Used Felder 975 for sale (107)

Condition: excellent (used), Felder kappa 550 panel saw, format 4 Sliding table 320 cm, Ksdpfxsx Swzvs Agqjll Blade tilt and height adjustment motorized, Right-hand fence motorized adjustable up to 1600 mm, Main motor 7.35 kW, Max blade diameter 500 mm Used machine, in very good condition.

Condition: like new (used), Year of construction: 2021, Felder RL-140 clean air extraction unit with a maximum air volume flow of 2,500 m³/h. Technical specifications: - H3 dust tested - Extraction connection Ø 140 mm - Extraction possible on both right and left sides - Manual chip shaker Kljdex S I Itepfx Agqjl - 10 m² filter surface area - Max. volume flow 2,500 m³/h - Minimal space requirement 1,040 x 898 x 1,940 mm (L x W x H) - From school operation

Condition: ready for operation (used), Year of construction: 2000, Felder RL-160 clean air extraction unit with a maximum volumetric flow rate of 3200 m³/h. Technical data: - Max. volumetric flow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Manual filter cleaning - H3 dust tested - Year of manufacture: 2000 Ksdpjx S I D Usfx Agqjll - From a school operation

Condition: used, Edgebanding machine Tempora F 60.06 - Year of manufacture: 2018 - Jointing cutter, radius cutter, scraper for radii and surfaces - Cleaning and release agents - Spray device - Edge thickness: 0.4-6 mm Klsdpfxsx Ha I Uo Agqjl - Installation length: 3220 mm - Sawing/trimming unit

Condition: excellent (used), Year of construction: 2016, Clean Air Extraction Unit RL 250 Year: 2016, low operating hours 5.5 kW motor Pneumatic filter cleaning 250 mm duct connection Filter area: 50 square meters Chip container volume: 2 x 250 liters Dimensions: 2640 x 1200 x 2260 mm Weight: 785 kg Kodpsx Ruhwefx Agqjll

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Equipment and technical data: - Maximum volume flow: approx. 3,200 m³/h - Nominal volume flow: 1,750 m³/h - Negative pressure: approx. 1,120 Pa - Filter area: approx. 10 m² - Collection container: total volume approx. 400 liters - Extraction connection diameter: 160 mm - Motor power: 3.0 kW Klodpfx Ajx Enr Esgqjl - Voltage: 3 × 400 V, 50 Hz - Phases: 3N - CE marking Dimensions: approx. 1,775 × 898 × 2,005 mm Weight: approx. 320 kg Availability: short-term Location: 63934 Röllbach

Year of construction: 2021, condition: ready for operation (used), This Felder RL 300 was manufactured in 2021. It features a new extraction system, never used, with a maximum volume flow of 6000 m3/h and a nominal volume flow at 20 m/s of 5090 m3/h. The machine includes a filter area of 50 m2 and dual 250-liter chip collection containers. Sound pressure level is at 75 dB. For more information about this machine, please reach out to us. Kledpfx Aex D Ex Rsgqol Application Types Other Woodworking Machinery

Year of construction: 2021, condition: ready for operation (used), Main Drive Number of axis 4 Movement X-Axis Movement 4000 mm Z-Axis Movement 500 mm Y-Axis Movement 1670 mm This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. Kljdpfxsx D D Hms Agqjl Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2020, cutting length (max.): 5,300 mm, cutting depth: 80 mm, Technical Specification Max. Cutting Length 5300 mm Max. Cutting Depth 80 mm This Felder Format 4 Kappa V80 panel saw was manufactured in 2020. It features a powerful 5.5 kW motor, a saw blade diameter of 300 mm, and can handle cutting lengths up to 5300 mm and heights up to 2200 mm. Ideal for precise large-scale panel cutting. Contact us for more information about this machine. Application Types Ksdpfjx D D Scjx Agqell Sawing (Wood)

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Diamond cutter and glue roller newly installed. Kljdpjx D Rklsfx Agqsl This FELDER MG580 edgebander was manufactured in 2010. Ideal for precise edge banding applications, it represents a reliable choice for enhancing your woodworking operations. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. Application Types Kodpfex D D R Sjx Agqjll Edge Banding

Year of construction: 2021, condition: ready for operation (used), This Felder FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a sliding table saw with a saw blade diameter range of 250-550 mm, offering cutting heights of 202 mm at 90° and 140 mm at 45°. It supports three speeds: 3000, 4000, and 5000 rpm, and includes a cutting width of 1250 mm and length of 2800 mm. The machine also boasts e-motion control and a telescopic stop for crosscuts up to 3200 mm. Contact us for more information. Kljdpfx Aex D Exqsgqel Application Types Sawing (Wood)

