Used Torque Calibration for sale (3,784)

Condition: used, functionality: fully functional, mileage: 214,374 km, power: 368 kW (500.34 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Gearbox: I-shift Automated 12-speed - GCW 60 tonne Engine type: NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries : 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro standard: Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCooling : Without Parking heater (Webasto): 1.8kW Air to air Fridge: 33 litre under bunk mounted fridge / freezer with dividers Air conditioning: Electrically controlled air conditioning with sun sensor Driver attention support: Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Gsdpoztnd Uefx Af Aeka Fifth wheel height: 150mm leg-height Front axle load: 7.1 tonne Adaptive cruise control: NO I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Full air cab: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Advanced Emergency Brake System Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 65 litre under cab Additional roof lights: without Volvo Extended Front cab: PART OF AERO CAB Technology Display, media display: Infotainment System Telematics connection gateway: GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Headlights Automatic - LED headlights Roof lights: without Side Skirts: Without Deflectors: Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Basic finish - Satin badges, Grey grille, instep, bumper & spoiler, mirror housing and sun visor Tyres Information Front left - 5 mm Front right - 14 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 307,505 km, power: 368 kW (500.34 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,177 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Globetrotter XL Single energy battery system (2 batteries) NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR I-shift Automated 12-speed - GCW 60 tonne Standard transmission shift - I-Shift or Powertronic Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor Comfort 4: suspended - belt in seat Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21R22.5 Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive axle ratio: 2.31:1 Gsdpeztnbmjfx Af Ajka 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK 65 litre under/behind cab Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Technology Secondary colour information display. Fleet Management System gateway - required for telematics and Dynafleet dealer fit. Exterior LED headlamps V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 241,496 km, power: 368 kW (500.34 HP), first registration: 05/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,809 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Battery 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI SCR, EGR and particulate filter Rear view camera: Without Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with sun sensor Driver attention support: NO Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver-side Godpfoztm I Sex Af Aeka Technical specifications Wheelbase: 3800 mm Fifth wheel height: 160mm leg-height Front axle load: 7.5 tonne Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Full air cab: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with AEBS advanced emergency brake system Fuel tanks capacity (left, right): 450L fuel tank - right hand side, 650 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 90 litre for 710mm diameter fuel tanks Additional roof lights: Without Tyres Front tyre 385/65R22.5, Drive axle tyre 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: NO Headlights: Halogen H7 Roof lights: without Side Skirts: Without Deflectors: Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Basic finish - Satin badges, Grey grille, instep, bumper & spoiler, mirror housing and sun visor Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, Year of construction: 2011, length 300 mm centre height ca. 30 mm diameter 0,5 - 52 mm weight of the machine ca. 0,103 t dimensions of the machine ca. H 0,84 x L 1,00 x P 0,435 m Serviced and calibrated by Studenroth on 24.07.2024 Length and diameter measuring device: Equipment/accessories: -Software -monitor and computer -Technical documentation Godpfewmwwajx Af Aska

