Condition: good (used), Year of construction: 2011, Ref. no.: 18496 Hersteller: ARBURG Type: 570 C 200-800 Golden Edition Year of construction: 2011 Clamping unit Clamping force: 200 ton Opening stroke: 520 mm Distance between tie bars: 570 X570 mm Mould height min.: 300 mm Opening width: 950 mm Platen size (h x v): 795 X795 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 291 g Injection pressure: 2470 bar Measurements and weight Dimensions: 5,6 X 1,8 X 2,3 m Cgolqjwgp Aue Sz Eyjt Machine weight: 7450 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 77,000 h, Functionality: fully functional, clamping force: 5,000 kN, screw diameter: 100 mm, Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 136 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95/48 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1411 bar Stroke volume 2411 ccm Shot weight (PS) 2194 gr. Injection rate 801 ccm/s Screw speed 189 1/min Plasticising rate max. 161 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,50 x 2,50 m Total machine weight 27090 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads - 2 x 8 fold water flow regulator Additional Options: Cslq Szjwgni Ho Eyegt - 2 x hydr. core pull on movable plate - 2 x hydr. core pull on fix plate - Robot interface according to Euromap 12 - 16 x hotrunner controller - 1 x air valve on movable plate

Condition: excellent (used), Year of construction: 2021, ENGEL DUO 17060/2700 (2021) 🔧 Technical Specifications • Clamping force: 27,000 kN • Tie bar spacing (horizontal × vertical): 2,130 × 1,750 mm • Platen size: 2,970 × 2,640 mm • Mold height (min–max): 800 – 1,900 mm • Opening stroke: 3,100 mm • Max. distance between platens: 5,090 mm • Dry cycle (Euromap 6, 6 mm stroke): 5.8 s • Max. mold weight (fixed/moving platen): 50,000 kg each 🧩 Injection & Plasticizing Unit • Screw type: S4V G18 • Screw diameter: 150 mm Cjlq Sz Ejwd Sywjysgt • Injection volume: 10,780 cm³ • Injection pressure (max): 1,620 bar • Injection speed: 87 mm/s • Plasticizing rate (barrier screw): 235 g/s • Screw speed: up to 115 rpm 🔩 Nozzle & Ejector • Nozzle stroke: 1,300 mm • Nozzle contact force: 210 kN • Ejector stroke: 400 mm • Ejector force: 385 kN ⚙️ Drive & Power • Main motors installed power: 192 kW • Reload pump motor: 16 kW • Oil reservoir capacity: 1,600 liters • Main power: 3×400V, N+PE / 50 Hz ➕ Additional Features & Configuration • T-slot platen with ejector back confirmation • Locating ring Ø 120 mm • Sprue bush “R”: 19 mm • Hydraulic corepull 2+2, air valve 1+1 • Mold heating control with 144 zones (24pin, K-type) • Valve gate interface with 36 zones (16pin DC24V) • Abrasion/corrosion-resistant screw barrel • Servo hydraulic drive • Oil maintenance system • UPS (AVR) backup unit • Robot interface EM67 • Cooling circuit: 1” inlet, 2 zones per platen (90°) • Autoclamp system for fast mold changes

Condition: good (used), Year of construction: 2010, Ref. no.: 18482 Hersteller: KRAUSS MAFFEI Type: KM 300 / 2000 CX Year of construction: 2010 Clamping unit Clamping force: 300 ton Opening stroke: 820 mm Distance between tie bars: 810 X 720 mm Colq Sz Eswgp Anoyegt Mould height min.: 480 mm Opening width: 1300 mm Injection unit Screw diameter: 60 mm Injection volume: 792 cm³ Shot weight: 720 g Injection pressure: 2420 bar Measurements and weight Dimensions: 6,7 X 2,1 X 2,4 m Machine weight: 16400 kg Additional information & extras Accumulator: 1 pcs Robot Producer: Krauss Maffei Type: KM LRX S 250 Year: 2010

Condition: good (used), Year of construction: 2006, Model: HM 210/1000 S Clamping force: 210 t Distance between tie bars: 630 x 570 mm Mould height: 300 mm Daylight max. : 1050 mm Screw diameter: 50 mm Injection pressure: 2016 bar Injection volume: 491 cm3 Shot weight: 440 g Transport parameters: weight 10000 kg, L x W x H: 5000 x 1700 x 2300 mm Csleu Ekbheq Sz Eyogt Controll: Unilog B4 Videos on request.

Condition: good (used), Year of construction: 2004, Ref. no.: 18481 Hersteller: ARBURG Type: 320 C 600 – 250 Year of construction: 2004 Clamping unit Clamping force: 60 ton Opening stroke: 350 mm Distance between tie bars: 320 X 320 mm Mould height min.: 200 mm Platen size (h x v): 446 X 446 mm Injection unit Screw diameter: 25 mm Injection volume: 45 cm³ Shot weight: 40 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 X 1,5 X 1,7 m Colq Sz Eewgp Aheyogt Machine weight: 2330 kg

Condition: good (used), Year of construction: 1995, Ref. no.: 18439 Hersteller: MOTAN Type: LA8-200 Year of construction: 1995 Further information: Cgslewgpz Rsq Sz Eyjt These are 15 drying hoppers with a capacity of 60L each. The conveying devices on them are included in the scope of delivery. Additionally, the two vacuum generators, the two central dryers, and the main control unit are also included.

Condition: good (used), Year of construction: 2001, Ref. no.: 18404 Hersteller: ARBURG Type: 420C-1300-350 Year of construction: 2001 Clamping unit Clamping force: 130 ton Opening stroke: 500 mm Distance between tie bars: 420 x420 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 605 x 605 mm Injection unit Screw diameter: 45 mm Injection volume: 230 cm³ Shot weight: 210 g Colq Sowgpzkez Eyegt Injection pressure: 1670 bar Measurements and weight Dimensions: 4,68 x 1,3 x 2,2 m Machine weight: 5100 kg Additional information & extras Core pull: 1 pcs

Condition: good (used), Year of construction: 2008, Ref. no.: 18383 Hersteller: DEMAG Type: Systec 420-2300 NC5 Year of construction: 2008 Clamping unit Clamping force: 420 ton Opening stroke: 770 mm Distance between tie bars: 820 X 820 mm Mould height min.: 380 mm Mould height max.: 825 mm Platen size (h x v): 1200 X 1100 mm Injection unit Screw diameter: 60 mm Injection volume: 890 cm³ Cgoljwgpzdsq Sz Eyet Shot weight: 810 g Injection pressure: 2420 bar Measurements and weight Dimensions: 8,2 X 2,2 X 2,4 m Machine weight: 22300 kg Additional information & extras Core pull: 4 pcs Air valve: 7 pcs Hot runner systems: 8 pcs.

Condition: good (used), Year of construction: 1997, Ref. no.: 18368 Celq Szewgpy Hj Eyegt Hersteller: ARBURG Type: 320 S 500-150 Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 320 X 320 mm Mould height min.: 300 mm Mould height max.: 550 mm Platen size (h x v): 446 X 446 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 75 g Injection pressure: 2200 bar Measurements and weight Dimensions: 3,25 x 1.15 x 2,0 m Machine weight: 2250 kg

Condition: good (used), Year of construction: 1998, Ref. no.: 18333 Hersteller: DEMAG Type: 330-1450 NC4 Year of construction: 1998 Clamping unit Clamping force: 330 ton Opening stroke: 675 mm Distance between tie bars: 710 x 630 mm Mould height min.: 330 mm Mould height max.: 710 mm Platen size (h x v): 1040 X 950 mm Injection unit Screw diameter: 50 mm Injection volume: 530 cm³ Shot weight: 480 g Injection pressure: 2426 bar Cgjlq Sowgpymsz Eyet Measurements and weight Dimensions: 6,5 X 2,0 X 2,3 m Machine weight: 14300 kg

Condition: good (used), Year of construction: 2001, Ref. no.: 18331 Cgolq Szjwgpygj Eyst Hersteller: ARBURG Type: 320 S 500-150 Year of construction: 2001 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 320 x 320 mm Mould height min.: 225 mm Opening width: 575 mm Platen size (h x v): 446 x446 mm Injection unit Screw diameter: 25 mm Injection volume: 54 cm³ Shot weight: 49 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 12 x 1,9 m Machine weight: 2250 kg

Condition: good (used), Year of construction: 2003, Ref. no.: 18330 Hersteller: ARBURG Type: 320 S 500-150 /60 with turntable Year of construction: 2003 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 320 X 320 mm Mould height min.: 225 mm Mould height max.: 575 mm Platen size (h x v): 446 X 446 mm Injection unit Screw diameter: 25 + 15 mm Injection volume: 39 + 20 cm³ Cjlq Szswgpyao Eyogt Shot weight: 35 + 18 g Injection pressure: 2210 bar Measurements and weight Dimensions: 3,5 X 1,2 x 1,9 m Machine weight: 2250 kg

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Hersteller: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Cgelq Szswgpx No Eyot Robot Producer: Wittman Type: W743 Year: 2009

