Used Tempering Furnaces for sale (1,253)

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ Iedpfx Aksfz I Rxoxjif 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Iodjfzb Rcspfx Akxjif 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 Iiedpsfz Anpofx Akxjf 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Iiedpsfzccnofx Akxjf Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. Ijdpfxsfy Txys Akxsif This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. Iisdpfx Asfzkqmskxef History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Max temperature: 1000°C Iijdpsxcb Hnefx Akxjf

Condition: good (used), Year of construction: 1991, functionality: fully functional, load capacity: 650 kg, EROS SIZE 7 furnace for carburizing, carbonitriding and quenching. Refractory exchanged with Kanhtal resistors. Useful dimensions. 700x450x1150mm Chamber dimensions: 750x560x1540 mm Outer dimensions (layout) 2500x 3715x 4500 mm Iijdpou A Tf Djfx Akxsf Furnace heating power: 85 kW Oil heating power : 35KW Furnace working temperature : 20-950ºC Cesats dimensions: 700x1150x150 mm (capacity 3 superimposed baskets) Oil tank capacity: 4500 liters Maximum load approx : 600-650 kg Control equipment UDC-5000 (potential carbon control) Carbon sensor rod (with co2 cleaning) Few hours of use

Year of construction: 2000, condition: good (used), Temptec annealing furnace: Max workpiece size: approx. 1200 × 1200 × 1200 mm Iiedox Tcmyepfx Akxof Loaded for transport.

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek finish Gas chamber furnace Type 003.05 With loading trolley Maximum temperature 200 ° C Approximate inside dimensions (B1900mm x T2950mm x H1800mm) Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! Ijdjd Spx Dopfx Akxeif International shipping costs on request!

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Iiodpfx Asxurpwekxsf Width: 520 mm Height: 115 mm Depth: 550 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Gebhardt Q2M-P2B6N-PAC RD centrifugal fan 20000 m³/h Gebhardt Q2M-P2B6N-PAC RD Centrifugal fan 20000 m³/h 7,50 kW n max: 1782 t max: 250 p: 1,200 Motor Siemens UD 0705/1082878-016-1 400/690 V 50 Hz 7,5 kW 8,6 kW 60 Hz 1160/min Dimensions. Height without motor = 64 cm Height with motor = 95 cm width = 102 cm Depth = 102 cm Iiodpfjicav Dsx Akxof Weight approx. 280 kg

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Iiedpfeim Ik Sex Akxjf Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. Financing through our bank is also possible. komplett-konzept.leasingo.de More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Condition: excellent (used), Carbolite CWF 11/5 Chamber Furnace 1100 °C Max Temp: 1100 °C With exhaust system and table Upward opening door keeps hot surface away from user Soft self-closing door (for 5, 13, 21 & 23 liter models) Iiedepygpfspfx Akxef Standard start delay and process timer function Durable aluminum oxide support plates for the heating elements; sturdy door surround and base plate High quality fiber insulation with low thermal mass Powerful heating elements on both sides provide very good temperature homogeneity Easy access to elements and controls simplify maintenance and servicing Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles new and used - you will find in our store! International shipping costs on request!

Condition: as good as new (ex-display), Vacuum drying cabinet Internal dimensions: 700 x 700 x 600 mm (depth) Heating output: 3 kW Temperature range: 1-120°C External dimensions: 1280 x 950 x 1280 mm Pressure range: Atmospheric pressure - 0 bar (not suitable for overpressure) A suitable vacuum pump will be supplied depending on the application. Power supply: 3-phase, N, PE, 400V, 50Hz, CEE plug Isdpfx Asfbl T Nskxsif The internal components can of course be completely removed!

Condition: excellent (used), Despatch LCC2-14NV-3 Year of manufacture: approx. 2018 Max. temperature: 260 °C / 500 °F Power: 415V - 1PH - 50 Hz Iodpjyvlausfx Akxjif Full Load Amps: 25.2 AMPS S.C.C.R: 5 kA Heater: 16 kW / 22.3 AMPS Largest Motor Amps: 2.1 AMPS Total Motor Amps: 3.2 AMPS

Condition: used, Gas heated double chamber furnace type: KA_GB 10.14.14/d heating: natural gas Ijdpfx Akedyvipjxoif usable dimensions per chamber width: 1.000 mm height: 1.400 mm depth: 1.400 mm max. temperature: 550°C working temperature: 250 – 550°C uniformity: ±5 K total connected load: 15 kVA hot gas circulator power: 2 x 5,5 kW (1470 min-1) combustion air blower power: 1 x 1.5 kW (5520 rpm at 95 Hz) burner output: 2 x 100 kW (expandable to max. 2 x 150 kW) number of control groups: 2

