Used Vibo Screw for sale (5,193)

Condition: new, Year of construction: 2026, English translation: Ljdpfx Ajybvkasfzerg The LUFT 700 VSD+PM COMPACT oil-lubricated compressor with dryer features a traditional belt-driven transmission, which results in significantly easier maintenance and lower service costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and when worn, the belt can be easily replaced with a new one. This design also ensures longer service life of components. The absence of a rigid connection between the motor and the compressor’s working elements reduces wear and mechanical stress. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, which gives access to key device information, increasing flexibility and control over processes. Technical parameters Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection diameter (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 0101890072, total length: 880 mm, total width: 810 mm, total height: 690 mm, operating pressure: 10 bar, noise level: 72 dB, Equipment: refrigerant dryer, BSC-20 "FINI" Compressor Ledsxrl Axopfx Afzsrg Motor power: 15 kW; pressure: 10 bar; capacity: 1720 l/min; noise level: 72 dB; dimensions: 88 x 81 x 69 cm; weight: 215 kg. Includes air dryer.

Condition: excellent (used), Aerzen VM 9 R Delta Screw Compressor with sound insulation hood Suction pressure: 1 bar Suction volume: 600m³/h Motor power: 55 kW Ljdpfsgg Sgasx Afzorg Very good condition, directly from production!!!

Condition: excellent (used), Year of construction: 2022, operating hours: 4,500 h, functionality: fully functional, overall weight: 625 kg, total length: 1,460 mm, total width: 800 mm, total height: 1,530 mm, pressure (max.): 10 bar, Equipment: refrigerant dryer, type plate available, For sale is a Kaeser screw compressor ASK 34 T SFC in excellent condition. Year of manufacture: 2022. Initial commissioning: 05/2023. Variable speed drive (SFC). The output is continuously adapted to the actual air demand. Very high energy efficiency with fluctuating requirements. Fully equipped with integrated refrigeration dryer (T). Immediately supplies dry and clean compressed air. Significant energy savings. The compressor was operated in a bookbinding workshop (very clean environment). Lrjdpfx Aox U S Ucjfzsg

Condition: excellent (used), For sale: screw conveyor, 6.3 meters long, 30 cm screw width, with frame, made entirely of stainless steel. Lrodpfjwzvwuex Afzsg

Condition: good (used), MANUFACTURER: KAESER MODEL: DSD201 S/N: 1089 YEAR: 2001 POWER (kW): 110 Ledeyaq Tgspfx Afzsrg CAPACITY (m3/min): 20.9 PRESSURE (bar): 8

Condition: good (used), MANUFACTURER: KAESER MODEL: DS141 SERIAL NO.: 1003 Lrsdpfx Aeyaq Nzjfzjg YEAR: 1997 POWER (kW): 75 CAPACITY (m3/min): 13 PRESSURE (bar): 8.5

Condition: good (used), S006901 MANUFACTURER: Kaeser MODEL: DS140 SERIAL NO.: 142860 Lredpjyaq E Aofx Afzsg YEAR: 1996 POWER (kW): 75 CAPACITY (m3/min): PRESSURE (bar): 7.5

Condition: excellent (used), MANUFACTURER: ATLAS COPCO MODEL: GA132VSD FF SERIAL NUMBER: APF136837 YEAR: 2008 POWER (kW): 153 CAPACITY (m3/min): 22.9 m3/min - 381 l/s PRESSURE (bar): 8.5 FREQUENCY INVERTER: yes BUILT-IN DRYER: yes HEAT EXCHANGER: no COOLING (AIR/WATER): air ON TANK: no DOCUMENTS: no CONNECTION: 2 NEW/USED: USED Lrjdpfx Aextblxofzsg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: API170792, overall weight: 1,670 kg, volume flow: 1,005 m³/h, pressure (max.): 10 bar, Equipment: type plate available, PROD. GRASSAIR TYPE RLR125 V S/N API170792 YEAR 2013 CAPACITY (kW) 90 OUTPUT (m3/min) 16.75 CIS (bar) 10 INVERTER yes BUILT-IN DRYER no EXCHANGER yes ON THE TANK no DOCUMENTS no Lrsdpfxewn Dltj Afzeg CONNECTION 2 NEW/USED USED

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 Lrsdpfed Sg Hcjx Afzog 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed Lrsdpfx Afeiyx Uzjzog 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Ledsiyya Aopfx Afzsrg Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Lsdoiyyndspfx Afzorg Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer Ledpfxoiyynwe Afzorg > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 2017, condition: used, screw size 30 mm Capacity 1000 kg/h Drive 240 kW L/D Lrodpfxjb Niqhe Afzsg

Condition: good (used), Year of construction: 2005, Gardner Denver ES 22-10 Air Compressor with Pressure Air Receiver Tank. Manufacturer: Gardner Denver Model: ES 22-10 Compressor type: Rotary screw compressor Year of manufacture: 2005 Maximum pressure: 10 bar Motor power: 22 kW Rotational speed: 2780 rpm Weight: 628 kg Electrical supply: 400 V / 50 Hz Lodsx Tctgopfx Afzjrg CE marked Air Receiver Tank Manufacturer: Galvanoimis Oy Location: Pirkkala, Finland Year of manufacture: 2005 Tank specifications (according to nameplate): Maximum allowable working pressure: 10 bar Test pressure: 14.3 bar Volume: 1800 liters Maximum internal temperature: +50 °C Minimum internal temperature: −40 °C CE marked General Good maintenance and service history Air dryer included. 2 similar sets available. Industrial compressor package suitable for workshop or production use. Compressor and tanks manufactured in Finland. 📩 Contact for availability and delivery options.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Lodpfei Dtbujx Afzsrg Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : Lrjdpfx Aji Dtbqefzog e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Year of construction: 2004, condition: excellent (used), Cylinder 1350 + 55 mm screw Year 2004 LD 24 Lodpfxor Avfvo Afzsrg

Year of construction: 2006, condition: excellent (used), 8x pieces of screw intake mills PRM Type:MGK 400/175 Lrsdpjhry Tiofx Afzsg Year 1992 ,1994 Available 8x pieces

Condition: good (used), Year of construction: 2009, operating hours: 17,615 h, We are selling, on behalf of a customer, a very well-maintained Kaeser ASD 47 T screw compressor. The compressor will be dismantled and prepared for loading. Ledex Tfzyepfx Afzsrg

Condition: good (used), Stock number: 2852 Manufacturer: Poland Year of manufacture: 1974 Machine number: 33891 Type / Model: TUD 50 Centre distance: 2,000 mm Spindle bore: 56 mm Centre height: 250 mm Swing over bed: 500 mm Lrsdpjx Uykxefx Afzsg over cross slide: 300 mm Speed range: 18 to 1,800 rpm Longitudinal feed: 0.08 to 3.26 mm/rev Cross feed: 0.04 to 1.63 mm/rev Power connection: 7.5 kW Accessories/Equipment: 3-jaw chuck Condition: good Weight: approx. 3.5 t Dimensions: 3,500 x 1,150 x 1,600 mm

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, controller manufacturer: Siemens, screw diameter: 75 mm, machine/vehicle number: DE27666, TECHNICAL DETAILS Lredpsx Npbpofx Afzjg Output: 200–450 kg/h Screw diameter: 2 x Ø 75.0 mm L/D: 36D MACHINE DETAILS Control system: Siemens Materials: PE, PP, PS, ABS Drive: 143 kW (DC) EQUIPMENT Co-rotating twin-screw Degassing Note: Two screw elements are broken. A side feeder connection or S-cylinder can be offered separately.

Condition: good (used), Scope as per images Lredpjx U D D Asfx Afzjg Continuously variable speed from 15 to 3,000 rpm Drive 2.2 kW