Condition: good (used), Year of construction: 1997, Ref. no.: 18142 Hersteller: DEMAG Type: Ergotech pro 50-270 Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Celowgpx Asq Sz Eyjgt Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg

Condition: good (used), Year of construction: 2006, Ref. no.: 18140 Hersteller: BATTENFELD Type: 25/50 Unilog B2 Year of construction: 2006 Cgolq Sz Eowgpxvsyet Clamping unit Clamping force: 25 ton Opening stroke: 450 mm Distance between tie bars: 270 X 270 mm Mould height min.: 150 mm Injection unit Screw diameter: 14 mm Injection volume: 15 cm³ Shot weight: 7 g Injection pressure: 2650 bar Measurements and weight Dimensions: 2,25 X 0,90 X 1,30 m Machine weight: 1100 kg

Condition: good (used), Year of construction: 2006, Ref. no.: 18138 Hersteller: DEMAG Type: IntElect 80-370-100 NC 4 All electric Year of construction: 2006 Clamping unit Clamping force: 80 ton Opening stroke: 850 mm Distance between tie bars: 370 X 370 mm Mould height min.: 200 mm Mould height max.: 510 mm Platen size (h x v): 600 x 600 mm Cgslqswgpxpe Sz Eyjt Injection unit Screw diameter: 22 mm Injection volume: 37 cm³ Shot weight: 32 g Injection pressure: 2580 bar Measurements and weight Dimensions: 4,50 X 1,28 X 1,95 m Machine weight: 4750 kg

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Hersteller: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Cgelq Sz Ejwgpxisyot

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Hersteller: ARBURG Cgolqswgpxcs Sz Eyot Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg

Condition: good (used), Year of construction: 2011, Ref. no.: 17514 Hersteller: BILLION Type: H 80-50 Select Year of construction: 2011 Cgelqowgpw Se Sz Eyjt Clamping unit Clamping force: 50 ton Opening stroke: 250 mm Distance between tie bars: 350 x 300 mm Mould height min.: 150 mm Mould height max.: 400 mm Platen size (h x v): 490 x 440 mm Injection unit Screw diameter: 25 mm Injection volume: 39 cm³ Shot weight: 35 g Injection pressure: 2040 bar Measurements and weight Dimensions: 3,7 x 1,4 x 1,8 m Machine weight: 3200 kg Additional information & extras Hot runner systems: 6 pcs.

Condition: good (used), Year of construction: 1998, Ref. no.: 17507 Hersteller: DEMAG Type: ERGOtech system 800-310 Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Colq Sswgpw Ejz Eyjgt Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg

Condition: good (used), Year of construction: 2008, Ref. no.: 171 Cgolq Szowgpwxj Eyot Hersteller: ENGEL Type: VC 1050H/200W/200V(TOP4)/400 Combi-WP 6K Year of construction: 2008 Clamping unit Clamping force: 400 ton Opening width: 1008 mm Platen size (h x v): 1300 x 1460 mm Injection unit Screw diameter: 50 mm Injection volume: 422 cm³ Shot weight: 0 g Injection pressure: 2322 + 00 + + + + bar Measurements and weight Machine weight: 22000 + 6600 kg Dimensions LxWxH part 1: 5 x 2,3 x m Dimensions LxWxH part 2: 3,9 x 2,3 x m

Condition: good (used), Year of construction: 2008, Ref. no.: 17147 Hersteller: ENGEL Type: VC 1050H/200W/200V(TOP4)/400 Combi-WP 5K Year of construction: 2008 Clamping unit Clamping force: 400 ton Opening stroke: 1008 mm Cslq Sewgpwrjz Eysgt Platen size (h x v): 1360 x 1460 mm Injection unit Screw diameter: 60 mm Injection volume: 608 cm³ Shot weight: 7 g Injection pressure: 17 + + + + bar Measurements and weight Machine weight: 22.000 + 6.600 kg Dimensions LxWxH part 1: 5 x 2,3 x m Dimensions LxWxH part 2: 3,9 x 2,3 x m

Condition: good (used), Year of construction: 2004, Ref. no.: 17146 Hersteller: ENGEL Type: ES 750H/80W/(500V)/300HL-2F Year of construction: 2004 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Injection unit Screw diameter: 50 + 25 mm Injection volume: 393 + 49 cm³ Shot weight: 354 + 44 g Injection pressure: 1917 + 1586 bar Celqjwgpwls Sz Eyjgt Measurements and weight Dimensions: 6,5 x 2,3 x m Machine weight: 21000 kg

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Hersteller: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Cgslq Sswgpwfjz Eyjt Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg