Used Scrapers for sale (712)

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Geder A Eq Ropfx Abrstu Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Gsdpfx Abjlc Ewieretu Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: new, Hebrock Model F 2 next Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special offer price and full manufacturer warranty. The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm milling depth), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm Gjdpfx Aol D Rp Eebrstu max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touch screen) Hot melt glue application to the workpiece for edgebanding material up to 3 mm jointing cutter (incl. slide - tool) up to 2 mm milling depth maintenance-free glue basin with change basin pre-equipment incl. glue discharge device HF crosscut saw station (approx. 12000 rpm) HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version) robust chain drive ball bearing mounted double roller top pressure viewing window from rear side of machine extractable workpiece support Including special equipment: F2/12 surface scraper (incl. pneum. lift) F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling) F2/27 Nesting for milling stations

Condition: excellent (used), Year of construction: 2012, Machine available : June 2024 CNC control : Heidenhain iTNC 530 Machine description Accessories available. Gedpfxsr Db I Ie Abrotu Electronic handwheel. Status March 2024: - Switch-on hours: 18648 h. - Spindle hours: 6226 h. Cooling media / chip disposal - Internal cooling lubricant supply (IKZ) - Paper belt filter 40bar / 23l / min/ tank 600l - incl. cabin roof, rotary feed-through in spindle, rotating inspection window. - Oil and emulsion mist separator - External coolant/blast air switchover via M function - Flushing gun for chip flushing - Chip conveyor Scraper belt chip conveyor - Direct measuring systems, including - Plane transformation, included Travel paths X-path 550 mm Y-path 450 mm Z-path 400 mm Rapid traverse 24 m/min. Tool holder SK 40 according to DIN 69871 Work table Swivel rotary table with simultaneous capability Clamping surface D 630 x 500 mm Swivel range -5 grd to +110 grd 360° axis of rotation Including direct measuring systems B- and C-axis and plane transformation. Main drive Speed range 20 - 18'000 rpm. Tool magazine Tool magazine 30 places SK 40 Including set-up aid for tool loading. Motor power Drive power (40% / 100% ED) 35 / 25 kW Torque (40% / 100% ED) 130 / 87 Nm Permissible table load (table center) 300 kg Positioning uncertainty B-axis Pmax=18ws (according to VDI/DGQ 3441) Positioning uncertainty C-axis Pmax=18ws (according to VDI/DGQ 3441) Installation dimensions L x W x H 3730 x 6285 x 2750 mm Weight approx. 5530 kg

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Pre-milling unit for precise workpiece preparation before the gluing section Fully automatic edge magazine for coil and strip materials GLU-JET cartridge adhesive application station + PU gluing Adhesive application via nozzle technology Gtsdjyg H Hiepfx Abreu Workpiece height: 6–60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness With pneumatic adjustment for 0–10° inclination of the end saws Milling unit for flush trimming up to 6 mm, radius milling and bevel milling up to 15° Corner rounding unit for edges up to 3 mm thickness Scraper unit for bevels and radii, equipped with 2 scraper holders Flat scraper unit for finishing Spraying device – PU Machine equipped with all processing tools Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Condition: used, Schulz roller curve conveyor left with straight section and pusher 90°-450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1600 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm including 90° chain pusher, chain spacing 450 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt curve + straight section 2. electric drive for chain scraper Side guide: included on both sides, as illustrated Scope of delivery: without supports (please enquire if 3 supports are required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: after receipt of payment approx. 3 - 5 working days Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Gtsdok Aa Iwjpfx Abrou Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2001, Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Gtedperixi Nsfx Abreu Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2026, functionality: fully functional, For sale is a new Optitek PUR High-Pressure Foaming Machine -- Model HD-Compact OPT PP 40/40 -- The compact high-pressure foaming unit from Optitek is a true space-saver. This technically advanced system, measuring 210cm x 210cm, is built on a base frame with integrated drip trays. Despite its minimal footprint, the system is designed for easy maintenance and user-friendly operation. To meet stringent quality demands, OPTITEK GmbH exclusively uses original parts from renowned global market leaders. Compliance with the highest safety standards is, of course, a given. The extensive standard equipment includes, among others: >> Ergonomic control panel featuring a high-quality 15" touchscreen from the latest generation >> Control cabinet cooling >> Comprehensive process data acquisition >> High dosing accuracy thanks to state-of-the-art pump technology >> Day tanks including material temperature control, with a 250-litre capacity >> Gear agitator on the polyol side, including an angled-blade stirrer >> Automatic filter with scraper-cleaning >> Compact mixing head hydraulic unit with integrated cooling Gtodpfx Abeyik T Ajrou We are always available for any questions you may have and look forward to your enquiry.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide Gedpfx Aedwktkjbretu - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 13,620 h, controller manufacturer: HURCO, controller model: Ultimax, spindle speed (max.): 12,000 rpm, spindle motor power: 18,000 W, number of axes: 3, This 3-axis Hurco VMX 42 was manufactured in 2007. It features a Hurco Ultimax CNC control, a spindle speed of 12,000 rpm, and an ISO40 / BIG-PLUS spindle interface. The automatic tool changer and SK40 tool holder enhance its efficiency. Additionally, it includes a scraper-type chip conveyor. Consider the opportunity to buy this Hurco VMX 42 vertical machining center. Contact us for more information. • Spindle interface: ISO40 / BIG-PLUSTool system • Automatic tool changer • Tool holder: SK40 (DIN 69871) • Pull stud: DIN standard Additional equipment Gtodeyc S N Iopfx Abrju • Scraper-type chip conveyor • Discharge height: approx. 1,000 mm Technical Specification Taper Size ISO 40

