Used center lathes 400-499mm turning diameter over bed for sale (217)

Condition: used, Year of construction: 1982, centre height ca. 150 mm centre distance 1300 mm vorhanden diameter ca 250 mm digital readout 1x make Heidenhain u. Werkzeug-Sc Bjdpfxjp Icp Us Agzect serial number 63-06

Condition: used, turning diameter over bed 370 mm turning diameter over slide rest 200 mm turning length 1000 mm centre height 185 mm Bodpfxjxfwcko Agzoct spindle bore 56 mm tailstock quill taper MT 4 turning speeds 50 - 2000 U/min power capacity 4,0 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,3 x 1,1 x 1,3 m Center lathe 200mm three-jaw chuck Size B Multifix tool post 3 Multifix tool holders Emergency stop device

Condition: excellent (used), Harrison V390 Vari Speed Gap Bed Lathe (2004) Model V390 Year 2004 Condition Used Swing Over Bed 400mm Distance Between Centres 1250mm Swing Over Cross Slide 246mm Height of Centres 195mm Bed Length between Centres 1250mm Swing over Bed 400mm Swing in Gap 585mm Bsdpfsxwkwxox Agzsct Swing over Cross Slide 246mm Spindle Bore 54mm Morse Taper in Nose Bush No. 4 MT

Condition: new, Year of construction: 2026, turning diameter over cross slide: 690 mm, spindle bore: 155 mm, turning diameter: 1,090 mm, turning diameter over bed slide: 1,000 mm, center height: 500 mm, center width: 700 mm, turning length: 6,000 mm, bed width: 700 mm, rotational speed (max.): 1,000 rpm, Equipment: rotational speed infinitely variable, Heavy-duty lathe with infinitely variable speed control in 4 ranges. Digital position indicator / digital measuring device with constant cutting speed control - High motor power of the main drive 30 kW in standard version (applicable in the range from 5 - 1000 rpm) - Rigid main spindle with 132 mm bore - Bed width 700 mm - Prismatic guide, rigid cross slide Accuracy according to DIN 8607 - Rigid main spindle: TUS 800 /100/1250 with 155 mm spindle bore, mounted in precision bearings Manufacture: FAG or SKF Spindle holder according to DIN 55027/15 - Hardened guideways 48 +/-2 HRC - Locked chuck guard (max. TUS 800 = 760 mm, TUS 1000 = 960 mm, TUS 1250 = 960 mm) Rear, continuous chip splash guard - Moving front chip guard - Jogging gear for main spindle - Closed feed box of rigid design with sliding wheel blocks on splined shafts - Central lubrication for bed slide and facing slide - Central lubrication for headstock and feed box - Feed rates, metric and inch threads without wheel change - Rapid traverse lengthwise, crosswise and in top support - Safety shutdown of the handwheel on the bed slide or the hand crank on the cross slide during rapid traverse movement - Feed direction change on the bed slide and also on the headstock - Quick-change tool holder model D1 Bedpfxsugwrgj Agzoct Scale ring on the bed slide and tailstock handwheel - Scaling on the tailstock quill 2-stage tailstock quill/ with gear ratio 1:1 and 1:4 - Electrically adjustable tailstock Support for lead and feed spindles from 2000 mm SW - CE and declaration of conformity

Condition: used, Year of construction: 1979, functionality: fully functional, turning diameter: 640 mm, center height: 320 mm, turning length: 2,000 mm, Leadscrew and feedshaft lathe VDF with digital readout, powered top slide, 3-axis feed with rapid traverse, 3-jaw chuck, faceplate, Multifix toolholder with 5 inserts. Bodpexz Edzjfx Agzoct

Condition: good (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 3251, turning diameter over cross slide: 230 mm, spindle bore: 45 mm, turning diameter: 440 mm, center height: 220 mm, turning length: 1,200 mm, total length: 2,600 mm, total width: 1,100 mm, total height: 1,700 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 26 rpm, metric thread diameter (max.): 112 mm, metric thread steps: 40, overall weight: 2,000 kg, three-jaw chuck diameter: 200 mm, This centre lathe is equipped with digital readout on two axes, a central lubrication system for the carriage, a complete cooling system, chuck guard, and meets the minimum safety requirements. Bcjdpsxxx Arjfx Agzot

Condition: used, Year of construction: 1990, gefült mit 43 Aufnahmen height 2.200 mm width 1.200 mm weight of the machine ca. 300 kg Bcsdpohc Rf Tjfx Agzst +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), functionality: fully functional, spindle bore: 68 mm, turning diameter: 520 mm, Pinacho lathe model S90 260 with 1600 mm between centers, swing over bed 520 mm, swing over gap 770 mm, swing over cross-slide 325 mm, spindle bore 68 mm, 7.5 HP motor. Quick-change toolpost, with fixed steady rest, overall in very good condition. Bjdoxytppspfx Agzect

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm Bsdpfsxp Rzbex Agzjct turning length 1000 mm centre height 200 mm centre distance 1000 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 1,8 t dimensions of the machine ca. 2,85 x 1,4 x 1,9 m voltage 400 V With chuck, Multifix toolholder and digital readout.

Condition: good (used), L+Z lathe ERNAULT-SOMUA Cholet 435 Bjdpfxsxy Uave Agzoct

Condition: new, Year of construction: 2025, – Distance between centers: 1000 mm – Swing diameter over bed: 410 mm – Swing diameter over gap: 580 mm – Swing diameter over cross slide: 255 mm – Spindle bore: 52 mm – 45/1800 rpm – Longitudinal and transverse feed – Digital readout – Brake – Coolant system – Multifix with 4 tool holders – Lighting – Safety guard Bcsdpow S Ikmofx Agzot – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V

Condition: new, Year of construction: 2025, CORMAK 400 metal lathes is a new, improved version of the popular metal processing lathes. Among other things, the tool holder cover, spindle bearing system, new digital readout have been improved. They are suitable for production plants, workshops and tool shops. They are perfect for unit and small lot production. NEW, IMPROVED MODEL !!! high-quality and reinforced spindle bearing system new guards system compliant with CE standards the latest model of digital axis reading reinforced and modernized lathe base with drawers for tools and an extendable chip tray Characteristics of the machine REINFORCED, RIBBED SURFACE OF THE LATHE'S BED PROVIDES MAXIMUM REDUCTION OF VIBRATION, ADDITIONALLY PRECISE GRINDED, HARDENED BED DIGITAL READOUT OF THE AXIS IN STANDARD EQUIPMENT LARGE SPINDLE BORE PROVIDES OPTIMUM PERFORMANCE 52 mm THE APPROPRIATE BED WIDTH ENSURES STABLE AND PRECISE WORKING CONDITIONS MACHINE EQUIPPED WITH HIGH-QUALITY AND HARDENED SPINDLE BEARING SYSTEM EFFICIENT MACHINING THANKS TO TWO AUTOMATIC FEEDS AND EQUIPMENT WITH A ROLLER AND A DRAFT BOLT HARDENED WHEELS IN THE SPINDLE GEAR ADJUSTABLE CLUTCH OVERLOADS ON THE PULL SHAFT POSSIBILITY TO MACHINE THE FULL RANGE OF THREADS WITHOUT REPLACING THE WHEELS IN THE GUITAR FEED CHOICE LOCK: THROUGH SCREW OR SHAFT THE REMOVABLE BRIDGE ENABLES THE WORKING OF ELEMENTS WITH AN INCREASED DIAMETER RETRACTABLE CHIP DRAWER AND TOOL DRAWERS FOR BETTER AND EFFICIENT WORK Technical data MAXIMUM TURNING DIAMETER 400 mm MAXIMUM TURNING DIAMETER OVER THE BED 250 mm MAXIMUM TURNING DIAMETER IN THE SELECTION OF THE BRIDGE 520 mm TURNING LENGTH IN DEAD CENTRES 1000 mm BED WIDTH 218 mm SPINDLE END CAMLOCK D5 SPINDLE CONE MK6 SPINDLE BORE 52 mm SPINDLE ROTATION RANGE 65-1810 rpm SPINDLE SPEED NUMBER 16 ranges RANGE OF LONGITUDINAL FEED (40) 0,053 - 1,291 mm RANGE OF TRANSVERSE FEED (40) 0,011-0,276 mm THE MAXIMUM DIMENSION OF THE TOOL 20 mm x 20 mm Bcjdpfxjiz Tczs Agzot METRIC THREAD 0,4-7 mm INCH THREAD 4-60 T.P.I. MODULAR THREAD (22) 0,4-3 mm THREAD D. P. (28) 8-84 D. P. TAILSTOCK QUILL DIAMETER 50 mm TAILSTOCK QUILL STROKE 110 mm TAILSTOCK TAPER MT4 ENGINE POWER 2,2 kW PUMP POWER 0,1 kW WEIGHT 640 kg DIMENSIONS 2000x820x1650 mm EQUIPMENT digital readout steady rest follow rest 200 mm 3-jaw chuck 200 mm 4-jaw chuck face plate 280 mm dead center MK4 x 2 reduction sleeve MK6/MK4 keys Factory new machine, under warranty For more information you can visit our web page.

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 215 mm Center width: 760 mm Bodpou T E Ehefx Agzsct Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 7.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 185, turning diameter over cross slide: 800 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning diameter over bed slide: 1,000 mm, turning length: 2,000 mm, faceplate diameter: 900 mm, Potisje lathe PA - 50 - DC. Excellent condition. Steady and following rests included, along with face plate. Cone attachment on the lathe. Bcedpfx Aoww Igmsgzst

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 460 mm turning diameter over support: 388 mm turning length: 1016 mm centre distance: 1016 mm center height measured in bed: 230 mm turning dia. in gap: 640 mm spindle bore of work spindle: 52 mm range of revolution per miute: 30 - 2000 / 12 step U/min feeds:: längs: 0,032 - 0,898 mm/U feeds:: plan: 0,016 - 0,449 mm/U tailstock quill taper MT: 4 tailstock quill adjustment:: 120 mm total power requirement: 3,75 kW weight of the machine ca.: 1,6 t dimension machine xH: 2,1 x 1,1 x 1,5 m Switchable gearbox Quantum 3-way length measuring system Top slide adjustment +/-90° Multifix quick-change steel holder 3-jaw chuck Ø 200mm rotating center in tailstock Threads: Inch thread; Metric thread; Trapezoidal thread; Module thread Accessories: Bedsu Ixzbjpfx Agzect Change gears, machine feet, 1x fixed quill tip *

Condition: ready for operation (used), Year of construction: 2008, turning diameter over cross slide: 420 mm, spindle bore: 106 mm, turning diameter over bed slide: 650 mm, turning diameter over top slide: 420 mm, turning length: 2,000 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, total length: 1,900 mm, total width: 2,100 mm, total height: 1,900 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 1 rpm, overall weight: 5,100 kg, three-jaw chuck diameter: 650 mm, Equipment: rotational speed infinitely variable, The DMT Kern CD650 lathe is suitable for both precision operations and heavy-duty machining. It is ideally suited for small batch and single-piece production. Additional information: Weight: 5,100 kg Dimensions: Machine: 1.9 m + distance between centers x 2.1 m x 1.9 m (LxWxH) Control cabinet: 1.2 x 0.5 x 1.6 m (LxWxH) Accessories & options: C-axis with drilling, milling, and engraving cycles, including free ICP input Ethernet and USB interface for network connectivity Bcodpfsw A Iu Ijx Agzjt Chip conveyor Original documentation Fixed and traveling steady rest Self-centering 3-jaw chuck Ø400 mm Bdoc Rx Trsw A Iu Iofvsg Independent 4-jaw chuck Ø600 mm Faceplate/claw plate Ø650 mm Various internal/external jaws Fixed and rotating centers Approx. 30 Multifix toolholders, type C Drill chuck with MK5 mount

Condition: new, Center length ----- 1000 mm Center height ----- 230 mm Turning diameter ----- 460 mm Passage of main spindle ----- 58 mm Bed width ----- 300 mm Bcsdpfxjk Iug Ts Agzet Spindle speed ----- 25-2000 rpm Motor ----- 5.5 KW Weight ----- 1750 kg INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOB2 with 4 attachments * Self-centering 3 chuck 250 mm * Independent 4 chuck 320 mm * chuck 350 mm * Fixed and moving grips * LED work light and cooling system * Electric brake (CE) * Foot brake * Box with various tools

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: RLX10110, MACHINE SPECIFICATION Height of centres 240mm Distance between centres 1250mm Maximum cutting length 1080mm Swing over bed 480mm Swing over cross slide 257mm Swing in gap 700mm Gap width from faceplate 170mm Cross slide travel 230mm Spindle bore 80mm Bodpfoxt E Nnox Agzect Spindle nose Camlock D1-8 Spindle speeds 25 to 2500rpm Main motor 7.5kW Tailstock quill travel 160mm Tailstock quill taper No. 5 MT Approximate weight 2950Kg Dimensions W x D x H 2600mm x 1460mm x 1810mm MACHINE EQUIPPED WITH Prototrak RLX CNC control TRAKing Auxiliary output 3 jaw chuck Quick change toolpost and toolholders Enclosed guarding Coolant system Lighting

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Tip height: 215 mm Center width: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Bodpfscir Ansx Agzoct Equipment including Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, Year of construction: 2016, Technical details: turning diameter over bed: 402 mm turning dia. over face-slide: 245 mm turning length: 1000 mm centre distance: 1000 mm centre height: 200 mm swing diameter: in Kröpfung: 560 mm throat: Breite: 120 mm revolution per minute: 40 - 345 / 345 - 1015 / 1015 - 2800 U/min feed: längs: 0,05 - 0,752 + quer: 0,025 - 0,376 mm/U spindle diameter: Ø 42 mm tailstock taper ISO: MK4 tailstock quill stroke: 180 mm total power requirement: 4,1 kW Weight approx.: 1,2 t dimension machine xH: 2,4 x 1,0 x 1,7 m Bsdpevav Sdefx Agzect Die Drehmaschine verfügt über keinen Eilgang. Positionierung über 2-Achsen Anzeige über Pinacho Lathe Controller Multifix-Stahlhalter mit Drehmeißel Kühlmittelanlage Fußtaster Gewindeschneiden möglich (metrisch, Whitworth, Modul, Pitch) *

Condition: new, Center length ----- 1500 mm Center height ----- 230 mm Spindle diameter ----- 460 mm Bedpfx Agega Tv Eezsct Main spindle passage ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25-2000 rpm Motor ----- 5.5 KW Weight ----- 2220 kg INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOB2 with 4 tines * 3 Chuck 250 mm * 4 Chuck 320 mm * 350 mm clamping plate * Fixed and moving glasses * LED working light and cooling system * Electric brake * Foot brake * Box with various tools

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 7.5 kW Spindle speed range: 20-2000 mm Bcsdpfx Agju T Hiuszjt Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, Year of construction: 1955, Technical details: turning diameter over bed: 420 mm turning diameter over support: 240 mm turning length: 1100 mm turning dia. in gap: 600 mm range of revolution per miute: 24 - 900 / 8 step U/min spindle bore: 41 mm range of feed in x - axis: 0,0120 - 0,1000 mm/U range of feed in y - axis: 0,0062 - 0,0302 mm/U tailstock quill taper MT: 3 tailstock quill adjustment: 220 mm total power requirement: ca. 4,0 (ohne Gewähr) kW weight of the machine ca.: 1,2 t dimension machine xH: 2,3 x 0,9 x 1,3 m Equipment: 3-jaw chuck Ø 200mm Tool holder 4-way, swivelling 30° right/left T-slot for copying device Bsdpfxsu Ix D As Agzect Driving disc *

Condition: used, Year of construction: 1970, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 1000 mm center height measured in bed: 250 mm centre distance: 1000 mm revolution per minute: 18...1800 / 21 step U/min spindle bore of work spindle: 56 mm Bsdevvrpkjpfx Agzect tailstock quill adjustment:: 180 mm longitudinal feeds:: 0,08 - 3,26 mm/U cross feed: 0,04 - 1,63 mm/U Rapid feed X axis: 4,2 m/min. total power requirement: 7,5 kW weight of the machine ca.: 2,9 t dimension machine xH: 2,6 x 1,1 x 1,3 m 4-jaw chuckØ 250mm with internal jaws live center in tailstock 4-fold quick-clamping tool holder coolant system Accessories: various reduction sleeves MK3-MK5-MK4 revolving tip "Clamping heart" 3-jaw chuck Ø 250mm with inner jaws The machine does not comply with APR (accident preventing regulations) *

Condition: used, Year of construction: 2015, Technical details: turning diameter over bed: 420 mm Bsdpjvaxi Esfx Agzsct turning diameter over support: 255 mm turning length: 1000 mm turning dia. in gap: 580 mm centre height: 205 mm spindle bore of work spindle: 52 mm range of revolution per miute: 30 - 550 / 550 - 3000 (FU gesteuert) / 2 step U/min feed:: längs: 0,05 - 1,7 mm/U feed:: plan: 0,025 - 0,85 mm/U tailstock quill taper MT: 4 tailstock quill adjustment:: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,5 t dimension machine xH: 2,1 x 1,1 x 1,5 m Thread cutting possible, e.g. metric thread and inch thread Infinitely variable speed control 3-axis position indicator 3-jaw chuck Ø 200mm Multifix size B quick-change tool holder *