Used Torque Calibration for sale (3,770)

Year of construction: 2019, operating hours: 6,483 h, condition: like new (used), functionality: fully functional, Refurbished Comandulli OMEGA 100, year 2019, 6483 working hours. All bearings changed, new belt. Machine like new. Tested. Guarantee 1 year. Fsdpfx Asxudl Dshnegc

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have two units in stock - price is for one unit only !!! Overall Dimensions - inches (mm): Model NU-5500/E Height: Exterior: 39.5 Inches (1003.3mm) Width: 25.5 Inches (647.7mm) Depth: 26.5 Inches (673.1mm) Height: Interior: 25.5 Inches (647.7mm) Width: 21.5 Inches (546.1mm) Depth: 21.0 Inches (533.4mm) Shelf Capacity: Size: 19.25 Inches (489mm) x 19.25 Inches (489mm) Performance Parameters - Temperature Range: 18°C to 55°C (5°C above ambient to 3°C ambient max.) Fgedpjxbdyhefx Ahnsc - Temperature Uniformity: +0.3°C at 37°C. - Temperature Accuracy: +0.1°C. - CO2 Range: 0.1 to 20%. , CO2 Accuracy: +0.1% , CO2 Recovery: Up to 5% +0.2% in 4 minutes. - Temperature Recovery: 0.3°C/min. (Average) - Temperature Display Resolution: 0.1°C , CO2 Display Resolution: 0.1% - Door and Perimeter Heater Control Logic: Proportional 0-100% (adjustable) , Door & Perimeter Heater Duty cycles are processor controlled. , Temperature Sensor Type: Precision Integrated Circuit - CO2 Control Logic: Fixed Algorithm/Manual Environmental Adaptable. , CO2 Sensor Type: Infrared , Connectors on rear panel are provided for chart recorder, remote alarm, and printer connection.

Condition: refurbished (used), functionality: fully functional, !!!We have two units in stock, price is for one unit only!!! Thermo Scientific 3951 Reach-In CO2 Incubator - Calibrated! Specification Details Capacity 821 L (29 cu ft) Fedpfx Asxaqncehnogc Temp. Range Ambient + 5 °C to 50 °C CO₂ Range 0–20% (TC sensor) Humidity < 80% (medium) or < 90% (high) with 15 L reservoir Uniformity ± 0.3 °C at 37 °C (control ±0.1 °C) Interior Dimensions 68.5 × 78.7 × 152.4 cm Exterior Dimensions 83.8 × 96.5 × 203.2 cm Weight ~227 kg (500 lb) Electrical 200/230 V, 50/60 Hz, 10 A Certification CE, UL, cUL Good working condition. Please check out our other listings as well.

Condition: new, IDAM RI11-3P-3250x175-HD1-0-0-Prim torque motor MP 009523 ,unused, 100% functional, scope of delivery acc. photos Fgsdei D Idxspfx Ahnoc

Condition: new, ETEL TMB0291-050-3TDS-E82 torque motor SN, unused in original packaging, 100% functional, scope of delivery as per photos Fgodolki Twjpfx Ahnoc

Condition: ready for operation (used), AGIE 622064.4 Step Motor Driver Isotorque MJG2129E , serial no. according to photo ,used, small traces of use, 100% functional, scope of delivery according to photos Fjdpfsi D Tvgox Ahnegc

Condition: ready for operation (used), AGIE Isotorque Driver 622064.4, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Fodpfsi D Twaox Ahnsgc

Condition: new, Stritorque HDD 09J - Pa-Ent-At-A-C-AAM SN:006499, unused, 100% functional, scope of delivery as per photo Fgedpfjx Dwdfox Ahnsc

Condition: used, functionality: unexamined, machine/vehicle number: ETD MT41, Used Atlas Copco ETD MT41 electric torque screwdriver (Transducerized MicroTorque Driver) Manufacturer: Atlas Copco Model: ETD MT41-150-i06 In original packaging. Fsdpoynhpbefx Ahnsgc Multiple units in stock.

