Used Tempering Furnaces for sale (1,206)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,000 h, This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Additional equipment • 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer • 2x ground temperature sensor with sword probe Machine Benefits Qualitative Machine Benefits • 13x anchoring for one fixing point installation tool • Pair of worms, compact version, made of highly tempered steel and bimetal design • Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar • Recirculating oil lubrication with oil pressure and oil temperature monitoring • Barrel Ø 115-30 d with atmospheric and vacuum degassing openings • Heating and air cooling divided into 5 zones, total output of 56400 w • Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit • Complete screw temperature control including cassette installation • Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages Technical Machine Benefits • Stationary for an extrusion height of 1000 mm • Complete control cabinet with all necessary control and regulation equipment attached • Microprocessor-controlled multi-channel controller for two and three-point zones • Adaptive and self-optimizing control behavior • Fault messages with collective alarm and storage Dedpjx D Ewmjfx Ak Askw • Siemens mp377 touch panel for setpoint specification and actual value display • Recipe management of up to 20 recipes • Drive with one ac motor, vector-controlled • Digital drive controller for ac motors, with full digital technology • Motor temperature monitoring with pre-warning and shutdown Extra Information Machine still under power

Condition: used, Year of construction: 2014, functionality: unexamined, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 125 °C, number of chambers: 1, We offer two used CATALYTIC DEBURRING OVENS, 125°C, Zahner Electronic, manufactured in 2014. The ovens were purchased with the intention of using their components as spare parts. They have never been put into operation. Nothing has been disassembled. Year of manufacture: 2014 Rated frequency: 50 Hz Rated voltage: 3L, N, PE 3×400 V AC Degree of protection: IP40 Control voltage: 24 V DC Rated current: 32 A Short-circuit current Icp: 10 kA Djdpfxjzq Ax Us Ak Ajkw Peak short-circuit current Ipk: 17 kA Type testing: not type tested Touch protection: for trained personnel. The stated price is for two units. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Listing Title Complete Glass Laminating Line PUJOL LAM/PRO T TRA (50x28) with Overhead Crane, Steel Structure & EVA Dispenser (2019) Key Technical Data Dedpfxe Af E S De Ak Ajkw Category: Glass processing machinery / Glass laminating ovens Manufacturer: HORNOS INDUSTRIALES PUJOL S.A. (Barcelona, Spain) Model: LAM/PRO T TRA Manufacturing Serial Number: 19/244 (Year of manufacture: 2019) Capacity / Max Glass Size: 50x28 (approx. 5,000 x 2,800 mm) Installed Heating Power: 182 kW Maximum Operating Temperature: 160 °C Operating Voltage: 380 V (3-phase) Certification: CE certified Condition: Used, excellent / very low working hours, fully assembled and ready for inspection Scope of Delivery & System Configuration 1. Multi-Chamber Vacuum Laminating Furnace: Brand/Model: PUJOL LAM/PRO T TRA Features: Multi-level EVA vacuum laminating chambers, high thermal efficiency, independent electrical control cabinet, and exhaust cooling fans. 2. Hydraulic Scissor Lift Table:Rail-guided mobile lifting table designed for seamless loading and unloading across all furnace levels. 3. Overhead Crane & Supporting Steel Gantry Structure:Free-standing heavy-duty steel structure with runway beams and columns spanning the processing line. Overhead crane hoist for handling and positioning large glass panes. 4. PUJOL EVA Film Unwinding & Cutting Station:Dedicated freestanding foil dispenser unit equipped with pneumatic tensioning and an integrated operator control panel. 5. Auxiliary Assembly Tables:Multi-directional caster/roller conveyor tables for smooth pane alignment and transfer.