Condition: ready for operation (used), Year of construction: 2021, This Felder FW 1102 P was manufactured in 2021. A used wide belt sander featuring a contact roller unit and a fine sanding with segmented electro-pneumatic sanding shoe. It includes a 7" touch color screen, digital grain compensation, and a vacuum table. The feed speed is variable from 2.5 to 18 m/min, sanding width of 1100 mm, and height range from 3 to 170 mm. Consider the opportunity to buy this Felder FW 1102 P belt sander. Contact us for more information. Kedsx D Eyhspfx Agqsll Application Types Sanding

Condition: used, Year of construction: 2011, For sale: CNC machining centre profit H20 Format-4 Felder - year 2011. The machine is in continuous operation and can currently be inspected under power! 3-axis centre with preparation for a 4th axis. Working area 1250x3150mm, Z height=100mm, possibility to work on two separate working zones. In 2024, the electrospindle was refurbished. All repairs and maintenance carried out by a qualified service provider. Loading is provided. Kjdpfxexg Ehdj Agqsll Transport is the responsibility of the buyer – flatbed truck with a bed length of 7-8m required. Requirements to connect the machine: - Electric cable 5x4mm2 with a plug compatible with workshop sockets - Electrical protection (at least) 32A industrial, matched to motor power. General rule: rated current indicated on the machine (nameplate) +40% - Pneumatic connection, internal diameter at least 12mm - Compressor with capacity of at least 100l/min - Extraction/aspiration system VAT invoice provided. Price shown is net. For any questions please contact us by phone or email.

Condition: excellent (used), Year of construction: 2018, Edgebander Manufacturer: Felder Model: G360 Year of manufacture: 2018 Operating hours: approx. 813 h Edge thickness: 0.4 - 3 mm Workpiece thickness: 10 - 45 mm Kedpfxox Niuvo Agqsll Feed speed: 8 m/min Total power: 5.5 kW Overall length: approx. 3,200 mm Pre-milling unit: Yes End trimming unit: Yes Flush trimming unit: Yes Radius scraper: Yes Surface scraper: Yes

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Kljdpsrubg Hefx Agqol

Condition: new, Year of construction: 2025, operating hours: 380 h, functionality: fully functional, machine/vehicle number: 220.02.004.25, The machine was purchased in January 2025 / delivered in April / used from April to July 2025. For sale due to redundancy following a merger with another joinery. The machine is like new. It features an infeed table with an air cushion, Edgebanding width up to 60 mm and solid edging up to 6 mm thick. Edge thickness milling unit Hot melt granule gluing station Kledox Itpzopfx Agqel Edge trimming unit: ABS 2 mm / solid 6 mm Curve trimming unit for doors Surface scraper unit and edge scraper unit Cleaning unit 3 spray stations: antistatic / anti-scratch for edges / cleaning. Full details of all tools are listed on the attached purchase invoice.

Condition: used, Year of construction: 2004, used, excellent condition Kodpfsx Ni Ehex Agqsll low operating hours from school use including slot mortising unit including transport and assembly trolley Make: Felder Model: AH751 Year of manufacture: 2004 GS certified CE type-certified GS wood dust tested Motor: 5.5 kW Planing width approx. 510 mm Planing height approx. 200 mm Table length approx. 2100 mm Bridge guard Table extension motorized brake Number of knives: 4 pcs Felder / Brück reversible knife system Feed: 6 + 12 m/min Digital display for planing height electric height adjustment with fine-tuning Integrated extraction hood Extraction connection: D 120 mm Required space: approx. 2100x1000x1100 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in its current condition as inspected without warranty or guarantee

