Used Machines with a clamping force of 250 - 999 kN for sale (287)

Condition: good (used), Year of construction: 2004, Functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, injection pressure: 1.441 bar, TECHNICAL DETAILS Closing side Drive type: fully hydraulic Closing type: Fully hydraulic Construction: tie-bar-less Closing force: 3,500 kN Panel size (h x v): 1,050 mm x 980 mm Tie bar dimension (h x v): 0 mm x 0 mm Installation height: 350 mm / 0 mm Opening travel: 950 mm Plate spacing: 1,300 mm Rotary table size D: - Ejector stroke: 250 mm Ejector force: 83 kN Mold weight: 2,500 kg Dimensions (LxWxH): 7.98 m x 2.22 m x 2.57 m Total weight: 30,750 kg Injection side Screw diameter: 70 mm Stroke volume: 1,039 cm³ Injection pressure: 1,441 bar L/D ratio: 20 Screw geometry: 9 Screw stroke: 270 mm Screw speed: 226 1/min Cshx Dqju R Npuewmsgt Injection flow into the atmosphere: 386 cm³/s Number of heating zones: 5 Pump drive power: 45 kW Heating output: 29 kW EQUIPMENT On-screen text in German Machine including conveyor belt Machine including handling Machine including protective housing Machine without material leveler Leveling elements

Condition: excellent (used), Year of construction: 2001, Krauss Maffei Cjhx Dqjg U Ar Rowmjgt KM 125-50 C year 2001 Closing 50 TO

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 164173, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 550 mm, injection pressure: 1,451 bar, TECHNICAL DETAILS Control: CC 200 Cohxsvpg T Ds Dqwmjgt Clamping force: 400 kN Dimensions of the mounting plates (h x v): 550 mm x 430 mm Mold height (min.): 180 mm Maximum opening width: 530 mm Injection unit Screw diameter: 30 mm Injection volume: 99 cm³ Injection pressure: 1,451 bar MACHINE DETAILS Rated power of the pump motor: 15 kW Net weight with control cabinet: 2.7 t Dimensions (L x W x H): 3.26 m x 1.2 m x 1.8 m

Condition: good (used), Year of construction: 1995, operating hours: 104,536 h, Functionality: fully functional, machine/vehicle number: F40, clamping force: 400 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 49 cm³, mold height (min.): 200 mm, ejector stroke: 125 mm, opening stroke: 350 mm, overall weight: 5,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 63 A, Machine is currently in use. Can be viewed in operation. Cshx Dqwevrftbjmjgt

Condition: used, Year of construction: 1994, operating hours: 32,628 h, Functionality: fully functional, machine/vehicle number: 67314, clamping force: 3 kN, We are selling an SGM that was only used in our company for sampling purposes. Cshsu Ec Tcex Dqwmogt No guarantee. No delivery.

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0 Cgshxsud N Hdo Dqwmst  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: ready for operation (used), Year of construction: 2004, Arburg thermolift 100-2 Tank capacity : 200 l Voltage: 400V Heating : 4.5 kW Blower : 1.68 kW Power : 6.2 kW Cohx Dqevi Iqqswmsgt

Condition: excellent (used), Year of construction: 1991, Engel ES 200/50 HL Closing 50 tons Cgjhx Dqjld Nt Sjwmot Year 1991 Scrow 30 mm EC 88

Year of construction: 2023, Condition: as good as new (ex-display), Krauss Maffei KM 50 - 100 PX injection moulding machine Year of manufacture - 2023 Closing unit 5-point clamping unit with double switch (3 plates), with electric servo drive. Injection unit with electric servo drive and plasticising axes, as well as servo-hydraulic movement of the injection unit. MC6 control based on an industrial PC with real-time Ethernet technology. Plasticising unit complete thermoplasticisation unit screw diameter 22 mm nozzle radius 10 mm, nozzle opening 4 mm Clamping force [kN] 500 Cohopy Drhex Dqwmjgt Clamping plate dimensions (hxv) [mm] 490 x 440 Clearance between columns (hxv) [mm] 370 x 320 Min./ max. mould height [mm] 150 - 450 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 22 Injection volume [cm3] 38 Injection size [g] 35 Injection pressure [bar] 2500 Electric-hydraulic equipment Pump motor rated power [kW] 6.1 Heater power [kW] 6.3 Dimensions and weight Net weight with control unit [t] 4 Dimensions (L x W x H) [m] 4.2 x 1.44 x 1.85