Condition: used, mileage: 87,750 km, power: 85 kW (115.57 HP), first registration: 05/2023, fuel type: diesel, overall weight: 2,199 kg, fuel: diesel, color: yellow, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 5, Equipment: ABS, air conditioning, airbag, central locking, cruise control, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill-start assist, FC5 Windshield with heat-insulating glass, H06 Air conditioning, P2W Advantage package, EY5 Mercedes-Benz emergency call system, SD1 i-Size child seat attachment, EY6 Breakdown assistance, B25 Parking brake, electric, CM0 Painted bumpers, EI0 Wireless charging system for mobile devices, FK3 Chrome-plated radiator grille, JK5 Instrument cluster with color display, V23 Interior trim, high-quality version, T68 Childproof locks on doors and windows in the passenger compartment, Z1M Approval M1, IA0 Axle configuration 4x2, LG7 LED High Performance headlights, EZ5 Parking package, XO7 Mercedes-Benz Mobilo with roadside assistance and extended warranty, EZ7 Active Parking Assist, T78 Sliding door rail cover in vehicle color, E1E Digital extra: hard drive navigation, E1D Digital radio (DAB), Y10 First-aid kit, MJ8 ECO start-stop function, VL2 Velour floor mats, E1K Navigation package, ES1 12 V socket, passenger compartment, SF6 Driver's seat, height-adjustable with lumbar support, ES2 12 V socket, trunk / cargo area, RD9 Tires without specified manufacturer, H00 Warm air duct to the passenger compartment, MS1 TEMPOMAT (cruise control), HI2 Climate zone 2 (temperate), V3P Special model, FE3 Front electric windows with comfort operation, W65 Rear liftgate, C6L Multifunction steering wheel, FE7 Electric windows in sliding doors, LA1 High beam assist, RM7 Summer tires, HZ0 Auxiliary heater, electric, D11 Roof rails with integrated base carrier, F56 Mirror in passenger sun visor, H10 Seat heating for driver and front passenger, F4W Windshield washer fluid reservoir with larger volume, E2Z MBUX multimedia system incl. navigation & DAB, XZ0 Model generation 0, G7A 7-speed automatic transmission, W70 Tinted windows in the rear, black glass, X93 Omission of type designation, V56 Trunk carpet, V55 Passenger compartment carpet, V57 Luggage compartment, We are available by phone from Monday to Friday until 8:00 PM and on Saturdays until 4:00 PM! More:!! Dsdpozl T Enjfx Ak Ajkw Leasing/financing and trade-in possible!! !! !! - Errors and prior sale excepted!! - All information without guarantee ... more on our homepage

Condition: used, mileage: 58,400 km, power: 70 kW (95.17 HP), first registration: 05/2022, fuel type: diesel, overall weight: 2,021 kg, fuel: diesel, energy efficiency: E, color: black, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, total width: 2,159 mm, total height: 1,838 mm, Equipment: ABS, air conditioning, airbag, cruise control, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill-start assist, H06 Air conditioning, SA4 Airbag for driver and front passenger, B26 Parking brake, BA3 Active brake assist, BB0 Braking system with ABS and ASR, BB3 Electronic stability program (ESP), C6L Multifunction steering wheel, CL1 Steering wheel adjustable in inclination and height, D50 Partition, E1D Digital radio (DAB), E2X MBUX multimedia system with DAB, E4S Digital extra: Smartphone integration, EC5 Pre-installation for digital extras, EW6 Digital extra: Remote Services Plus, EX5 Parking package, rear, EY5 Mercedes-Benz emergency call system, EY6 Breakdown assistance, F2U Parking assist, rear, F68 Exterior mirrors, heated and electrically adjustable, FC5 Windshield, heat-insulating, FE3 Power windows, front, with comfort operation, FG1 Armrest with storage compartment, FQ3 Glove compartment, front passenger side, closed, FR8 Rear view camera, GK6 6-speed manual transmission, H10 Seat heating for driver and front passenger, H20 Heat-insulating glass all around, HI2 Climate zone 2 (temperate), HX1 Refrigerant R-1234yf, I17 Without smartphone holder, I1F Without windshield and washer system, I2G Without windows, manual/electric, I44 16" steel wheels, I5A Payload, standard, I5D Diesel, I5N Side wall, left, IA0 Wheel formula 4x2, IF6 Panel van, IG4 Standard, IM1 Wheelbase 2,716 mm, J10 Speedometer km/h, J56 Seat belt warning system for driver and front passenger seat, JA5 Light and rain sensor, JB4 Active lane keeping assist, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JP7 Blind spot assist, JW8 ATTENTION ASSIST, KA1 Particulate filter, KL5 Fuel filter with water separator, L12 Headlights in halogen technology, L16 Fog lights, halogen, MA2 Speed limit assist, MJ8 ECO start/stop system. We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM! Further information: Leasing/financing and trade-in possible! Dedpfxs Aaz A Us Ak Aokw - Subject to errors and prior sale! - All information without guarantee ... more on our website

