Condition: used, tank capacity: 14,000 l, GENERAL Equipment: Spray head Design: upright Remarks: Insulation around top head and cylinder, not around bottom head; spray head connection slightly bent and weld seam on the top head cracked; discharge pipe internal diameter approx. 50 mm, widens towards its cut-off end to approx. 65 mm Speed: 13 / 26 rpm External diameter: 2,700 mm Internal diameter: 2,480 mm Total height: 4,100 mm Bdodpjxqc S Usfx Ab Usa Insulation: present Power: 1.5 / 2.2 kW Agitator: beam agitator Agitator component: agitator flange Type of stand: height-adjustable feet Location: Bremen Volume: 14,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,350 mm Last application: Dairy TANK Number of feet: 4 pcs INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manhole / Dome: in cylinder (approx. 350 x 450 mm) Outlet: present MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 2 Agitator arrangement: side-mounted on cylinder AGITATOR 1 Voltage: 400 Volt Bottom bearing:

Condition: used, GENERAL Other: Manufacturer: GRUNDFOS Type: CRN-7 F-P-G-E-HQQE Bedpfx Abexqc Dqo Ujda Power: 1.10 kW Location: Bremen Condition: used

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Spray head Design: upright Remarks: 1 dent in the inner tank (overpressure from the non-functional heating jacket; see photos); insulation jacket with minor dents and partially detached panels; tank has interior residues; mounts for load cells under the feet (3 loose load cells are included in the scope of delivery; these were not considered in the total height specification) Speed: 52 rpm External diameter: 1,900 mm Internal diameter: 1,790 mm Total height: 4,150 mm Agitator manufacturer: Jongia Insulation: available Power: 0.37 kW Agitator: paddle agitator Agitators: 3 agitators Agitator element: propeller Support: feet Location: Bremen Volume: 5,000 liters Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,100 mm Last application: food TANK Number of feet: 3 pcs INSULATION Insulation jacket: bolted Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top head (DN 500) Outlet: 48 mm MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 2 Agitator arrangement: off-center in the top head Speed: 450 / 965 rpm Voltage: 400 V Power: 1.1 / 4.4 kW AGITATOR 1 Agitator manufacturer: Jongia Voltage: 230/400 V Agitator arrangement: central in the top head Agitator equipment: Propeller 3: agitator data no longer reliably readable; probably 460 / 920 rpm Bsdsxqc Sbopfx Ab Usda

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Features: Air/ventilation system, disc valve Design: vertical Speed: 0 - 85 rpm Internal diameter: 820 mm Total height: 1,850 mm Power: 0.75 kW Max. viscosity: 5,000 mPas Top: agitator traverse with folding lid Agitator: blade agitator Base design: PE base Location: Bremen Technical documentation: drawing, CE marking and declaration of conformity, assembly instructions, operating manual Nameplate: Volume: 550 liters Bdsdpfx Aexqc S Iob Uea Product-contact material: V2A 1.4301 (AISI304) Condition: factory-new Cylindrical height: 1,034 mm TANK Max. permissible operating temperature: 80°C EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION External surface: marbled Internal surface: high gloss Material of feet: plastic AGITATOR 1 Voltage: 400 V Agitator arrangement: eccentric in top plate Agitator features: NORD frequency inverter 400V IP55 NORD helical gear unit made with latest aluminum technology Gear unit with stainless steel seal flange and oil leakage indicator Gear unit filled with food-grade Klüber oil Gear motor unpainted

Condition: used, tank capacity: 25,000 l, GENERAL Equipment: Venting/inlet and outlet, spray nozzle, crane lugs Design: vertical Remarks: Manway approx. 345 x 440 mm; wall thickness of lowest cylinder segment: approx. 4.0 mm Internal diameter: 2,600 mm Total height: 6,250 mm Agitator: agitator flange Foot design: height-adjustable feet Location: Bremen Nameplate: Capacity: 25,000 litres Cylinder wall thickness: 3.0 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 4,500 mm Bdodpsxqc T Eefx Ab Uoa Last use: fruit juice industry TANK Specific gravity of medium: 1.4 (to/m³) Number of feet: 3 units EQUIPMENT Manway / Dome: in cylinder Outlet: pipe end approx. Ø 100 mm Note: outlet end cut off MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom plate thickness: 4.0 mm AGITATOR 1 Agitator position: eccentric in top head Top head wall thickness: 3.0 mm

