Used hydraulic presses double column / Four column presses for sale (315)

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Pedpfx Amjvuuhgeiogk Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Power capacity 450,0 kW Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way Pjdjvuucqjpfx Amiegk as is where is, WITHOUT dismantling, WITHOUT loading

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, pressing force: 630 t, table width: 2,500 mm, table length: 1,600 mm, overall weight: 100,000 kg, Equipment: safety light barrier, Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply. Podpfx Aov Hp T Usmijgk

Condition: used, Year of construction: 2003, pressure 300 t distance between columns 1640 mm stroke 900 mm Pgjdpfxsvut H Us Amiok Distance table/ram, stroke up 1200 mm table surface area 1600 x 1300 mm table height over floor 890 mm ram surface 1600 x 1300 mm Speed down 400 mm/s Speed up 300 mm/s Working speed 10 mm/s Oil volume 1150 l power requirement 42,5 kW weight 25 t dimensions (WxDxH) 2,8 x 2,5 x 5,0 m year of manufacture 1994 overhaul 2003 permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, ram interlocking, two-hand operation No foundation pit necessary

Condition: used, Year of construction: 1999, Pressure 400 t stroke 800 mm distance between columns 2820 mm Side window 950 x 1100 mm distance table/ram (stroke up) 1600 mm table surface area 2800 x 1200 mm die cushion capacity in table 150 t die cushion stroke in table 200 mm die cushion area in table 2000 x 800 mm table height over floor 650 mm ram surface 2800 x 1200 mm speed down 420 mm/s speed up 300 mm/s working speed 17,5 - 29,5 mm/s oil volume 2500 l power requirement 75,0 + 22,0 kW Weight 50,0 t dimensions (WxDxH) 4,1 x 2,8 x 7,2 m Pgjdpfxev Sva So Amiek height over floor 6,15 m permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, hydraulic ram interlocking, two-hand and four-hand operation

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2350 mm distance table/ram, max. stroke up, adjustment up 1200 mm distance between cutting impact cushioning 1600 mm Distance table/ram, stroke up 1200 mm stroke 800 mm table surface area 2060 x 1260 mm table height over floor 750 mm Die cushion pressure in table 100 t Die cushion stroke in table 400 mm die cushion area 1250 x 1000 mm side window 780 mm ram surface 2200 x 1500 mm Podsvuugvepfx Amisgk Capacity of ejector in ram 63 t speed down 500 mm/s speed up 310 / 410 mm/s working speed 20 - 73 mm/s quantity of oil 3900 l power requirement 80,0 + 45,0 kW weight 55,0 t Dimensions (WxDxH) 4,6 x 2,7 x 7,2 m Height above floor 6,0 m Height below floor 1,2 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, hydraulic ram interlocking can be offered without putting into operation (partly dismantled, in need of overhaul) or alternatively with overhaul and new control Siemens S 7-1500 F

Condition: used, Year of construction: 2018, Pressure 315 t stroke 750 mm distance between columns 1700 mm Distance table/ram, max. stroke up, adjustment up 1250 mm Table surface area 1600 x 1300 mm pressure of drawing cushion in table 125 t Die cushion stroke in table 350 mm Die cushion pressure in ram 1000 x 900 t Ram surface 1600 x 1300 mm Side window 1100 mm feed down 400 mm/s feed up 400 mm/s working feed 12 - 44 mm/s oil volume 2500 l power requirement 35,0 kW Weight 43,50 t dimensions of the machine ca. 3,6 x 3,1 x 6,0 mxmxm height over floor 4,9 mm yom 1987 -> 2018: new electric control Siemens S 7 new ligh guard at the front (Sick C 4000) permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning, ram interlocking, controllable dependant on pressure/time and way, two-hand operation Pgsdpfx Aovuuf Eomiek press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 2011, pressure 620 t Psdpfxsvuudhe Amiogk distance between columns 2250 mm stroke 1250 mm Distance table/ram, max. stroke up, adjustment up 1600 mm table surface area 2200 x 1280 mm ram surface 2200 x 1500 mm table height over floor 800 / 1000 mm column travel -side 750 mm feed down 10 - 250 mm/sec feed up 10 - 500 mm/sec working feed 1 - 24 mm/sec oil volume 2000 l power capacity 45,0 + kW weight 42,0 t Dimensions (WxDxH) 3,7 x 2,6 x 6,8 m year of manufacture 1997 - overhaul 2011 permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, two-hand operation no foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F - video at seller's site before dismantling available

