Used Center lathes 400-499mm turning diameter over bed for sale (208)

Condition: excellent (used), Tip height 175 mm tip width 800 mm Spindle bore 46 mm Spindle holder DIN 55022/5 Tailstock mount Cgshxyu Req Ixytsbst MK 3 Speed range 31.5 - 2500 rpm Longitudinal feed 0.051 - 1.034 mm/rev Face feed 0.025 - 0.517 mm/rev Machine weight 1200 kg Machine dimensions approx. 1915 x 985 x 1355 mm

Condition: good (used), turning diameter over cross slide: 255 mm, spindle bore: 56 mm, turning diameter over bed slide: 430 mm, turning length: 1,000 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 19 rpm, power: 7.5 kW (10.20 HP), Centre distance: 1.000 mm Swing over bed: 430 mm Swing over cross slide: 255 mm Spindle speeds: 19 - 2.000 RPM Spindle bore: 56 mm Featured with: - Various Multifix toolholders Cshxyuetx Tuwj Rbogt - Coolingpomp Country of origin: Germany Motor power: 7,5 kW Machine LxWxH: 360 x 103 x 130 cm Machine weight: 1800 kg

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: X2S190, SPECIFICATION Distance between centres 1250mm Floor to spindle centres 1086MM Swing over bed (saddle wings) 400mm Swing over cross slide 246mm Swing in gap 858mm Gap width from faceplate 165mm Spindle bore 55mm Spindle nose Camlock D1-6 Taper in nose bush No. 4 MT Spindle speeds: Low range 1-297rpm Medium range 1-861rpm High range 1-2700rpm Tailstock quill travel 140mm Tailstock diameter 73mm Tailstock taper No. 5 MT MACHINE EQUIPPED WITH Fanuc 21iTB CNC Control Operation modes: manual, sequential, AlphaLink and ISO Cgehxjwcz Tqoyu Rbst 3 jaw chuck Parat toolpost Lighting Coolant system Enclosed guarding Manual

Condition: used, Functionality: fully functional, CNC Bed-Type Milling Machine Manufacturer: Fritz Heckert Type: FKrSRS Control: Heidenhain 426 Table length: 1600 mm (length 3650 x width 2980 x 3620 mm) Clamping surface: 500 x 1600 mm (width) Clamping slots: 6 Upper width: 18 Center-to-center distance: 80 mm Maximum workpiece weight: 2000 kg Adjustment travel: Longitudinal X-axis: 1210 mm Cohxov U A Uueyu Rbogt Transverse Y-axis: 515 mm Vertical Z-axis: 575 mm Rear edge of clamping table to column sliding surface: 245 - 760 mm Front edge of milling spindle to table surface: 105 - 680 mm Center of milling spindle to column sliding surface: 775 mm Number of milling spindles: 6 Tool holder: SK 50 Diameter of front milling spindle bearing 100 mm Maximum torque 210 kpm Largest cutterhead diameter for machining cast iron/steel/aluminum 200 / 200 / 250 mm Speeds 18 Range 28 - 1400 rpm Increment 1.25 Full-groove speed 90 rpm Feeds Adjustable in the x / y / z axes in increments of 1 mm/min. Set via F command 10 - 4000 mm/min. Rapid traverse 5000 m/min. Milling spindle drive power 18.5 kW Torque per feed spindle 49 Nm Operating voltage 380 V Frequency 50 Hz Total power consumption 39 kW

Condition: good (used), Year of construction: 1980, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe Cgehxyu Rjtvhryebst -Manufacturer: VDF Heidenreich Harbeck, lead screw lathe type V3 -Turning length: 1700 mm -Turning Ø over bed: 500 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 57 mm -Spindle speeds: 19 - 2000 rpm -Key bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Bezel: 150 mm -Drive: 7.5 kW -Accessories: keyless collet, tool holder, tools see photos -Dimensions: 1440/3370/H1515 mm -Weight: 2510 kg

Condition: used, Year of construction: 1999, Functionality: fully functional, KERN envelope inserter Model: 2500 4 x Deep loading insert stations Advanced OMR (Optical Mark Recognition) and 2D barcode product scanning. This machine can handle multiple inserts and place on demand. It is very versatile and can handle personalised brochures or supplementary documents like bills and associated mailings. The Flexible feed stations ensure and enable smooth handling of primary documents and any additional inserts. The Kern machine are regarded as the industry leader for complex mailing problems at extremely high speed with unmatched accuracy. Age: 1999 Cjhxjwctw Ioyu Rbogt Price: Euro 11,500 dismantled by Kern specialist and loaded to your transport

Condition: ready for operation (used), Lathe Fabr Takisava Type TAL 510 with lathe chuck + quick-change holder + center punch Cehxyuovyuuqo Rbegt

Condition: good (used), Year of construction: 2011, Center high 230 mm Between centers 1500 mm Swing dia over bed 465 mm Swing dia over cross slide 270 mm Swing dia in bridge 690 mm Length of bridge 240 mm Spindle hole 58 mm Spindle face CAMLOCK D1-6 Spindle taper MT 6 Speed range 25 – 2000 rpm (12 ranges) Tailstock taper MT 4 Pinole travel 128 mm Cgshxyu Rowb Dm Dsbjt Spindle power 5,5 kW Weight 1720 kgs Dimensions LxWxH = 2700 x 1080 x 1370 mm Accessories - SINO 3 axis D.R.O. - 3 jaws chuck D250 mm - Tailstock - Coolant unit - 4-fold toolholder

Condition: used, Functionality: fully functional, machine/vehicle number: 6/0008/08085, MACHINE SPECIFICATION Cont’d Diametral threads (21) 8 - 44 DP Metric pitches (39) 0.2 – 14mm Module pitches (18) 0.3 – 3.5 mod Sliding feeds, per rev. of spindle 0.0015 – 0.040” Surfacing feeds, per rev. of spindle 0.00075 – 0.020” Machine in Metric execution MACHINE EQUIPPED WITH Sino 2 axis DRO system 3 Jaw chuck Quick change toolpost Chuck guard Coolant System Lighting Cgohswczcfexyu Rbst Rear splashguard

Condition: good (used), turning diameter over cross slide: 267 mm, turning diameter: 432 mm, center width: 1,500 mm, 3-jaw chuck diameter 250mm tool holder device tail stock steady rest coolant device Technische Daten / technical details: Spitzenweite / center to center 1500 mm Dreh-Ø über Bett / turning diameter over bed 432 mm Cjhxetq Exroyu Rbegt Dreh-Ø über Schlitten / turning diameter over sledge 267 mm Dreh-Ø über Kröpfung/ turning diameter in the gap 710 mm Spindelbohrung / spindle hole 76 mm Drehzahlbereich / spindle speed 20-1600 UpM /rpm Antriebsleistung / drive capacity 9,3 kW Gewicht der Maschine ca. / weight ca. 2310 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Heavy lathe, lathe, lathe, lead and pull screw lathe, lead and pull screw lathe -Manufacturer: VDF Heidenreich Harbeck, lead and pull spindle lathe type V3 -Turning length: 1600 mm -Swivel Ø over bed: 530 mm -Turning Ø over support: 330 mm -Spindle bore: Ø 62 mm Cgshxsrl T Uwoyu Rbjt -Spindle speeds: 14 - 710 rpm see photo -Three-jaw chuck: Röhm Ø 315 mm -Tailstock mount: MK5 -Accessories: tool holder/tools see photos -Dimensions: 1100/3460/H1250 mm -Weight: 2650kg

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1000 mm centre height 200 mm centre distance 1000 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 1,8 t Cehxyujv Ank Ds Rbogt dimensions of the machine ca. 2,85 x 1,4 x 1,9 m voltage 400 V main drive 5,8 KVA With chuck, Multifix toolholder and digital readout.

Condition: good (used), Kern lathe D 23 V with Forkard lathe chuck Multifix B digital display Cohxyu Revl Ig Djbsgt

Condition: new, turning diameter 330 mm turning length 830 mm swing diameter over bed slide 196 mm Swingdiameter in the bed bridge 170 centre height 165 mm centre distance 830 mm Turning length in the bed bridge 430 reus 16 (70-2000) U/min tail stock MK 3 quill stroke 110 mm diameter of quill 32 mm spindle taper DIN ISO 702-2 Nr. 4 spindle bore 38 mm spindle cone MK 5 feed längs 32 / 0,052 1,392 m/min feed plan 3,2 / 0,014 0,38 m/min weight of the machine ca. 0,52 t dimensions of the machine ca. 1,7 x 0,75 x 1,6 m Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide Cjhxyuek Egrwo Rbjgt - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spindle running in an oil bath - Gear wheels run smoothly, hardened and ground - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Handwheels decoupled and tested according to EN 23125 - Safety handwheels with push-out function in the X and Z axes - Two-channel right-left switch tested according to EN 23125 - DC 24 volt electrical system with two-channel safety circuit according to EN 23125 - Lathe chuck protection tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - Lockable main switch - Clockwise / counterclockwise rotation on the bed slide switchable - Lead screw cover - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.02 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground - Machine base with tool compartment on the right-hand side (left-hand side with 3 Bezels (no compartments) - Pull-out chip tray with guide rails - Emergency stop device with foot actuation - LED machine lamp integrated in the chip guard Digital position indicator DPA 21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed steady rest passage Ø 6 - Ø 50 mm - Moving steady rest passage Ø 8 - Ø 30 mm - LED machine light - Reduction sleeve MK 5 / MK 3 - Two fixed centering points MK 3 - Quadruple steel holder 16 mm - Change gears set - machine base - Initial machine filling with quality oil - operating tool Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 304372, MACHINE SPECIFICATION Centres Height 167mm Admits between 635mm Swing Over bed 330mm Over cross slide 210mm In gap diameter 480mm Length 115mm Spindle Bored to pass 38mm diameter Nose No. 4 D1 Camlock Speeds Number 16 Range 40 to 2500rpm Motor 1500rpm at 50Hz 2.2kW Cross Slide Width 140mm Travel 190mm MACHINE SPECIFICATION Cont’d Top Slide Width 82mm Travel 92mm Tailstock Quill – diameter 42mm – travel 110mm – morse taper No. 3 Set over +/-12mm Approx weight 635kg Machine in Metric execution Cgjhswcy S Eexyu Rbot MACHINE EQUIPPED WITH Acu-Rite 2 axis Digital Readout System 3 & 4 Jaw chucks Quick change toolpost and 2-off toolholders Lighting Chuck guard Coolant system Rear splashguard

Condition: new, Year of construction: 2022, operating hours: 3 h, Functionality: fully functional, Commodor 230 VCD Lathe, NEW CONDITION The Commodor series has been the benchmark for long-term precision for decades. These field-proven, high-quality, and powerful production lathes are designed for universal use in industry, toolmaking, skilled trades, and education. Features: Center distance 1000 mm Center height 230 mm Automatic handwheel release Lead and feed screw covers Holding brake Toolmaking precision according to DIN 8605 Frequency converter and speed potentiometer for continuous speed control High drive power on the main spindle Large thread cutting range Digital speed display Convenient operation LED machine light WORKING AREA Center height 230 mm Swing over bed 475 mm Swing over cross slide 270 mm Center distance 1000 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Gr. 6 Spindle bore 56 mm Spindle diameter in front bearing 90 mm MAIN DRIVE Drive power 60%/100% duty cycle – / 11 kW Speed range 25 – 2,000 rpm Number of speeds: continuously variable FEED RANGE Number 320 Longitudinal 0.026 – 7.4 mm/rev Cross 0.013 – 3.7 mm/rev THREADING RANGE Metric threads 0.3 – 80 mm TAILSTOCK Quill diameter 70 mm Quill stroke 150 mm Internal taper DIN 228 MK 4 ACCEPTANCE ACCURACY DIN 8605 The WEILER screen display for the VCD series with constant cutting speed (V-constant) 3-axis display for Bed, cross, and top slides Direct speed input and display Constant cutting speed Freely selectable speed limit (lockable via key switch) Oriented spindle stop Tool technology memory for 99 tools Power display in percent (graphic) and kW Axis display deactivation via key switch (for training purposes) Cgohev Tv R Hsxyu Rbst Accessories RÖHM three-jaw chuck 250mm RÖHM three-jaw lathe chuck DURO-M, DIN 55027 Fixed steady rests 5 x Multifix size B Movable chip guards Numerical position indicators About the machine: Offered is a Weiler Commodor 230 VCD lathe in new condition. The Weiler has 3 spindle hours. The machine is CE-compliant. Take advantage of the opportunity to view and try out this machine on-site under power.

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 6414.21, turning diameter over cross slide: 420 mm, spindle bore: 64 mm, turning diameter: 420 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 210 mm, center height: 210 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 140 mm, quill diameter: 60 mm, total length: 2,150 mm, total width: 1,150 mm, total height: 1,700 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 1 rpm, Equipment: rotational speed infinitely variable, The machine is faultless and has had no previous repairs, with very low operating hours. Cohxswcdhdsyu Rbsgt The lathe can be operated both conventionally and via servo drives. The control system allows programming via DIN commands, making it ideal for small batches and training. Sale due to misjudgment of the required technology: we have a growing need for a CAD/CAM-programmable cycle lathe. Please refer to the photos/description for the type, model, year of manufacture, and operating hours. Price: €50,000 (negotiable) based on a new price of approximately €76,000. Transport of the machine is not included in the price and is subject to negotiation. The center shown in most photos is not included in the offer; it is listed in the accessories list! Extensive accessories are listed in the Word document. The machine is available for immediate sale.

Condition: used, Year of construction: 1970, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 1000 mm center height measured in bed: 250 mm centre distance: 1000 mm revolution per minute: 18...1800 / 21 step U/min spindle bore of work spindle: 56 mm tailstock quill adjustment:: 180 mm longitudinal feeds:: 0,08 - 3,26 mm/U cross feed: 0,04 - 1,63 mm/U Rapid feed X axis: 4,2 m/min. total power requirement: 7,5 kW weight of the machine ca.: 2,9 t dimension machine xH: 2,6 x 1,1 x 1,3 m Cgshjvvrpkjxyu Rbet 4-jaw chuckØ 250mm with internal jaws live center in tailstock 4-fold quick-clamping tool holder coolant system Accessories: various reduction sleeves MK3-MK5-MK4 revolving tip "Clamping heart" 3-jaw chuck Ø 250mm with inner jaws The machine does not comply with APR (accident preventing regulations) *

Condition: refurbished (used), Year of construction: 2021, operating hours: 50 h, Functionality: fully functional, Meuser lathe M 1 L 230 x 1000 Year 2021 from Meuser new Built-up Turning length 1000 mm Machine length 2380 mm Center height 230 mm Digital readout HeidenhainND 5023 Multifix B Lathe chuck 3 jaws Mint condition with documentation Cehxotuqdusyu Rbjgt

Condition: used, Year of construction: 1999, STANKO Samat 400M lathe, No. 9990, built in 1999, center distance approx. 700 mm Cgehxyu Rewczdisbot

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 304397, MACHINE SPECIFICATION Centres Height 167mm Admits between 635mm Swing Over bed 330mm Over cross slide 210mm In gap diameter 480mm Length 115mm Spindle Bored to pass 38mm diameter Nose No. 4 D1 Camlock Speeds Number 16 Range 40 to 2500rpm Cshowcyy Nexyu Rbegt Motor 1500rpm at 50Hz 2.2kW Cross Slide Width 140mm Travel 190mm MACHINE SPECIFICATION Cont’d Top Slide Width 82mm Travel 92mm Tailstock Quill – diameter 42mm – travel 110mm – morse taper No. 3 Set over +/-12mm Approx weight 635kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis Digital Readout System 3 & 4 Jaw chucks Quick change toolpost and 3-off toolholders Lighting Chuck guard Coolant system Rear splashguard

Condition: new, ELMAG Universal lathe INDIVIDUAL 1000/200 - Vario incl. RÖHM lathe chuck incl. 3-axis position indicator incl. quick-change steel holder 'Set', Multifix system Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out Individual 1000/200 The Individual is a compact center lathe for the individualist and is ideally suited for training and maintenance. With infinitely variable speed control and a digital speed display, the machine always allows the cutting speed to be precisely matched to the material. Thanks to its precision bearings and 850 kg weight, the machine runs particularly smoothly and is designed for demanding continuous operation. It enables the production of turned sizes using slides up to Ø 200 x 1,000 mm. The INDIVIDUAL 1000/200 is powered by a 2,400 watt motor, has infinitely variable speed adjustment from 45 - 2,500 rpm and 48 longitudinal and cross feeds. ADVANTAGES Coolant tank and pump integrated in the machine base Stepless speed adjustment incl. digital display LED lighting Automatic central lubrication Digital position indicator for 3 axes with color display Electromagnetic motor brake Large protective cover for a clean working environment TECHNICAL DATA Center width 1000 mm Center height 200 mm Turning diameter over bed 400 mm Turning diameter over slide 260 mm Turning diameter without bridge 560 mm Bridge length 235 mm Cross slide travel 175 mm Top slide travel 95 mm Turning tool cross-section, max. 25x25 mm Lathe chuck holder D1 - 5 Spindle holder (turning spindle) MK 5 mm Spindle bore 51 mm Speed 45 - 2500 rpm Infinitely variable speed steps Longitudinal feeds 0.043 - 0.653 mm/rev Transverse feeds 0.027 - 0.413 mm/rev Metric modular thread 0.4 - 7 mm Inch thread, threads G 4 - 56 G/' Inch modular thread, threads G 4 - 56 G/' Lead screw pitch 4 mm Lead screw diameter 22 mm Quill holder MK 3 Quill diameter 50 mm Quill travel 120 mm Cgehxyu Rjt Ef Hqobst Motor power 2400 W Coolant pump 40 W Mains connection 400/50 V/Hz Length (total) 2114 mm Width (total) 998 mm Height (total) 1700 mm Weight 850 kg

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 304373, MACHINE SPECIFICATION Centres Height 167mm Admits between 635mm Swing Over bed 330mm Over cross slide 210mm In gap diameter 480mm Length 115mm Cshxyu Rswcyumobegt Spindle Bored to pass 38mm diameter Nose No. 4 D1 Camlock Speeds Number 16 Range 40 to 2500rpm Motor 1500rpm at 50Hz 2.2kW Cross Slide Width 140mm Travel 190mm MACHINE SPECIFICATION Cont’d Top Slide Width 82mm Travel 92mm Tailstock Quill – diameter 42mm – travel 110mm – morse taper No. 3 Set over +/-12mm Approx weight 635kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis Digital Readout System 3 & 4 Jaw chucks Quick change toolpost and 2-off toolholders Lighting Chuck guard Coolant system Rear splashguard

Condition: new, ELMAG universal lathe PREMIUM CU 630 RD - Vario center distance 1000mm incl. RÖHM lathe chuck Performance data and holders: - Turning Ø 325-1,320 mm, without bridge 440-1,500 mm - Turning size via slide Ø 190-940 x 6,000 mm - Drive motor: 2,200-22,000 W, 400 V, high torque - Lathe chuck holder: DIN 55027 - Quill holder: MK 3 - MK 6 Standard equipment: - RÖHM three-jaw lathe chuck - Quick-change steel holder set, 5-piece - Halogen machine lamp - Emergency stop button / zero voltage release - Chuck guard with safety switch - Tool slide with splash guard - Underframe / chip tray / splash guard - Tool set / operating instructions / CE Standards PREMIUM CU series: - Heavy gray cast iron machine bed, good vibration damping - Dismountable bridge - Prismatic guides Cohxyu Rjt Hhbyebogt - Hardened and precision-ground turning spindle, high concentricity, adjustable precision bearings - Smooth-running rotary spindle and feed gear with oil bath - Gear wheels made of chrome-nickel steel, hardened and precision-ground - Feed reversal circuit - Covered trapezoidal thread lead screw, hardened, precision ground - Tool slide with lock nut - Precise slide guides, adjustable - Solid tailstock with taper turning adjustment - Lathe accuracy according to DIN Special accessories: - SINO digital position indicator for 3 axes - Insert turning tool set 25 x 25 mm, 7-piece - 7-piece insert set, 25 x 25 mm - Grooving tool set incl. plates, 6 pieces - Machine shoe Ø 160 mm, 6 pcs. on request: - Steady rest - Steady rest - Steady rest with ball bearing guide - Faceplate - 4-jaw faceplate chuck ADVANTAGES Rotary spindle and feed gearbox with quick-change elements Feed reversal Sliding protective cover Gear plate Halogen lamp Coolant pump Emergency stop button Rapid traverse motor Longitudinal slide TECHNICAL DATA Center width 2000 mm Center height 315 mm Turning diameter over bed 630 mm Turning diameter over carriage 430 mm Turning diameter without bridge 830 mm Machine bed width 400 mm Cross slide travel 315 mm Top slide travel 130 mm Turning tool cross-section, max. 32x32 mm Lathe chuck holder (DIN 55027) no. 11 Spindle holder (turning spindle) 120 mm Spindle bore 103 mm Speed range 1, infinitely variable 16 - 63 rpm Speed range 2, infinitely variable 63 - 250 rpm Speed range 3, infinitely variable 315 - 1250 rpm Longitudinal feeds (120) 0.04 - 12 mm/rev Transverse feeds (120) 0.02 - 6 mm/rev Metric thread dimension (64) 0.5 - 120 mm Metric modular thread (64) 0.125 - 30 mm Inch thread, threads G (64) 60 - 1/4 G/' Inch modular thread, threads G (64) 240 - 1 G/' Quill holder MK 5 Quill diameter 90 mm Quill stroke 230 mm Motor power 11000 W Mains connection 400/50 V/Hz Length (total) 3600 mm Height (total) 1400 mm Weight 3310 kg