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm Gsdjwdta Eepfx Af Aoka tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: ready for operation (used), Year of construction: 1999, operating hours: 58,132 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, spindle motor power: 21,000 W, total height: 1,700 mm, total width: 1,700 mm, overall weight: 5,700 kg, controller manufacturer: HEIDENHAIN, controller model: CNC PILOT, product length (max.): 3,565 mm, workpiece diameter (max.): 470 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 1999. This Gildemeister CTX400 Serie2 features a maximum turning diameter of 420 mm and a distance between centers of 600 mm. It includes a disc turret with 12 tool stations and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX400 Serie2 machine we have for sale. Contact us for further details. • Control Unit Brand: HEIDENHAIN • Control Unit Model: CNC PILOT • Distance Between Centers: 600 mm • Swing Over Bed: 570 mm • Swing Over Cross Slide: 470 mm • Maximum Turning Diameter: 420 mm • Spindle Nose: DIN 55026 Flat Flange Size 170h5 • Front Bearing Diameter: 120 mm • Spindle Bore: 79 mm • Maximum Chuck Diameter: 250 mm • Maximum Torque: 320 Nm • Turret Type: Disc Turret • Tool System: VDI 20/20 • Tailstock Taper: MK4 • Tailstock Quill Diameter: 80 mm • Tailstock Quill Travel: 550 mm • Feed Drive X-Axis: 3.3 kW • Feed Drive Z-Axis: 3.3 kW • Lubrication Pump Power: 0.1 kW • Coolant Pump Power: 1.4 kW • Hydraulic Pump Power: 1.5 kW • Rapid Traverse X-Axis: 24000 mm/min • Rapid Traverse Z-Axis: 20000 mm/min • Feed Rate: 0.025–7000 mm/min Gkodpfx Aszufq Iof Aoa • Thread Pitch Range: 0.025–3500 mm/min • Coolant Tank Capacity: 100 L • Power Supply: 400 V • Frequency: 50 Hz • Connected Load: 44 kVA • Rated Current: 64 A • Control Voltage: 24 V • Operating Hours: 58,132 h • CE Certified • Scope of delivery as shown, including 3 internal clamping heads • Configuration as shown: VDI30 disc turret Optional: • Tailstock • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2007, CNC Lathe SPINNER TC 65 2007 ----- Dimensions / Weight Dimensions L × W × H (without chip conveyor): 2.73 × 1.44 × 1.62 m Footprint: 3.93 m² Total weight: 4,200 kg Swing diameter over bed: 425 mm Distance between centers: approx. 600 mm Max. turning diameter: 310 mm Axes Max. travel X-axis: 230 mm Max. travel Z-axis: 740 mm Max. rapid traverse X-axis: 15 m/min Max. rapid traverse Z-axis: 24 m/min Main Spindle Speed (bore 32 mm): 4,500 rpm Spindle head Ø: 100 mm Max. Ø collet chuck: 250 mm Max. permissible collet jaw weight: 1.25 kg Spindle bearing diameter: 120 mm Capacity of clamping cylinder: 65 mm Tailstock Arbor diameter: 80 mm / MK4 Arbor stroke: 120 mm Adjustable travel of tailstock: 475 mm Max. clamping force (at 30 bar): 500 daN Turret Manufacturer: Sauter Type: 0.5.473.516 Gkjdpozudxdefx Af Aja Type with tool drive: 0.5.480.516 Coupling system: DIN 5482 with gear B15×12 Number of stations: 12 Tool holder: DIN 69880 / 30 mm Driven stations (only TC65-MC): 6 Speed of rotating tools (only TC65-MC): 6,000 rpm Torques Main spindle Fanuc (S6 40 %): 178 Nm Main spindle Siemens (S6 40 %): 301 Nm Driven tool TC65-MC, Fanuc (S6 40 %): 7 Nm Driven tool TC65-MC, Siemens (S6 40 %): 9.5 Nm

Condition: used, Year of construction: 2002, turning diameter 0455 mm turning length 2000 mm control CNC Pilot Heidenhain swing diameter max. over bed cover 670 mm swing diameter above cross guideway 455 mm travel -x axis 320 mm travel -z axis 2080 mm spindle head 220 h5 spindle bore 107 mm turning speed range - spindle 4 - 2.800 U/min max. Torque 2.000 Nm drive capacity - spindle motor 30 kW turret (x-stations) 12 tool taper VDI 50 Gedpfx Afjzgw Tfe Aska diameter of quill 120 mm pressure max. 14 KN quill stroke 120 mm tailstock taper MT 5 total power requirement 58 kVA weight of the machine ca. 10 t dimensions of the machine ca. 6,7 x 2,4 x 2,3 m CNC - Lathe GILDEMEISTER - CTX 600 E Serie 2 With 3 jaw chuck and self centering steady.

Condition: used, Year of construction: 2009, faceplate diameter 1250 mm turning height 1250 mm Control 0i-TD Fanuc max. torque at faceplate 12500 Nm max. turning diameter 1600 mm max. workpiece weight 5000 kg table speed 2- 300 min/-1 x-axis 1475 mm z-axis 900 mm rapid traverse 10 m/min Gjdpfx Afozhxi Ro Aeka spindle cone ISO BT50 tool capacity 12 pos. total power requirement 75 kW weight of the machine ca. 32 t dimensions of the machine ca. 4,7 x 5,8 x 5,5 m CNC vertical lathe with 12 positions ATC. Spindle reception is BT 50. Control: Fanuc 0i-TD

Condition: used, Year of construction: 1970, faceplate diameter 2000 mm Gkodeydqpcepfx Af Aea turning dia. in gap 2400 mm length of gap 200- 630 mm travel -x axis 1700 mm travel -z axis 400 (+550) mm faceplate turning speed range -stepless- 5- 180 U/min centre height over plate 1140 mm diameter of main spindle 285 mm spindle bore 90 mm Control S 840 D max. workpiece weight 5000 kg max. torque on the faceplate 3000 Nm total power requirement 57 kW weight of the machine ca. 20 t dimensions of the machine ca. 5,5 x 3 x 2,8 m Machine was reconditioned and modernized in 2015 with Siemens 840 D CNC control. Originaly it was built in 1980.

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 12,000 rpm, total height: 3,295 mm, total width: 3,200 mm, overall weight: 12,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, product length (max.): 3,537 mm, tool weight: 8,000 g, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DOOSAN VC 630/5Ax was manufactured in 2013. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a maximum workpiece weight capacity of 500 kg and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5Ax universal machining centre we have for sale. Contact us for further details. • CNC controls available: FANUC 31i-5, HEIDENHAIN iTNC 530, SIEMENS 840Dsl • Travels: A (tilt) +30° to -120°; C (rotation) 360° • Spindle nose to table: Standard 160–680 mm; with APC 210–730 mm • Spindle center to column guideway: 220 mm • Rapid traverse: X/Y/Z 40/40/36 m/min; A/C 20/30 rpm • Cutting feed: X/Y/Z 18,000 mm/min; A/C 7,200 deg/min • Table: Ø630 mm (standard); APC pallet 500 x 500 mm • Max workpiece: 500 kg; dimensions standard Ø730 x 500 mm; with APC Ø730 x 450 mm Gkedpfx Afjzt Rwqs Aja • Min table indexing: 0.001° • Spindle: Built-in; 12,000 rpm (optional 20,000 rpm); ISO #40 7/24 BIG-PLUS (optional HSK-A63) • Max spindle torque: 204 N·m • Spindle motor power: FANUC 22/18.5 kW; HEIDENHAIN 23.5/18 kW; SIEMENS 30/24 kW • ATC: MAS403 BT40 (options CAT40/DIN40); 40 tools (options 60/81/101/121); max tool Ø adj 80 mm, without adj 125 mm; max tool length 300 mm; fixed address; tool-to-tool 1.0 s; chip-to-chip 8.5 s

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30 h, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: SIEMENS, controller model: 840D SL, total height: 2,515 mm, total width: 1,700 mm, table width: 410 mm, table length: 770 mm, table load: 200 kg, overall weight: 3,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 16,000 W, number of slots in tool magazine: 24, product length (max.): 2,390 mm, number of axes: 3, This 3-axis SPINNER VC450 was manufactured in 2014. It features an X-axis travel of 450 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a robust table size of 770 x 410 mm and a maximum table load of 200 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER VC450 vertical machining center we have for sale. Contact us for further details. • Control Unit Brand: Siemens • Control Unit Model: Siemens 840D SL • Spindle Power: 16 kW • Maximum Torque: 60 Nm • Rapid Traverse: 36 m/min • Tool Magazine Capacity: 24 Positions • Maximum Tool Diameter: 80 mm • Maximum Tool Length: 200 mm • High-Pressure Through-Spindle Coolant (CTS) • External Coolant Tank • Fully Enclosed Working Area • T-Slot Worktable • 3-Color Signal Tower • Machine Status: Tested and Fully Functional • Main Spindle Replaced by SPINNER in February 2026 • Operating Hours Since Spindle Replacement: approx. 30 h Additional Equipment • Chip Conveyor • Machine Vises (optional) • SK40 Tool Holders (optional) Godpfx Afszt Nvle Aoka • Additional Tooling and Accessories (optional) Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 400 mm, number of axes: 3, This 3-axis Mitutoyo Crysta-Plus M574 was manufactured in 2010. It features a measuring range of 500 × 700 × 400 mm and includes a Renishaw MH20i probe head with a TP20 standard force probe system. The machine is equipped with a granite measuring table and multiple styli for enhanced versatility. If you are looking to get high-quality coordinate measuring capabilities, consider the Mitutoyo Crysta-Plus M574 CMM machine we have for sale. Contact us for further details. Technical Data • Measuring Range (X × Y × Z): 500 × 700 × 400 mm • Probe Head: Renishaw MH20i • Probe System: TP20 Standard Force • Probe Module: Standard Force • Scale Resolution: 0.0001 mm (0.1 µm) • Probe Ball Diameter: Ø 4 mm • Stylus Length: 20 mm • Operating Temperature: +5 °C to +40 °C • Length Measuring Error (E0, MPE): (5 + 6L/1000) µm • Single Stylus Form Error (PForm, MPE): 6 µm • Test Sphere Diameter: Ø 3.994 mm Gkodpfx Afezt Nq Ne Asa • Automatic Temperature Compensation: No • Calibration Date: 10 March 2026 Additional Equipment • Renishaw MH20i indexing probe head • TP20 probe system • Stylus rack • Multiple styli • Granite measuring table • Machine stand

Year of construction: 2000, condition: like new (used), stock-No.1919 Godjb Aq Hpopfx Af Aska complete set of extrusion-tools / calibrating parts , used but very good condition- very less operting hours, tools made in Germany ᐳ for the production of electric cable protection canals/ ducts, incl. punching unit to punch the fixing holes in the ready-made profiles

Condition: used, Year of construction: 2002, turning diameter max. 480 mm turning length max. 2.000 mm control Sinumerik 840 D Siemens swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 2.800 min/-1 transmission ratio 2 power capacity - main spindel 53 kW max. Torque 3.456 Nm spindle nose 11 DIN 55026 chuck diameter 315 mm spindle bore 103 mm usable bar diameter 82 mm x-travel 405 mm z-travel 2.049 mm diameter of quill 100 mm quill stroke 100 mm tension force 14 kN capture 30 DIN 2079 rapid traverse 10 m/min Working speed 0,1 - 10.000 mm/min feed power 15 kN Gkedpfx Afovy Ig To Aoa number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,4 x 3,8 x 3,0 m CNC-Lathe VDF BOEHRINGER - VDF 315 Cm / DL 2000

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 Gedpfx Afjy E I Hie Aeka • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2009, Seiger SLZ 1000 cycle lathe year of construction 2009 center distance 3000mm Gjdpfxsu T Dryo Af Aoka Circulation over bed 1010 Circulation over facing slide 650 Drive at 100% ED 37KW at 60/ ED 52KW max. torque approx. 9000NM Speed 5-900rpm X Feed force max 240000N Z feed force max 16000N Control Heidenhain Manual Turn with faceplate and steady rest The offer is aimed exclusively at traders within the meaning of §14 BGB

Condition: ready for operation (used), Year of construction: 2023, overall weight: 1,540 kg, load capacity: 245 kg, arm reach: 3,000 mm, number of axes: 6, This 6-axis ABB IRB 6700-245/3.00 was manufactured in 2023. It features a payload capacity of 245 kg and a reach of 3.00 m, making it suitable for various applications. The robot arm is equipped with advanced software extensions, including collision detection and multitasking capabilities. If you are looking to get high-quality automation capabilities, consider the ABB IRB 6700-245/3.00 robot arm we have for sale. Contact us for further details. Gksdpeztrtmofx Af Asa - Protection Rating: Standard- Calibration Method: Axis Calibration- Controller Variant: Single Cabinet Controller IRC5- Supply Voltage: 400V- Power Connection: Plug HAN HSB 6p+E- Main Switch: Rotary switch- Cabinet Ambient Temperature: Up to max. 45°C- Manipulator Cable Length: 7 m- FlexPendant Cable Length: 10 m- FlexPendant Option: Removable (Jumper plug included)- Software / RobotWare: RobotWare 6- Software Extensions: World Zones, Path Recovery, Collision Detection, PC Interface, FlexPendant Interface, Multitasking, MultiFunction- Safety Options: SafeMove Pro, PROFIsafe F-Device, Safety Module- Fieldbus / Network: ProfiNet I/O Master/Slave, Ethernet connection on connector panel, Ethernet M12 on base plate- DressPack Configuration: For Material Handling (Base to Axis 3)- Operating Mode Selector: Keyless Selector 3 modes- Service Socket: 230V- Included Accessories: Cable reel 10 m

Condition: excellent (used), functionality: fully functional, Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 1000 kg load capacity PRODUCT TYPE S10 TYPE CODE S10.1-1HH 1000kg / 2000 Kg LOAD CAPACITY (KG) 1000 / 2000 Kg LIFT (MM) 1000 ARM LENGTH (MM) 1500 / 2000 Gkedpfxjzubw Rs Af Aja Torque CLAMPING PLATE (NM) 1400 BENDING MOMENT ARM (NM) 3000 FREQUENCY CONVERTER yes LIFT DRIVE hydraulic SELF-WEIGHT (KG) 1700 All machines come with documentation and operating instructions.

Condition: good (used), weight of the machine ca. 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Counterholder tip diameter: 50 mm Gksdpfxszidz Us Af Aja Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 550 mm Table diameter: 260 mm Base circle diameter: 0–630 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 300 kg X-axis: 230 mm Y-axis: 370 mm Z-axis: 500 mm Max. workpiece diameter: 630 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Condition: good (used), Year of construction: 1992, weight 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 800 mm Table diameter: 500 mm Base circle diameter: 0–1000 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 2000 kg X-axis: 230 mm Y-axis: 530 mm Z-axis: 750 mm Max. workpiece diameter: 1000 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: Gksdpfozidz Iox Af Asa - Machine calibrated according to DAKKS on November 19, 2017

Condition: ready for operation (used), Year of construction: 2012, spindle motor power: 7,500 W, spindle speed (max.): 5,000 rpm, overall weight: 2,500 kg, total height: 1,580 mm, controller manufacturer: FANUC, controller model: na, number of axes: 6, This 6-axis ERGOMAT TBC-42 Swiss Turning Machine was manufactured in 2012. It features a maximum material diameter of 42 mm and a spindle speed up to 5000 rpm. Equipped with a Fanuc 18i-TB Dual Path control, it offers precision and versatility with 8 tool positions and rapid feed rates up to 30 m/min. If you are looking to get high-quality turning capabilities consider the ERGOMAT TBC-42 machine we have for sale.Contact us for more information. Machine Benefits Technical Machine Benefits • Main spindle power (intermittent): 11. 0 kw • Main spindle torque (continuous): 95. 5 nm • Rapid feed cross slide x1/z1: 15/15 m/min • Rapid feed turret slide x2/z2: 15/30 m/min • Rapid feed vertical slide v1/v2: 15/15 m/min • Thrust on all axes: 2500 n Extra Information Turret Tool positions: 8 Tool section: 16 x 16 mm Tool holder diameter: 25 mm Standard tool holder: VDI 25 Switching time station to station: 0.3 sec Switching time additional station: 0.06 sec Gjdpfex D Sccex Af Aoka Switching time 180°: 0.48 sec Tools Live tool positions: 8 Live tool holder shaft diameter: 25 mm Live tool power (continuous): 1.1 kW Live tool power (intermittent): 3.7 kW Live tool torque: 7 Nm Live tool maximum speed: 6000 rpm Dimensions Machine Depth 2630 mm

Condition: good (used), Year of construction: 2010, 2010 Hermle C50 U MT Dynamic 5 Axis Vertical Machining Centre With Turning Capability & Dual Siemens 840D Controls Table Dimension Ø1,000mm (16 16mm H7 'T' Slots). Maximum Table Load 2,000kg (1,000kg Turning). Maximum Component Dimension Ø1,000 x 810mm High. Axis Travel 'X'=1,000mm, 'Y'=1,100mm, 'Z'=750mm , 'A'=+100°/-130°, 'C'=360°. Rapid Traverse 'X'60m/min, 'Y'=60m/min, 'Z'=65m/min. Maximum Spindle Speed 12,000rpm (56kW Motor). Maximum Turning Spindle Speed 500rpm. Spindle Taper HSK A100. 84 Position ATC (Additional ZM 42 Magazine). Maximum Tool Ø250mm, Maximum Tool Length 430mm, Maximum Tool Weight 30kg. Chip To Chip Tool Change Time 7s. S/No. 19871 (2010). Machine Hours 89,860.9 , Drive Hours = 74,916.2, Spindle Hours 10,585.7, Work Spindle Hours 566.0 (New Spindle Installed 2023). With Knoll KF 400 Through Coolant Paper Filtration System, Knoll S-1 Chip Conveyor, Swarf Bin, Handte Mist Extraction Unit, Hyfra Pedia VWK70-DE-S Chiller Unit, Brand New Blum Laser Toolsetter, Quantity Of Tooling In ATC, Renishaw MP40-2 Spindle Probe, Visiport TK2 Spin Window, Blum Reference Tool In Carry Case, Heidenhain Calibration Kit In Carry Case, Automatic Doors, Retractable roof For Loading & Technical Manuals. Weight 21,500kg. Technical Agreement/Specifications Are Located In A Folder Inside Control Panel. Machine Is A Clean & Very Good Condition, Only Issues Are Internal Lights Not Working (No Faults As They Were Repaired Last Month Through Kingsbury). We Run Fusion 360 Through The Machine. Gkodpfszt Nywex Af Aoa

Condition: used, functionality: fully functional, mileage: 352,967 km, power: 353 kW (479.95 HP), first registration: 08/2023, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Gksdpszrwd Usfx Af Aea Large cab capacity with mid-height roof GX. Battery, 12 V, 230 Ah, 2 units, maintenance free. Three-phase alternator 28 V, 120 A, 3,360 W, LIN. Diesel engine MAN D2676 LFAY, 353 kW (480 hp) output, 2,450 Nm torque. Euro 6e. Gearbox MAN TipMatic 12.26 DD. MAN EfficientRoll gearbox function. Advanced Emergency Brake Assist (EBA). Adaptive cruise control - ACC Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Comfort co-driver’s seat, air-sprun. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Multi-function steering wheel, adjustable height and angle. Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2" fifth-wheel coupling. Main wheelbase, 3900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Maximum speed limiter, 89 km/h, tolerance +1 km/h, electronic, engine speed regulation. Technology MMT infotainment system, Advanced Mid. MAN TeleMatics. Exterior Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Cornering light, LED. Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed. Tyres Information Front left - 14 mm Front right - 14 mm Rear left inner - 8 mm Rear left outer - 8 mm Rear right inner - 8 mm Rear right outer - 8 mm

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 3,800 kg, lifting height: 4,800 mm, fuel type: diesel, mast type: triplex, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Condition: New machine Technical condition: New Front tires type: Non-marking Rear tires type: Non-marking Gjdpfx Afoxvfwwj Aoka Description: In addition to this unit, we offer a wide range of forklifts and warehouse technology equipment. All our machines are workshop-inspected and FEM 4.004 certified. Please contact us by email or phone. Further information and our full range can be found at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Leasing and financing options at attractive rates are available upon request. We are happy to provide you with professional and comprehensive advice regarding our vehicles. Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, heater, load guard, soot filter, full cabin, full free lift, safety light, non-marking tires, interior mirror, rotating beacon, windshield wiper, single pedal, LED, seat.