Condition: used, Year of construction: 1954, functionality: fully functional, Used Industrial Press Machine SÜDDEUTSCHE MASCHINENBAU Gesellschaft m.b.H. – Press Type HZ PR150-1000/850 – Year of manufacture: 1954 – Manufacturer: Süddeutsche Maschinenbau Gesellschaft m.b.H., Wiesental/Kreis Bruchsal (renowned German machine builder) – Press force: approx. 150 t (maximum pressing force, equivalent to 1,470 kN) – Working area: approx. 1000 mm × 850 mm (usable height/width, according to type code) – Massive H-frame construction – sturdy and industrial-grade – Mechanically/hydraulically driven pressing or forming press for metal and sheet metal applications – Large clamping or working surface, suitable for pressing, punching, forming, assembly, and joining operations – Robust, solid design; ideal for workshops, series production, or repair operations Condition: Used / operational / technically inspected (please specify condition further: fully functional, overhauled, requires maintenance, etc.) Optional equipment: (Tool holders, clamping devices, controls, safety guards – please specify if available) Fields of application: ✔ Metal forming ✔ Assembly of interference and press fits Pgedpfxoyk Sn Hs Amijk ✔ Drawing, bending, upsetting, and riveting processes ✔ Workshop and maintenance operations

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, press power: max. 630 to. daylight: max. 375 mm stroke: max. 275 mm weight: 4.500 Kg. Podpfxegwv S Ue Amiegk

Condition: good (used), Year of construction: 1989, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Pgjdpfod E U Nnsx Amisk Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: used, Double column press - Hydraulic Manufacturer REPKON Model 2000/800 kN Condition used description Pressure 200 t Column width 1600 mm ram stroke - max. 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Pressing speed 42 mm/s at 40% mm/sec Pressing speed 20 mm/s at 100% mm/sec Die cushion pressure 800 kN Die cushion stroke 150 mm Die cushion speed to 68/ from 225 mm/sec Pgjdpeudb Hcofx Amisk Conversion year: 2001

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 160 t, stroke length: 300 mm, table width: 1,250 mm, table length: 800 mm, installation height: 500 mm, EXNER EX SL 160 double column press NEW Machine is under construction Podjuw S A Djpfx Amisgk Pressing force 1600 kN Installation height: 500 mm stroke: 300 mm Table width: 1250 mm Table depth: 800 mm mech. depth stop

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Mode of operation: oil-hydraulic Table height: 1175 mm Stroke: 305 mm Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Pgodpfxjwxw Ams Amisk Electrics: 550 V / 60 Hz Information without guarantee.

Condition: excellent (used), Year of construction: 2015, With a view to optimized and energy-saving drives in the vehicle industry, significantly higher demands are placed on the components of the drive system. Higher power transmission and higher torques combined with smaller size are the challenges. This development has increased the demand for cold-formed splines. With the Vertical Splines Press (VSP) Sack & Kiesselbach provides the customer with a solution that offers technological and also logistical advantages compared to conventional technologies (such as roller burnishing or broaching). The relatively small and very user-friendly press can be configured both manually and as an automated system. In addition to the splines press, the customer can also obtain the appropriate die system and process technology from a single source. 1 used Vertical Splines Press make Sack & Kiesselbach type VSP 50/30 Year 2015 Pgjdpogtty Tofx Amiok Technical data: Pressing force 500KN ram stroke 450 mm Closing speed 200 mm/s pressing speed 5,5 mm/s opening speed 120 mm/s table dimension 500 x 400 mm installation height 1000mm width between columns 530 mm splines cylinder speed 3-9,5 mm/s Dimensions height 2900 mm width 3100 mm depth 1400 mm Drive power 8 KW Special equipment Digital measuring system Splines tool for internal splines

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 Psdeul U Svjpfx Amisgk serial number 31900 Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW

Condition: used, Year of construction: 1952, Type of machine: Pgodpfx Ajwxw H Esmiek Down-stroking press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of construction: 1952 Pressing force: 500 t Clear gap: 450 mm Location: In Germany

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Psdpfx Aompfwdsmijgk Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. Psdsu Nfhdjpfx Amisgk *

Condition: used, Year of construction: 1997, Technical details: pressure: 160 t distance between columns: 1000 mm stroke: 250 mm dayligth: 600 mm distance table/ram: 600 mm table height over floor: 550 mm table surface area: 810 x 860 mm clamping surface ram: T x B: 720 x 580 mit T-Nuten mm total power requirement: 15 kW weight of the machine ca.: ca. 16,0 t The machine isn't installed yet. The pictures are from the origin location of the former owner. further details: - sideway passage W: 520 x H: 620mm - passage front side W:660mm x H: 600mm equipment: - walkable platform arround the machine= height over floor approx. 2400mm, platform approx. 2700 x 2600 x 1050mm - hydraulic pack - oil cooler i.D. Pjdpfxju Nfmmo Amiegk *

Condition: used, Technical details: pressure: 80 t dayligth: 600 mm ram stroke: 200 mm pressure: 30 t dayligth: 680 mm ram stroke: 300 mm distance between columns: 1060 mm base plate surface area: 1060x600 mm table above floor: 720 mm ram stroke speed: Stößel/ Ram 1: 40 mm/sec ram stroke speed: Stößel/ Ram 2: 95 mm/sec base plate surface area: Dm=150 mm total power requirement: 13 kW Pgjdpfx Aju Nfnwjmijk weight of the machine ca.: 4,5 t space requirement approx.:: L:1,6xB:1,1xH:3,4 m - Press with two ram with 30 t + 80 t - foot control - documentation *

Condition: ready for operation (used), Hydraulic press, single-column high-speed press, C-column press, oil-hydraulic press - Pressing force of the ram: approx. 35 tons -Clamping table: 500 x 470 mm -Insertion height: 650 mm Pjdpfxob A Nkbe Amiogk -Insertion width: 275 mm -Dimensions: 1300/900/H3200 mm -The machine can be dismantled to a height of: 2700 mm -Weight: approx. 1500 kg

Condition: used, Technical details: Total force (nominal): 1000 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 4500 X 2400 mm Total force (nominal): 2-3-4-5- Presse - 1000 to. to table surface area: 2-3-4-5- Presse 4500 X 2200 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Pgedjx Ag Azjpfx Amijk Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6

Condition: used, Technical details: Total force (nominal): 800 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 3200 X 2200 mm Total force (nominal): 2-3-4-5- Presse - 600 to. to table surface area: 2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Pgjdpfx Aex Ag Epjmijk 6-ax

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2374, functionality: not functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 150 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 580 mm, table length: 450 mm, table height: 900 mm, ram plate width: 580 mm, ram plate length: 450 mm, distance table to ram: 430 mm, oil tank capacity: 380 l, total length: 1,200 mm, total width: 1,600 mm, total height: 2,800 mm, overall weight: 4,200 kg, installation height: 430 mm, pressing speed: 25 mm/s, Equipment: documentation/manual, safety light barrier, The press is currently undergoing a complete overhaul. Cylinder seals have been replaced and the hydraulic pump has been tested for functionality. It is equipped with a hydraulic safety block that complies with the latest safety regulations. A completely new electrical system and PLC control, including a front safety light curtain, ensure the press is almost as good as new. Psdpfxjxyxx Ae Amiegk