Condition: new, Year of construction: 2026, Edge thickness 0.4 - 3 mm Thickness of glued boards 12 - 45 mm Minimum length of glued boards 80 mm Minimum width of glued boards 60 mm Mechanical feed speed 8 / 11 / 13 m/min. Glue temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Pre-milling head speed, main 12,000 rpm Rounding radius R=2mm Working pressure compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Glue heating unit 1.5 kW Final milling unit 0.37 x 2 kW Gtodpfx Ajv Dt Spebrsu Main milling unit 0.75 kW x 2 Transport belt unit 1.5 kW Overall dimensions 3850 x 700 x 130 mm Weight 1000 kg Pre-milling: diamond cutter. Gluing Cutting Milling: two motors Radial scraper Flat scraper (glue) Spray system Polishing Interior lighting Automatic lubrication

Condition: new, Year of construction: 2026, Edge thickness 0.4 - 3 mm Thickness of glued boards 10 - 45 mm Minimum length of glued boards 80 mm Minimum width of glued boards 60 mm Mechanical feed speed 8 / 11 / 13 m/min. Glue temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Pre-milling head speed, main 12,000 rpm Rounding radius R=2mm Working pressure compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Glue heating unit 1.5 kW Final milling unit 0.37 x 2 kW Main milling unit 0.75 kW x 2 Corner milling unit 0.75 kW Transport belt unit 1.5 kW Overall dimensions 4500 x 700 x 1450 mm Transport dimensions 4280 x 650 x 1280 mm Weight 1230 kg Pre-milling milling: diamond milling cutter. Gluing Final cutting Milling: two motors Corner finishing Radial scraper Flat scraper (glue) Spray system Polishing Internal lighting Gtjdpfxjv Dt T Hj Abrou Automatic lubrication Electrical equipment: Delta brand

Condition: new, Year of construction: 2026, Space-saving with excellent specifications. Your entry point into edgebanding could not be better, as the 3.3m long F2 is both cost-effective and space-saving. And it also has the specifications you require to process perfect edges right from the word go – diamond-tipped cutters guarantee superbly prepared workpieces for edging. The specifications include pre-milling aggregate (up to 3 mm), the top-side fast-heating glue pot, trim saw and combicutter. The F2 can also be optionally fitted with a surface scraper. Get started into perfect edgebanding! Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Min. workpiece length: approx. 160mm Feed speed: 10 m/min. Ready to operate: approx. 3.5 min. Power consumption: ∅ approx. 5.9 kW Gsdeglfw Njpfx Abrstu Electrical connection: 400 V/3Ph/50Hz Table height: approx. 900 mm Machine dimensions: approx. 3,350 x 1,300 x 1,400 mm (LxWxH) Weight: approx. 620 kg Exhaust connection: ∅ 1x140 mm Surface scraper (incl. pneumatic disengagement)