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Model: TB-OH 9/2 400/3/50 Year: 2016 Dods Aaaqqspfx Ak Aokw 400V, 50Hz, 9.8kW, 15A Weight: 130 kg

Condition: new, Year of construction: 2022, Tagliavini Rotor rotary furnace - brand new - year of manufacture: 2022 - for sheet metal 60 x 80 - oil or gas burner - computer control - hood with fan - 1 trolley for 18 sheets Dkodjz Tqx Hjpfx Ak Ajw - 12-month warranty - collection from the warehouse / shipping option available - price on request

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: K110175200, functionality: fully functional, For the heat treatment of small parts. Each drawer can be loaded independently. 12 months warranty, available from 12/2026. -Nominal temperature Tmax 150°C -2 ovens, each with 5 drawers, not available individually as they share a control system! -Drawers extend via telescopic slides -Drawers locked individually via quick-release mechanism -Usable space per oven: height 1200 mm x width 600 mm x depth 1000 mm -Drawer space per oven: height 240 mm x width 120 mm x depth 200 mm -Heat transfer via flowing hot air (convection) -Airflow horizontal -Air circulation via radial fan -Temperature controller Eurotherm 3508 -Thyristor switch -Safety limiter JUMO -Heating power per oven 17.4 kW -Documentation, CE declaration of conformity Inspection in our warehouse possible upon request! Dkjdpfo Aa Aivjx Ak Asw Oven, furnaces, drying oven, industrial oven, drying cabinet, heating oven, heat treatment cabinet, convection oven, drawer cabinet, drawer oven, heating oven, chamber convection oven, annealing oven, tempering oven, annealing furnace

Condition: new, mileage: 25 km, power: 150 kW (203.94 HP), fuel type: electric, color: white, gearing type: automatic, number of seats: 22, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, This is a new vehicle without registration! * 19 passenger seats + 1 driver seat * electric sliding door * heated rear windows * MBUX Dkodpfx Ake Aa Ebbo Ajw * USB ports in each row of seats * comfortable seats with 3-point seatbelts, lateral adjustment, and adjustable armrests and backrests * luggage rack on one side * sunroof made of tempered glass * carpet in the aisle * microphone for the driver & speakers in the passenger compartment * autonomous diesel auxiliary heater with 9kW. Approved for HVO fuel, 15-liter tank * air conditioning system with 5kW cooling capacity * curtains on the side windows and the sunroof * glass breakage hammers

Condition: excellent (used), functionality: fully functional, pressure: 4 bar, nominal heat output: 170 kW (231.14 HP), temperature: 120 °C, Viessmann Paromat Simplex boiler, 170 kW, can be operated with oil or gas. Dkodpfo Aavf Rox Ak Aew

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  Dodpoftm Hrjfx Ak Askw max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2019, condition: new, machine/vehicle number: BI3, Annealing furnace for stress-free annealing and forming of acrylic glass The furnace has two doors on one side and two narrow doors with a rail system on the rear side. The sheets are hung in there and pneumatically clamped and released using a foot pedal. - The furnace has a maximum temperature of 230°C and a permanent deviation of approximately +/-3°C from the set temperature at 75°C. - The internal dimensions are approximately 1600 mm wide x 2000 mm deep. In terms of height, the furnace can accommodate a 1800 mm high sheet hanging freely within the rail system. - The rail system can be seen in the attached images. The rail system can also be mounted on the front side. It can accommodate sheet thicknesses from 1.5 to 25 mm and support a sheet weight of up to 150 kg. Dkjdpfxeb Nzycj Ak Asw - The power can be adjusted in several stages. - Air circulation of approximately 3,000 m³/h - For safety reasons, the doors can also be opened from the inside. - Safety device that also shuts off the heating in the event of a fan failure.

