Used milling machines - univ.NC/CNC 500-699mm X-axis travel for sale (105)

Condition: excellent (used), Year of construction: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control HS, cycle-controlled, year of manufacture 1998, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical specifications: Travel paths X: 500 mm, Y: 430 mm, Z: 400 mm Table size: 800 x 390 mm Spindle taper: ISO 40 Spindle speed: 71 to 3550 rpm, 18 steps Feed rate X and Y: 2 to 1600 mm/min, stepless Feed rate Z: 2 to 1000 mm/min, stepless Rapid traverse X and Y: 1.6 m/min Rapid traverse Z: 1 m/min Spindle drive: 3 kW Power connection: 400 Volt, 50 Hz - Spindle speed adjustable in 18 gear steps - Vertical milling head swivels to the right and left Isdpowyn Rqefx Agzobf - Hydro-mechanical tool clamping vertical and horizontal - Automatic central lubrication - Separate coolant unit - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Required space (L x W x H): 2000 x 1800 x 1950 mm Weight: approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with NC control HS, cycle-controlled, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take this opportunity to view the machine under power on-site and see its condition for yourself.

Condition: excellent (used), Year of construction: 2011, Type: Conventional milling machine Manufacturer: Avia Model: FNE 40P Year of manufacture: 2011 Control: Conventional with digital display Serial number: 90494 Ibsdsxk R Haspfx Agzof Longitudinal travel (X): 620 mm Cross travel (Y): 420 mm Vertical travel (Z): 400 mm Table: 400 x 800 mm Max. workpiece weight: 400 kg Spindle taper: SK 40 Spindle speed: 40 – 4000 rpm Weight: approx. 2000 kg Digital display: Heidenhain ND 780 integrated in the control panel

Condition: excellent (used), Year of construction: 2007, Control: Heidenhain iTNC 530 Table Clamping surface: 1200 x 450 mm T-slots: 6 x 18 H7 mm Maximum load: 400 kg Feeds Longitudinal travel: 650 mm Cross travel: 480 mm Vertical travel: 475 mm Ijdpfexd Tgiox Agzjbf Feed (X, Y, Z): Infinitely variable Rapid traverse X,Y: 6000 mm/min Rapid traverse Z: 4000 mm/min Feed motor AC (Z): 4.0 (10.5) Nm Spindle Speed range: 55 – 4000 rpm Speed control: Frequency controlled, stepless Spindle taper: ISO 40 Spindle power: 7.5 kW Spindle swivel: ± 90° Spindle stroke: 140 mm Weight Net weight: 2100 kg Gross weight: 2300 kg

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table - Electronic handheld control panel - Coolant system Iodpewhm S Njfx Agzebf - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 1996, Machine: Console Milling Machine - Universal Brand: MAHO Type: MH1000 Technical Specifications: - Spindle motor: 5.5 kW - 1500 RPM - Feed motor: 3 kW - 1500 RPM - Pump motor: 0.18 kW - 3000 RPM - 70 l/min - Spindle speeds: (18) 32-1600 RPM - Spindle nose: ISA40 Ibjdpfxoxn Rkgs Agzjf - Drill spindle travel; 125mm - Table dimensions against the column: 570x600mm - X travel: 1000mm - Slide travel: 750mm - Z travel: 600mm - X feeds: 10-5000mm/min - Rapid feed: 1.4m/min - Universal table dimensions: 1250x740mm - 360-degree rotating table - Table tilts longitudinally and transversely by approximately 30 degrees - Machine weight: 5500 kg