Condition: new, Promess KA-EMF20/150 Servo Press 20 kN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Condition: New Calibrated: Yes Strain Gauge Amplifier: BA 62601 Fodpjrgn N Sjfx Ahnogc Financing through our bank is also available. komplett-konzept.leasingo.de Find more new and used servo presses in our shop! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Fsdpfxjv Tbz De Ahnjgc Accuracy (6 sigma): +/- 4% No-load speed: 10 rpm Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Drive: 3/4" square drive Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Other tools for industrial manufacturing and maintenance on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 10 h, machine/vehicle number: 6151570380, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8603 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) No-load speed: 20 rpm Min/Max torque range: 50 to 240 ft.lbs Working torque: 65 to 190 ft.lbs Fgsdpfxov Tbh Ro Ahnjc Drive: 3/4" square drive Length: 11.06 in. Weight with battery & reaction arm: 9.0 lbs

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Fgodov Tbpzepfx Ahnsc Accuracy (6 sigma): +/- 4% No-load speed: 10 rpm Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Drive: 3/4" square drive Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Other tools for industrial manufacturing and maintenance on request.

Condition: used, mileage: 118,919 km, power: 346 kW (470.43 HP), first registration: 09/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2025, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab: GM (wide, long, medium-high) * Color: Fire red RAL 3000 (acrylic) * Electrically operated glass sunroof * Sun visor in front of the windshield * Central locking with remote control * Door extensions on driver and passenger sides * Driver comfort seat: air-suspended, with lumbar support and shoulder adjustment, seat heating, armrests * Passenger seat: not suspended, adjustable lengthwise and recline * Lower bunk with slatted frame and 70 mm mattress * Storage compartments and shelves in the cab * Pull-out fridge and storage box in the central area * Air conditioning: Climatronic * Auxiliary water heater, 4 kW * Multifunction steering wheel, adjustable * Tachograph: digital, remote communication, calibrated * 2 power sockets (12 V and 24 V) and 2 USB ports in the sleeping area * Interior styling: color scheme Moon Grey * Additional acoustic cab insulation ----Infotainment MAN Mediasystem Advanced Navigation 7-Inch * Navigation maps for Europe and Russia * BLUETOOTH / DAB+ / TRAFFIC * Online traffic for navigation function * MAN Advanced sound system with subwoofer Fgjdowxk Naepfx Ahnjc * 2 cameras, one connected to reverse * Multifunction steering wheel * Connectivity board module * Smartphone integration * Integration of MAN apps in the vehicle ----Lighting and Signal Tones Front headlights: H7 * Daytime running lights: LED * Fog lights: H7 * Cornering lights: H7 * Indicator lights: side, LED * 2 clearance lights: LED * Air horns on cab roof * Horn: dual tone, electric * Rotating beacons: halogen, yellow, with function monitoring * Work lights: halogen, white, on rear, lower, center of cab * Switch for work lights * Cargo area lighting ----Assistance Systems Lane Departure Warning (LDW) * Attention Assist (MAN AttentionGuard) * Adaptive Cruise Control ACC Stop and Go * Emergency Brake Assist (EBA) * Hill Start Assist ----Brakes and Safety Electronic Braking System (EBS) * Anti-lock Braking System (ABS) * Full brake assist * High-performance engine brake MAN EVBec, multi-stage * Retarder Eco, speed-dependent, multi-stage, energy efficient * Disc brakes on front, rear, and trailing axles * Roll-off guard MAN EasyStart * Brake pad wear indicator with warning ----Engine, Transmission & Power Take-offs Engine: MAN D2676 LF79, 346 kW (470 HP), 2,400 Nm torque, Euro 6d * Transmission: MAN TipMatic 12.26 DD, with Retarder 35 * Transmission features: MAN EfficientRoll / MAN Idle Speed Driving / rocking/creep mode * MAN TipMatic Efficiency driving program up to 70,000 kg / TipMatic Manoeuvre, shunting mode * Gearbox-dependent PTO, type NH/4c, without flange, f=0.97, position approx. 3:30 * Electronic/electrical shift lockout when PTO engaged * Gearbox-dependent PTO for short-term operation