Condition: reconditioned (used), Year of construction: 2018, operating hours: 3,317 h, overall weight: 19,000 kg, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size on agreement) Rear discharge conveyor with magnet roll Hydr. self propelled drive (for moving on site) Twin drive separate drives for scraper floor and infeed roller Radio remote control Gtedet Egddopfx Abrou

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, overall weight: 22,000 kg, power: 375.1 kW (509.99 HP), year of last overhaul: 2024, Diesel engine: 510 HP Fine shredding basket; hole-size can be agreed. Foldable discharge conveyor Overband magnet Central lubrication Twin-drive (separate drives for infeed roller and scraper floor) Hydraulically self propelled drive (for moving on site) Radio remote control Gtodperrg Ifsfx Abrou We can also offer financing if required.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Gjdsw Rz Rqspfx Abrjtu Fine shredding basket (hole size can be agreed) Rear discharge conveyor with magnet roll (magnetic head pulley) Twin drive (separate drives for scraper floor and infeed roller) Hydr. self propelled drive (for moving on site) Radio remote control

Condition: used, Year of construction: 2018, operating hours: 6,800 h, functionality: unexamined, Basic package AK560: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC Directive 50 mm EC towing eye incl. guiding shoe Tires 385/65 R22.5 Hydraulically adjustable support leg Splash protection (inner and side-mounted mudguards) Permissible total weight 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emissions standard Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Godoxx Rvkjpfx Abretu Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: "Streusel" flail tip Centrally arranged wear strips Electric pump for operating cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, releasing travel drive) when engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, gradation on request) incl. rear flap Scraper floor with 32 strips Complete radio remote control Preparation for travel drive Acoustic start-up warning Paint finish: RAL2011 deep orange Additional equipment: Special paint in DB6841 MB-Trac Green Hydraulic travel drive Fuel tank 600 l Fine shredding basket Rear conveyor 4 m, belt width 1800 mm Separate drive for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper sidewalls Impact plate with wear strip and additional tooth row Delivery date by arrangement

Condition: reconditioned (used), Year of construction: 2010, operating hours: 50,000 h, functionality: fully functional, machine/vehicle number: nicht bekannt, overall weight: 27,000 kg, number of blades: 41, rotor length: 1,800 mm, power: 400 kW (543.85 HP), rotational speed (max.): 87 rpm, blade width: 87 mm, Slow-running, robust single-shaft shredder suitable for the pre-shredding of various materials without massive contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or baled. Lindner Jupiter 1800 Drive power: 1x 200 kW (ABB) Screens: SK 80 mm Control cabinet: complete with (FU-ABB) Gtjdpeyit Rajfx Abreu Recooler: Yes, incl. Working opening: 1790 x 1750 mm Fill volume: approx. 4 m3 Rotor length: 1770 mm Rotor diameter: 745 mm Rotor speed: 50Hz: 87 rpm Number of rotor knives: 41 pcs Knife dimension, pointed knives: 87x87x38 mm Counter-knives below: 5 pcs Scraper comb above: 5 pcs Hydraulic feed: 11 kW Weight: approx. 27 t Dimensions LxWxH mm: 4800 x 3260 x 3090 mm Delivery time: immediately

Condition: used, Year of construction: 2012, cutting diameter 410 mm saw band length 5800 x 41 x 1,3 mm table height 750 mm 430 mm 410 mm 700 x 410 mm 410 mm cutting speed 500 x 410 mm down speed 320 mm dimensions of saw-band 320 x 410 mm workpiece weight 15 - 150 m/min 5,5 kW work height max. 3200 kg connected load 4500 x 2800 x 2000 mm Equipment: - Automatic cutting pressure and feed rate monitoring - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic full-stroke material clamping - Automatic movement of the clamping vices - Automatic saw frame height adjustment - Minimum speed and saw blade monitoring - Electric miter tilting via servo motor - Visualized program input with CNC control - Integrated MEBA gripper infeed system from 5-2300 mm per stroke with integrated roller conveyor roller conveyor Godpfx Asyb S Emjbrstu *Special equipment: - Laser light for cutting line display/ scribing saws - Driven chip brush - Micro dosing system - Clamping pressure regulation - Material bundle clamping - Job menu - Material database - Zero stop - Scraper belt conveyor for optimum chip removal, 2000 mm length - Cutting process control

Condition: used, tank capacity: 1,540 l, GENERAL INFORMATION Equipment: Spray head Design: vertical Remarks: Homogenizer mounted on the bottom (see photos) is included in the scope of delivery Heating/cooling: available Insulation: available Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: propeller Agitators: 2 agitators Agitator type: anchor agitator Location: external storage Cylinder temperature control: double jacketed Nameplate: Volume: 1,540 liters Double jacket volume: 100.0 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: used Previous application: pharmaceutical TANK Max. permissible operating temperature: 200 °C Support style: height-adjustable legs Number of legs: 3 pieces INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole/dome: on the upper head Gtsdpfxjycirgs Abrsu AGITATOR Agitator mounting: on the tank Agitator equipment: Scrapers are mounted on the anchor agitator (see photos) AGITATOR 2 Agitator mounting: on the tank

Condition: used, These Scrape Surface Heat Exchangers can be used on various products for heating process such as Tomato pastes, custards, margarines, oils, mayonnaise, etc. We have fully refurbished these units by changing internal gaskets, rings, sand blasting , paint job, new stainless steel frame , new controls and motor test and service . Technical Details of VOTATOR - Make: A. Johnson & Co London - Year of Refurbishment: 2025 - Quantity: 5 units - Diameter: 6 inches - Metals: Grade 316 Stainless Steel - Usage: Horizontal Votators Specifications: - Chamber Dimensions:6" Diameter Stainless Steel Chamber - Length: 6' - 1 1/2" between end plates - Rotating Centre:4 3/4" Diameter Stainless Steel - Equipped with two PTFE scraper blades - Drive:11 kW Motor Drives - Speed: 1470 rpm (through a V-belt reduction) - Reducer:Giving a shaft speed of approximately 367 RPM. Availability: - Location: In stock - Available: Immediately General Capacity Estimation Formula: For a VOTATOR, the capacity can roughly be estimated using the following formula: [ \text{Capacity} = \text{Chamber Volume} \times \text{Turnover Rate} ] Step 1: Calculate the Chamber Volume The volume of a cylindrical chamber can be calculated as: [ V = \pi \times r^2 \times h ] Where: - ( r ) = radius (half of diameter in inches), - ( h ) = height (length of the chamber in inches). Godpeygh Egofx Abrjtu Given: - Diameter = 6 inches, so radius ( r = \frac{6}{2} = 3 ) inches. - Length ( h = 6 \text{ ft} = 72 \text{ inches} ). Calculating the volume: [ V = \pi \times (3)^2 \times 72 \approx \pi \times 9 \times 72 \approx 2036.75 \text{ cubic inches} ] To convert cubic inches to liters (since 1 cubic inch = 0.0163871 liters): [ V \approx 2036.75 \times 0.0163871 \approx 33.39 \text{ liters} ] Step 2: Estimate Turnover Rate The turnover rate depends on the speed of the VOTATOR and how many times the contents of the chamber can be processed. Given the shaft speed is approximately 367 RPM, you might assume a turnover rate of about 1 turnover per minute for a basic estimate. Final Capacity Estimate Assuming 1 turnover per minute: [ \text{Capacity} \approx 33.39 \text{ liters/min} ] Conclusion The estimated capacity of each VOTATOR is approximately 33.39 liters per minute Capacity Calculation: - Estimated Capacity: 33.39 liters/minute Convert to Liters per Hour: [ \text{Capacity per hour} = 33.39 , \text{liters/min} \times 60 , \text{min/hour} ] [ \text{Capacity per hour} \approx 2003.4 , \text{liters/hour} ] Conclusion The estimated capacity of each VOTATOR is approximately 2003.4 liters per hour.

Year of construction: 2026, condition: new, Belt presses POWERPRESS 800 are designed for pressing fruit, berry and vegetable mass. Fruit mass is placed on the belt which presses it against cylinders.The obtained juice flows in the collection trays under the belt presses. Pressing is continuous. Capacity: 800 kg/h The most evolutionary feature of our belt press POWERPRESS line is integrated pump and juice collection tank into the press itself. That means that you save money and do not need an additional juice collection tank and pump which otherwise would use much space and money. There is a filtration sieve integrated into the juice collection tank. Because of that the machine filtrates the juice even during the pressing stage providing cleaner and more pure product. Entirely made of stainless steel. Has adjustable feet. Gtodpfx Ashu Ab Dsbrju The belt presses function automatically. When the tank of the mass is full, all other machines which come before belt press turn off automatically. When the juice tank is full, juice pump pumps the juice into the tanks. Includes High pressure washer. Has an integrated pump. Belt tension is adjustable. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. The cleaning of the belt is automatic with high pressure cleaner, scraper and brush. Pneumatic lifting of the security cover of the press ensures easier access when cleaning.

Condition: as good as new (ex-display), Year of construction: 2025, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options at additional cost – see below Included: + Profile rotor for increased throughput performance We are happy to arrange a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarder and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 15 pieces, reversible multiple times Optional double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Automatic stop when rotor is idle - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-boosting incremental control of the hydraulic pusher Gsdpfx Aeb Ny Eysbrjtu - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant Optional extras for the shredder (at additional cost): - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for over 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended for shredding veneer, paper or thin materials < 3 mm) - Angled conveyor belt + €8,770 net (angle adjustable 0–60°, discharge height approx. 2,000 mm) - Automatic overbelt magnet + €5,980 net Alternatively, fixed magnetic block above the belt for manual cleaning + €990 net (for low metal contamination) - Control for conveyor and overbelt magnet + €2,750 net (start/stop synchronised with shredder); alternatively, manual start/stop for conveyors + €595 net Raw material requirements: - Moisture content (dry basis) must be below 30% - Installation temperature: temperature controlled room, at least +5°C - Metals and mineral contaminants such as sand, stones, etc., will increase wear

Condition: new, Year of construction: 2026, The Holzing G-MAX 380 straight edge bander with pre-milling and corner deburring ensures a high-quality end result. Coils up to 3 mm thick and strips up to 4 mm, this inexpensive machine comes with 1.2 kg glue tank, pre-milling, automatic gluing, edge cutting, end trimming, up-down milling, radial scraper and polishing function. As standard, it is equipped with an easy-to-use control panel with a touch screen. Godjgyi Tvjpfx Abrotu Feed speed 7 m / min. Board thickness 12-45 mm Edge thickness 0.4 - 3 mm Min. Board width 90 mm Minimum plate length 170 mm Earning corners min. plate length (12-30mm) 170 mm Earning corners min. plate length (30-45mm) 220 mm Table working height 856 mm Extended support width 560 mm Dust extraction Ø4 "* 3 Engine power 6.0 kW-1 HP; 5.75 kW-3 HP Net / gross weight 500 kg / 632 kg Package dimensions: 2920x720x1320 mm Pre-milling 12,000 rpm Milling front / rear 12,000 rpm Milling up / down 10500 rpm Polishing 2800 rpm. Feed motor power 0.75 kW Pre-milling motor power 1.5 kW Spindle motor power with adhesive 0.25 kW Front / rear milling power and corner making 0.35 kW Up / down milling power 0.55 kW Polisher motor power 3KM-0.12 kW; 1KM-0.18 kW Preheating power 0.4 kW Heating power of the glue tank 1,315 kW Collecting size of the pre-milling machine 0 - 2 mm

Condition: good (used), Year of construction: 2000, GRUNWALD HITTPAC AKH-019R/! Item: GRUNWALD Hittpac AKH-019R/1 Grunwald-Cup Filling Machine various, margarine, sous, butter, cheese etc.. Grunwald Rotary cup filling machine with 2 heads, for round cups Year of production: 2000 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Gsdpfx Absp R R Dwerstu Stainless steel control panel, hanging on the machine, and operator panel. Machine has polycarbonate glass safety guards. CEE machine, incl. documentation Stationed: Denmark