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3501100, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10,000 rpm, rapid traverse X-axis: 10 m/min, TECHNICAL DETAILS Travel Paths X-axis travel: 550 mm Y-axis travel: 305 mm Z-axis travel: 460 mm Main Spindle Main spindle speed range: 10 - 10,000 rpm Drive power - main spindle: 11 / 7.5 kW Max. torque: 70 / 48 Nm Tool holder: BT 40 Worktable Clamping surface: 800 x 320 mm Max. table load: 300 kg T-slots: 3x 14 x 100 mm Distance spindle / table: 100 - 600 mm Tool Changer Number of tool stations: 12 Tool holder: BT 40 Max. tool diameter: 70 mm Max. tool weight: 6.0 kg Tool-to-tool change time: 7.0 sec Feed Rates Rapid traverse (X / Y / Z): 10 m/min Feed rate: max. 10,000 mm/min Repeatability: +/- 0.008 mm Positioning accuracy: +/- 0.01 mm MACHINE DETAILS Control: Siemens Sinumerik 808D adv. Ijdpfxoxb Aczs Agzjbf Space & Weight Required space approx.: 3.5 x 2.5 x 2.4 m Machine weight approx.: 2,800 kg Total power requirement: 15 kVA EQUIPMENT Documentation Chip removal system Coolant system Tool changer RENISHAW - Primo touch probe

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Ibsdpoty A Ehsfx Agzjf Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: good (used), Year of construction: 2017, feed length X-axis: 550 mm, feed length Y-axis: 305 mm, feed length Z-axis: 460 mm, CNC x-axis 550 mm y-axis 305 mm z-axis 460 mm BT 40 tool holder 12-position tool changer Main spindle 4 kW up to 10,000 rpm with cooling system Chip conveyor Ibodpfxexpqhzj Agzef Siemens Sinumerik 808 D control

Condition: good (used), For sale: very well-maintained machine from a training workshop CNC Universal Milling Machine MAHO Type MH 400 E Machine No. 42544 Year of manufacture: 1989 Travel X: 400 mm, Y: 250 mm, Z: 375 mm Table size: 700 x 270 mm Distance spindle nose / table max.: 410 mm Tool holder: ISO 40 with drawbar Type B Spindle speed: 80 - 4000 rpm, 18 steps Ibedpfsw A Ratex Agzef Feed rate: 1-1500 mm/min, stepless Rapid traverse (X, Z, and Y): 2.5 m/min Vertical quill travel: 50 mm Spindle drive: 2.2 kW Power supply: 400 Volt, 50 Hz, 19 kVA - Swiveling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - Hydro-mechanical tool clamping - Swing-out device for vertical milling head - Splash guard enclosure around the table with 3 folding doors - Electrical control cabinet fixed to the machine - V24 interface (RS 232) for data transfer - 52,470 operating hours, main switch on - Rigid angle table - Coolant system with coolant pump mounted next to the machine - Central lubrication system Vogel - Operator manual, electrical wiring diagram Kedbheh Ic Ufsh Nzgjlw Space requirements (L x W x H): 2250 x 1800 x 1850 mm Weight: approx. 1.5 tons Good condition

Condition: excellent (used), Year of construction: 1997, Universal milling and drilling machine Manufactured by KUNZMANN. WF 7/3 Year of manufacture: 1997 Technical specifications Make: Kunzmann Type: WF 7/3 Year of manufacture: 1997 X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm Clamping surface: 800 x 425 mm Clamping slots: 6 Slot spacing: 63 mm Max. load: 250 kg Tool holder: SK 40 Quill stroke: 60 mm (vertical) Head can be swiveled 90° to both sides Drive power: 4 kW Dimensions: approx. L 2.0 x W 2.0 x H 2.0 m Weight: approx. 2.0 t (including control cabinet and swivel panel) Equipment - Heidenhain TNC 124 control - Operating instructions - Enclosure - Coolant system - Hydraulic tool clamping All information is subject to change without notice. Ijdswhm Sispfx Agzebf A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 2004, Technical Specifications: Travel X/Y/Z: 650 / 500 / 450 mm Clamping Area: 1000 x 600 mm Spindle Mount: SK 40 Spindle Speed: 6500 rpm Isdowglapopfx Agzjbf Max. Table Load: 400 kg Number of Tool Magazine Positions: 20 Power: 24 kVA Machine Weight, Approx.: 5500 kg Equipment: - Motorized Spindle 12000 rpm - 20-Station Tool Changer - Heidenhain Tool Probe - Heidenhain Workpiece Probe - Heidenhain Handwheel - Menzel Minimum Quantity Lubrication - Approx. 25 Tool Holders

