Used Torque Calibration for sale (3,755)

Condition: new, New Siemens SIMOTICS S synchronous servomotor for highly dynamic drive applications in machine tools and automation systems. The data below is based exclusively on verifiable data from the 1FT7086 series, using the key data you specified. Manufacturer: Siemens Series: SIMOTICS S Type: AC servomotor Model: 1FT7086-5AF71-1MG Motor type: Permanent magnet synchronous motor Rated speed: 3000 rpm Stall torque M0 (100 K): 28 Nm Rated power: 5.65 kW Cooling: Self-cooled Design: IM B5 Protection class: IP65 Shaft height: 80 mm Gsdpfx Aezcgurokyeuc

Condition: used, Year of construction: 2016, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 880 mm, 5-Axis Machining Center This machine was used as a showroom machine from 2016 to 2022. From 2022, the machine was used for production at HAL Plauen for the processing of axle carriers. Before being used for production, the machine was completely overhauled/refurbished. Godpezc Ekrofx Akyjuc In December 2024, a new milling spindle was purchased (the spindle has approximately 500 operating hours). Machine operating hours: 24,000 Working area: -> X-axis 1500 mm -> Y-axis 1250 mm -> Z-axis 880 mm Feed rate / Rapid traverse: -> X-axis 100 m/min -> Y-, Z-axis 100 m/min Axis acceleration: -> X-, Y-axis 7 m/s² -> Z-axis 10 m/s² -> Jerk 150 m/s³ Table load capacity: -> Max. weight 400 kg Spindle: -> Tool holder HSK 100 -> Speed range 10,000 rpm -> Power (S6/40% duty) 40 kW -> Max. torque 175 Nm Tool magazine: -> Positions 36 -> Max. tool length 520 mm -> Max. tool diameter (with free adjacent slot) 205 mm -> Max. tool weight 20 kg -> Total load 200 kg -> Tool change time 3 s with chip conveyor and chiller/cooling unit • Manufacturer: Lahntechnik GmbH • Model: KESY 280-01 • Serial number: 2017-05981 • Year of manufacture: 2017 • Power rating: 13.6 kW • Nominal voltage: 400 V / 3~ / PE / 50 Hz • Control voltage: 24 V DC • Protection class: IP 54 • Refrigerant: R410A – 10.03 t CO₂ equivalent • Max. operating pressure: 30 bar (HD) / 19 bar (ND) • Empty weight: 400 kg • Country of origin: Germany The machine/asset does not include any product-related tools/fixtures or grippers (robots). The machine was taken out of production in October 2025 due to the factory closure. It is still powered on and can be inspected in that state. However, it cannot be put into operation for a trial run because no machine operator is available. Please review the videos available, which were taken of the machine in December 2025. Transport locks are not required. For loading and unloading, special Wenzler lifting/transport equipment is required. This equipment must be rented directly from Wenzler/Heller Group by the buyer. After lifting and unloading, the buyer must return the equipment to Wenzler.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 5,379 h, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,010 mm, spindle motor power: 30,000 W, overall weight: 6,600 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of slots in tool magazine: 12, swivel angle C-axis (max.): 360 °, number of axes: 4, This 4-axis Okuma LB3000II-MYC 950 was manufactured in 2020. It features a maximum turning diameter of 340 mm and a maximum turning length of 950 mm. The machine is equipped with a robust main spindle power of 30 kW and a maximum spindle speed of 4,200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000II-MYC 950 horizontal turning machine we have for sale. Contact us for further details. • Max Turning Diameter: 340 mm • Max Turning Length: 950 mm • Swing Over Cross Slide: 470 mm • Main Spindle Torque: 700 Nm • Spindle Speed Range: 42 - 4,200 rpm • Spindle Bore: 91 mm • Spindle Nose: A2-8 (KK Size 8) • Front Bearing Diameter: 140 mm Gujdpfxjzcf Ane Akyec • Turret Stations: 12 • Driven Tool Power: 7.1 kW • Driven Tool Torque: 23.7 Nm • Driven Tool Speed: 4,500 rpm • Driven Tool Speed Range: 45 - 4,500 rpm • Rapid Traverse X: 25 m/min • Rapid Traverse Z: 30 m/min • Rapid Traverse Y: 12.5 m/min • Rapid Traverse C: 200 rpm • Tailstock: NC Tailstock • Tailstock Force: 5 kN • Tailstock Taper: MT5 • Chuck: SMW KNCS-N 275-86 A8 • Chuck Diameter: 275 mm • Chuck Through Hole: 86 mm • Draw Tube Bore: 82 mm • Maximum Chuck Speed: 4,700 rpm • Collet Chuck: Hainbuch Spanntop mini Axzug 65 K8 • Collet Capacity: 4 - 65 mm • Collet Chuck Diameter: 204 mm • Collet Chuck Length: 155 mm • Maximum Collet Chuck Speed: 6,000 rpm • Coolant System: Knoll KF 110/700 • Through-Spindle Coolant (TSC): Yes • High Pressure Coolant: 70 bar • Coolant Tank Capacity: 700 l • Filter Capacity: 110 l/min • Power Supply: 400 V • Phases: 3 • Frequency: 50 Hz • Maximum Connected Load: 38 kVA • Total Current Consumption: 54.9 A • Maximum Motor Current: 219 A • CE Marked: Yes • Driven Tools: Yes • Sub Spindle: No • Chip Conveyor optional, not included: Interlit ISF • Chip Discharge: Right Side • Chip Conveyor Discharge Height: 1,200 mm • Spindle Hours: 5,379 h • Power-On Hours: 20,878 hSpecial equipment or accessories are not included Technical Specification Through-spindle Coolant Yes Counter Spindle No Driven Tools Yes

Year of construction: 2009, condition: ready for operation (used), overall weight: 900 kg, number of axes: 2, Optical measurement machine manufactured in 2009. This Zoller Venturion 600/8 features a maximum tool length of 800 mm and a maximum tool diameter of 440 mm. It is equipped with a tool holder for SK50 and SK40. With a maintenance contract in place and annual calibration performed, this machine is in good condition. If you are looking to get high-quality optical measurement capabilities, consider the Zoller Venturion 600/8 machine we have for sale. Contact us for further details. • Condition: Good • Maintenance: Annual calibration performed • Maintenance contract: Yes • Operating shifts: 2 • Tool holder: SK50 and SK40 • Max tool length: 800 mm Gsdpey A Nxhsfx Akyjuc • Max tool diameter: 440 mm • Venturion 600/8 Pilot 3.0 CNC • CNC-Based Joystick Control • Max Tool Length Z = 800 Mm • Max Tool Diameter D = 440 Mm • Measuring Diameter D = 200 Mm • Power Supply 230 V • High Precision Spindle A.C.E. (I) • Runout Accuracy 0.002 Mm • Universal Tool Clamping For Steep Taper/ANSI/CAT/MAS-BT/HSK/Capto/KM • Autofocus System For Venturion 600 • Rotary Encoder For Venturion 600 • Presetter For Shrinking Devices (SK 50) • Presetter For Shrinking Devices (SK 40) • ZOLLER Insert D 78/VSH Size 1 • IPC Electronics 2-Axis Pilot 3.0 CNC Version • Operating System Windows XP • Control Unit Cockpit Pilot 3.0 With 17" TFT Color Display Touchscreen Keyboard Mouse Storage For Labels And • Laser PrinterStandard Functions Pilot 3.0 • Tool Management Standard • Data Output DNC With 3 Selectable Output Formats Included • Output Format Siemens 840D • Output Format Heidenhain TNC (TNC 407/410/415/415B/426/430/530/124) • Automatic Read/Write Station With Height Adjustment • NC1 Read/Write System Software • Automatic Positioning WZI Autofocus And Edge Detection Required • NC1 Drawing System Standard Data Interface • Manual Venturion/Pilot 3.0 • Electrical Connection 230 V 50/60 Hz • Pneumatic Connection 6 Bar • Complies With DIN EN 61010 Safety Standards

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: TNC640 (19" Touch-Screen display), table width: 650 mm, table length: 1,600 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 30, tool weight: 7,000 g, number of axes: 3, This 3-axis HARTFORD LG 1570 TNC 640 was manufactured in 2023. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 700 mm, and Z-axis travel of 650 mm. The machine includes a robust clamping table with dimensions of 1,600 x 650 mm and a maximum table load capacity of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the HARTFORD LG 1570 TNC 640 vertical machining centre. Contact us for further details. Gjdpfjzccgqjx Akyouc - T-Slots configuration: 5 slots, 125 mm distance, 18 mm size- Guideway System: Upgraded Linear Roller Guideways on X, Y, and Z axes (instead of standard ball guides)- Feed Drives: Digital servo motors with ball screws on all axes- Main Spindle Taper: SK40- Main Spindle Drive: Pulley/Belt driven AC motor- Max. Spindle Torque (M max): 89 Nm- Spindle Temperature Control: Closed cooling circuit with separate spindle cooling unit- Tool Changer Type: Automatic Tool Changer (ATC) with rapid-change double arm- Tool Magazine Capacity: 30 positions (ATC30)- Max. Tool Diameter: Ø75 mm (Ø150 mm if adjacent positions are empty)- Max. Tool Length: 300 mm- Workpiece Probe: 3D Touch Probe (installed for automatic zero-point and position measurement)- Tool Probe: Tool Touch Probe System (installed on table for length, diameter, and tool breakage detection)- Internal Coolant Supply (IKZ): High-pressure pump system, max. 20 bar with cartridge filter- External Coolant Supply (AKZ): Multi-nozzle system on spindle nose- Air Supply: Spindle nose compressed air cooling nozzle & central air through the spindle (programmable via M-functions)- Chip Management: Enclosed workspace with sloped bed, chip flushing system, and longitudinal hinged belt chip conveyor (discharge height approx. 1,200 mm, discharge side: Left)- Enclosure features: Front electronically monitored sliding door, side swing doors with windows for long workpieces- Lubrication: Fully automatic central lubrication system with level control and CNC warnings- Workspace Lighting: 2x LED lights- Additional Equipment: Control cabinet air conditioning unit, electronic handheld handwheel, compressed air gun with coiled hose, hand-operated coolant flushing gun- Color Scheme: Black (base frame, column, vertical slide, coolant tank, cabinet, doors, conveyor) & White (enclosure housing)

Condition: like new (used), Year of construction: 2024, On behalf of the customer, price: €14,000 Technical data: - Engine - Mitsubishi - Power: 18.5 hp - Cylinders: 3 - Bore / Stroke: 70/78 mm - Displacement: 900 cc - Rated speed: 2700 rpm - Max. torque: 55 Nm at 1600 rpm - 7-pin socket - Hydraulics - Automatic depth control: Yes - Lifting position control: Yes - 3-point linkage, Category 1 Gjdpfszb Agujx Akyjuc - 1 double-acting control valve at the rear - Lifting capacity at the lifting points: 590 kg - Brakes: Disc brakes, dry - Parking brake - Transmission: 6 forward + 2 reverse gears - Transmission: Mechanical, sliding mesh - Speeds - Min. driving speed: 1.24 km/h at 2700 rpm - Max. driving speed: 18.5 km/h at 2700 rpm - PTO: 540, 900 rpm, Mechanical - Steering system: Power steering - Dimensions and weights - Total weight: 625 kg TÜV (German Technical Inspection) - valid until 05/2027 - The vehicle is two years old. The Fieldtrac has been used very little and therefore has very low operating hours. The vehicle is in very good condition, both technically and visually. The first service has already been carried out, so nothing stands in the way of immediate use. The offer includes a rear-mounted forklift including accessories, including: Grapple shovel - Soil tiller 95 cm, used only once!! Original wheel set with AS tires Thanks to the various tire options, the vehicle can be used flexibly. The Fieldtrac impresses with its robust design, high maneuverability and versatile applications. Ideal for farmyards, agriculture, horse keeping. Highlights at a glance: - Little used / few operating hours - First service already carried out - Rear-mounted forklift with accessories - Very well-maintained condition Location: at the customer's location - immediately available - Sold on behalf of the customer

Condition: used, functionality: fully functional, mileage: 189,329 km, power: 368 kW (500.34 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Gjdpfxezdc Anj Akyeuc Gearbox: I-shift Automated 12-speed - GCW 60 tonne Engine type: NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries : 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro standard: Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with sun sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.1 tonne Retarder: Yes Adaptive cruise control: NO I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 65 litre under cab Additional roof lights: without Tyres: 315/70R22.5 Technology Display, media display: Infotainment System Telematics connection gateway: GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Headlights Automatic - LED headlights Roof lights: without Roof air deflector Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 5,000 rpm, travel distance X-axis: 360 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,580 mm, spindle motor power: 29,500 W, total height: 2,115 mm, total width: 1,980 mm, overall weight: 8,500 kg, product length (max.): 5,750 mm, number of axes: 3, This 3-axis SPINNER TC800L 110 was manufactured in 2023. The machine is fully functional and includes a steady rest, tailstock, chip conveyor, and oil mist extraction system. It operates on a 3-phase power supply at 400 V. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800L 110 horizontal turning machine we have for sale. Contact us for further details. • Status/condition • Machine powered on and still in operation • Fully functional; steady rest requires sensor bang-up replacement • Configuration and capacities • Turret without AgW (adjustable power supply) • Turret type: axial/radial • Number of tool stations: 12x VDI50 (option: 16x VDI40 or 12x BMT65) • Tool holder type: VDI50 (option: VDI40/BMT65) • Number of driven tools: 12 (option) • Driven tool speed: 4000 rpm • Driven tool power (S1/S3): 2.2 / 5.5 kW • Driven tool torque (S1/S3): 17.5 / 43 Nm (axial), 14 / 35 Nm (radial) • Maximum turning diameter: 500 mm • Maximum swing diameter: 800 mm • Turning length: 800 mm / 1580 mm (L version) • Distance between centers: 800 mm / 1580 mm • Maximum workpiece weight: 800 kg • Axes • Rapid traverse X/Z: 15 / 24 m/min • Spindles • Number of spindles: 2 • Main spindle • Nose: A11 • Bar capacity: 110 mm • Torque (100% / 40%): 175 / 235 Nm • Torque gear stage 2: 700 / 939 Nm • Sub spindle (option) • Nose: A6 • Bar capacity: 52 mm • Chuck size: 210 mm • Power (S1/S6): 15 / 19 kW • Torque (S1/S6): 95 / 121 Nm • Tailstock (if equipped) • Pinole diameter: 110 mm • Taper: MK4 • Stroke: 100 mm • Thrust force: 850 daN • Fluids and tanks • Coolant tank capacity: approx. 235 l (up to 270 l in L-version) • Hydraulic tank: approx. 31 l • Central lubrication tank: approx. 2–3 l • Electrical data • Electrical connection: 3-phase 400 V + N + PE • Frequency: 50/60 Hz (also stated as 50 Hz) • Rated current: 44 A • Fuse protection current: 50 A • Rated current protection: 63 A • Connected load: approx. 40 kVA (up to 50 kVA with 2 spindles) Guedpfoyyzucsx Akyoc • Protection class: BA 3 (Chap. 3.4.5) • Network type: TN network with grounded neutral point • Recommended protection: without FI switch (recommended) Additional equipment • Steady rest (note: sensor bang-up replacement needed) • Tailstock • Chip conveyor • Oil mist extraction system • Possibly chuck and tool holder (to be confirmed) Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, mileage: 556,659 km, power: 350 kW (475.87 HP), first registration: 07/2020, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, color: red, gearing type: automatic, emission class: euro6, loading space length: 7,350 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Vehicle No.: 118-26 Mercedes-Benz 2548 Actros L 6x2 BDF Low Liner Body: Interchangeable body / Sales vehicle with side panels and tarpaulin Matching tandem trailer available at an extra cost! Registration date: 07.2020 * 2 x bunk beds * 1 x seating area * Cooler box Gusdozbv Ixopfx Akysc * 2 x tank 500+500 liters * Lift axle * Tire condition approx. 50-60% * German registered vehicle TANDEM TRAILER ACKERMANN available at an extra cost! Special equipment: Airbag driver side, alarm system, trailer stabilization program TSA, work lights, audio system: digital radio DAB / DAB+, lowered exhaust system, equipment package: Driving, equipment package: Climate, equipment package: Comfort, equipment package: Media, equipment package: Visibility, equipment package: Storage space, batteries arranged one above the other, brake connection standard and DuoMatic, additional compressed air tank, compressed air horn, electrical pre-wiring in the cab 24V / 100 A, driver assistance system: turning assistant, cab: with air suspension, cab: shaving mirror, cab: smoke detector, transmission 12-speed - Type: G 281-12, notebook holder, folding table in the bulkhead, comfort telephony (Bluetooth) with inductive charging cradle, comfort upper bunk, wide, mudguards 3-part, mudguards 3-part with splash guard, fuel tank: 500 liters aluminum, left, fuel tank: additional tank 500 liters aluminum, right, air intake integrated, air filter with extended service life, air compressor 2-cylinder, engine brake reinforced, PremiumComfort mattress upper, wheelbase 4600 mm, frame overhang 1950 mm, tire pressure monitoring system, reversing warning system audible and hazard warning lights (warning signal outside), rear crossmember reinforced, key with remote control additional (2), interface fleet management system, drawers under the bulkhead, circuit breaker, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat velour, seats in the cab: driver seat sprung seat comfort, seats in the cab: SoloStar Concept, sound system, stabilizer additional, rear axle / trailing axle, steel rims 11.75x22.5 (on front axle), stowage flap outside left, socket 12V / 15 A in passenger footwell additional, socket 24V / 25 A in passenger footwell, socket cab 24V, steep-shoulder rims 11.75x22.5 (on trailing axle, reinforced), preparation for 4 surround view cameras (display in the on-board monitor), preparation for additional headlights, curtain sleeping cabin, warning device seat belts Additional equipment: Emission standard EURO 6, axle configuration: 6x2, axle load front axle 8.0 t, Actros 5, Actros cab L, approach / front mirror heated, trailer brake 2 - line, connections left, trailer socket 24V / 15-pole, exhaust to the right outside, equipment package: Powertrain 2, exterior mirror camera MirrorCam, differential lock rear axle, torque increase 12th gear, compressed air connection in the cab, compressed air tank steel, compressed air unit high, compressed air unit with condensate monitoring, automatic switch-on for driving lights (light sensor), driver assistance system: Attention-Assist (fatigue detection sensor), driver assistance system: Autonomous emergency braking assistant (Active Brake-Assist 5), driver assistance system: Lane keeping assist, cab: cab access fixed, cab: interior package chrome, cab: tilting device hydraulic, cab: L GigaSpace, 2.50 m, floor level, vehicle outline lights LED, suspension: air / air (full air), electric windows, vehicle without rear window, gener

Condition: ready for operation (used), Year of construction: 2018, operating hours: 4,493 h, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, spindle motor power: 13,000 W, spindle speed (max.): 12,000 rpm, total height: 2,507 mm, total width: 1,620 mm, overall weight: 5,200 kg, controller manufacturer: FANUC, controller model: i Series, product length (max.): 3,230 mm, table load: 200 kg, tool weight: 2,800 g, number of axes: 3, This 3-axis DOOSAN T 3600 D was manufactured in 2018. It features an X-axis travel of 520 mm, Y-axis travel of 360 mm, and Z-axis travel of 350 mm. The machine includes a table size of 2x 650 x 375 mm with a loading capacity of 2x 200 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN T 3600 D machine we have for sale. Contact us for further details. Guedpfx Akjzb Ii Ueyoc - Controlled Axes: 3 (X, Y, Z)- Distance from Spindle Nose to Table Top: 150-500 mm- Table Size: 2x 650 x 375 mm (Pallet changer system)- Table Loading Capacity: 2x 200 kg- Table Surface Type: T-Slot- Spindle Taper: ISO #30 (BT30)- Spindle Power: 13 kW (15 min) / 3.7 kW (Continuous)- Max. Spindle Torque: 82.7 N-m- Rapid Traverse Rate (X / Y / Z): 48 / 48 / 56 m/min- Tool Storage Capacity: 21 stations (Upgraded from standard 14)- Max. Tool Diameter (With / Without Adjacent Tools): 80 mm / 150 mm- Max. Tool Length: 200 mm- Tool Change Time (Tool-to-Tool / Chip-to-Chip): 1.45 sec / 2.22 sec- Main Power Supply: AC 380V, 3-Phase, 50/60Hz- Rated Power Capacity: 19.01 kVA- Full Load Current: 32.05 A- Compressed Air Supply: 0.54 MPa- Coolant Tank Capacity: 200 L (Base) / 270 L- Control System Power-On Time: 15,979 Hours- Machine Operating Time: 14,317 Hours- Actual Machining Time: 4,493 Hours- Total Completed Workpieces: 2,460,030 ea- Internal High-Pressure Cooling: 20 bar- Coolant Pump Delivery Pressure: 4.5 bar (1.1 kW, 30 l/min KSS Pump)- Additional Equipment: Enclosed top machine cover (Top-cover), Oil skimmer, Pneumatic clamping preparation (1 pair per pallet), Automatic workspace door with safety edge, 3-color status signal tower, Workspace lighting, Rigid tapping function, Workpiece coordinate system addition (G54.1 P1-48) Technical Specification Driven Tools No

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,559 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 120 mm, travel distance Z-axis: 280 mm, spindle motor power: 5,500 W, total height: 1,700 mm, total width: 1,370 mm, overall weight: 2,300 kg, controller manufacturer: FANUC, controller model: Series 0i-TF Plus with 10.4" Touch Display, product length (max.): 1,360 mm, number of axes: 2, This Takamaz XT 6 was manufactured in 2020. It features a maximum turning diameter of Ø180 mm and a maximum turning length of 240 mm. If you are looking to get high-quality turning capabilities, consider the Takamaz XT 6 horizontal turning machine we have for sale. Contact us for further details. Gusdpfx Akszb H T Eeysc - Maximum Turning Diameter: Ø180 mm- Maximum Turning Length: 240 mm (depending on clamping device)- Rapid Traverse (X / Z): 18 / 24 m/min- Maximum Spindle Torque: 63.6 Nm- Spindle Bearing Inner Diameter: Ø75 mm- Spindle Nose: A2-5 short taper- Maximum Bar Capacity: 35 mm- Maximum Chuck Size: 203 mm (8 inch)- Spindle Center Height Over Floor: 950 mm- Tool Turret: 1 x 8-station turret (Direct mounting / boring cassettes)- Shank Height for External Turning: 20 x 20 mm- Maximum Shank Diameter for Boring Bars: 25 mm- Base Machine Dimensions (Footprint without accessories/transformer): 1,360 x 1,370 mm- Overall Height with Loader: 1,700 mm- Power Connection / Supply: 18 kVA / AC200V, 3-Phase, 50/60Hz- Rated Power (Nameplate): 13.0 kVA- Full Load Current: 36 A- Interrupting/Short-Circuit Rating: 2.5 kA- Working Hours (As of 2026/05/22 08:51:21):- Control On Time: 4525 Hours- Operating/Running Time: 1975 Hours- Processing Time: 1559 Hours- Free Use Time: 1733 Hours- Total Parts Counter: 25,600 pieces- Workpiece Counter: 21,801 pieces- Included Automation Equipment:- Fanuc Compact Loader FC60 (2-axis servo loader with two parallel pneumatic grippers, max workpiece diameter 60 mm, max weight 1.0 kg per hand, 90° pneumatic tilting unit)- Integrated parts infeed conveyor belt (length 800 mm)- Integrated parts outfeed conveyor belt (length 600 mm)- Additional Equipment, not included:- Chip conveyor- Reinforced high-pressure coolant pump- Power chuck- Tool holders- Hydraulic power pack- SMW-Autoblok VNK 70-37 hydraulic hollow clamping cylinder- Complete coolant system with standard pump- Leveling elements / alignment plates- Control cabinet with fan ventilation- Electrical transformer Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Catalogue number: 7840 TECHNICAL DATA - Max. workpiece width: 630mm - Max. workpiece height: 110mm - 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration + pad + metal roller - Top section: - Metal infeed roller, slip type - Unit - Metal slip roller - Unit - Metal slip roller - Bottom section: - 2 metal slip rollers - Feed belt - 2 metal slip rollers - Pneumatic oscillation of belts - 2 feed speeds Gsdpfxjzcu N Ds Akyjuc - Motor: 2×7.5kW - Electric table lift - Operating pressure: 6-8 bar - Extraction port diameter: 2x160mm - Overall dimensions (LxWxH): 1650x1060x1970mm - Weight: 972kg ADVANTAGES – Polish-made – 2 processing units – Not repainted – Very good condition – Used sander Net price: 20,900 PLN Net price: 4,980 EUR (calculated at 4.2 EUR) (Prices may change with larger exchange rate fluctuations)

Condition: excellent (used), Catalogue No.: 7810 TECHNICAL DATA max working width: 630 mm max working height: 110 mm 2 units: 1) grooved rubber roller for calibration 2) grooved rubber roller for calibration + pad + metal roller *from above: metal feed-in slip roller unit metal slip roller unit metal slip roller *from below: 2 metal slip rollers feed belt 2 metal slip rollers pneumatic belt oscillation 2 feed speeds motor: 2×7.5 kW electric table elevation operating pressure: 6-8 bar extraction port diameter: 2x160 mm overall dimensions (L/W/H): 1650x1060x1970 mm weight: 972 kg – Polish manufacture – 2 units – unpainted – very good condition – used sander Net price: 25,900 PLN Net price: 6,160 EUR (at exchange rate 4.2 EUR) Gujdezcu Iaspfx Akyoc (Prices may fluctuate with significant currency changes)

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Gusdsv D Rg Djpfx Akysc Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) Gsdpovu Hgbsfx Akyeuc - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. Gedpfxst Tqy Eo Akyouc The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm Gedpfx Aksvnv Tqsysuc - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: excellent (used), Year of construction: 2004, Please read the technical specifications thoroughly. If you are considering this machine as a potential investment, we kindly request your complete credentials with an accurate telephone number and email address in order to submit an offer. We are offering an exceptionally high-quality precision lathe. In its class, this is arguably the best German lathe ever built. BOEHRINGER Precision Lathe Model DUE 500 Year of manufacture: 2004, incl. CE certificate and central lubrication Machine no.: T1022.2027-00 Centre height: 240 mm Swing over bed: 500 mm Swing over cross slide: 285 mm Gujdpfxew Rdtho Akyjc Centre distance: approx. 1,200 mm Turning length (effective): approx. 1,000 mm Bar capacity: 62 mm Spindle nose: DIN 55027 size 6 Spindle diameter: 100 mm Drive power: 11 kW Max. torque: 2,000 Nm 24 spindle speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill travel: 190 mm Tailstock taper: MK 5 Space requirement: approx. 4,000 x 1,525 mm (L x W) Weight: approx. 4,300 kg Accessories included: - 3-axis digital readout HEIDENHAIN - Central lubrication - Electrically interlocked chuck guard - Coolant system - Chip protection rear wall - Röhm lathe chuck T 250 mm incl. various clamping jaws - Telescopic cover for leadscrew and support to bed - Machine lamp - Multifix C tool post + 4 holders - Live centre - Operating manual - Circuit diagram - Rapid traverse in longitudinal and cross slide Condition: The machine is in very good technical and visual condition. Backlash in cross slide: approx. 0.3 mm, top slide: approx. 0.15 mm Spindle nose runout: approx. 0.006 mm Bed geometry: deviation approx. 0.01 mm over 750 mm of bed length (measured on flat guideway with dial indicator towards the chuck) The following parts have been renewed: - Oil change - New hoses for central lubrication - New wipers - Key for engagement lever replaced - Locking pin for engagement interlock replaced Net price EXW. Delivery with our own truck can be offered for an additional charge.

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 5,000 rpm, travel distance X-axis: 195 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 380 mm, spindle motor power: 15,000 W, overall weight: 8,000 kg, controller manufacturer: MITSUBISHI, controller model: M730VS, number of axes: 8, This 8-axis Citizen BNE-51MSY was manufactured in 2018. It features a maximum bar diameter of Ø 51 mm and a spindle speed of 5,000 min-1. The machine includes 12 turret stations and a slide stroke of 195 mm in the X1 direction. If you are looking to get high-quality turning capabilities, consider the Citizen BNE-51MSY horizontal turning machine we have for sale. Contact us for further details. • Maximum Bar Diameter (SP1): Ø 51 mm • Maximum Bar Diameter (SP2): Ø 51 mm • Spindle Speed (SP1/SP2): 5,000 min-1 • Spindle Motor (SP1): 15/11 kW (15min./cont) • Spindle Motor (SP2): 7.5/5.5 kW (15min./cont) • Turret Stations: 12 ST. (HD1) / 12 ST. (HD2) • Revolving Tool Motor: 2.2 kW • Revolving Tool Torque: 20 Nm • Revolving Tool Speed: Max. 6,000 min-1 • Slide Stroke (X1/Z1): 195 mm / 380 mm • Slide Stroke (X2/Z2): 195 mm / 175 mm • Slide Stroke (Y1): 80 (± 40) mm • Slide Stroke (B): 450 mm • Rapid Feed Rate (X1/Z1): 18 m/min / 20 m/min • Rapid Feed Rate (Y1): 12 m/min • Power Supply Capacity: 44 KVA • Voltage: AC 200/220 V • Coolant Tank Capacity: 350 L • Barfeeder included Technical Specification Counter Spindle Yes Gjdpsywy Shofx Akyjuc Driven Tools Yes

Condition: used, mileage: 105,901 km, power: 382 kW (519.37 HP), first registration: 07/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, color: white, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, parking heater, soot filter, Tractor Unit 4X4 Hydrodrive MAN TGX 18.520 BL SA First registration 07/2024 Mileage 105,901 km GM cab with 2 bunks, cab air suspension, swinging steps, 3-piece steel bumper, Light & Vision Plus safety package, driver comfort package, interior lighting package Plus, storage package, comfort driver's seat. Driver's seat heated and ventilated, rotating vario passenger seat, fully LED lighting, LED headlights, LED fog lights, high beam assistant, automatic driving light control, 12.3-inch instrument cluster, MAN truck navigation, Climatronic air conditioning, auxiliary water heater, fridge under the bunk, 220-volt socket. MAN TipMatic 12.28 OD gearbox functions: EfficientRoll, Idle Speed Driving, rocking function, off-road shifting program, dynamic engine torque management, reinforced engine brake EVBec Suspension: leaf/air Wheelbase 3,600 mm, short and highly maneuverable Gujdpfxoy Aq Tge Akysc Aluminum fuel tank 580 liters 2-line MEILLER tipper hydraulics, large aluminum hydraulic oil tank approx. 200 L, switchable high/low-pressure system. Tyres: Front axle 385/65 R 22.5, tread depth NEW, 100% Rear axle 315/80 R 22.5, tread depth 10 to 12 mm Fifth wheel height approx. 1,220 mm Full safety package with Lane Change Assist LCS and Turning Assist, ACC distance cruise control, EBS, full braking assistant, emergency braking assistant EBA, Lane Departure Warning LDW, digital axle load display, traffic sign recognition. RENTING is the new BUYING—immediately available from us in full-service rental.

Condition: used, mileage: 44,637 km, power: 375 kW (509.86 HP), first registration: 02/2025, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, color: black, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 AERO Turbo-Compound 4X2 Low-Liner Tractor Unit First Registration: 02/2025 Mileage: 44,637 km Condition: Like new Globetrotter XL Safety Cab, cab air suspension, Comfort Package, Electrical Package, Extended Living Package, 2 bunks, I-Park Cool stationary air conditioning, comfort driver and passenger seats, heated, camera-monitor system with close-range camera, 220-volt socket, stainless steel microwave Diesel engine 12.8 L displacement, turbo compound charger, 510 HP / 375 kW, 2,856 Nm torque Reinforced engine brake Volvo Engine Brake+ I-Shift 12-speed gearbox, I-See with map-based topography and traffic information Gujdpfxjy D E E Hs Akyjc Tyres: Front axle 355/50 R 22.5 Rear axle 295/55 R 22.5 Height-adjustable fifth wheel for coupling heights of 980 and 1,150 mm Black gloss steel rims Three ride heights for air suspension Dual battery system Fuel saving package 475 L and 505 L fuel tanks, AdBlue tank 99 L Extended Safety Package with active lane guidance, Volvo Dynamic Steering, and all available safety systems, complete LED lighting, 5x LED work lights Full aerodynamic kit including side skirts between the axles NATO socket RENTING is the new BUYING – available from us with full-service and rental-purchase options.

Condition: used, mileage: 167 km, power: 129 kW (175.39 HP), first registration: 11/2025, fuel type: diesel, overall weight: 5,500 kg, color: black, gearing type: automatic, number of seats: 2, total length: 6,061 mm, total width: 2,169 mm, total height: 2,960 mm, loading space length: 3,540 mm, Year of construction: 2024, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Subject to errors and prior sale! Internal number: 1252. 2754692 ----EQUIPMENT * Storage: Central storage compartment - with USB charging connection * Airbag for passenger with belt tensioner * Trailer coupling: Ball head with 13-pin trailer socket (12 V) * Roof storage - above the windshield * Key: Third vehicle key with remote control * No partition - without protective grille * Body manufacturer interface with extension module & CAN interface - CAN-Open * Air conditioning in the driver's cab with automatic climate control as well as pollen filter and outside temperature display including air conditioning compressor 170 cm³ * Comfort dashboard * Comfort headrests - comfort textile foam headrest * Fuel tank 90 l * Charging light - outside above the rear door * Steering wheel: Leather steering wheel * Radio: Radio HI-Connect + Navigation - DAB radio with 7" color display - TomTom car and truck navigation - Driving style analysis - voice recognition - Apple CarPlay - Android Auto * Spare wheel on steel rim * Spare wheel holder in the cargo area * Rear view camera and external charging light above the rear doors * Seat: static comfort seat for driver, multi-adjustable, with armrest and lumbar support * Seat: luxury seat for front passenger - with armrest and lumbar support - adjustable in height, inclination and length, hydraulically suspended * Seat: luxury seat for driver - with armrest and lumbar support - adjustable in height, inclination and length, hydraulically suspended * Cruise control * Hot water auxiliary heating with timer Gedpfx Akjxf R T Ajysuc * Heated windshield in the area of the windshield wiper pad. * AdBlue container 20l * Airbag for driver with belt tensioner * Outside mirrors electrically adjustable and heated Wide-angle mirror, integrated indicator * Battery 110 Ah * On-board computer * Third brake light * Diesel particle filter - controlled via EDC - Catalytic converter with SCR * Digital EC control device DTCO 4.0 * Torsion bar suspension on the front axle - front axle load increased to 2100 kg * Tachometer * Electric windows, left and right * Generator Eco-Smart 3080 W (14 V x 220 A) * Speed limiter 90 km/h * Gearbox: 8-speed automatic 8-speed torque converter automatic transmission ZF 8 HP including gear display * Rear door, opening angle 180° * Body manufacturer interface * Headrests * Crankcase ventilation, heated * Paintwork: Plain paint * Manual headlight range adjustment * Model designation on both sides * Upholstery: fabric seat covers made of breathable textile * Sliding door on the right side with light switch * Power steering * Seat belts, height adjustable for driver and passenger seat * Splash flaps front and rear * TFT display instrument cluster in color * Maintenance indicator * Electronic immobilizer * Tinted windshield and side windows in driver's cab * Central locking with remote control ... and much more ----The vehicle is unprocessed! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing / leasing also possible without a deposit! Do you have any questions? We are happy to advise you!

Condition: used, mileage: 120,572 km, power: 132 kW (179.47 HP), first registration: 06/2021, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 8,800 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,000 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 1330.5409538 ----EQUIPMENT Gusdsrt Smiepfx Akyjc * Storage: Central storage compartment - with USB charging port * Dual tires on the rear axle * Bodybuilder interface with expansion module * Air conditioning in the driver's cab with automatic climate control - including pollen filter and outside temperature display - including 170 cm³ air conditioning compressor * SAXAS box body with 600 cm loading area length * 117 l fuel tank * Tail lift * Steering wheel: Steering column adjustable in 2 positions - height and tilt * Air suspension on the rear axle * Radio: DAB digital radio - Digital radio with high-speed dual tuner - Voice recognition, USB port, Bluetooth - Hands-free system - Multifunction steering wheel * Rear cross member * Cruise control * 20 l AdBlue tank * Driver's airbag with belt tensioner * Comfort dashboard - Blue applications on the dashboard and door panels - Map storage and cup holders, as well as a foldable document compartment in the center console * Electrically adjustable and heated exterior mirrors with wide-angle mirrors and integrated turn signals * Seat: Passenger seat with three-point belt for the center seat * Diesel particulate filter - controlled by EDC - Catalytic converter with SCR * Digital EC control unit DTCO 4.0 * Torsion bar suspension on the front axle - front axle load increased to 2100 kg * Tachometer * Electric windows, left and right * Transmission: 8-speed automatic transmission with 8-speed torque converter ZF 8 HP including gear indicator * Driver's seat headrest adjustable for height, angle, and length * Heated crankcase ventilation * Radiator grille with chrome inserts * Paint finish: Solid color * Manual headlight range adjustment * Model designation on both sides * Upholstery: Fabric * Rear window in driver's cab * Rear panel trim in driver's cab * Power steering * Front mud flaps * TFT display in instrument cluster Color * Trailer socket preparation * Maintenance indicator * Electronic immobilizer * Tinted windshield and cab side windows * Central locking with remote control ... and much more ----The vehicle is unfinished! Nationwide delivery is available for an additional charge. Errors and prior sale excepted. We are happy to accept your vehicle as part payment. Financing/leasing also possible without a down payment! Do you have any questions? We'd be happy to advise you!

Condition: used, mileage: 32 km, power: 74 kW (100.61 HP), first registration: 10/2024, fuel type: diesel, overall weight: 2,270 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,825 mm, total width: 2,137 mm, total height: 1,852 mm, loading space length: 2,154 mm, loading space width: 1,496 mm, loading space height: 1,263 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal Number: 76984 LOCATION: 04425 Taucha, Gerichtsweg 4 Telephone for inquiries: Mr. Ralph Bergel: By email: Errors and interim sale reserved! SPECIAL EQUIPMENT * 2nd remote control key for central locking instead of conventional key * Towing device preparation – Preparation kit for retrofitting a trailer hitch incl. ESP trailer stabilization * Passenger front airbag incl. deactivation function and glove compartment with cover * Heated rear window * LED load compartment lighting * Rear Park Pilot system * Seat Package 18: Fabric "Capitol/City" in Ebony (black) – Dual passenger seat (with storage compartment under the smaller section), variably foldable and collapsible – 3-way manually adjustable driver’s seat – Height-adjustable headrests – Manual lumbar support (driver’s seat) * Socket: 12-volt connection in the load/luggage compartment * Partition wall to load compartment with pass-through opening and window ADDITIONAL EQUIPMENT * ABS with EBD * Driver's airbag * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, slim format * Reinforced battery * Hill-start assist * Rubber flooring at the front * On-board computer incl. outside temperature display * Front overhead shelf, spanning the full width of the cabin, incl. side hand grips * Diesel particulate filter (DPF) with SCR catalyst and AdBlue tank * Twin rear doors without windows * Tachometer * Third brake light * ESP with traction control incl. Torque Vectoring Control and adaptive load control * Front power windows – with quick-down function for driver‘s side * Ford Easy Fuel – Convenience tank cap and misfuel protection * FordPass Connect * Glove compartment with cover * Front interior lighting with delay function * Front air conditioning incl. semi-automatic recirculation * Molded plastic load floor protection * Side cargo area cladding, half-height * Steering column, adjustable in height and reach * Alternator/generator * Front center console – open with storage area, 2 cup holders * Fog lights * Emergency brake light – hazard warning activation during hard braking * Radio: Ford Audio System 2 – DAB/DAB+ radio – analog radio (FM/AM) – USB port – Bluetooth interface – audio remote control on steering wheel * Wheels: Tire repair kit * Wheels: Steel rims 6.5 J x 16 with 205/60 R16 tires and wheel covers * Sliding door, rear right * Protective side moldings, plastic * Electro-mechanical power steering (EPAS) * Emergency Brake Assist (EBA) * Seat belts – front pre-tensioners and load-limiters – unfastened seatbelt warning for driver and passenger * Automatic door lock (45 sec.) * Sun visor for driver and passenger * Front spoiler lip * Start-stop system * Dust and pollen filter * Socket: 12-volt supply at the front center console * Front bumper and rear bumper end caps painted in body color * Daytime running lights Guodpfx Aeywc R Hskyec * Partition wall to load compartment without window * Child lock on sliding doors * Door handles, black * Tie-down loops * Electronic immobilizer * Heat-insulating, lightly tinted glazing * Central locking with remote control – Door lock only on driver’s door – 2 keys, including 1 remote control key ...and much more. 1st owner. German specification. Errors and interim sale reserved. 2 years factory warranty from first registration (extendable upon request). We are happy to take your vehicle in part exchange.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 37,000 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain iTNC 530, The machine was previously owned by a well-established Formula 1 team from Central Europe! The milling head has been freshly inspected by the machine manufacturer, making it partially overhauled and fully functional. The machine was always covered by a maintenance contract with the manufacturer. TECHNICAL DETAILS Travel range X-axis: 5,000 mm Travel range Y-axis: 3,000 mm Travel range Z-axis: 1,750 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Feed rate Z-axis: 65 m/min Spindle speed max.: 20,000 rpm Axis acceleration: 5 m/s² Torque max.: 63 Nm Holding torque (clamped) A & C axis: 2,000 Nm Tool interface: HSK 63A MACHINE DETAILS Control system: Heidenhain iTNC 530 Handwheel: HR420 Spindle hours: approx. 37,000 h Power-on hours: approx. 83,000 h Spindle power: 20 kW Power consumption: 130 kW Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Footprint without peripherals (L x W x H): 7,500 x 8,500 x 6,600 mm Total weight: 90,000 kg Gsdpjzcqncsfx Akyouc EQUIPMENT 2-axis tilting milling head 5 Speed infinitely adjustable Minimum quantity lubrication 50-position tool changer Work area enclosure Note: The machine table is not included in the scope of supply, and the drive cables for the X, Y, and Z motors need to be replaced due to their age. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by prior arrangement.