Used Agie Evolution 2 for sale (141)

Condition: ready for operation (used), Agie Power output interface POI-04 -B 614.120.4 , used, small traces of use, 100% functional Ksdpfx Aoi D Tx Rsnyjlu

Condition: ready for operation (used), Agie Process regulator device PRD-08 B 629.792.3 with Agie Process regulator device PRD-09 B 629.743.6 , used, small traces of use, 100% functional Ksdpfxei D Tygs Anyelu

Condition: ready for operation (used), AGIE 622064.4 Step Motor Driver Isotorque MJG2129E , serial no. according to photo ,used, small traces of use, 100% functional, scope of delivery according to photos Kledpji D Tvgsfx Anyeu

Condition: ready for operation (used), Agie Digital motor control DMC-01 B 626074.9, used, slight signs of wear, 100% functional Ksdpfxei D Tvyo Anyelu

Condition: ready for operation (used), Agie Power module output PMO-02 B 614.030.5, used, slight signs of wear, 100% functional Kedpfxoi D Tx Aj Anyjlu

Condition: ready for operation (used), AGIE Isotorque Driver 622064.4, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Klodpsi D Twasfx Anyju

Condition: ready for operation (used), Agie MJG 2132 B 614400 B card , used, minor signs of wear, 100% functional Kodpfoi D Tw Eex Anyjlu

Condition: ready for operation (used), Agie MJG 4014 D Measuring circuit for conductivity . 619 782.6 ,used, good condition, 100% functional, scope of delivery according to photos Kedpfxei D Tw To Anyslu

Condition: ready for operation (used), Agie Low Power Supply LPS-20 A 645914.3, used, slight signs of wear, 100% functional Kodpfx Aji D Twlsnyolu

Condition: ready for operation (used), Agie MJG 2129 D Step motor driver . 622064.4, used, minor signs of wear, 100% functional, scope of delivery as per photos Ksdpfx Anji D Twzjyslu

Condition: ready for operation (used), AGIE PMO-01 A2 Power Module Output 613 930.7 , serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Kledpfx Anji D Txbeyeu

Condition: ready for operation (used), AGIE POI-01 A2 Power Output Interface 613950.5, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Klodpfxoi D Txmo Anyou

Condition: ready for operation (used), Agie VCB-01A Video controller board Nr. 629793.1 ,used, small traces of use, 100% functional, scope of delivery according to photos Klsdpfx Aei D Tyvenysu

Condition: ready for operation (used), Agie STB-06 A1 Signal Terminal Block . 621802.8 ,used, slight signs of wear, 100% functional, scope of delivery as per photos Kedpfsi D Tynex Anyolu

Condition: ready for operation (used), Agie Video controller board VCB-01 A 629.793.1 , used, small traces of use, 100% functional Kedpfx Anei D Tyyjyslu

Condition: ready for operation (used), Agie DBE-01 A3 Digital bidirectional expansion . 625854.5 ,used, minor signs of wear, 100% functional, scope of delivery as per photos Kjdpfoi D Tvnjx Anyjlu

Condition: ready for operation (used), Agie Low Power Supply LPS-20 B 617.941.0 , used, small traces of use, 100% functional Kledpfx Ansi D Twpoyou

Condition: ready for operation (used), Agie LPS/03 A2 Low Power Supply . 629 722.0 ,used, minor signs of wear, 100% functional, scope of delivery as per photos Kljdpfx Ansi D Twtsyou

Condition: ready for operation (used), Agie MJG 4014 D Measuring circuit for conductivity . 619 782.6 ,used, slight signs of wear, 100% functional, scope of delivery as per photos Kledpfx Aji D Tw Njnyeu

Condition: ready for operation (used), Agie Power module output PMO-03 B 616.021.2, used, slight signs of wear, 100% functional Klsdei D Tx Hepfx Anyeu

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Classic 2S Year of manufacture: 2004 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handbox for convenient setup AGIE IPG generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg After receiving your order, our machines are cleaned and fully overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. We would be happy to offer on-site commissioning and training. Klodpfezcaxkjx Anyou

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, AGIECUT Excellence 2F Year of manufacture: 2002 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Klsdszbbndspfx Anyou Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface roughness: 0.1 µm Ra Max. cutting rate in cylindrical cutting: 300 mm²/min Available wire diameters: 0.07 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER hand box Includes AGIE-Setup 3D After receiving your order, the machine will be cleaned, inspected, and thoroughly tested by our technicians. We would also be happy to offer commissioning and training services.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress VP2 Year of manufacture: 2011 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travel ranges: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged), 450 kg (non-submerged) Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handbox for easy setup AGIE IPG-V Generator with Power Module Kjdpfx Aoywkuyjnyolu AGIEVISION CNC control Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and thoroughly overhauled after receipt of order. A test cut with optimal surface finish is then carried out for acceptance. You will receive a 6-month warranty for the machine. We are happy to offer on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Kodpfxsv Dkvre Anyjlu Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress V2 Year of manufacture: 2007 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Kjdjx Uxglopfx Anyolu U/V-axis travel range: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axes for enhanced precision Available wire diameters: 0.20 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire break Manual front door (accessible from one side) Includes AGIEJOGGER hand-held pendant for convenient setup AGIE IPG generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled after receipt of order. Afterward, a test cut is performed with the finest surface finish for approval. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.