Condition: excellent (used), Year of construction: 2019, Miwe Condo electric deck oven, 4 levels, 60x80 cm or 8x60x40 cm sheet pan size. On rollers, with exhaust hood and shelf for 4 large sheet pans or 8 small sheet pans. Connection: 2 x 16 Ah. Dksdjgh A Svjpfx Ak Aew

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) Dodpfx Aeg Ey T Eok Askw -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). Dkedpfx Akjg Ezars Ajw *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: 00069, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2016, serial number 00069, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Djdpfx Akjhgfnbs Ajkw Sales price: 1.900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 2310-028, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2013, serial number 2310-028, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Dkjdpfohgg Rrox Ak Ajw Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, temperature setting Dkodpsb A Skgefx Ak Asw -Type: SR71-8Y1-1C Price: per piece -Quantity: 7x Available -Weight: 0.3 kg

Condition: good (used), Temperature controller, temperature sensor, temperature setting -Type: Pt 100 Din Dkodpob A S Dtjfx Ak Aew -1 package, contents 10 pieces -Weight: 0.8 kg

Condition: like new (used), Year of construction: 2013, Heating water boiler, low-temperature boiler BABCOCK WANSON MODEL: HW3P Output: 1985 kW Dksdpfx Aoianacek Ajw Year of manufacture: 2013 In very good overall condition; minimal operating hours. - Price is negotiable. - Delivery is possible upon request. - All technical specifications can be seen in the images. Preferential sale to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors.

Condition: used, Sat B2599A Drawer Oven 1000T 130 °C Industrial Oven, Drying Oven If very different products or product parts with equally different processing times are to be treated independently of each other in the smallest possible space, drawer ovens are the most sensible and ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven External dimensions of the oven Width with control cabinet: 2500 mm Depth: 1700 mm Height: 2250 mm Usable volume in each drawer Width: 1200 mm Depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, in a stabilized state: +/- 3 °C at 80 °C Frame: The basic structure consists of an unalloyed steel frame, on which the outer cladding made of unalloyed steel is mounted, painted in RAL 1013 (pearl white). The oven inner casing is made of aluminized sheet steel. The insulation between the two oven casings (inner/outer casing) is ensured by 120 mm of mineral wool. Floor: As with the oven walls, with 120 mm thick thermal insulation. Height (from factory floor to the first drawer): 800 mm +/- 100 mm, adjustable via the oven feet. Openings: 3 drawers, height 250 mm, for a usable loading height of 120 mm. Maintenance doors: 2-wing maintenance door on the rear of the oven. Secured with screws. This door enables complete access to the inside of the oven. Handling of the parts: The handling of the parts is ensured via 3 drawers (stacked on top of each other). Height between each drawer: 250 mm Usable height per drawer: 170 mm, with almost 10 mm of clearance. The drawers are smooth and equipped with a closing piece on the drawer bottom to reduce heat loss when opening. Each drawer has a usable load capacity of 120 kg with load distribution over the entire area. Load peaks of up to 240 kg can be supported. Dkjdpfxjim Ik Se Ak Aow The drawer seals are made of silicone. The locking mechanisms for each drawer are secured via electromagnets and controlled by the Siemens system. Time control of the minimum preheating time with a timer per drawer (located in the control cabinet). Time control of the maximum preheating time with a timer per drawer (located in the control cabinet). A temperature display is provided for each drawer. These displays will be arranged on the front of the oven, to the left of the drawers. Ventilation: Number of circulation fans: 1 Circulation rate: 4,400 m³/h at 1450 rpm Motor power: 1.5 kW Rated voltage: 400 V Rated current: 42 A Power: 24 kW You can find more industrial ovens in other sizes - new and used - in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2007, Drying oven, drying cabinet, chamber dryer oven, preheating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet, universal oven Djdpez Tfc Tofx Ak Aokw -Manufacturer: Delair, Drying cabinet universal oven type SPX ED-400-TC -Usable space: 500/4070/525 mm -Heating power: 2000 W -Nominal temperature: 50 - 300°C -Voltage: 230 V -Dimensions: 760/720/H915 mm -Weight: 87 kg

