Condition: used, Holders for grinding wheels: Nedpfx Afecu Idbs Iewb 11 x grinding wheel width 104 mm 4 x grinding wheel width 62 mm small diameter of the mounting cone 50 mm large diameter of the mounting cone 65 mm length 80 mm outer diameter of the flange 280 mm Inner diameter of the flange 203 mm

Condition: used, Headstock Spindle passage 38 mm Collet opening 38 mm Dimensions : L.650 x W.350 x H.450 mm Nwodpfx Aecqb N Sef Isb

Condition: used, Cup grinding machine Make Gustav Brueckner Nwjdpfxscv Tb Dj Af Ieb Type FSH 1 maximum distance : table - grinding wheel 200 mm table surface 315 x 135 mm 380 volt 0,75 kw 1,85 ampere Space requirement : D.650 x W.600 x H.1600 mm

Condition: used, Grinding spindle Make FAG Dimensions of the conical pin of the recording: Diameter 80-61 lg 100 mm intake Cone Diameter min. 68 lg. 70 mm Diameter Max 80 lg. 70 mm Nwsdsc Tuxdopfx Af Ijb min. 61 lg. 100 mm Max. 80 lg. 100 mm Length 500 mm Diameter 200 mm Weight 100 kg DX9UK3MUZNK

Condition: used, Year of construction: 1968, 450 mm Länge x-travel 500 mm workpiece height . mm Nodpfjqwpwzsx Af Iswb

Condition: used, Year of construction: 1994, grinding length 800 mm grinding width 350 mm Nwodpfx Aswlvr Tof Ieb Control Haidenhain Bandfilteraggregat

Year of construction: 2005, operating hours: 22,640 h, condition: ready for operation (used), controller manufacturer: FANUC, controller model: 21i-TB, This 4-axis STUDER S33 cylindrical grinding machine was manufactured in 2005. It features a dynamic balancing unit, Marposs push button insert, and includes 2 CBN grinding discs. The machine also comes with approximately 20 internal grinding mandrels and 3 collets. Consider the opportunity to buy this STUDER S33 cylindrical grinding machine. Contact us for more information about this machine. • Application: Prototype construction (no shift work) • Operating hours: approx. 24,000 • Control: FANUC 21i-TB • Extraction system not included • Annual maintenance • Center height: 175 mm • Center distance: 650 mm • Machine stand: Granitan S 103 • Grinding wheel: 500 x 63 x 203 mm • Linear measuring system Nwsdex D D E Ajpfx Af Ieb • Spindle bore: 30 mm • Workpiece spindle speed: 1–1500 rpm • Workpiece table swivel: 8.5° • Infinitely variable taper angle (scale with 1° increments) • Grinding wheel dressing: radius, angle • Electrical interface for rotary dressing • Electronic handwheel • Maximum peripheral speed: 50 m/s • Constant cutting speed V • Pneumatic spindle lift • Pneumatic tailstock lift • Workpiece drive: 1.6 kW AC servo motor • Coolant pump: 100 L/min at 2.5 bar • Coolant supply via workpiece spindle • Changeover time internal/external grinding: 10 sec • Transition radius/chamfer/cylinder • Internal grinding spindle: 1–20,000 rpm • Foot pedal for movement with door open Additional equipment • Tailstock removal device (included) • PCD dressing plate R 0.5 • Dynamic balancing device with balancing sensors • Grinding detection • Marposs probe insert

Condition: used, Grinding wheel dimensions (od x id x width): 610 x 355 x 304.8 mm Min/max diameter to be ground: 2 / 150 mm Regulating wheel speed steps: infinite Min/max regulating wheel speed (rpm): 10 / 225 rpm Dressing (auto/manual): Automatic - CNC Lubrication (auto/manual): Automatic Control type (CNC/manual): CNC CNC brand: FANUC CNC model: Oi TD Plunge (auto/manual): Automatic Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x 355 mm Maximum plunge grinding length: 355 mm Coolant motor power: 0.70 kW Grinding wheel head motor power: 37 kW Total power: 45 kW Voltage: 220/380V Length: 1,165 mm Width: 3,398 mm Height: 1,700 mm Weight: 14,000 kg Nwedpfsydqfwsx Af Isb Accessories: Inline loader, Coolant filter, Supporting rulers

Condition: good (used), FLOTT TS 200 double bench grinder with MA600 extraction unit 400V Nodpox U Dkvjfx Af Ijwb Grinding wheel diameter: 200 mm

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, Grinding area: 650x350 mm, machine weight: 2,500 kg, in need of repair (for hobbyists / electronics technicians) Nsdoxx Tctepfx Af Iswb

Condition: used, Year of construction: 2000, ja Nsdpfxow Sydxo Af Iowb 094089 spindle speeds: linka 2100 weight of the machine ca. 600 kg

Condition: used, Year of construction: 1995, table-size Breite: 800 mm Njdpfxewp Tuyo Af Iowb table-size Tiefe: 350 mm Dimensions (L/W/H) 4600 x 3200 x 2500 mm weight of the machine ca. 4,5 t

Condition: used, Year of construction: 1989, centre height 250 mm centre distance 600 mm Dimensions (L/W/H) 3600 x 1900 x 2100 mm weight of the machine ca. 2,25 t Nsdpfx Aexzuzcjf Iowb