Condition: new, ELMAG universal lathe PREMIUM CU 325 RD - Vario center distance 1000mm incl. RÖHM lathe chuck Performance data and holders: - Turning Ø 325-1,320 mm, without bridge 440-1,500 mm - Turning size via slide Ø 190-940 x 6,000 mm - Drive motor: 2,200-22,000 W, 400 V, high torque - Lathe chuck holder: DIN 55027 - Quill holder: MK 3 - MK 6 Standard equipment: - RÖHM three-jaw lathe chuck Ø 160 mm - Quick-change steel holder set, 5-piece Cgohst Hg Sksxyu Rbjt - Halogen machine lamp - Emergency stop button / zero voltage release - Lathe chuck guard with safety switch - Tool slide with splash guard - Underframe / chip tray / splash guard - Tool set / operating instructions / CE Standards PREMIUM CU series: - Heavy gray cast iron machine bed, good vibration damping - Dismountable bridge - Prismatic guides - Hardened and precision-ground turning spindle, high concentricity, adjustable precision bearings - Smooth-running rotary spindle and feed gear with oil bath - Gear wheels made of chrome-nickel steel, hardened and precision-ground - Feed reversal circuit - Covered trapezoidal thread lead screw, hardened, precision ground - Tool slide with lock nut - Precise slide guides, adjustable - Solid tailstock with taper turning adjustment - Lathe accuracy according to DIN Special accessories: - SINO digital position indicator for 3 axes - Insert turning tool set 16 x 16 mm, 7-piece - 7-piece insert set, 16 x 16 mm - Grooving tool set incl. plates, 6-piece - Machine shoe Ø 160 mm, 8 pcs. on request: - Steady rest - Steady rest - Steady rest with ball bearing guide - Faceplate - 4-jaw faceplate chuck ADVANTAGES Rotary spindle and feed gearbox with quick-change elements Feed reversal Sliding protective cover Gear plate Halogen lamp Coolant pump Emergency stop button Rapid traverse motor Longitudinal slide TECHNICAL DATA Center width 1000 mm Center height 165 mm Turning diameter over bed 325 mm Turning diameter over carriage 190 mm Turning diameter without bridge 440 mm Machine bed width 200 mm Cross slide travel 150 mm Top slide travel 95 mm Turning tool cross-section, max. 16x16 mm Lathe chuck holder (DIN 55027) no. 5 Spindle holder (turning spindle) MK 4 mm Spindle bore 32 mm Speed range 1, infinitely variable 85 - 405 rpm Speed range 2, infinitely variable 470 - 2200 rpm Longitudinal feeds (48) 0.006 - 1.77 mm/rev Transverse feeds (48) 0.003 - 0.885 mm/rev Metric thread dimension (48) 0.1 - 28 mm metric modular thread (19) 0.1 - 1.75 mm Inch thread, threads G (53) 75 - 2.5 G/' Inch modular thread, threads G (19) 70 - 4 G/' Quill holder MK 3 Quill diameter 40 mm Quill travel 100 mm Motor power 2200 W Mains connection 400/50 V/Hz Length (total) 2150 mm Height (total) 1300 mm Weight 770 kg