Condition: used, mileage: 557,515 km, power: 368 kW (500.34 HP), first registration: 05/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2024, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, MAN TGX 18.500 4x2 LLS-U Perm. GVW: 18,000 kg Wheelbase: 3,600 mm Cab: XXL high-roof cab ---- Engine & Drivetrain * MAN D2676LF51 * 500 hp (368 kW) * 2,500 Nm torque * EURO 6 SCR * Common rail injection * OBD-C * Viscous fan * Long engine and gearbox mounts * Electronic engine management (EDC) * Flamestart system ---- Transmission & Driving Features * MAN TipMatic® 14-speed * TipMatic Profi (for on-road use) * Retarder * MAN EasyStart * Cruise control * Adaptive cruise control (ACC) * EVBec engine brake * Differential lock * Axle ratio i = 2.53 * Speed limiter 90 km/h ---- Axles, Suspension & Brakes * Front axle: Air suspension, 7.5 t * Rear axle: Air suspension, 11.5 t * ECAS air suspension system * Electronic braking system MAN BrakeMatic * Disc brakes front & rear * ABS / ASR / ESP * Emergency brake signal ESS * Rear axle stabilizer * Front underride guard * Lowered ride height ---- Wheels & Tires * ALCOA Dura Bright EVO alloy wheels * FA: 355/50 R22.5 * RA: 295/60 R22.5 ---- Safety & Assistance Systems * Emergency Brake Assist 2 (EBA2) * Lane Guard System IV * MAN AttentionGuard * Emergency brake assistant * Immobilizer * Driver airbag * Seat belt warning indicator * Operating data recording * Rear view camera pre-installation ---- Cab & Comfort (XXL) * XXL high-roof, 2,440 mm wide * Air-suspended cab mounting * Comfort seats for driver and co-driver: - Air suspension - Seat heating - Lumbar support - Shoulder adjustment - Alcantara/leather upholstery * Multifunction leather steering wheel * Leather interior trim * Alpine insulation (NORDIC) * 2 bunks with comfort mattresses * Refrigerator under bunk * Eberspächer D4S auxiliary heater Fsdovht Hbjpfx Ahnegc * Automatic climate control * Electric sliding/swing roof * Electric sunblinds * Ambient lighting * Central locking with remote control ---- Multimedia & Navigation * MAN Media Truck Advanced * 7" color display * Europe navigation * Bluetooth handsfree (2 phones) * USB / AUX / SD video * MAN Sound System * Connectivity board (RIO Box) * Fleet management preparation (FMS) * Digital tachograph CONTI (calibrated) ---- Exterior & Body * Aero-Pack XXL: - Roof spoiler - Side skirts - Adjustable side flaps * LED daytime running lights * Cornering lights * Fog lights * Work lights * Chrome bumper inserts * SAF Holland SK-S 36.20 fifth wheel coupling * Working platform * Air connections * Aluminum tanks: - 2 × 480 l diesel - 80 l AdBlue * Lockable tank caps * TÜV: 11.2024 * Safety inspection: 05.2025 ---- Internal vehicle number: 10156 ---- Subject to errors and prior sale. WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp.

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, CNC control HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE 15" TFT color flat screen with softkeys RAM: 4 GB Hard disk: 32 GB, of which at least 21 GB program memory Input resolution / display increment linear axes: up to 0.1 µm Input resolution / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with tilted machining plane Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enable buttons / dead man's buttons according to CE Travel ranges X-axis / longitudinal axis: 4,000 mm Y-axis / transverse axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / connection / pneumatics Max. feed rate interpolating axes: 40 m/min Installed power: 60 kVA Max. power consumption: 150 A Air requirement pneumatics: 400 Nl/min Working pressure pneumatics: 6 bar Machine table / floor plate Machine table recessed, with leveling units Table size: 2,500 x 4,000 mm Fgsdpfjyrndmsx Ahnoc Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling head / universal milling head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining up to 10° possible Integrated cooling of the torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. speed A/C axes: 30 rpm Working torque A/C axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning accuracy A/C axes: 8 arcsec Positioning repeatability A/C axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping for electric spindle Software / calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measuring 3D shapes, tools, molds and dies Measurement program creation directly via coordinate points / surface points Vibration / collision monitoring Sensor for detecting vibrations Detection of collisions and excessive vibrations on 3 axes Reaction time approx. 1 ms Electronic interface for functional testing Tool changer Tool changer with arm for tool changes Overlapped-wheel design Full enclosure for operator safety Tool positions: 80 Max. tool diameter: 75 mm Max. tool diameter with free adjacent positions: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 Fjdpfezb Evlox Ahnogc MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable • User and maintenance manual and CE declaration of conformity

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 100 h, Demo unit for sale, not used in production. APEX3R (83 x 168 Inch or 2108 x 4267mm) APEX3R includes Phenolic Table Top, Work Area (2108 x 4267mm), Single Piece All Welded Tube Frame, Stress Relieved and Milled axis Datums, All axis Servo Drive system, X&Y axis Planetary Gear box, Helical Racks & Pinions on X & Y Axis, Z axis Ball Screw, Repeatability +/-0.025mm, Max Slew Rate 70m/min Phenolic Vacuum Grided Table Top, Pop Up Pin Ready; Right Front Pins 3-306-R16; Right Front Pins Locator Pins; Front Right Location 4 Zone High Pressure Manual Ball Valve Vacuum Table Plumbing Units in Millimeters Controller Display Main Electrical Enclosure Kit; Apex3R 380V 3P CE MACHINE VOLTAGE 380V/415V 3PHASE CE Standard Grid Vacuum table 30mm block grid using 6mm gasket tape Fgodpfoy Hpkxex Ahnoc CE Safety Machine Configuration 300 Standard WidthGantry; 6 inch clearance ATC Spindle: 10 HP (7.S kW) HSD HSK63 (ER40/ 240O0 rpm) 380V 3PH CE Fan Cooled Spindle: Max Shaft Size 1 inch (25-26mm) Pneumatic Controlled Dust Boot Linear Spindle Tool Changer System - Single Row 11 Position HSK63 Tool Holder Kit HSK63 QTY 3 - Includes metric collets in various sizes Techniks HSK63 Stand & ER40 Torque wrench Kit Spindle Only Z Carriage; No Knife Kit Surface Probe and Auto Calibration Sensor Apex3R Operator Hands Free material surfacing setup Auto Misting / Lubricating System for ATC spindles Design Designed for ATC spindle machines. Includes both rigid copper and flexiable Loc Line nozzles. Maglube Misting Fluid (1 gallon) Seed based lubricant that works well for Non Ferrious material cutting. Evaporates quickly after initial wipe off. Single Zone Safety Light Curtain Kit Individual Mirror Beam Bender Stanchion Cross Hair Laser Pointer Allows operator to easily set 0,0 location on material to start job using visual red crosshairs Operations Roller Workstation with All in One 24" PC Includes Keypad Stand, Maintenance Override Switch & CE Safety Reset Butto

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. - 460 l fuel tank, left side - 80 l AdBlue tank, right side - 2-cylinder air compressor, 720 cc, with fuel-saving system - Heated air dryer - Electronic Braking System (EBS) - Anti-lock Braking System (ABS) - Full brake assistant Retarder Eco, speed-dependent, multi-stage, energy-efficient - Disc brakes on front axle - Disc brakes on rear axle - Rear lights, LED - Emergency braking signal, automatic hazard warning activation - Reversing warning system, acoustic, deactivatable, volume adjustable, hazard light function - Light function test - Side marker lights, LED - Diesel engine MAN D2676 LFBI, 397 kW (540 hp), 2,650 Nm torque, Euro 6e - MAN TipMatic 12.28 OD, with retarder 35 - Transmission function MAN Idle Speed Driving Fsdpfjy Aufysx Ahnogc - Drive programs MAN TipMatic Performance and Efficiency, up to 70,000 kg - Extension for MAN TipMatic Heavy Haulage drive program - MAN TipMatic Manoeuvre driving program, shunting mode - Single-disc clutch, 430 mm, dry, reinforced (LongLife) - Front axle tires Continental 385/55R22.5 Conti EfficientPro HS5 Steer Long Distance TL - Leading axle tires Continental 385/55R22.5 Conti EfficientPro HS5 Steer Long Distance TL - Rear axle tires Continental 315/70R22.5 Conti EfficientPro HD5 Drive Long Distance TL - Tire pressure monitoring system (TPMS), with tire temperature display, trailer tire pressure display - Standard steering ratio - Front axle: 9,200 kg, non-driven, dropped, steered, non-liftable - Leading axle: 8,200 kg, non-driven, straight, steered, liftable - Rear axle HY-1360: 13,000 kg, HY-axle without through drive, straight, non-steered, non-liftable - Digital axle load indicator (ALM) for air-suspended axles - Digital axle load indicator (ALM) for trailer/semi-trailer - Parabolic spring at front axle, 2-leaf, steel - Air suspension on leading axle; air suspension on rear axle - GX cab: maximum size (wide, long, extra high) - LED package Plus, front headlights, fog lights, cornering lights - Front headlights, LED - Daytime running lights, LED - Fog lights, LED - Cornering lights, LED - Side indicator lights, LED - Headlight cleaning system - Manual headlight leveling - High beam assistant; automatic driving light control, with light sensor - 2 LED contour lights - Comfort blink function, activatable - 2 air horns on cab roof - 2 LED rotating beacons, yellow with function monitoring (individual LEDs light up in cascade, all around) on cab roof, 1 right and 1 left - 2 working lights on cab roof, 1 right and 1 left - Working lights, LED, white - Switch for working lights - Mirror package: external mirrors electrically adjustable, heated, front mirror, curb mirror right - External mirrors, electrically adjustable with maneuvering aid, heated - Curb mirror, right, electrically adjustable, heated - Front mirror, manually adjustable - Driver’s seat package Premium, air-suspended, with seat heating and seat ventilation - Driver’s comfort seat, air-suspended, with lumbar support and shoulder adjustment - Seat ventilation, driver’s seat - Passenger seat package Basic, non-suspended, length, backrest, height adjustable - Multifunction steering wheel, leather, height and tilt adjustable - Digital tachograph, with remote communication (according to DSRC), CONTINENTAL - Digital tachograph/speedometer, calibrated (Equipme

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,215 h, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 20,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5 axis MTcut UDS80H-5A was manufactured in 2019. It features a 20,000 rpm spindle, 120 Nm torque, and 35 kW drive power. Equipped with a HSK63 tool holder, 96-position tool changer, and a Kessler rotary tilting table with an 800 mm diameter. Includes Heidenhain TNC 640 control, 15" TFT screen, and Ethernet connectivity. Ideal for precision machining with its Heidenhain glass scales and BLUM laser tool measurement. Contact us for more information about this machine. • Operating hours: Control unit 6,904 h; Machine 5,480 h; Program runtime 2,215 h • Spindle: 120 Nm torque, separate spindle cooling for constant temperature • Tool interface: HSK63 with blow-out function • Rotary table: 800 mm diameter; Kessler rotary tilting table with 2 A-axes and 1 C-axis, direct-drive torque motors • Feedback: Heidenhain glass scales in all 5 axes • Tool changer: 96 positions with double-arm gripper • Control: 15" color TFT screen • Connectivity: Ethernet interface, 2x USB ports • Control functions: Plain text programming; short block processing time; create new program while another is running; proven Heidenhain machining cycles • Electronic handwheel • CE certified Additional equipment • Chip conveyor • Coolant system • Internal high-pressure coolant 50 bar with belt filter system • Coolant and compressed air gun • BLUM laser tool measurement • Heidenhain TS460 workpiece probe system for HSK63 with radio and infrared transmission • Heidenhain KinematicsOpt including Heidenhain calibration sphere KKH 250 • Extraction system: Filtermist FX4002, air volume 1,250 m³/h • Rotating viewing window • Work area light • Tool package Fsdpfxex D In Us Ahnjgc Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Fjdpfx Ahoyx Dwkonjgc Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, High-end 5-axis flipping machine for aluminum structural components available at short notice. 90–95% completed, available for on-site demonstration under power. Delivery approx. 3 months. For sale is a state-of-the-art horizontal 5-axis flipping machine (HM2040AL-AC), specifically designed for machining large-format, thin-walled aluminum structural components in the aerospace sector. The machine is approximately 90–95% completed, installed at the factory, and can be inspected under real machining conditions. 👉 This machine platform has already been installed more than 80 times. Fgedpfx Asy H Ncbohnjc Highlights - Available at short notice (delivery time approx. 3 months) - High-end configuration (Fischer / Siemens / Heidenhain) - Full 5-axis machining in a single setup - Integrated flipping system (90° rotation) - Ideal for aerospace aluminum structures - Very attractive price-performance ratio - Includes 2 pallets sized 2000 x 4000 mm, setup station, and rotary table Technical Data - Travel: 4300 / 2200 / 650 mm - Table size: 4000 × 2000 mm - Max. load: 4000 kg - Rapid traverse: 50 m/min - Feed rate: 30 m/min - Positioning accuracy: up to 0.008 mm - Repeatability: up to 0.004 mm Spindle - Fischer (Switzerland) - 30,000 rpm - 125 kW - 66 Nm - HSK-A63 - ICS 70 bar Features - 5-axis torque motor swiveling head (zero-backlash) - Siemens SINUMERIK 840D sl - 60-position tool magazine - Closed-loop measuring system (Heidenhain) - Automatic flipping system - High-pressure cooling - Chip conveyor & central lubrication Options - Renishaw laser tool measurement - Workpiece probe - Ultrasonic thickness measurement (≤10 µm) - Vacuum clamping system - Spindle thermal compensation - R-TEST calibration system Including setup station and pallets! German service, spare parts warehouse, etc.

