Used Biesse Rover 342 for sale (336)

Condition: used, machine/vehicle number: 007641, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Bedjwuz R Hjpfx Ab Ueda Max Panel Width: 1200 mm Operating Units Right Side: 8 nr Operating Units Left Side: 9 nr

Condition: excellent (used), Wide Belt Sander Biesse Levia 110 Bodeyf I Ufspfx Ab Uoda Working width: 1100 mm Working height: 3-200 mm Number of units: 2 Steel calibrating roller Combi unit with sectional pad Main motor power: 11 kW Feed speed regulated by frequency inverter Optical oscillation Sanding belt: 2150x1120 mm

Condition: excellent (used), Biesse Stream 5.5 A Edgebander Mileage: 246,000 m Top pressure belt, fluids Pre-milling cutters, Glue application, Pre-melter for PUR adhesive The glue pot is equipped with a glue drain Pneumatic pre-cut guillotine, Pressure rollers fluids Flush trim saws, Top and bottom trimming unit with straight cutters Top and bottom multi-cutter trimming unit Two corner rounding units Fluids Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Polishing unit, The machine is equipped with NC control for routers and a pneumatic package, Bdsdpfx Absxxlqvs Usa Max workpiece height 60 mm, Max edge banding thickness in roll: 3 mm, Feed rate: 12, 18 and up to 20 m/min The machine is in very good condition.

Condition: excellent (used), Year of construction: 2009, MC HSK 63 F angle unit for angled drilling below 7 degrees Bdodpfewmr Uyex Ab Uea Excellent condition See photos Location: from stock, 54634 Bitburg - available immediately -

Condition: excellent (used), Year of construction: 2009, MC Biesse HSK 63 F angle unit with 2 outputs Bdodpewmtaqefx Ab Uea Instructions Wrench Collet Location: from stock, 54634 Bitburg - available immediately -

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1000042683, feed length Y-axis: 1,300 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 63 A, total width: 1,950 mm, total length: 1,950 mm, total height: 3,100 mm, The Brema Vektor 15 is a CNC machining center with a vertical column, designed for processing wood-based panels. The machine can perform drilling, milling, and engraving using a pantograph. It allows for machining on all 4 edges of the panel and profiling thanks to its patented panel transportation system. The machine is equipped with: - A head with independent vertical spindles: 21 (7 on X + 14 on Y) - Horizontal spindles (2L + 2R on X) - Main vertical spindle (milling unit) 7.5kW - Automatic revolver-type tool change system, 10 positions Available revolver units: 1. Saw on X 2. Saw on Y 3. Drilling on Y (1R + 1L) 4. Hinge drilling (1x35mm + 2x5mm) 5. Milling 6. Milling Bsdpfx Abjx Hfh Te Ujda 7. Milling

Condition: used, Year of construction: 2007, with feed unit Bdodpfx Ajvwgizob Uea for molded parts with hot melt adhesive specification used, good condition make Artech-Biesse type Single year of manufacture 2007 machine no. 91009 CE type-tested edge thickness 0.4 - 3.0 mm workpiece height min 10 max 120 mm space requirement approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW storage location 97447 Gerolzhofen, free loading, unpacked handed over in the current condition as viewed, without guarantee and warranty

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 55595, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 60 mm, overall weight: 3,000 kg, controller model: Xp 600, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Working Area Y-axis: 1,000 mm Working Area Z-axis: 60 mm MACHINE DETAILS Bodpfx Abeydk Rmo Uoda Control: Xp 600 with Biesse Works Software Weight: 3,000 kg EQUIPMENT Automatic loading system with motorized belt conveyor 2 clamps for securing and transporting the panel 1+1 vertical electrospindle (lower + upper) with 3 axes 1+1 independent saw (lower + upper) 29 + 29 independent spindles for vertical drilling in X and Y direction (upper + lower) 10 + 10 independent spindles for horizontal drilling in X and Y direction (upper + lower) Automatic unloading system with motorized belt conveyor

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 77503, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 25 m/min, overall weight: 6,510 kg, controller manufacturer: SINTRA, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Max. feed speed: 25 m/min MACHINE DETAILS Control: Sintra Weight: 6,510 kg EQUIPMENT - Sanding unit - Coil holder magazine with 2 positions and automatic edge change via CNC - Adhesive unit for EVA hot-melt glue with preheating device and glue pot - Preparation for adhesive unit for PUR glue - Pressure group for straight profiles with electronically adjustable pressure rollers via CNC - End trimming unit with 2 motors and automatic tilt adjustment - Filler unit with 2 vertically aligned motors - Edge smoothing unit with 2 swivelling motors - Multifunctional 4-motor corner rounding unit (smoother + corner rounder) with numerical control in automatic adaptation - Anti-stick unit - Adjustable edge scraper unit Bdjdpfsydidrsx Ab Uoa - Glue-saving unit - Oscillating brush unit - Electronically adjustable working height - Motorized rubber belt with increased pressure - Motorized and electronically adjustable panel guide - Side roller conveyor with idler rollers for panel support

Condition: used, Year of construction: 2020, Used machine Bdodpfx Abex Enquj Uea Year of manufacture: 2020 Features: - Aggregate control via touch-screen - Joint milling unit - Glue pot - End trimming unit - Radius milling unit - Radius scraper unit - Flat scraper unit - Buffing unit - Spraying unit (front and rear) Location: Rhineland-Palatinate Availability: By arrangement Sale on behalf of customer. Details provided without guarantee.