Condition: used, tank capacity: 100,000 l, 100,000 liter heatable/coolable pressure vessel made of V2A stainless steel Bdodpfsyfwq Nex Ab Uja

Year of construction: 2019, condition: used, tank capacity: 1,000 l, 1000 liter pressure vessel made of V2A stainless steel Bdjdpeyfwt Dofx Ab Uea

Condition: used, tank capacity: 1,020 l, GENERAL Design: horizontal Remarks: Cooling system consisting of a copper pipe installed along the entire length of the tank; various manufacturers, therefore slight differences in design (for example, the tank from manufacturer Müller has a different frame and varying pressure ratings compared to the other two tanks, see photos) Heating/Cooling: available Insulation: available Max. permitted operating temperature: 50 °C Max. permitted operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Stand type: Frame Location: outdoor storage Nameplate: Volume: 1,020 liters Double jacket volume: 3.0 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: brewery TANK Max. permitted operating temperature: 50 °C INSULATION Insulating jacket: hermetically welded Insulation material: PU foam Insulation jacket material: stainless steel FEATURES Manhole / Dome: handhole Bdsdpox Dln Sjfx Ab Uoa MATERIAL SPECIFICATION Temperature control system material: copper

Condition: used, tank capacity: 2,400 l, 2400 liter heatable/coolable tank made of V2A stainless steel Bsdpjyfwr Tjfx Ab Ueda

Year of construction: 2000, condition: used, tank capacity: 3,500 l, GENERAL INFORMATION Equipment: Ventilation/inlet and outlet, Spray head, Lifting lugs Design: Vertical Year of manufacture: 2000 Remarks: Feet were originally mounted on load cells, which are no longer present (see photos); According to the nameplate, heating coil is rated for an operating pressure of 3 bar at a temperature of -5°C (see nameplate photos); Manhole diameter 430 mm; Manhole cover suspension incomplete Speed: 910 rpm External diameter: 1,560 mm Internal diameter: 1,350 mm Total height: 3,450 mm Heating/Cooling: available Bdjdjxqc Suspfx Ab Uja Insulation: available Power: 0.55 kW Max. allowable operating overpressure: 3.0 bar Agitator: Propeller Mounting type: Feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Volume: 3,500 liters Double jacket volume: 62.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,500 mm Last application: Laboratory production TANK Bottom: Flat bottom with slope Number of feet: 3 pcs INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole/Dome: On top cover Outlet: DN40 DIN 11851 MATERIAL CHARACTERISTICS Feet material: Stainless steel AGITATOR 1 Voltage: 230/400 volts Agitator arrangement: Side-mounted on the cylinder

Condition: used, tank capacity: 5,000 l, GENERAL Design: vertical Remarks: Frame construction of the legs made of Fe (see photos); calotte bolts of the legs missing; manhole diameter 450 mm Inner diameter: 1,990 mm Total height: 2,650 mm Agitator: agitator flange Support type: legs Location: Bremen Volume: 5,000 liters Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,650 mm Previous application: fruit juice industry TANK Bottom: dished bottom Number of legs: 3 pieces EQUIPMENT Manhole / dome: in top head Outlet: 50 mm MATERIAL QUALITY Legs material: stainless steel AGITATOR 1 Bedpfx Absxqc Tle Uoda Agitator arrangement: eccentric in top head

Condition: used, tank capacity: 1,285 l, GENERAL Equipment: Disk valve, spray head Design: upright/vertical Remarks: According to information from the previous operator, the tanks were most recently used as fermentation tanks in a brewery with an operating pressure of +2 bar. According to the drawing, the tanks were approved for a test pressure of +4 bar. However, a TÜV inspection was not carried out. Manway diameter: 350 mm. On one tank, one height-adjustable cap screw for the feet is missing; on another tank, the manway cover suspension is incomplete. External diameter: 1,160 mm Internal diameter: 1,000 mm Total height: 3,050 mm Heating/Cooling: present Insulation: present Max. overpressure: 2.0 bar Foot design: height-adjustable feet Location: Bremen Technical documentation: drawing Cylinder temperature control: double jacket Volume: 1,285 liters Cylinder wall thickness: 2 mm Bedpfx Asxqcnveb Ujda Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,250 mm Last application: brewery TANK Max. admissible operating temperature: 50 °C Bottom shape: conical bottom Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: stainless steel EQUIPMENT Manway / dome: in top plate Outlet: DN40 DIN 11851 Note: slight residue MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 2 mm Top wall thickness: 2.5 mm