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min Fedpoxhg Dijfx Ahnogc - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,150 mm, travel distance Y-axis: 1,850 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, spindle speed (max.): 24,000 rpm, torque: 87 Nm, Fidia C20 CNC WORKING AREA X-axis longitudinal travel: mm 3,150 Y-axis transverse travel: mm 1,850 Z-axis vertical travel: mm 1,000 MAX AXIS SPEEDS Fodpfeyw Tddsx Ahnegc X, Y axis feed rate: m/min 30 Z axis feed rate: m/min 24 WORK TABLE Clamping surface: mm 3,000 x 1,600 Maximum permissible load: kg/m² 5,000 T-slots: • Longitudinal 8 H12 + 1 H8 • Width mm 22 • Pitch mm 160 ELECTROSPINDLE Maximum power (S6 60%): kW 55 Spindle speed range: rpm 240 ÷ 24,000 Constant power range: rpm 6,000 ÷ 24,000 Maximum torque: Nm 87.5 Tool holder: HSK-A63 C-axis travel: ± 200° C-axis speed: °/min 2,000 C-axis offset from spindle axis: mm 75 A-axis travel: +95° / -110° A-axis speed: °/min 2,000 Max distance spindle nose – table surface: mm 1,175 Machine equipped with: • 24-position tool magazine • Remote electronic handwheel • HMS system for head calibration • Various equipment included with the machine • User and maintenance manual and CE declaration of conformity

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, table length: 4,500 mm, table width: 2,500 mm, spindle speed (max.): 22,000 rpm, CNC Heidenhain iTNC 640 WORKING AREA: Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE: Dimensions: mm 4.500 x 2.500 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE: Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. C-axis rotation range: ± 270° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power range: rpm 3.000 to 18.000 Constant torque range: rpm 10 to 3.000 Tool interface: HSK-A63 DIN 69893 ELECTROSPINDLE HSK-A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 15.000 Constant power range: rpm 2.500 to 12.000 Constant torque range: rpm 10 to 2.500 Tool interface: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted fixed chain magazine located at the rear of the machine, fully enclosed for operator protection, equipped with a vertical tool change arm and automatic tool pre-selection. Fixed-pocket management system. Hydraulic axis locking Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 450 Max tool weight: kg 20 Fsdoyv In Ispfx Ahnogc REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure water and air through the spindle • Semi-automatic electrospindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity