removed from the machine • Turret removed (coolant leaks through the turret's refrigeration circuit)

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: M250.81009, Technical characteristics: Dedpfx Asxvx T Segdokg # Main Drive: * Connected Load: 400 V/50 Hz / 43 kW * Main Spindle Drive Power (100% duty cycle / 40% duty cycle): 18 kW / 28 kW * Main Spindle Torque: 300 Nm * Spindle Speed Range: 0-4500 rpm * Spindle Nose: DIN 55026-A6 # Working Area: * Rapid traverse, X-axis: 60 m/min * Rapid traverse, Z-axis: 30 m/min * Feed force, X-axis: 10 kN * Feed force, Z-axis: 10 kN # Control System: * Siemens SINUMERIK 840Dsl * 15'' TFT monitor # Working Accuracy: * Axes (X / Z): ±0.001 mm * Spindle (C-axis): ±0.01° # Tool Carrier: * EMAG Flange Turret, Generation C361 - Capto C5 * Tool shank diameter: TN340009 * Max. tool dimensions: Workpiece-dependent * Tool change times (turret / driven tool): 0.03 min / 0.04 min * Max. speed, driven tool: 6000 rpm * Max. torque, driven tool (100% duty cycle / 10% duty cycle): 15 Nm / 3.5 kW / 40 Nm / 8.5 kW # Coolant System: * Standard delivery pressure / Max. delivery pressure: 7 bar * Pressure range for internal coolant supply: 7 bar (non-adjustable) * Coolant tank capacity: 360 liters # Part Handling: * No part catcher installed. Parts are loaded and unloaded via automation. * Ambient conditions (Room temperature / Humidity): up to approx. 30°C / max. 50% * Noise levels (Sound pressure / Sound power): 78 dB(A) # General Data: * Machine dimensions (L x W x H): 3900 mm x 1500 mm x 3200 mm * Machine weight: approx. 7,000 kg Main Features and Capabilities: # Vertical Design: Optimized for chip evacuation and convenient loading/unloading. # Control: Siemens SINUMERIK 840Dsl with integrated S7-300 PLC and 15'' TFT monitor. # High Precision: Positioning accuracy in X and Z axes of ±0.001 mm. # Main Spindle: High power and wide speed range. # Automated Loading/Unloading: Workpieces are handled automatically through integrated automation systems. # Driven Tools: Capability to use driven tools for extended machining, including drilling and milling operations. # Chip Conveyor # Equipped Chuck: EMB3 Expanding Mandrel (Autoblock) # Capto C5 Tool Holders on Turret (for external/internal machining, 2 units & 2 driven tools) # Tool Load Monitoring: Artis system capability available

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 101850, Technical characteristics: Work Area - Maximum clamping plate diameter: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse (X): 60 m/min - Z-axis travel: 200 mm / Rapid traverse (Z): 30 m/min - Y-axis travel: 40 mm / Rapid traverse (Y): 30 m/min - Standard enclosed automation (number of loading nests according to workpiece diameter: 14/(80–200 mm), 18/(30–160 mm), 30/(30–85 mm)) Main Spindle - Spindle according to DIN 55026: Size 6 Dkedpfx Aexvyh Regdjg - Maximum speed: 4,500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Tool Carrier With Live Tools - Cylindrical shank holders per DIN 69880: 12 – VDI40 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 37 Nm, 25% duty cycle: 26 Nm, 100% duty cycle: 14 Nm Electrical System - Operating voltage: 400–480 V - Connected load: 42 kW Dimensions - Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features & Capabilities: - Vertical design: Ensures optimal chip evacuation and easy part handling. - CNC control: GE Fanuc Series 18i TB. - High precision: Positioning accuracy in X, Z, and Y axes ±0.001 mm with Heidenhain linear scales. - Main spindle: Delivers high power and a wide speed range. - Automated loading/unloading: Integrated automation system for parts feed and retrieval. - Live tooling: Supports live tools for extended machining operations including drilling and milling. - Chip conveyor. Machine Condition: NOT WORKING - Live tool drive motor - X-axis optical scale - Z-axis optical scale - Z-axis belt - Z–X-axis servo drive - X, Z-axis optical scale cables - Coolant pump