Condition: used, Year of construction: 2009, cutting height (max.): 102 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, planing width: 310 mm, total length of planing tables: 1,500 mm, total width: 2,120 mm, total length: 2,600 mm, total height: 1,300 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 10,000 rpm, overall weight: 900 kg, chip removal: 5 mm, chip removal for surfacing (max.): 5 mm, number of planer blades: 4, spindle speed (max.): 10,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: scorer, No. 04501 5-fold combined machine Felder CF 531 Used, year of construction 2009, very good condition Circular saw tiltable - table router tiltable - surface planer / thickness planer - preparation for long hole drilling support / long hole drilling device Circular saw Motor power 3 kW Scoring unit Sliding table 2500 mm long Manual saw blade tilting 90° - 45° Saw blade diameter 250 - 315 mm Spindle diameter 30 mm Cutting height max. 102 mm Cutting width approx. 800 mm Outrigger table with telescopic cross-cut fence Pivoting cross-cut fence with degree scale Moulder Motor power 3 kW Moulder table opening diameter 180 mm Maximum cutter diameter 300 mm Ksdpfexzk Thox Agqsll Spindle diameter 30 mm Manual spindle swivel 90° - 45° Speed 3000 / 6000 / 8000 / 10000 rpm Planer Motor power 3 kW 4-knife planer shaft Planer Table length 1500 mm Planer Table width 310 mm Chip removal max. 5 mm Parallel fence pivotable 0° - 45° Thicknesser Table length 540 mm Thicknesser width 306 mm Thicknesser height 4 - 220 mm Switchable feed rate 6 m/min Preparation for long hole drilling support / long hole drilling device With travel device and handlebar Machine CE-compliant, GS-tested Technical documentation available as .pdf file Transport dimensions approx. 2600 x 2120 x 1300 mm LWH Weight approx. 900 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: ready for operation (used), functionality: fully functional, Sale of a Complete Production Line for Aluminium Frames & Insect Screens Ideal for Window Manufacturers, Trade Businesses & Producers For sale is a fully coordinated set of machines and workshop equipment for the production of: - Aluminium frames for wood-aluminium windows - Renovation aluminium frames - Insect screen tension frames This equipment is suitable both for established companies aiming to expand their manufacturing depth and for start-ups or newcomers looking to acquire a ready-to-operate production line. Special Features: - Preferably sold as a complete package - Partial sale of individual machines possible - Field-proven, functionally coordinated machinery - Independent in-house production possible - Significant cost savings compared to new purchases Training, Instruction & Know-how Transfer: On request, I offer the buyer personal training and onboarding. The goal is to share expertise accumulated over decades. Training can include: - Introduction to the complete production process - Optimal machine settings - Efficient manufacturing - Avoidance of common errors - Assistance during commissioning Buyer Benefits: - Immediate start of production - Reduction of dependency on suppliers - Expansion of product portfolio - High value creation - Know-how transfer included Reason for Sale: Kljdpfox Nbnhsx Agqel Sale is due to age and a career change. Further Information: - List of machines and details upon request - Scope of training by arrangement - Collection by appointment If interested, please get in touch. I am open to all inquiries and arrangements.

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE!! For sale: a used Felder membrane press MVP with a tiltable worktable. The machine is in like-new condition and has been serviced and inspected by our professional staff. (Fully functional) Technical data: - Worktable: 3290 x 1560 mm - HPL vacuum table with channels - 3 mm rubber membrane - Rotary vane vacuum pump - Undercarriage The membrane press is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Kledpfxjxzppbo Agqsl Related terms: press, veneer press, pneumatic press Reference: R-D1618

Condition: like new (used), Year of construction: 2022, DEMONSTRATION MACHINE!!! For sale is a used Felder thickness planer D9-51 with a thickness capacity of up to 254 mm. The machine is in like-new condition and has been refurbished and inspected by our professional technicians. (fully functional) Technical data: - Planing width: 504 mm - 4-knife cutter block (replaceable knives system) Kljdpjxzph Defx Agqjl - Electric thickness table adjustment with LED display - Planing thickness: 4–254 mm - Variable feed rate: 4–16 m/min - Max. chip removal: 8 mm - 7.5 HP (5.5 kW) motor, 400 Volt - Year of manufacture: 2022 The planer is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: planer, thicknesser, thicknessing machine, Felder Reference: R-D1618

Condition: good (used), For sale is a mortising drilling carriage suitable for Felder machines from model year 1992 onwards. The drilling carriage is in good condition and has been reconditioned and inspected by our specialist staff. (Fully functional) Technical data: - Incl. coupling and drive unit Kodpfsxzglgsx Agqsll - With ADAPTER for SERIES 6 / 7 - Drilling height adjustment range: 135 mm - Drilling length: 250 mm - Drilling depth: 155 mm The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Related terms: pedestal drill, column drilling machine, drill Reference: R-D1618

Condition: like new (used), For sale is a used Felder K700 panel saw with a cutting width of 800 mm. The machine was only briefly in use for demonstration purposes at our facility. Therefore, it can be considered as new and comes with full warranty/guarantee. Technical specifications: - Tilting circular saw 90-45° - Sliding table 1300 mm - Mitre fence 1100 mm - Cutting width 800 mm - 4 kW (5.5 HP) motor, 400 Volt - Machine no. 425.04.050.25 The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Kedpfoxzd Aiox Agqjll Related terms: saw, circular saw, panel saw, panel Reference: R-N1194

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: Kledpfx Ajxxi T Uegqel - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117