Condition: excellent (used), functionality: fully functional, pre-milling aggregate granulate glue station maximum working height 60 mm guillotine for trimming edge band from the roll precision edge band trimming unit milling aggregate for trimming edge band excess from the top and bottom of the panel Bodpoydpp Iefx Ab Ujda profile scraper flat scraper polishing units machine length 420 cm year of manufacture 2012 CE mark

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Numerical control with Albatros software. Consisting of: KZ2046) Infeeder with hedgehog (buffer) store (18 positions) KZ2047) Transfer with motorised conveyoring belt Bdsdpfx Abjidmkrs Uea KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt KZ2050) CNC Mod. Vektor XK 40-13 KZ2051) Transfer with motorised conveyoring belt KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the assembly lines)

Condition: excellent (used), Through-feed Drilling ELECTRONIC LINE (3 machines), CNC controlled, J06031) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 ea) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) Bodpfx Asg Urn Eeb Ueda - No. 6 top pressing devices + No. 2 endless screws to evacuate the wastes. J06032) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 Top pressing devices + No. 2 endless screws to evacuate the wastes. J06033) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. With CNC (software Tooling System + Woodmaster) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Numerical Control Type NC 400 (Software) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Bdsdpfxjgk T Tte Ab Uoa No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 48 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Loader (Bridge Frame) "RBO" Double Station, Mod. Advantage C B) Motorized Roller table "RBO" with turning device 90° (length to crosswise) C) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 Centre A: No. 2 Electro-spindles ISO 30 (Kw 3,7 each) with tool-holder magazine with 3 places each. Centre B: No. 2 predispositions for the installation of other 2 electro-spindles No. 2 tool-holder magazines (revolver) with 56 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) Bdodpfx Absgvdkgs Uoa D) Connection transfer, with upsidedown turning machine (180°) "RBO" Mod. Ribaltatore E) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units(1 left+1 right)with 4 BH18 heads with 18 spindles(36 right + 36 left),total 72 Centre A: No. 2 Electro-spindles ISO 30 (Kw 4,5 each) with 3 tool-holder magazine each. Centre B: No. 2 predispositions to install another 2 electro-spindles No. 2 tool-holder magazines (chain) with 60 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit No.2 horizontal units(1 right+1 left)with 5 insertion nozzles each (5 left + 5 right), tot. 10 nozzles G) Stacker (Bridge Frame) "RBO" Double Station, Mod. Advantage SC

Condition: excellent (used), Electronic programmer RT 483 No. 2 Through- feed motorized conveyoring belts Feeding speed (55 m/min ca.) No. 2 Horizontal units/supports No. 1 Drilling heads for each horizontal unit/support (1 x HP 1,5) No. 20 Spindles for each horizontal drilling head Max. working width (mm) 3200 Min. working width (mm) 220 Bjdpfx Abofz Nano Usda No. 7 Bottom vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Top vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Vertical top pressure clamps No. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display Total power installed (Kw) 35,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader Bdsdpfxjd Tyvxe Ab Usa - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beams No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables Bdsdoflc T Sspfx Ab Uea OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader No. 1 Motorized rollers table (which receives panels from the Loader) Separate electric and command panel Electronic Programmer Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°). Dimensions mm 7168 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Bodpjd Rg Dzjfx Ab Ueda Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 20.8

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Bsdpfx Ajd Rg Dpjb Uoda Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels Bdjdpfx Abjcggy So Usa - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance Bdsdpscr U Ursfx Ab Uoa SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter) Bdodpfx Aod Nviqjb Uea

Condition: excellent (used), Electronic programmer NC 400 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 27.7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops Bedpfxolwqrte Ab Usda The CNC controls the movement (Z axe) of all the vertical units

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) - Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Bodpfx Abju Tg Uqo Ueda Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Guide Z-axe) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,3 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 30 (Kw 0,65 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0,3 x 2) max 25 m/min - ROTAX motors with automatic tool change (8+8 position store) Profile Scraping unit (Multi-profile, by N.C.) RB 30 Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2) With ‘hopper’ for panels (useful height mm 80), as a buffer, to speed up the work cycle