Year of construction: 1987, condition: used, machine/vehicle number: 63658, movement x: 600 mm movement y: 400 mm movement z: 400 mm Isdpfx Agjbv Haaszobf spindle taper: ISO 40 spindle turning speed range: 80 - 4000 rpm carriages continuously adjustable: 0,1 - 1500 mm/min rapid move: x u. y/z 4/2,5 m/min electrical connection: 380 V, 16 kVA kW space needed: 2450 x 2200 x 1900 mm weight: 2250 kg

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 2832-1076, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 390 mm, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 390 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 2,265 mm, total width: 2,410 mm, total length: 2,710 mm, table width: 530 mm, table length: 900 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 800 kg, overall weight: 2,890 kg, input voltage: 380 V, workpiece weight (max.): 800 kg, input current: 44 A, input frequency: 50 Hz, number of spindles: 2, number of slots in tool magazine: 20, Equipment: documentation/manual, Tool holder: SK 40, Control: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer does not work. Otherwise, the machine is fully functional. Operating manual (Machine manual 1), diagnostic manual for the 'DIALOG11' control, machine manual 2 (accessories), programming manuals 1-3, and electrical wiring diagrams are available. The machine can be viewed under power. The machine is bought as is. No warranty. Ibsdpfxewqdtps Agzjf

Condition: good (used), Year of construction: 1991, Travel range: X= 600, Y= 400, Z= 420 mm Ibodpfswvif Ujx Agzjf Speed range: 20 – 4000 rpm Gear stages: 3 Spindle taper: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electronic handwheel, measuring probe (defective)

Condition: excellent (used), Year of construction: 2007, Control: Heidenhain TNC 320 T - Various holders Table Clamping area: 1200 x 450 mm Ibsdpsw U Rpdofx Agzsf T-slots: 6 x 18 H7 mm Maximum load: 400 kg Feed Axes Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm Feed: stepless Rapid traverse X, Y: 4000 mm/min Rapid traverse Z: 1500 mm/min Feed motor AC (Z): 3.0 (10.5) Nm Spindle Speed range: 55 – 3000 rpm Spindle taper: ISO 40 Spindle gearbox: frequency controlled, 2-stage Spindle motor: 7.5 kW Head swiveling: 0–140° Dimensions Length: 2200 mm Width: 1800 mm Height: 2000 mm Weight Net weight: 2100 kg Gross weight: 2300 kg

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, table width: 520 mm, table length: 900 mm, overall weight: 4,500 kg, controller manufacturer: Heidenhain, TECHNICAL DETAILS Table size: 900 x 520 mm MACHINE DETAILS Control: Heidenhain Installation dimensions LxWxH: 3.16 x 3.62 x 2.37 m Weight: 6,000 kg Electrical data Operating voltage: 400 V / 3~ Ibedpfx Asxl Sy Dsgzjf Mains frequency: 50 Hz Control voltage: 24 V Total rated current: 23 A Total power: 16 kVA Weight: 4,500 kg

Condition: used, Technical data: Working range X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Work spindle Tool holder: ISO 40 Automatic feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 1/min, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Rigid table: 700 x 350 mm, 5 T-slots Fixed table: max. load capacity 250 kg Connection: 400 V Weight, approx.: 1900 kg Iedpfxjqbq Ufe Agzjbf Machine dimensions, approx.: 2400 x 1850 x 1850 mm Space requirement: 3200 x 4100 mm, height 1920 mm Features: - CNC control - Fixed table - Milling head swivels +/- 90 - Hydr. clamping device - Coolant device - Emergency stop button

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Hermle UWF 802M with HS 401 Contour Control – Excellent Condition!! Technical Data: - Year of manufacture: approx. 1994, Machine No. 10525 - Fixed angle table - Spindle speed: 17 to 3550 rpm - Infinitely variable feed in 3 axes from 0 to 1600 mm/min - Drive output: 6 kW Isdpfx Aew Sv Iaogzebf - Travel X/Y/Z: 500/430/400 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight: approx. 1,800 kg - Dimensions (LxWxH): 1.8 m x 1.8 m x 1.9 m Accessories and Equipment: - HS 401 contour control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples About the Machine: For sale is a Hermle UWF 802M tool milling machine with HS401 contour control. This universal milling machine is in excellent condition. The contour control is very easy to operate, allowing for length and radius compensation within the program. No advanced CNC knowledge is required. Of course, the Hermle can also be operated manually without the control system. In addition, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very simple by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically inspected by us. Take the opportunity to view and test the Hermle under power at our premises.