Condition: used, tank capacity: 15,000 l, GENERAL Equipment: Spray head Design: upright Remarks: Bracing between the feet made of standard steel (see photos) Inner diameter: 2,200 mm Total height: 5,900 mm Heating/cooling: available Max. permissible operating temperature: 3 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 1.0 bar Support type: feet Location: Bremen Cylinder temperature control: half-pipe coil Name plate: Volume: 15,000 liters Double jacket volume: 30.0 liters Cylinder wall thickness: 3.5 mm Product-contact material: V2A 1.4301 (AISI304) Bdsdpexqcpgsfx Ab Uea Condition: used Cylindrical height: 3,360 mm Last application: brewery TANK Max. permissible operating temperature: 25 °C Number of feet: 3 pcs EQUIPMENT Manhole/dome: in cylinder (approx. 350 x 450 mm) Outlet: DN80 DIN 11851 Note: slight residues MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.4 mm

Condition: used, Year of construction: 2006, Overview This crossflow filtration system was manufactured in 2006 by Germany Sartorius. The Sartoflow Compact 12 is designed for the gentle clarification of liquids, particularly in wine and beverage applications. The machine is still installed. Information regarding availability, visit possibility, maintenance history and reason for sale is Not provided. The system features a modular design with up to 12 filtration modules, of which 10 modules are functional and 2 modules are defective. Technical data  Capacity: approx. 3,600 – 12,000 L/h Application: Liquid clarification (wine and beverages) Configuration: Crossflow filtration system with hollow fiber membranes, up to 12 modules (10 active) Scope of Delivery  Crossflow filtration system | Sartorius | Sartoflow Compact 12 HF/A | 2006 | Modular system with hollow fiber membranes Filtration modules | Sartorius | 2006 | Max. 12 modules (10 functional, 2 defective) Control system | Siemens | Simatic Multi Panel | Touch control Pump system | Integrated pumps CIP / Backflush system Instrumentation | Pressure sensors, manual valves per module Bdodpfx Abjyycqls Uja

Condition: used, Year of construction: 1969, Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data Capacity: approx. 15,000 L/h Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) Configuration: Multi-tank system (product tank, vacuum tank, saturator) Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) CO₂ content: approx. 6.5 – 7 g/l Electrical: 380 V, 3-phase Drive power: approx. 5.5 – 7.5 kW Scope of Delivery  Premix beverage mixer | Stork Jansen & Sutorius N.V. | 1969 / 2020 | Multi-tank system with carbonation unit Plate heat exchanger | Alfa Laval  Pump unit | Siemens | With motor Control system | Kinco | HMI touchscreen Frequency converter  Bsdpfsyycklox Ab Uoda

Condition: used, Year of construction: 2001, Overview  This shrink packaging machine (film only) was manufactured in 2001 by Italy SMI. The SMI LSK 45 is designed for film-only shrink wrapping of bottles in beverage production lines. The machine operates with 4 infeed lanes and supports multiple pack configurations and bottle formats. It was fully operational prior to dismantling in January 2026 and is currently dismantled. The machine is supplied with technical documentation. Technical data  Capacity: approx. 45 packs/min Formats: 3×2 / 3×3 / 4×3 Bottle formats: 500 ml / 1,000 ml / 1.5 L / 2.0 L Application: Shrink packaging (film only) Configuration: 4-lane infeed system, shrink film wrapping unit, shrink tunnel Scope of Delivery Shrink packaging machine | SMI | LSK 45 | 2001 | Film-only shrink wrapper with 4-lane infeed Shrink tunnel | SMI | 2001 | Integrated shrink tunnel Conveyor system |  With lane separation Control system | Control panel with Gefran temperature controller Bodpfx Asyycgtjb Uoda

Condition: used, Year of construction: 2009, Overview  This rotary roll-fed labelling machine was manufactured in 2009 by France SIDEL. The Rollquattro F15 18T is designed for roll-fed labelling of PET bottles in beverage production lines. The machine operates with a rotary system with 18 bottle plates and is configured with mechanical cam control and manual label splicing.  Technical data Capacity: approx. 18,000 bottles/hour Formats: 0.5 L / 1.0 L / 1.5 L / 2.0 L Application: Roll-fed labelling of PET bottles Configuration: Rotary machine with 18 plates, mechanical cam drive, manual label splicing Utilities: 400 V / 50 Hz / 23 kW / 46 A Scope of Delivery  Labelling machine | SIDEL | Rollquattro F15 18T | 2009 | Rotary roll-fed labeller with 18 plates Cooling unit | Kelvin Cool-Power | External cooling unit Control system | Control panel with process indicators Bodpfxsyyb Snj Ab Usda