Condition: used, Year of construction: 2000, grinding length 600 mm grinding width 300 mm Njdpew Hg Uzsfx Af Iewb magnetic clamping plate 600x250 mm wheel diameter 220-300 mm weight 2200 kg

Condition: used, Year of construction: 1960, grinding diameter ca. 360 mm grinding length 1500 mm Nwodpfx Ajw Sya Tof Ieb serial number 12013

Condition: used, Year of construction: 1999, grinding diameter 120 mm Njdpfxew Sybdj Af Iswb centre height 100 mm Stirnschleifeinrichtung Kein Typenschild auffindb

Condition: used, Year of construction: 1999, grinding diameter 300 mm grinding length 500 mm centre height 150 mm digital readout 2 Achs Mitutoyo Ka Counte Knoll PF 70 magnetic chuck ja type Schild nicht auffindbar Nedpfexzu Aajx Af Iswb

Year of construction: 1960, condition: used, Surface grinder with magnet 250 x 135 Nodeiuz Tgopfx Af Ijwb 400 Volt power 1,8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x1500x1800 mm Nwodpfx Afjv A Hgde Ijb Weight 570 kg Total power requirement 3 kw

Condition: ready for operation (used), Vermogen slijpsteen: 15 kWt Besturing: Siemens Sinumerik 840 C Siemens drive: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1270 mm Grindingwidth: 610 mm Longitudinal travel X-axis (autom.): 1310 mm Cross-travel Y-axis (autom.): 565 mm Travel Z-axis (autom.): 470 mm Dimensions of the table: 1215 x 500 mm Distance between table -- spindlecentre: 680 mm Max dia grindingstone: 400 x 100 x 127 mm Spindlespeeds: rpm Motorpower: 30 / 47 kWt Tension needed: 380V - 50Hz Cooling system: yes Njdpfx Afexl Hxhe Iswb

Condition: refurbished (used), Year of construction: 2026, center height: 100 mm, center width: 680 mm, total length: 620 mm, grinding diameter: 199 mm, Condition of the machine: The machine is currently in a used, unrevised condition. All wearing parts of the machine are replaced, including the feed spindle in the X-axis, and all assemblies are restored to a new condition. After the revision, the machine is easily comparable to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to a new condition. After the work is completed, the machine receives a measurement report according to the manufacturer's original specifications. Electronics: The electronics and the control cabinet housing are completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is overhauled and the hydraulic lines are replaced with new lines. Painting: As soon as the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are freed of the old paint, cleaned and repainted. Technical data of the machine: Nwedpfsv Hqlrox Af Ieb Center height: 100 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel: 350 x 50 x 127 Weight and space requirement of the machine: 2600kg // 2320x1400x1450 mm Machine equipment (standard): • 1 piece grinding headstock Ø35 • 1 piece workpiece headstock MK5 • 1 piece protective cover for discs Ø 400 mm • 1 piece tailstock MK 3 standard • 1 piece flange Ø 127 mm • 1 piece hydraulic unit • 1 set of operating tools and operating instructions

Condition: refurbished (used), Year of construction: 2026, Manufacturer: TSCHUDIN Machine type: SL 105U Year of construction: 2024 Njdpfx Asd Adfuof Iowb Workpiece headstock: MK6 Tailstock: MK4 Center height: 175 mm Center width: 1000 mm Grinding length: 1000 mm Control: Siemens 840D SL Space requirement of the machine: 4920x3400x2300

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, Data Machine type: HTG 610 U Workhead: MK5 Tailstock: MK3 Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel left: 350 x 50 x 127 mm Grinding wheel right: 250 x 25 x 127 mm Condition Nwedpjcgtp Esfx Af Iob The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification.

Condition: new, Year of construction: 2026, functionality: fully functional, Data Machine type: HTG 310 Workhead: MK5 Tailstock: MK3 Center height: 100 mm Nwsdpfx Afocgkure Isb Center width: 380 mm Grinding length: 380 mm Grinding wheel: 350 x 50 x 127 mm Condition The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification.

Condition: like new (used), Year of construction: 2022, functionality: limited functionality, grinding length: 450 mm, grinding width: 150 mm, table length: 450 mm, table load: 120 kg, table width: 150 mm, grinding spindle speed: 3,000 rpm, Surface Grinding Machine from Showroom (new) Manufacturer: Okamoto Model: ACC-450 AV (open design) Year of manufacture: 2022 Control: Okamoto FX Operating hours: 0 S/N: XXXX Technical specifications: ----- • Table size: 450x150 mm • Table travel longitudinal/cross: 530x165 mm • Max. table load: 120 kg • Max. grinding height table / new wheel: 397.5 mm • Standard magnetic chuck: 450x150 mm (P=13mm) • Automatic infeed: 0.0001–0.030 mm • Manual micro feed: 0.0001 / 0.001 / 0.01 mm • Spark-out strokes: 0–5 • Rapid traverse: 600 mm/min • Grinding wheel: 205 x 6–19 x 31.75 mm • Speed: 3,000 rpm • Grinding spindle motor: 1.5 kW • Connected load: 7 kVA • Dimensions: 2,000 x 1,430 x 2,265 mm • Machine weight: 1,250 kg Nsdpfx Afjx U Dawo Ijwb Accessories: ----- • Grinding wheel on flange (new) • Paper band filter with 160 l tank • Table dresser + diamond • Work light • Tool kit • Operating manuals