Condition: excellent (used), Year of construction: 2020, operating hours: 9,900 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 25 mm, injection pressure: 2.025 bar, ejector force: 22 N, ejector stroke: 150 mm, TECHNICAL DETAILS Closing force of the mold: 800 kN Mold opening force: 120 kN Clamping platen dimensions (h x v): 640 x 590 mm Clearance between the columns (h x v): 485 x 435 mm Opening stroke of the mold: 350 mm Mold height: 150 - 400 mm Opening width: 750 mm Ejector stroke: 150 mm Cshx Dqjul Uihewmogt Ejector force forwards/backwards: 22 / 10 kN Ejector speed: 350 mm/s Injection unit Screw diameter: 25 mm Ratio Ls/D: 20 Injection pressure: 2.025 bar Injection volume: 49 cm³ Injection weight: 45 g Injection speed: 125 mm/s Injection capacity: 61 cm³/s Screw speed: 382 1/min Plasticizing capacity: 7.8 g/s Torque: 89 Nm Thrust of the nozzle: 21 kN MACHINE DETAILS Net weight with control cabinet: 5.9 t Machine dimensions (L x W x H): 4.80 x 1.60 x 1.88 m Connected load: 6.1 kW Fuse rating: 63 A Installed heating capacity: 6.3 kW Number of cylinder heating zones: 4 Drying time / stroke according to Euromap 6: 1.5 s / 340 mm Oil tank capacity: 120 dm³ EQUIPMENT - Five-point double-lever toggle clamping unit mechanism (three-platen unit) with servo-electric drive - Injection unit with servo-electric drive for injection and plasticizing as well as servo-hydraulic drive for moving the entire injection unit - MC6 control system based on an industrial PC with real-time Ethernet technology - Plasticizing system with a screw diameter of 25 mm, nozzle radius 10 mm, nozzle opening 4 mm

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication Cehoud H Dmox Dqwmjgt  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: ready for operation (used), Year of construction: 1999, Engel ES 200/60HL ST Cgshx Dqovlangswmet Closing 60 TO Year 1999 Scrow 30 mm Enlarged clamping plate 660x560

Condition: excellent (used), Year of construction: 2009, Battenfeld HM 65/210 injection molding machine Year of manufacture - 2009 Control - Unilog B6E Closing unit : - maximum closing force : 650 kN - clearance between columns : 370 x 320 mm - minimum mold height : 225 mm - mold opening path/force : 450/35 mm/kN - maximum possible distance between clamping plates : 675 mm - ejector travel/force : 150/26.4 mm/kN Injection unit : - screw diameter : 30 mm - specific injection pressure : 2042 bar - calculated injection volume : 106 cm3 - L/D ratio of screw : 22 - screw speed : 310 min to -1 - maximum screw torque : 490 Nm - plasticization capacity : 12.0 g/s PS Technical parameters : - power of drive system : 11 kW - dry cycle time according to EUROMAP 6 : 1.8-259 s-mm - oil tank capacity : 200 l Cshx Dqwou U A Ivjmsgt - machine dimensions : 3.6x1.4x2.0 m - weight of the injection machine : 3100 kg

Condition: excellent (used), Year of construction: 2004, Angel Victory 80/45 Tech Closing 45 TOnnen, tie-bar-less Cjhx Dqeh Rawbswmjgt Scrow 22 mm YEAR 2004 CC 200

Year of construction: 2000, Condition: excellent (used), Injection moulding machine Arburg 221 K 350 - 100 U Year of manufacture: 2001 Control type: Selogica Closing system: Knee TECHNICAL DATA Closing force: 350 kN Clearance between columns: 221 mm Plate dimensions: 324 mm x 250 mm Mould size: min. 150 mm - 300 mm Maximum opening distance: 200 mm Max distance between plates: 500 mm Screw diameter: 20 mm Injection volume / Injection weight: 31 ccm / 26 grams PS Injection pressure: 2500 bar GENERAL DATA Cgjhx Dqep At Rdewmst Engine: 7.5 kW Heaters: 4.5 kW Operating hours: On request Dimensions L x W x D: 2.7 m x 1.4 m x 2.2 m Weight: 1060 kg

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Closing 30 tons Year 1992 Cgshx Djuh U Izjqwmjt Scrow 32 Spray weighted 123g

Condition: excellent (used), Year of construction: 1999, Arburg 270S-250-60 year 1999 Closing 25 TO Scrow 22 Cehx Deg D Rkneqwmjgt tie bar from stand 27x27 Spraying weight approx 27g

Condition: excellent (used), Year of construction: 1992, Angel ES 330 /80HL Closing 80 TO year 1992 Cgehshv Ib Aox Dqwmot Scrow 40 mm EC 88 Plates HxW 660x360

Condition: excellent (used), Year of construction: 2003, Engel Victory 330/80 power Closing 80 tons Snow diameter 35 mm Spray weight 158 cm3 Year 2003 Enlarged clamping plate 660x600 Cehx Dqsiubdqswmegt

Condition: excellent (used), Year of construction: 1997, Engel ES 330/90 HL Grinding force 90 tons Year 1997 Cgohx Dqwoi Ac Tpemjt Cutting through knife 35 mm Sprue picker Engel RP-USP 5 year 2001

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Cgshxjpdr Ais Dqwmjt Closing 80 tons Year 1998 Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate 660x560 Mould height min 200 mm

Condition: excellent (used), Year of construction: 2006, Arburg 320C-600-250 Closing 60 tons year 2006 Cohx Djpfcwmjqwmsgt Scrow 25 mm Spars wide 32x32

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 80-390/C2 Grinding force 80 tons Blade diameter 40 mm Cgohx Dqwsix N Tkemot Spraying weight 185 g Year 2001

Condition: good (used), Year of construction: 1990, Battenfeld 300/050 CD Battenfeld 200/050 CD Year 1991 ,1992 Closing 30 TO Closing 20 TO Cehxjfubkmj Dqwmegt Scrow 22 mm Injection weight 30,4 Distance between tie bars 25.4x25.4 Available 2x injection molding machines Battenfeld

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Unllog 4000 Cgjhog Emvhex Dqwmst Closing 60 TO Year 1997 Scrow 30 mm Injection weight approx. 90 g