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 Isdpjmfn Rusfx Akxjif weight: 700 kg voltage: 400 V 3/N current consumption: 63 A PLC: Siemens S7 control cabinet: brand new - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Process Systems Type: LEP 2.3 System Type: Temperature Control Unit for Washing and Elution Solutions Year of Manufacture: 2020 Serial Number: 1003563 Device Number: KK6752 Design: Stainless Steel Skid, Pharmaceutical Construction LEP 2.3 KK6752 Package 7 Technical Data Design: Compact, pre-assembled temperature control unit on a welded stainless steel frame (skid system) Materials: Product-contact: Stainless Steel 1.4435 / 1.4404 Non-product contact: Stainless Steel 1.4301 Piping System: Orbital welding (pharmaceutical grade) Fully welded construction As-built isometric drawing available Pressure Data: Leak test using compressed air Test pressure: 3.37 bar Holding time: 1 hour Result: Leak-free Measurement and Control Technology: Pressure measurement (PIR, PI, PIRC) Temperature measurement (TI, TIRC) Level measurement (limit) Flow monitoring Position feedback Motor control On/Off pneumatic valves Pressure sensor measuring range: 0–10 bar Electrical Connection: Control air: 6 bar Automation-capable (PLT nodes fully documented) Main Components: 2 process pumps Plate heat exchanger Iiedjyl Ipcspfx Akxof Finned tube heat exchanger Expansion vessel Multiple hygienic control and shut-off valves Integrated instrumentation units Cooling Medium: Chilled brine (supply/return interfaces available) ───── Dimensions / Weight Construction: Compact skid unit Industrial design for cleanroom/technical areas (Transport and installation dimensions as per layout drawing) Application Area Temperature control of: Washing solutions Elution solutions Process media in biopharmaceutical environments Fields of Application: Biotechnology Plasma fractionation GMP production facilities Build / Construction Welded stainless steel frame Low-vibration pump mounting Hygienic piping Full implementation according to P&ID Clear separation between product and non-product areas Service and maintenance access tested Mechanical SAT-IQ test performed Metrological SAT-IQ test performed P&ID diagram check completed Layout drawing check completed Condition Manufactured in 2020 Industrial and pharmaceutical version New, original packaging Pressure tested Sensors calibrated FAT performed FAT / Documentation Available: FAT plan and report Deviation management Layout check P&ID check Leak test Sensor calibration Service and accessibility inspection EN10204 factory certificate Material lists (LBM) As-built isometry Component lists (equipment & PLT nodes) Special Features Pharma-GMP compliant design Complete validation documentation Full traceability Certified pressure testing Calibration certificates from accredited laboratories High-quality plant construction by BRINOX High-end biopharma standard

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, BRINOX LEP13.2 – AS Storage Tempering Unit – GMP – Year of Manufacture 2020 – Like New Manufacturer: BRINOX Process Systems LEP13.2 KK6772 Package 12 System type: LEP13.2 – AS Storage Tempering Unit Project: Ammonium sulphate system Year of manufacture: 2020 Serial number: 1003624 Tag number: MR-ASF-ASF61-KK6772 Location: Germany DESCRIPTION For sale is a nearly new LEP13.2 tempering unit in pharmaceutical GMP-compliant design, manufactured by BRINOX Process Systems. The unit is constructed as a compact, pre-assembled skid unit and was designed for use in an ammonium sulphate storage system. Complete project and FAT documentation is available. TECHNICAL DATA Type: LEP13.2 – AS Storage Tempering Unit Medium: Ammonium sulphate Design: Pharma / GMP Materials: Stainless steel 1.4435 / 1.4301 Control air pressure: 6 bar Pressure and leak testing performed FAT successfully completed MAIN COMPONENTS 2x KSB Movitec centrifugal pumps Alfa Laval plate heat exchanger Electric instantaneous water heater Reflex expansion vessel Samson control valve GEMÜ ball valves (manual & pneumatic) Labom pressure gauges Comprehensive sensors & measuring instruments Insulated pipework Stainless steel skid frame construction APPLICATIONS Temperature control of process media Use in GMP-regulated production areas Pharmaceutical and biotechnology plants Media circuits with temperature control CONSTRUCTION Compact, closed skid unit Fully piped Professionally insulated piping High-quality industrial components Service-friendly layout Completely dismountable and transportable CONDITION Condition: New, original packaging Iiodpfx Akjyl Na Nsxsf Year of manufacture: 2020 Project-specific unit Hardly any operating hours Visually and technically in excellent condition DOCUMENTATION FAT documentation Pressure test certificates P&ID diagrams Layout drawings Factory certificates according to EN10204 Materials lists EU declarations of conformity FEATURES Complete GMP documentation High-quality brand components Ideal for pharmaceutical and biotech applications Immediately available Significantly below new price

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 Iiodpfecmr D Hox Akxof burners power: 4 x 90 kW fans power: 2 x 4 kW

Condition: new, type: gas-fired with central recuperator max. temperature: 1300°C max. furnace output: approx. 700 kg/h clear door opening (w x h): 600 x 400 mm number of burners: 6 Iiodog E S Inspfx Akxof number of control areas: 3 heating capacity: 720 kW el. total connected load: approx. 15 kVA PLC: Siemens S7

Condition: new, Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm Iijdsd Sg Hhjpfx Akxjf heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7

Year of construction: 2023, condition: new, El. heated two-track plate pusher furnace, make Riedhammer type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA tolerated voltage fluctuation: 10% tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel TP1500-15 product structure (L x W x H) including push plate: 200 x 200x 101 mm Tmax debinding zone (4 segments): 650 °C Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Iodpfx Aksp T T Hnjxsif Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C min. push time: 8 min max push time: 30 min number of conveyor plates: 266 pieces channel height: 105 mm

Condition: new, TECHNICAL DATA Iedpfx Akog Dgymjxoif type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7