Condition: used, mileage: 109,384 km, power: 70 kW (95.17 HP), first registration: 06/2022, fuel type: diesel, empty load weight: 1,596 kg, overall weight: 2,021 kg, axle configuration: 4x2, wheelbase: 2,713 mm, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, onboard computer, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, sliding door, soot filter, traction control, F2U Parking Package, SA8 Seat Comfort Package, Q10 Cross Member for Trailer Hitch, FR8 Reversing Camera, H10 Heated Seats for Driver and Passenger, W50 Rear Doors Double-Wing 180 Degrees Without Windows, E07 Hill Start Assist, MA2 Speed Limit Assistant, KA1 Particulate Filter, MJ8 ECO Start-Stop Function, H06 Air Conditioning, C6L Multifunction Steering Wheel, JK5 Instrument Cluster with Color Display, MS1 Cruise Control, JA5 Light and Rain Sensor, F68 Exterior Mirrors Heated and Electrically Adjustable, B26 Parking Brake, T16 Sliding Door Right, L16 Halogen Fog Lights, IM1 Wheelbase 2716 mm, J56 Seat Belt Warning for Driver and Passenger Seats, E1D Digital Radio (DAB), BB3 Electronic Stability Program (ESP), SA4 Airbags for Driver and Passenger, FQ3 Glove Compartment on Passenger Side, Lockable, BB0 Braking System with ABS and ASR, D50 Full Partition, IL5 Left-Hand Drive, IA0 Drivetrain Formula 4x2, SD1 i-Size Child Seat Attachment, H20 Heat-Insulating Glass All-Around, BA3 Active Brake Assist, JB4 Active Lane Keeping Assist, JW8 Attention Assist, EY5 Mercedes-Benz Emergency Call System, JP7 Blind Spot Assist, I44 16" Steel Wheels, R2F 40.6 cm (16") Alloy Wheels in 5-Twin-Spoke Design, GK6 6-Speed Manual Transmission, T78 Sliding Door Track Cover in Body Color, P2F Active Safety Package, V3L All-Weather Floor Mats, FG1 Armrest with Storage Compartment, P4A Equipment Level A, IC3 Model Series 420 VS11, SL2 Height-Adjustable Passenger Seat, IK7 Exterior Mirror Indicators in Halogen Technology, I5D Diesel, EW6 Digital Extra: Remote Services Plus, E4S Digital Extra: Smartphone Integration, MO6 Emission Standard Euro 6d-TEMP M/N1 GR. II, SF6 Height-Adjustable Driver Seat with Lumbar Support, FE3 Power Front Windows with Comfort Function, FC5 Heat-Insulating Front Windshield, X0I Weight Variant 2,021 kg, I40 Black Grained Grab Handle, V43 Wooden Floor, I28 LED Front Interior Lighting, LL1 Interior LED Lighting, VA2 Cargo Area Interior Trim up to Roof Height (Wood), J1F Dashboard in Black Grained Plastic, J1B Dashboard Black Plastic, XD0 Internal Code ALL6, CU9 Internal Code SSPREM, IF6 Panel Van, HI2 Climate Zone 2 (Temperate), JH3 Communication Module (LTE) for Digital Services, IK0 Complete Vehicle, KL5 Fuel Filter with Water Separator, CK1 Paint Control 1 Dksdpfxey Sr Tmj Ak Aow Note In spite of our careful control of all price markings, there may still be errors that occur. In some cases, these may result from transmission errors in the systems of various platform providers. We also cannot rule out the possibility of mistakes on our part. Therefore, please be aware that all information is without guarantee and does not constitute a legal claim. Furthermore, a price indication cannot be considered a part of the contract. If you place special value on a specific equipment feature in our listing, please bring this to our attention at the time of contract conclusion. Thank you for your understanding!

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer:Brain Child, DigitalTemperatureController Dedpfxetuycce Ak Askw -Type: BTC-9090 -Quantity: 1 controllers available -Price per piece -Dimensions: 95/50/H50 mm -Weight: 0.1 kg/piece

Condition: used, Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller Dodpfjtuycvjx Ak Aokw -Manufacturer: Hengstler, temperature controller -Type: West 6600 -Article No.: 0906 Z220000 S -Number: 6 controllers available -Price per piece -Dimensions: 120/50/H50 mm -Weight: 0.2 kg/piece