Used Center lathes 300-399mm turning diameter over bed for sale (190)

Condition: used, Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 160 3205, Sale only within EU member states! No private sale MAE can be inspected. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tooling, as well as for compliance with all safety and environmental protection safety and environmental protection requirements. Any warranty is excluded. Cgslinsuxl Eze Hi Dst For the correctness of the technical data and year of construction, for the completeness of accessories and tools as well as for compliance with all safety- and environmental-requirements, mentioned in the accident prevention regulations, we take over no guarantee.

Condition: good (used), Year of construction: 2010, Conventional lathe, center high 254 mm, between centers 1000 mm, bore Ø 80 mm, 12 speed 30 - 2200 rpm, motor 5,5 kw, camlock 6'', dimensions 230x115x165 cm, weight ca. 1750 kgs; equipement: DRO on 2 axis, coolant device, 3-jaws chuck Ø 250 mm, rotating pin, tool post MULTIFIX C with toolholders, steady and following rest Cgolistv Iy Een Hi Det

Condition: used, L + Z lathe HOLZMANN type ED 914GN Mach. No. 20265 year of manufacture 2006 Center distance 800 mm Turning diameter over bed 300 mm Center height over bed 150 mm Turning diameter over support 190 mm Center height over support 95 mm Spindle bore 38 mm Spindle speed 70 - 1400 rpm. 9 steps Feed lengthwise and facewise Chuck flange short taper DIN 55029 D1-4 Camlock Ø 63 mm Tailstock inner taper MK 3 Drive power 1.5 kW Mains connection 400 volts, 50 Hz - Spindle speed over 9 gear stages - 4-jaw lathe chuck / faceplate BISON Ø 200 mm with individual adjustment of the stepped jaws Cgolijv Hhf Njn Hi Dst - Foldable chuck guard - Emergency stop Space requirement L x W x H 1600 x 800 x 1200 mm Weight 430 kg

Year of construction: 1986, Condition: used, Weiler Praktikant 160 lathe built in 1986 with 3-axis Heidenhain digital readout, three-jaw chuck, Multifix. ,chuck guard . Weight approx. 1000 KG. Machine in a good Cgelsrg Dudsin Hi Dst good working condition , ready for demonstration under power on request.

Condition: ready for operation (used), Center height: 165 mm Center width: 1000 mm Swing diameter: over bed 330 mm Spindle bore: 36 mm Spindle mount: size 4 Tailstock taper: 5 MK Spindle speeds: 30 - 2500 rpm Feeds: longitudinal/transverse 0.045-0.63/0.023-0.324 mm/rev Thread pitches: 0.6 - 0.56 mm Celijv E D Nbjn Hi Dogt Electrical connection: 380 V, 2.2 kW Space required: 1800 x 900 x 1480 mm Weight: approx. 550 kg

Condition: excellent (used), Year of construction: 1997, Functionality: fully functional, Weiler Commodor lead and pull spindle lathe with 3-axis digital readout from Weiler very good condition !!! CE conform Technical data: >> Year of construction 1997 Machine-No.3456 >> Center height 180 mm >> Center width 1000 mm >> Spindle speed : from 13 to 2000 rpm >> spindle clearance 56 mm >> Short taper spindle head DIN 55027 size 6 with bayonet lock >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg Colin Hierp E Uto Djgt >> Spindle brake switchable >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital readout from Weiler >> three-jaw chuck Röhm wedge bars 200mm 1 set of jaws >> Parat steel holder with 7 pockets >> Bed stop >> Electronic spindle protection >> Coolant device About the machine : We are offering a Weiler Commodor lathe in very good, fully functional condition. The Commodor is one of the largest manual lathes manufactured by Weiler. A very robust and powerful machine. The 3-axis digital readout from Weiler makes working even easier and more accurate. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This new generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and try out this machine on site under power. Machine is available immediately.

Condition: good (used), Technical characteristics Cholet 350 Center height (mm) 170 Distance between centers (mm) 1000 Diameter above the bed (mm) 350 Diameter above the saddle (mm) 172 Spindle bore (mm) 42 Number of spindle speeds18 Spindle speed (RPM) 32 to 1600 Longitudinal feeds (mm/min) 0.05 to 0.7 Number of metric steps 28 Metric steps 0.5 to 7 Number of whitworth steps 28 Whitworth steps 4 to 56 threads per inch Celisv A Rp Aen Hi Degt Motor (hp) 7 Dimensions (mm) 2670x1200x1040 Weight (kg) 2150

Condition: used, turning diameter over bed 380 mm turning diameter over bed slide 210 turning length 1000 mm bed width 242 mm spindle passage 41 mm Cgslin Hiev D Rhne Dot spindle taper MK 5 number of spindle speeds 16 spindle turning speed range 35,5-1600 U/min face slide travel 210 mm upper head travel 100 quill stroke 140 mm diameter of quill 50 mm taper in tailstock-quill MK 3 longitudinal feeds: 0,04 - 0,65 mm face feeds 0,019-0,28 mm Lots of accessories Operating instructions available

Condition: good (used), Pinacho lathe Type: T6 Turning diameter bed: 370 mm Turning diameter bed max: 520 mm Turning diameter support: 220 mm Turning length: 1000 mm Spindle bore: 34 mm Diameter faceplate: 160 mm Cgolin Hemw Um Aji Det Speed: 2000 RPM Dimensions: 190x80x135 cm LxWxH

Condition: used, Year of construction: 1985, Weiler Praktikant 140 lathe, built in 1985, with three-jaw chuck and Multifix. The Z-axis guide is slightly worn in the front area. The machine is in good working order. Can be demonstrated live by arrangement. Colev N Awfoin Hi Dsgt

Condition: excellent (used), Year of construction: 1993, Functionality: fully functional, Lead and pull spindle lathe Weiler Intern 160 *Partially overhauled Item number: 04-03-218 Manufacturer: Weiler Delivery time on request Very good general condition Machine partially overhauled Delivery time: subject to prior sale upon request Cgjliohd Uuben Hi Djt Year of construction: approx. 1993 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kgDigital display: 3-axis digital display Sino *New* Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter over support: approx. Ø198mm Max. turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed ​​range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2 kW Automatic longitudinal & plan feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm Inch 80 – 2 Gg/” Diametrically - pitch thread 200 - 5 Dp module 0.2 - 4 Tailstock: MK3 Accesories: 3-axis digital display SINO *New* 3-jaw chuck 160mm *New* Quick-change holder size A + 1 insert Bed stop Work light *New* Coolant system *New* Complete documentation Emergency stop switch Various tension wrenches Machine feet Electric feed protection *New* Guide and pull spindle cover Drill chuck *Optional* Revolving tip *Optional* Collet device 386E *Optional* Collet set 386E *Optional* Additional quick-change holders *Optional* Further accessories on request Price and further technical data on request

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Coliev D Ip Nsn Hi Dsgt Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Condition: excellent (used), Year of construction: 1981, Functionality: fully functional, machine/vehicle number: 4/0009/07423DD, MACHINE SPECIFICATION Distance between centres 1000mm Centre height 165mm Swing Swing over bed 335mm Swing over cross slide 209mm Spindle Bored to pass 40mm dia Nose D1-4 Camlock Morse taper in nose N0 3 Width of bedways 231mm Travel Total travel of cross slide 209mm Total travel of top slide 95mm Total travel of tailstock barrel 146mm Speeds Spindle speeds (16) 22-1800rpm Spindle motor Threads 2.25Kw Whitworth threads (45) 2-72tpi Diametral threads (21) 8-44 Metric pitches (39) 0.2-14.0mm Module pitches (18) 0.3-3.5 Feeds Sliding feeds 0.001-0.0740 ipr/spindle Surfacing feeds 0.0005-0.020 ipr/spindle Tailstock Approx weight 800Kg Cgslin Hjv Imi Aji Det Machine in Metric execution   MACHINE EQUIPPED WITH Goodwin 2 axis DRO system 3 & 4 jaw chucks Faceplate Quick change toolpost and 3 off toolholders Dual metric/imperial reading dials fitted to top slide & cross slide Apron dial Bedstop Lighting Coolant system Chuck guard Rear splashguard

Condition: used, Year of construction: 1990, turning diameter over bed 360 mm centre height 180 mm centre distance 1100 mm spindle bore 46 mm number of spindle speeds 12 Stk spindle turning speed range 25 - 1600 U/min longitudinal feeds: 138/0,04-2,16 mm/U face feeds 138/0,02-1,08 mm/U cross slide - travel 240 mm upper slide-adjustment 140 mm tailstock quill taper MT MK4 Cslievzhdben Hi Dogt tailstock quill adjustment 130 mm

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, turning diameter over cross slide: 350 mm, spindle bore: 43 mm, turning diameter: 350 mm, turning diameter over bed slide: 195 mm, center height: 175 mm, turning length: 800 mm, quill stroke: 110 mm, three-jaw chuck diameter: 160 mm, L-shaped and drawbar lathe GDW CE, guides and mechanical parts in very good condition Cgslinov Syxxe Hi Djt With chuck safety shut-off and motor brake Weight 850 kg Coolant system Drill chuck, live center, multi-fix tool holder size B with 3 inserts Chuck safety shut-off Motor brake

Condition: used, Year of construction: 1986, Functionality: limited functionality, Weiler Commodor lathe, built around 1986, three-jaw chuck, Multifix. Machine is partially operational, digital display defective, switching shaft for switching on the speed must be adjusted. Condition OK, ready to demonstrate under power after consultation. Cgolin Hevnzg Aoi Dst

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 7V0221, We can also send a video by email! Bed length between centers: 1250 mm Cgslin Hjhgii Eoi Djt Center height: 195 mm Turning diameter over bed: 400 mm Turning diameter over cross slide: 246 mm Swing in gap: 585 mm Width in front of front plate: 16 mm Spindle speeds (16): 0-2500 rpm Spindle nose mounting (Camlock): D1-6 Spindle bore: 54 mm Spindle motor: 7.5 kW Approx. weight: 1800 kg Length x width x height: 2500 x 1100 x 1600 mm Machine equipped with: - Digital readout system 3-jaw chuck + 4-jaw chuck Bedstop Lighting Cooling system Toolbox Many tools, fixtures, inserts, live center, etc.

Condition: like new (used), Year of construction: 2001, operating hours: 10 h, Functionality: fully functional, machine/vehicle number: 3835, ZMM Metalik Type C8C Machine no. 3835, built in 2001 Max. Turning diameter above bed -> 320 mm Max. Turning diameter over support -> 175 mm Max. Turning diameter in pocket -> 440 mm Bed width -> 200 mm Center distance -> 750 mm Main spindle bore -> 32 mm Main spindle internal mounting -> MK 4, DIN 55027, gr. 5 Number of speeds -> 12 Speed range -> 85 - 2000 rpm Support cross travel -> 150 mm Tool slide travel -> 90 mm Number of feeds -> 48 Feed range, longitudinal -> 0.006 - 1.77 mm/rev Feed range, transverse -> 0.003 - 0.885 mm/rev Metric thread, 48 -> 0.1 - 28 mm/rev. Whitworth thread, 53 -> 75 - 2.5 G1" Modul thread, 19 -> 0.1 - 1.75 Mod Diam. Pitch, 19 -> 70 - 4 DP Diameter tailstock spindle -> 40 mm Pinole travel -> 100 mm Pinole take-up -> MK 3 Cgelinsv I S Nus Hi Det Power main motor -> 2.2 kW Weight net/gross, approx. -> 710 kg Machine dimensions, C8C 310 x 750 -> 1884 x 782 x 1274 mm Very good condition

Condition: good (used), Year of construction: 2000, Functionality: fully functional, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, center height: 165 mm, turning length: 750 mm, quill stroke: 110 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 22 rpm, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Weiler Condor AC stepless rotary machine Colin Hieruqzcj Degt

Condition: used, Year of construction: 1990, turning diameter over bed 360 mm centre height 180 mm centre distance 1000 mm spindle bore 46 mm Cslin Hievylkio Dogt number of spindle speeds 12 Stk spindle turning speed range 25 - 1600 U/min longitudinal feeds: 138/0,04-2,16 mm/U face feeds 138/0,02-1,08 mm/U cross slide - travel 240 mm upper slide-adjustment 140 mm tailstock quill taper MT MK4 tailstock quill adjustment 130 mm

Condition: used, Technical details: turning diameter over bed: 320 mm turning length: 800 mm centre distance: 800 mm centre height: 150 mm spindle bore of work spindle: 30 mm range of revolution per miute: 35 - 1500 / 16 step U/min range of feed in x - axis: 0,04 - 2,4 / 30 step m/min tailstock quill adjustment:: 125 mm tailstock taper MT: MK2 dimension machine xH: 1,7 x 0,8 x 1,5 m Equipment and other features: -3-jaw chuck Röhm 160mm -chuck guard -protection system WxH: 510x400mm -Multifix tool clamp (4 pieces) -Tip in tailstock -Upper slide swivels +/- 45°, maximum travel = 100mm Celiou Ixy Dsn Hi Dsgt -Cross slide travel = 300mm feed Pump for coolant device (without feed) *

Condition: used, Year of construction: 1980, Weiler Condor VS2 lathe with 3-axis Heidenhain digital display, built in 1980, four-jaw chuck, Multifix with 3 holders. Machine in very good, operational condition, comes from a training workshop. Ready to demonstrate with power on by arrangement. Colin Hevx Sw Hei Degt

Condition: new, Year of construction: 2025, CORMAK 360 is a new, improved model of the most popular metal lathe. Among other things, the tool holder cover, spindle bearing system, new digital readout have been improved. Suitable everywhere small scale turning has to be done. A NEW, IMPROVED MODEL !!! High-quality and reinforced spindle bearing system New cover system compliant with CE standards The latest model of digital axis reading Reinforced and modernized lathe base with drawers for tools and an extendable chip tray Machine characteristics Reinforced, ribbed surface of the lathe's bed provides maximum reduction of vibration, Additionally precisely ground, hardened bed Digital readout of the axis in standard equipment Equipped with a large spindle bore of 52 mm Also features high-quality and high-end spindle bearing system Efficient machining due to two automatic feeds and equipment with a roller and a draft bolt Hardened wheels in the spindle gear Adjustable overload clutch on pull shaft Feed choice lock: through a screw or a roller The possibility of machining the full range of threads without replacing the gear wheels The removable bridge enables the working of elements with an increased diameter Retractable chip tray and tool drawers for better and efficient work Technical data Swing over bed 360 mm Swing over cross slide 220 mm Swing over gap 490 mm Maximum turning length over gap 168 mm Bed width 187 mm Turning length in dead centres 970 mm Spindle tip D1-4 Spindle bore 52 mm Spindle speed 90–2000 rpm Number of spindle speeds 8 Longitudinal feed range 0.055–1.291 mm/turn Transverse feed range 0.014–0.345 mm/turn Maximum tool dimensions 16×16 mm Metric thread 0.4–7 mm Inch thread 4–60 T.P.I. Tailstock quill diameter 32 mm Tailstock quill tip MK3 Cslisiz S R Nsn Hi Dsgt Motor power 1.5 kW Pump power 0.1 kW Weight 570 kg Dimensions 1890×720×1500 mm Equipment Axes digital readout 200 mm 3-jaw lathe chuck 200 mm 4-jaw lathe chuck Drive plate Steady rest Follow rest Reduction sleeve Dead centre Cooling system Lighting Set of change gears Thread indicator/gauge Handling tools Lathe on a base User manual EC declaration of conformity Factory new machine, under warranty For more information you can visit our web page.

Condition: good (used), Year of construction: 1967, LZ-Lathe Fabr.WEIPERT TYPE:UD 500 e year 1967 Colin Hiju Rd H Is Dsgt with digital readout ,top support feed tool holder MULTIFIX size C ,Forkardt chuck 315 mm. Center height : 250 mm Center width : 1500 mm spindle bore : 65 mm Spindle speed : 14 -1400 rpm Machine is in good condition .

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 315 mm turning diameter over support: 200 mm turning length: 500 mm turning diameter over bed: 315 mm swing diameter over face slide: 200 mm center height measured in bed: 180 mm spindle passage: Ø 32 mm range of revolution per miute: 56...2.800 / nur only 6 step links-rechts U/min range of feed in x - axis: längs: 0,02..0,8 m/min Celin Hiou Ix Hqj Djgt range of feed in y - axis: plan: 0,01..0,4 m/min tailstock quill taper MT: MK 4 tailstock quill adjustment:: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,1x 1,1 x 1,4 m -Workpiece pick-up via collet chuck -travels longitudinal slide= 580mm and cross slide=170mm -incl. tooling device lathe support -incl. change gears -steady rest Ø 100mm -fourfold tool holder The machines functionality is limited ! 6 speeds are currently selectable! (224/1800 ; 280/2240; 355/2800 rpm.) i.D. *