Condition: used, Year of construction: 2017, Overview  This rotary stretch blow moulding machine was manufactured in 2017 by Kosme. The machine is designed for the production of PET bottles for beverage applications. It is equipped with 6 cavities and was used for medium-capacity production. The machine has been dismantled in January 2026 and is available without moulds.  Technical data Capacity: approx. 12,000 bottles/hour Formats: up to 3 L PET bottles Application: PET bottle production Configuration: Rotary stretch blow moulding machine, 6 cavities Neck finish: PCO 1881 Scope of Delivery Blow moulding machine | Kosme | KSB 6R | 2017 | 6-cavity rotary machine, without moulds Preform feeding system  Chiller unit  Air conveyor system  Control system | Integrated HMI Bodpfeyybkdsx Ab Usda

Condition: excellent (used), As new Vemag HP3 vacuum filler. Has been used for filling tiny chillies and pieces of pasta with cream cheese. Multi depositing system also available with it - as are the entire factory contents. Was last used in March 2026. Bdsdeyw U Dlepfx Ab Uea

Condition: ready for operation (used), The Alfa Laval Hoyer KF 1150 XC ice cream freezer is a high-performance freezer that can operate with a capacity of up to 900l/h. The freezer is mainly used for ice cream, but can also be used for cooling or freezing products with a similar viscosity. The system was in use until September 2023 and was then professionally dismantled for quick recommissioning. Detailed documentation is available and is included in the offer. Bdodpfxspyhi Rj Ab Usa

Year of construction: 2000, condition: used, Della Toffola NF5 mobile kieselgur plate filter 5 m², Aisi 304 - condition: used Bdsdjt Ebizopfx Ab Usa - location: Bremen - total height: 1.890 mm - total length: 1.200 mm - total width: 2.100 mm - remarks: - Working pressure: +6 Bar; - material in contact w/ medium: Aisi 304; - filter medium: diatoms; 240 l tank with agitator for preparing the diatoms; - agitator arranged eccentrically in the upper bottom; - Agitator element: anchor agitator; - mobile frame on rollers with brake; - Weight: 510 KG

Condition: used, Year of construction: 2007, Condition: used Location: Bremen Other: Bdodpfxehtu U Rs Ab Usa The M-Pulse metal detector is a highly sensitive device for the reliable detection of metallic foreign objects. It uses an inductive measuring method with a balanced coil system. The metal detector is exclusively designed to detect metallic foreign bodies in pasty or liquid media. A more detailed description of the machine can be found in the existing operating instructions.

Condition: used, Padovan Green Filter 18 m² mobile Kieselgur stainless steel plate filter, Aisi 304 - condition: used - location: Bremen - total height: 2.950 mm - total length: 2.250 mm - total width: 1.500 mm Bdjdpfx Ast Eb Azeb Uoa remarks: - Filter medium: diatoms; - tank with agitator for the preparation of diatoms; - Underbody opening diameter: approx. 400 mm;

Condition: used, Seitz Stainless Steel In-Line Filter Holder, AISI304 - condition: used - location: Brem, Germany - remarks: - Make: Seitz Bedot Dw Tmspfx Ab Uoda - Diameter: approx. 340 mm - Total height: approx. 430 mm - 3 feet - Outlet DN 20 DIN 11851 (with different connections (see photos)

Year of construction: 2008, condition: ready for operation (used), Highly efficient production line for the production of molded stick ice cream, popsicles and similar products. Capacity of up to 42,000 pieces per hour (can also be used at a reduced hourly capacity). The currently installed mold size is 35ml moldet stick ice cream. Manufacturing date of the line is 2008. Complete line is for sale, including rotary molding system, automatic stick inserter, wrapper, control panels and other components. Full documentation is available. The line was in use until September 2023 and was then professionally dismantled for rapid recommissioning. Approximate space required for installation: 9 x 4.5 m. Bsdepyha Eopfx Ab Uoda