Condition: new, x-travel 600 mm y-travel 300 mm z-travel 350 mm table-size 1120 x 260 mm spindle taper ISO 40 Ibedpfxjf Nb Hcs Agzof spindle turning speed range 67 - 2010 U/min quill stroke 120 mm bore capacity in steel 40 mm total power requirement 2,2 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,58 x 1,45 x 2,15 m

Condition: used, Hermle H 2 milling machine with accessories Isdsugv Nwspfx Agzjbf

Condition: excellent (used), Milling Machine MAHO MH 600 W * Max. travel in longitudinal X-axis: 600 mm * Max. travel in transverse Y-axis: 400 mm * Max. travel in vertical Z-axis: 400 mm * Clamping surface/table dimensions: 900 x 480 mm * Spindle power: 5.5 kW Isdpfx Agjw I T Rwjzobf * Spindle taper (ISO): ISO 40 * Speed range: 40 - 4000 rpm * Digital readout: Millplus CNC * Weight: 2900 kg

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Ibjdou Tln Nopfx Agzof Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: good (used), travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, mount diameter: 40 mm, total height: 2,000 mm, total width: 2,000 mm, total length: 2,000 mm, table width: 700 mm, table length: 425 mm, power: 5 kW (6.80 HP), X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 700 x 425 mm Spindle nose: SK 40 Spindle speeds: 1 - 4000 rpm Spindle stroke: 60 mm Featured with: - ISO toolholders - Cooling unit - User Manuals Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg Ibedpfx Aorxry Tjgzof

Condition: good (used), Table Table size : 1070 x 300 mm Nº of T slots: 3 Width: 16 mm Separation : 65 mm Courses Longitudinal ( X) 600 mm Iedpfxehlqi Ao Agzsbf Transversal: 350 mm Vertical console (Manual) : 419 mm Head Head motor power : 3 HP Speed range: 60 a 4000 rpm Main spindle taper: ISO -30 Vertical travel 125 mm Advances and benefits Fast forward speed 6000mm/min Speed max. Forward : 1500mm/min Positioning accuracy + 0,01 Repeatability accuracy 0,008 System resolution 0,001 Weights and measures Net weight:1400 kg Gross weight: 1550 kg Floor area 2400 x 1700 mm Standard equipment Centralized greasing system Cooling system Precision ball screws in X, Y, Z axes Coure limits on three axes

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optimill F 110 E CNC milling machine, direct from the manufacturer. F 110 E – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 808D control, stands out for its performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with ball circulation for high rapid traverse speeds on all axes • Powerful servo drives on all three axes • Telescopic covers on all guideways • Automatic lubrication • Spindle oil cooler • Solid, precision-ground milling table with three oversized T-slots • The portable electronic handwheel with enabling button and emergency stop switch greatly facilitates program setup • Coolant system with chip flushing and cleaning gun • Chip conveyor with auger design • Chip cart • RJ45 interface and 230 V power connection • Enclosed electrical cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of dirt particles • Machine lamp providing over 500 Lux in the working area RJ45 Ethernet port 8.4” LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function: enables easy optimization for higher requirements in dynamics and accuracy Iedpfx Aow Ebv Rogzobf Absolute encoder / no reference run necessary Higher accuracy Travel distances: X = 650 mm Y = 400 mm Z = 500 mm Dimensions and weights Length approx. 2,100 mm Width/depth approx. 2,300 mm Height approx. 2,750 mm Weight approx. 4,100 kg Boring/milling performance Max. cutter head size: 90 mm Electrical data Connection voltage: 400 V Network frequency: 50 Hz Electrical connection Total connected load: 20 kW Horizontal milling table: Length: 850 mm Width: 400 mm Distance spindle nose to table min.: 100 mm Distance spindle nose to table max.: 600 mm T-slot size: 18 mm Number of T-slots: 3 T-slot spacing: 100 mm Maximum load capacity: 400 kg Accuracy Repeat accuracy: ±0.005 mm Positioning accuracy: ±0.005 mm